(!) Since support from Microsoft will end on January 14th, 2020, Windows 7 will be excluded from the recommended environment from December 15th, 2019 on this site. Vì lý do Microsoft kết thúc hỗ trợ cho Windows 7 vào ngày 14/01/2020, Windows 7 sẽ là hệ điều hành không được khuyến khích sử dụng với trang web này từ ngày 15/12/2019.

Tel: 0222-361-1555 Email: [email protected] 8:00 - 17:00 (Mon - Sat)

ものづくりの、明日を支える。MISUMI-VONA 生産材コマースものづくりの、明日を支える。MISUMI-VONA 生産材コマース

Webcode Seach | Series: #CODE

Keyword suggestionsTừ khóa gợi ý

Part number suggestionsGợi ý mã sản phẩm

Discontinued Products

Search by Category / Brand Tìm theo danh mục, nhãn hiệu

Search by Category Tìm theo danh mục

[Thông báo] Cập nhật địa chỉ kho tