Taper Square End Mills (Carbide)

• You can add up to 6 items per a category to the compare list. Compare

  

  2-flute, Tapered Blade, Short Type FX-MG-TPDS

  OSG

  FX coating enables high efficiency and long service life. Can be used with a wide range of materials, from general materials to hardened steel.

  • Volume Discount

  Single corner (θ)(Degree)	Tip diameter (D)(φ)	Type	work material	Blade length (l)(mm)	R Size(mm)	Number of flutes(sheet)	Shank diameter (d)(mm)	Overall Length (L)(mm)	Coating
  0.5 ～ 20	0.5 ～ 12	Tapered square	general steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[○] / High Hardness Steel-HRC60[○] / Stainless Steel[○] / Cast Iron[◎] / Aluminum[○] / Titanium[○] / Copper[○]	2 ～ 40	-	2	3 ～ 20	40 ～ 120	TiAlN

  From: 2,094,276 VND
  Days to Ship: Số ngày giao hàng: 6 Day(s) or more

  6 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  TSC series carbide tapered end mill, 2-flute / regular model

  MISUMI

  [Features]·Since the cutting edge has been processed into a sharp corner, it is also possible to machining corner edges·It has coating with high oxidation resistance and high hardness, and achieves a long service lifespan. Effective in high-speed machining and dry machining as coating properties·Can be regrinded. Please refer to the page dedicated to "regrinding service" for usage procedures, range of services, prices, etc.

  • Volume Discount

  • TS
  • General Steel
  • 2 Flutes
  • R (Regular)

  Single corner (θ)(Degree)	Tip diameter (D)(φ)	Type	work material	Blade length (l)(mm)	R Size(mm)	Number of flutes(sheet)	Shank diameter (d)(mm)	Overall Length (L)(mm)	Coating
  0.5 ～ 30	0.5 ～ 6	Tapered square	general steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○]	2 ～ 24	-	2	4 ～ 12	50 ～ 70	For High Hardness (Silicon Group)

  From: 1,236,469 VND
  Days to Ship: Số ngày giao hàng: Same day or more

  Same day or more

• You can add up to 6 items per a category to the compare list. Compare

  

  C-CTE 4000, UT Coat, 4-Flute Tapered

  UNION TOOL

  [Features]· Taper end mill with extensive variations from taper half angle of 30' to 7°

  Single corner (θ)(Degree)	Tip diameter (D)(φ)	Type	work material	Blade length (l)(mm)	R Size(mm)	Number of flutes(sheet)	Shank diameter (d)(mm)	Overall Length (L)(mm)	Coating
  0.5 ～ 7	3 ～ 10	Tapered square	general steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[◎] / Stainless Steel[◎] / Cast Iron[○] / Copper[○]	10 ～ 35	-	4	6 ～ 16	50 ～ 90	TiCN

  From: 1,594,608 VND
  Days to Ship: Số ngày giao hàng: 5 Day(s) or more

  5 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  NER-2 Trapezoidal Runner End Mill

  NS TOOL

  [Work Material]○: Carbon steel, steel alloy/tool steel, heat-treated steel, stainless steel, resin◎; copper, aluminum alloy

  Single corner (θ)(Degree)	Tip diameter (D)(φ)	Type	work material	Blade length (l)(mm)	R Size(mm)	Number of flutes(sheet)	Shank diameter (d)(mm)	Overall Length (L)(mm)	Coating
  7 ～ 15	2 ～ 6	Tapered square	general steel[◎] / Quenched and tempered steel[◎] / Stainless Steel[◎] / Aluminum[◎] / Copper[◎] / Resin[◎]	5 ～ 12	-	2	4 ～ 12	45 ～ 75	Non-Coated

  From: 2,470,994 VND
  Days to Ship: Số ngày giao hàng: 6 Day(s) or more

  6 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Carbide Solid Tapered End Mill CSTE

  EIKOSHA

  Carbide tapered square end mill (carbide).[Features]· End mill with a tapered blade for machining of inclined parts.[Applications]· Optimal for milling taper parts.· Optimal for tapered-wall machining.

  Single corner (θ)(Degree)	Tip diameter (D)(φ)	Type	work material	Blade length (l)(mm)	R Size(mm)	Number of flutes(sheet)	Shank diameter (d)(mm)	Overall Length (L)(mm)	Coating
  1ﾟ ～ 30'	0.5 ～ 16	Tapered square	general steel[◎] / Quenched and tempered steel[○] / Stainless Steel[○] / Cast Iron[◎] / Aluminum[◎] / Copper[◎] / Graphite[○]	2 ～ 65	-	2	3 ～ 32	35 ～ 140	Non-Coated

  From: 1,504,314 VND
  Days to Ship: Số ngày giao hàng: 6 Day(s) or more

  6 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  X Coated Taper End Mill NTE-2X

  NS TOOL

  [Work Material]○: Stainless steel, aluminum alloy, copper, resin◎: Carbon steel, steel alloy/tool steel, heat-treated steel

  Single corner (θ)(Degree)	Tip diameter (D)(φ)	Type	work material	Blade length (l)(mm)	R Size(mm)	Number of flutes(sheet)	Shank diameter (d)(mm)	Overall Length (L)(mm)	Coating
  0.5 ～ 1.5	0.5 ～ 2.5	Tapered square	general steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[○] / Stainless Steel[○] / Aluminum[○] / Copper[○]	2 ～ 4	-	2	3 ～ 4	35 ～ 45	TiCN

  From: 2,491,846 VND
  Days to Ship: Số ngày giao hàng: 6 Day(s) or more

  6 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Carbide Solid Taper End Mill (Medium)

  EIKOSHA

  Taper square end mill with strong hardness (carbide).[Features]·Tapered edge shape for machining inclined parts with equal helix.[Applications]·Ideal for taper milling.

  Single corner (θ)(Degree)	Tip diameter (D)(φ)	Type	work material	Blade length (l)(mm)	R Size(mm)	Number of flutes(sheet)	Shank diameter (d)(mm)	Overall Length (L)(mm)	Coating
  1ﾟ ～ 30'	0.5 ～ 10	Tapered square	general steel[◎] / Quenched and tempered steel[○] / Stainless Steel[○] / Cast Iron[◎] / Aluminum[◎] / Copper[◎] / Graphite[○]	4 ～ 40	-	2	3 ～ 25	40 ～ 110	Non-Coated

  From: 1,537,953 VND
  Days to Ship: Số ngày giao hàng: 6 Day(s) or more

  6 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  TSC series carbide tapered end mill, 4-flute / for deep ribbing

  MISUMI

  [Features]·Since the cutting edge has been processed into a sharp corner, it is also possible to machining corner edges·It has coating with high oxidation resistance and high hardness, and achieves a long service lifespan. Effective in high-speed machining and dry machining as coating properties

  • Volume Discount

  • TS
  • General Steel
  • 4 Flutes

  Single corner (θ)(Degree)	Tip diameter (D)(φ)	Type	work material	Blade length (l)(mm)	R Size(mm)	Number of flutes(sheet)	Shank diameter (d)(mm)	Overall Length (L)(mm)	Coating
  0.5 ～ 2	0.4 ～ 2	Tapered square	general steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[○] / High Hardness Steel-HRC60[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○]	2 ～ 12	-	4	3 ～ 4	40 ～ 50	For High Hardness (Silicon Group)

  From: 1,722,224 VND
  Days to Ship: Số ngày giao hàng: Same day or more

  Same day or more

• You can add up to 6 items per a category to the compare list. Compare

  

  TSC series carbide tapered ball end mill, 4-flute / long model

  MISUMI

  [Features]·Blade length can be selected according to depth of rib groove (Choose shortest blade length possible to maintain rigid)·It has coating with high oxidation resistance and high hardness, and achieves a long service lifespan. Effective in high-speed machining and dry machining as coating properties·Can be regrinded. Please refer to the page dedicated to "regrinding service" for usage procedures, range of services, prices, etc.

  • Volume Discount

  • TS
  • General Steel
  • 4 Flutes
  • L (Long)

  Single corner (θ)(Degree)	Tip diameter (D)(φ)	Type	work material	Blade length (l)(mm)	R Size(mm)	Number of flutes(sheet)	Shank diameter (d)(mm)	Overall Length (L)(mm)	Coating
  0.5 ～ 2	-	Taper ball	general steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[○] / High Hardness Steel-HRC60[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○]	4 ～ 30	0.3 ～ 1.25	4	4 ～ 6	45 ～ 70	For High Hardness (Silicon Group)

  From: 1,717,808 VND
  Days to Ship: Số ngày giao hàng: 4 Day(s) or more

  4 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  TSC series carbide tapered end mill, 4-flute / regular

  MISUMI

  [Features]·Adoption of 4-flute shape makes it ideal for machining sloped side surfaces·It has coating with high oxidation resistance and high hardness, and achieves a long service lifespan. Effective in high-speed machining and dry machining as coating properties·Can be regrinded. Please refer to the page dedicated to "regrinding service" for usage procedures, range of services, prices, etc.

  • Volume Discount

  • TS
  • General Steel
  • 4 Flutes
  • R (Regular)

  Single corner (θ)(Degree)	Tip diameter (D)(φ)	Type	work material	Blade length (l)(mm)	R Size(mm)	Number of flutes(sheet)	Shank diameter (d)(mm)	Overall Length (L)(mm)	Coating
  0.5 ～ 5	3 ～ 10	Tapered square	general steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[○] / High Hardness Steel-HRC60[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○]	12 ～ 35	-	4	4 ～ 16	60 ～ 90	For High Hardness (Silicon Group)

  From: 1,721,981 VND
  Days to Ship: Số ngày giao hàng: Same day or more

  Same day or more

• You can add up to 6 items per a category to the compare list. Compare

  

  MTE230 MUGEN-COATING Tapered End Mill

  NS TOOL

  [Features]・ MUGEN coating allows long taper machining lifespan.・ Available in series with sizes of ø0.2 to ø10 and one angle of 30' to 20° (ø6 or less).

  Single corner (θ)(Degree)	Tip diameter (D)(φ)	Type	work material	Blade length (l)(mm)	R Size(mm)	Number of flutes(sheet)	Shank diameter (d)(mm)	Overall Length (L)(mm)	Coating
  0.5 ～ 20	0.2 ～ 10	Tapered square	general steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[◎] / Stainless Steel[◎] / Aluminum[◎] / Titanium[○] / Copper[◎] / Resin[◎]	0.8 ～ 35	-	2	4 ～ 20	45 ～ 100	TiAlN

  From: 1,463,003 VND
  Days to Ship: Số ngày giao hàng: 6 Day(s) or more

  6 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  X Coated Taper End Mill NTE-4X

  NS TOOL

  [Work Material]○: Stainless steel, aluminum alloy, copper, resin◎: Carbon steel, steel alloy/tool steel, heat-treated steel

  Single corner (θ)(Degree)	Tip diameter (D)(φ)	Type	work material	Blade length (l)(mm)	R Size(mm)	Number of flutes(sheet)	Shank diameter (d)(mm)	Overall Length (L)(mm)	Coating
  0.5 ～ 5	3 ～ 10	Tapered square	general steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[○] / Stainless Steel[○] / Aluminum[○] / Copper[○]	10 ～ 35	-	4	6 ～ 10	50 ～ 85	TiCN

  From: 2,533,354 VND
  Days to Ship: Số ngày giao hàng: 6 Day(s) or more

  6 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Taper end mill 2 flutes

  ATOM

  A small diameter taper end mill that standardizes maximum taper angles up to 15 degrees.

  Single corner (θ)(Degree)	Tip diameter (D)(φ)	Type	work material	Blade length (l)(mm)	R Size(mm)	Number of flutes(sheet)	Shank diameter (d)(mm)	Overall Length (L)(mm)	Coating
  1° ～ 30′	0.1 ～ 3	Tapered square	general steel[○] / Quenched and tempered steel[○] / Stainless Steel[○] / Aluminum[◎] / Resin[◎]	0.5 ～ 12	-	2	3 ～ 10	35 ～ 50	-

  From: 1,616,248 VND
  Days to Ship: Số ngày giao hàng: 6 Day(s) or more

  6 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  

  

  TSC series carbide tapered ball end mill (for engraving), 1-flute / crescent model

  MISUMI

  [Features]·R of tip is also effective in suppressing chipping·Half-moon shape with good discharge of cutting chip even with small diameter·It has coating with high oxidation resistance and high hardness, and achieves a long service lifespan. As coating characteristic, it is effective in high-speed machining and dry machining

  • Volume Discount

  • TS
  • General Steel
  • 2 Flutes
  • S (Short)

  Single corner (θ)(Degree)	Tip diameter (D)(φ)	Type	work material	Blade length (l)(mm)	R Size(mm)	Number of flutes(sheet)	Shank diameter (d)(mm)	Overall Length (L)(mm)	Coating
  -	-	Taper ball	general steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[○] / High Hardness Steel-HRC60[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○]	-	0.1 ～ 0.3	1	4	45	For High Hardness (Silicon Group)

  From: 1,308,480 VND
  Days to Ship: Số ngày giao hàng: 4 Day(s) or more

  4 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  2-flute, Tapered Blade, Short Type MG-TPDS

  OSG

  A high-toughness carbide is used to achieve long lifespan in the medium and low speed range.

  Single corner (θ)(Degree)	Tip diameter (D)(φ)	Type	work material	Blade length (l)(mm)	R Size(mm)	Number of flutes(sheet)	Shank diameter (d)(mm)	Overall Length (L)(mm)	Coating
  0.5 ～ 7	1 ～ 12	Tapered square	general steel[○] / Quenched and tempered steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○]	5 ～ 40	-	2	4 ～ 20	45 ～ 110	Non-Coated

  From: 2,017,359 VND
  Days to Ship: Số ngày giao hàng: 6 Day(s) or more

  6 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  4-flute, Tapered Blade, Short Type MG-TPMS

  OSG

  A high-toughness carbide is used to achieve long lifespan in the medium and low speed range.

  Single corner (θ)(Degree)	Tip diameter (D)(φ)	Type	work material	Blade length (l)(mm)	R Size(mm)	Number of flutes(sheet)	Shank diameter (d)(mm)	Overall Length (L)(mm)	Coating
  0.5 ～ 3	2 ～ 12	Tapered square	general steel[○] / Quenched and tempered steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○]	8 ～ 30	-	4	4 ～ 12	45 ～ 90	Non-Coated

  From: 2,234,144 VND
  Days to Ship: Số ngày giao hàng: 6 Day(s) or more

  6 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  For Rib Grooves, Taper End Type FXS-RB-TPE

  OSG

  A high-stiffness taper end mill that enables highly efficient machining of rib. It can also be used for side machining other than grooves.

  Single corner (θ)(Degree)	Tip diameter (D)(φ)	Type	work material	Blade length (l)(mm)	R Size(mm)	Number of flutes(sheet)	Shank diameter (d)(mm)	Overall Length (L)(mm)	Coating
  0.5 ～ 3	0.4 ～ 3	Tapered square	general steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[○] / High Hardness Steel-HRC60[○] / Stainless Steel[○] / Cast Iron[◎] / Titanium[○] / Copper[○]	2 ～ 40	-	multi-edged	3 ～ 8	35 ～ 80	TiAlN

  From: 2,708,041 VND
  Days to Ship: Số ngày giao hàng: 6 Day(s) or more

  6 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Carbide End Mill (Trapezoidal Runner) MG-TRC

  OSG

  A taper flute end mill that can be used for trapezoidal runner machining. Uses high-toughness carbide.

  Single corner (θ)(Degree)	Tip diameter (D)(φ)	Type	work material	Blade length (l)(mm)	R Size(mm)	Number of flutes(sheet)	Shank diameter (d)(mm)	Overall Length (L)(mm)	Coating
  7 ～ 15	2 ～ 6	Tapered square	general steel[○] / Quenched and tempered steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○]	4 ～ 12	-	2	4 ～ 12	45 ～ 75	Non-Coated

  From: 2,596,895 VND
  Days to Ship: Số ngày giao hàng: 6 Day(s) or more

  6 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Carbide Tapered End Mill NTE-2

  NS TOOL

  [Work Material]○: Carbon steel, steel alloy/tool steel, heat-treated steel, stainless steel, copper◎: aluminum alloy, resin

  Single corner (θ)(Degree)	Tip diameter (D)(φ)	Type	work material	Blade length (l)(mm)	R Size(mm)	Number of flutes(sheet)	Shank diameter (d)(mm)	Overall Length (L)(mm)	Coating
  0.5 ～ 20	0.5 ～ 3	Tapered square	general steel[◎] / Quenched and tempered steel[◎] / Stainless Steel[○] / Aluminum[◎] / Copper[◎] / Resin[◎]	2 ～ 10	-	2	3 ～ 10	35 ～ 70	Non-Coated

  From: 2,033,883 VND
  Days to Ship: Số ngày giao hàng: 6 Day(s) or more

  6 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Tapered Long Blade End Mill NTEL-2

  NS TOOL

  [Work Material]○: Carbon steel, steel alloy/tool steel, heat-treated steel, stainless steel, resin◎; copper, aluminum alloy

  Single corner (θ)(Degree)	Tip diameter (D)(φ)	Type	work material	Blade length (l)(mm)	R Size(mm)	Number of flutes(sheet)	Shank diameter (d)(mm)	Overall Length (L)(mm)	Coating
  0.5 ～ 20	1 ～ 3	Tapered square	general steel[◎] / Quenched and tempered steel[◎] / Stainless Steel[○] / Aluminum[◎] / Copper[◎] / Resin[◎]	10 ～ 20	-	2	4 ～ 16	45 ～ 100	Non-Coated

  From: 2,637,419 VND
  Days to Ship: Số ngày giao hàng: 6 Day(s) or more

  6 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  MRT425 MUGEN-COATING Tapered End Mill for Deep Ribbing

  NS TOOL

  NS's original high stiffness design enables high-precision and high-efficiency machining.[Work Material]○: Heat-treated steel, hardening steel (Up to 55 HRC), stainless steel, titanium alloy, aluminum alloy, resin◎: Carbon steel, steel alloy/tool steel, copper

  Single corner (θ)(Degree)	Tip diameter (D)(φ)	Type	work material	Blade length (l)(mm)	R Size(mm)	Number of flutes(sheet)	Shank diameter (d)(mm)	Overall Length (L)(mm)	Coating
  0.25 ～ 3	0.2 ～ 3	Tapered square	general steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[◎] / Stainless Steel[◎] / Aluminum[◎] / Titanium[○] / Copper[◎] / Resin[◎]	2 ～ 40	-	4	3 ～ 6	40 ～ 80	TiAlN

  From: 1,444,905 VND
  Days to Ship: Số ngày giao hàng: 6 Day(s) or more

  6 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Carbide Tapered End Mill NTE-4

  NS TOOL

  [Work Material]○: Carbon steel, steel alloy/tool steel, heat-treated steel, stainless steel, resin◎: Aluminum alloy, copper

  Single corner (θ)(Degree)	Tip diameter (D)(φ)	Type	work material	Blade length (l)(mm)	R Size(mm)	Number of flutes(sheet)	Shank diameter (d)(mm)	Overall Length (L)(mm)	Coating
  0.5 ～ 15	3 ～ 10	Tapered square	general steel[◎] / Quenched and tempered steel[◎] / Stainless Steel[○] / Aluminum[◎] / Copper[◎] / Resin[○]	10 ～ 35	-	4	6 ～ 10	50 ～ 85	Non-Coated

  From: 2,117,096 VND
  Days to Ship: Số ngày giao hàng: 6 Day(s) or more

  6 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Tapered Long Blade End Mill NTEL-4

  NS TOOL

  [Work Material]○: Carbon steel, steel alloy/tool steel, heat-treated steel, stainless steel, resin◎: Aluminum alloy, copper

  Single corner (θ)(Degree)	Tip diameter (D)(φ)	Type	work material	Blade length (l)(mm)	R Size(mm)	Number of flutes(sheet)	Shank diameter (d)(mm)	Overall Length (L)(mm)	Coating
  0.5 ～ 2.5	3 ～ 6	Tapered square	general steel[◎] / Quenched and tempered steel[◎] / Stainless Steel[○] / Aluminum[◎] / Copper[◎] / Resin[○]	20 ～ 35	-	4	6 ～ 10	60 ～ 85	Non-Coated

  From: 2,970,465 VND
  Days to Ship: Số ngày giao hàng: 6 Day(s) or more

  6 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Tapered Medium Blade End Mill NTEM-2

  NS TOOL

  [Work Material]○: Carbon steel, steel alloy/tool steel, heat-treated steel, stainless steel, resin◎: Aluminum alloy, copper

  Single corner (θ)(Degree)	Tip diameter (D)(φ)	Type	work material	Blade length (l)(mm)	R Size(mm)	Number of flutes(sheet)	Shank diameter (d)(mm)	Overall Length (L)(mm)	Coating
  0.5 ～ 20	1 ～ 4	Tapered square	general steel[◎] / Quenched and tempered steel[◎] / Stainless Steel[○] / Aluminum[◎] / Copper[◎] / Resin[◎]	5 ～ 20	-	2	4 ～ 16	50 ～ 90	Non-Coated

  From: 2,221,160 VND
  Days to Ship: Số ngày giao hàng: 6 Day(s) or more

  6 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  X Coated Taper Medium Blade End Mill NTEM-2X

  NS TOOL

  Medium type taper end mill.Tool material, Ultrafine grain cemented carbideHelix angle, 30°Surface treatment, X coatingNo. of Flutes: 2Machining applications: Grooving, side milling

  Single corner (θ)(Degree)	Tip diameter (D)(φ)	Type	work material	Blade length (l)(mm)	R Size(mm)	Number of flutes(sheet)	Shank diameter (d)(mm)	Overall Length (L)(mm)	Coating
  0.5 ～ 15	0.5 ～ 6	Tapered square	general steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[○] / Stainless Steel[○] / Aluminum[○] / Copper[○]	4 ～ 30	-	2	3 ～ 16	35 ～ 90	Non-Coated

  From: 2,845,548 VND
  Days to Ship: Số ngày giao hàng: 6 Day(s) or more

  6 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Taper Long End Mill for Copper Electrode / Aluminum / Plastic DTEL

  NS TOOL

  Adopts a dedicated flute shape and dedicated carbide to maintain sharp cutting edge. A higher-grade finishing surface precision can be obtained.

  Single corner (θ)(Degree)	Tip diameter (D)(φ)	Type	work material	Blade length (l)(mm)	R Size(mm)	Number of flutes(sheet)	Shank diameter (d)(mm)	Overall Length (L)(mm)	Coating
  0.5 ～ 5	1 ～ 8	Tapered square	Aluminum[◎] / Copper[◎] / Resin[◎]	8 ～ 64	-	2	4 ～ 20	50 ～ 130	Non-Coated

  From: 2,824,696 VND
  Days to Ship: Số ngày giao hàng: 6 Day(s) or more

  6 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Taper End Mill for Copper Electrode / Aluminum / Plastic DTE

  NS TOOL

  Special blade shape and carbide maintain high sharpness for a long period of time. Produces a higher grade finished surface accuracy

  Single corner (θ)(Degree)	Tip diameter (D)(φ)	Type	work material	Blade length (l)(mm)	R Size(mm)	Number of flutes(sheet)	Shank diameter (d)(mm)	Overall Length (L)(mm)	Coating
  0.5 ～ 1.5	1 ～ 10	Tapered square	Aluminum[◎] / Copper[◎] / Resin[◎]	4 ～ 35	-	2	4 ～ 10	45 ～ 85	Non-Coated

  From: 1,971,523 VND
  Days to Ship: Số ngày giao hàng: 6 Day(s) or more

  6 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Carbide Air Wheel Solid Taper End Mill

  EIKOSHA

  Graphite Electrode Milling, with Air Wheel

  Single corner (θ)(Degree)	Tip diameter (D)(φ)	Type	work material	Blade length (l)(mm)	R Size(mm)	Number of flutes(sheet)	Shank diameter (d)(mm)	Overall Length (L)(mm)	Coating
  0.5 ～ 7	4 ～ 12	Tapered square	general steel[○] / Aluminum[◎] / Copper[◎] / Graphite[◎]	25 ～ 50	-	2	6 ～ 20	90 ～ 120	Non-Coated

  From: 3,262,790 VND
  Days to Ship: Số ngày giao hàng: 6 Day(s) or more

  6 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Carbide Graphite Solid Tapered End Mill GTE

  EIKOSHA

  [Features]· For graphite electrode machining.· 2-flute type.

  Single corner (θ)(Degree)	Tip diameter (D)(φ)	Type	work material	Blade length (l)(mm)	R Size(mm)	Number of flutes(sheet)	Shank diameter (d)(mm)	Overall Length (L)(mm)	Coating
  1ﾟ ～ 30'	4 ～ 12	Tapered square	Aluminum[◎] / Copper[◎] / Graphite[◎]	25 ～ 50	-	2	6 ～ 20	90 ～ 120	Non-Coated

  From: 3,384,098 VND
  Days to Ship: Số ngày giao hàng: 6 Day(s) or more

  6 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Carbide Solid Tapered End Mill (Long) CSTEL

  EIKOSHA

  [Features]· 2-flute carbide solid tapered end mill.· Long blade.· For wall tapering.

  Single corner (θ)(Degree)	Tip diameter (D)(φ)	Type	work material	Blade length (l)(mm)	R Size(mm)	Number of flutes(sheet)	Shank diameter (d)(mm)	Overall Length (L)(mm)	Coating
  1ﾟ ～ 30'	1 ～ 6	Tapered square	general steel[◎] / Quenched and tempered steel[○] / Stainless Steel[○] / Cast Iron[◎] / Aluminum[◎] / Copper[◎] / Graphite[○]	10 ～ 35	-	2	4 ～ 12	50 ～ 90	Non-Coated

  From: 2,372,668 VND
  Days to Ship: Số ngày giao hàng: 6 Day(s) or more

  6 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Carbide Solid Taper End Mill

  CARMEX

  Single corner (θ)(Degree)	Tip diameter (D)(φ)	Type	work material	Blade length (l)(mm)	R Size(mm)	Number of flutes(sheet)	Shank diameter (d)(mm)	Overall Length (L)(mm)	Coating
  -	5.2 ～ 10	Tapered square	-	12 ～ 32	-	4	6 ～ 12	58 ～ 84	-

  From: 3,043,106 VND
  Days to Ship: Số ngày giao hàng: 23 Day(s)

  23 Day(s)

BrandNhãn hiệu
Product SeriesDòng sản phẩm
From
Days to ShipSố ngày giao hàng
SpecificationsĐặc điểm kĩ thuật
Single corner (θ)(Degree)
Tip diameter (D)(φ)
Type
work material
Blade length (l)(mm)
R Size(mm)
Number of flutes(sheet)
Shank diameter (d)(mm)
Overall Length (L)(mm)
Coating

	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare
BrandNhãn hiệu	OSG	MISUMI	UNION TOOL	NS TOOL	EIKOSHA	NS TOOL	EIKOSHA	MISUMI	MISUMI	MISUMI	NS TOOL	NS TOOL	ATOM	MISUMI	OSG	OSG	OSG	OSG	NS TOOL	NS TOOL	NS TOOL	NS TOOL	NS TOOL	NS TOOL	NS TOOL	NS TOOL	NS TOOL	EIKOSHA	EIKOSHA	EIKOSHA	CARMEX
Product SeriesDòng sản phẩm	2-flute, Tapered Blade, Short Type FX-MG-TPDS	TSC series carbide tapered end mill, 2-flute / regular model	C-CTE 4000, UT Coat, 4-Flute Tapered	NER-2 Trapezoidal Runner End Mill	Carbide Solid Tapered End Mill CSTE	X Coated Taper End Mill NTE-2X	Carbide Solid Taper End Mill (Medium)	TSC series carbide tapered end mill, 4-flute / for deep ribbing	TSC series carbide tapered ball end mill, 4-flute / long model	TSC series carbide tapered end mill, 4-flute / regular	MTE230 MUGEN-COATING Tapered End Mill	X Coated Taper End Mill NTE-4X	Taper end mill 2 flutes	TSC series carbide tapered ball end mill (for engraving), 1-flute / crescent model	2-flute, Tapered Blade, Short Type MG-TPDS	4-flute, Tapered Blade, Short Type MG-TPMS	For Rib Grooves, Taper End Type FXS-RB-TPE	Carbide End Mill (Trapezoidal Runner) MG-TRC	Carbide Tapered End Mill NTE-2	Tapered Long Blade End Mill NTEL-2	MRT425 MUGEN-COATING Tapered End Mill for Deep Ribbing	Carbide Tapered End Mill NTE-4	Tapered Long Blade End Mill NTEL-4	Tapered Medium Blade End Mill NTEM-2	X Coated Taper Medium Blade End Mill NTEM-2X	Taper Long End Mill for Copper Electrode / Aluminum / Plastic DTEL	Taper End Mill for Copper Electrode / Aluminum / Plastic DTE	Carbide Air Wheel Solid Taper End Mill	Carbide Graphite Solid Tapered End Mill GTE	Carbide Solid Tapered End Mill (Long) CSTEL	Carbide Solid Taper End Mill
From	2,094,276 VND	1,236,469 VND	1,594,608 VND	2,470,994 VND	1,504,314 VND	2,491,846 VND	1,537,953 VND	1,722,224 VND	1,717,808 VND	1,721,981 VND	1,463,003 VND	2,533,354 VND	1,616,248 VND	1,308,480 VND	2,017,359 VND	2,234,144 VND	2,708,041 VND	2,596,895 VND	2,033,883 VND	2,637,419 VND	1,444,905 VND	2,117,096 VND	2,970,465 VND	2,221,160 VND	2,845,548 VND	2,824,696 VND	1,971,523 VND	3,262,790 VND	3,384,098 VND	2,372,668 VND	3,043,106 VND
Days to ShipSố ngày giao hàng	6 Day(s) or more	Same day or more	5 Day(s) or more	6 Day(s) or more	6 Day(s) or more	6 Day(s) or more	6 Day(s) or more	Same day or more	4 Day(s) or more	Same day or more	6 Day(s) or more	6 Day(s) or more	6 Day(s) or more	4 Day(s) or more	6 Day(s) or more	6 Day(s) or more	6 Day(s) or more	6 Day(s) or more	6 Day(s) or more	6 Day(s) or more	6 Day(s) or more	6 Day(s) or more	6 Day(s) or more	6 Day(s) or more	6 Day(s) or more	6 Day(s) or more	6 Day(s) or more	6 Day(s) or more	6 Day(s) or more	6 Day(s) or more	23 Day(s)
SpecificationsĐặc điểm kĩ thuật		TS General Steel 2 Flutes R (Regular)						TS General Steel 4 Flutes	TS General Steel 4 Flutes L (Long)	TS General Steel 4 Flutes R (Regular)				TS General Steel 2 Flutes S (Short)
Single corner (θ)(Degree)	0.5 ～ 20	0.5 ～ 30	0.5 ～ 7	7 ～ 15	1ﾟ ～ 30'	0.5 ～ 1.5	1ﾟ ～ 30'	0.5 ～ 2	0.5 ～ 2	0.5 ～ 5	0.5 ～ 20	0.5 ～ 5	1° ～ 30′	-	0.5 ～ 7	0.5 ～ 3	0.5 ～ 3	7 ～ 15	0.5 ～ 20	0.5 ～ 20	0.25 ～ 3	0.5 ～ 15	0.5 ～ 2.5	0.5 ～ 20	0.5 ～ 15	0.5 ～ 5	0.5 ～ 1.5	0.5 ～ 7	1ﾟ ～ 30'	1ﾟ ～ 30'	-
Tip diameter (D)(φ)	0.5 ～ 12	0.5 ～ 6	3 ～ 10	2 ～ 6	0.5 ～ 16	0.5 ～ 2.5	0.5 ～ 10	0.4 ～ 2	-	3 ～ 10	0.2 ～ 10	3 ～ 10	0.1 ～ 3	-	1 ～ 12	2 ～ 12	0.4 ～ 3	2 ～ 6	0.5 ～ 3	1 ～ 3	0.2 ～ 3	3 ～ 10	3 ～ 6	1 ～ 4	0.5 ～ 6	1 ～ 8	1 ～ 10	4 ～ 12	4 ～ 12	1 ～ 6	5.2 ～ 10
Type	Tapered square	Tapered square	Tapered square	Tapered square	Tapered square	Tapered square	Tapered square	Tapered square	Taper ball	Tapered square	Tapered square	Tapered square	Tapered square	Taper ball	Tapered square	Tapered square	Tapered square	Tapered square	Tapered square	Tapered square	Tapered square	Tapered square	Tapered square	Tapered square	Tapered square	Tapered square	Tapered square	Tapered square	Tapered square	Tapered square	Tapered square
work material	general steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[○] / High Hardness Steel-HRC60[○] / Stainless Steel[○] / Cast Iron[◎] / Aluminum[○] / Titanium[○] / Copper[○]	general steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○]	general steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[◎] / Stainless Steel[◎] / Cast Iron[○] / Copper[○]	general steel[◎] / Quenched and tempered steel[◎] / Stainless Steel[◎] / Aluminum[◎] / Copper[◎] / Resin[◎]	general steel[◎] / Quenched and tempered steel[○] / Stainless Steel[○] / Cast Iron[◎] / Aluminum[◎] / Copper[◎] / Graphite[○]	general steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[○] / Stainless Steel[○] / Aluminum[○] / Copper[○]	general steel[◎] / Quenched and tempered steel[○] / Stainless Steel[○] / Cast Iron[◎] / Aluminum[◎] / Copper[◎] / Graphite[○]	general steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[○] / High Hardness Steel-HRC60[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○]	general steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[○] / High Hardness Steel-HRC60[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○]	general steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[○] / High Hardness Steel-HRC60[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○]	general steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[◎] / Stainless Steel[◎] / Aluminum[◎] / Titanium[○] / Copper[◎] / Resin[◎]	general steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[○] / Stainless Steel[○] / Aluminum[○] / Copper[○]	general steel[○] / Quenched and tempered steel[○] / Stainless Steel[○] / Aluminum[◎] / Resin[◎]	general steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[○] / High Hardness Steel-HRC60[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○]	general steel[○] / Quenched and tempered steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○]	general steel[○] / Quenched and tempered steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○]	general steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[○] / High Hardness Steel-HRC60[○] / Stainless Steel[○] / Cast Iron[◎] / Titanium[○] / Copper[○]	general steel[○] / Quenched and tempered steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○]	general steel[◎] / Quenched and tempered steel[◎] / Stainless Steel[○] / Aluminum[◎] / Copper[◎] / Resin[◎]	general steel[◎] / Quenched and tempered steel[◎] / Stainless Steel[○] / Aluminum[◎] / Copper[◎] / Resin[◎]	general steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[◎] / Stainless Steel[◎] / Aluminum[◎] / Titanium[○] / Copper[◎] / Resin[◎]	general steel[◎] / Quenched and tempered steel[◎] / Stainless Steel[○] / Aluminum[◎] / Copper[◎] / Resin[○]	general steel[◎] / Quenched and tempered steel[◎] / Stainless Steel[○] / Aluminum[◎] / Copper[◎] / Resin[○]	general steel[◎] / Quenched and tempered steel[◎] / Stainless Steel[○] / Aluminum[◎] / Copper[◎] / Resin[◎]	general steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[○] / Stainless Steel[○] / Aluminum[○] / Copper[○]	Aluminum[◎] / Copper[◎] / Resin[◎]	Aluminum[◎] / Copper[◎] / Resin[◎]	general steel[○] / Aluminum[◎] / Copper[◎] / Graphite[◎]	Aluminum[◎] / Copper[◎] / Graphite[◎]	general steel[◎] / Quenched and tempered steel[○] / Stainless Steel[○] / Cast Iron[◎] / Aluminum[◎] / Copper[◎] / Graphite[○]	-
Blade length (l)(mm)	2 ～ 40	2 ～ 24	10 ～ 35	5 ～ 12	2 ～ 65	2 ～ 4	4 ～ 40	2 ～ 12	4 ～ 30	12 ～ 35	0.8 ～ 35	10 ～ 35	0.5 ～ 12	-	5 ～ 40	8 ～ 30	2 ～ 40	4 ～ 12	2 ～ 10	10 ～ 20	2 ～ 40	10 ～ 35	20 ～ 35	5 ～ 20	4 ～ 30	8 ～ 64	4 ～ 35	25 ～ 50	25 ～ 50	10 ～ 35	12 ～ 32
R Size(mm)	-	-	-	-	-	-	-	-	0.3 ～ 1.25	-	-	-	-	0.1 ～ 0.3	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-
Number of flutes(sheet)	2	2	4	2	2	2	2	4	4	4	2	4	2	1	2	4	multi-edged	2	2	2	4	4	4	2	2	2	2	2	2	2	4
Shank diameter (d)(mm)	3 ～ 20	4 ～ 12	6 ～ 16	4 ～ 12	3 ～ 32	3 ～ 4	3 ～ 25	3 ～ 4	4 ～ 6	4 ～ 16	4 ～ 20	6 ～ 10	3 ～ 10	4	4 ～ 20	4 ～ 12	3 ～ 8	4 ～ 12	3 ～ 10	4 ～ 16	3 ～ 6	6 ～ 10	6 ～ 10	4 ～ 16	3 ～ 16	4 ～ 20	4 ～ 10	6 ～ 20	6 ～ 20	4 ～ 12	6 ～ 12
Overall Length (L)(mm)	40 ～ 120	50 ～ 70	50 ～ 90	45 ～ 75	35 ～ 140	35 ～ 45	40 ～ 110	40 ～ 50	45 ～ 70	60 ～ 90	45 ～ 100	50 ～ 85	35 ～ 50	45	45 ～ 110	45 ～ 90	35 ～ 80	45 ～ 75	35 ～ 70	45 ～ 100	40 ～ 80	50 ～ 85	60 ～ 85	50 ～ 90	35 ～ 90	50 ～ 130	45 ～ 85	90 ～ 120	90 ～ 120	50 ～ 90	58 ～ 84
Coating	TiAlN	For High Hardness (Silicon Group)	TiCN	Non-Coated	Non-Coated	TiCN	Non-Coated	For High Hardness (Silicon Group)	For High Hardness (Silicon Group)	For High Hardness (Silicon Group)	TiAlN	TiCN	-	For High Hardness (Silicon Group)	Non-Coated	Non-Coated	TiAlN	Non-Coated	Non-Coated	Non-Coated	TiAlN	Non-Coated	Non-Coated	Non-Coated	Non-Coated	Non-Coated	Non-Coated	Non-Coated	Non-Coated	Non-Coated	-

Loading...Tải…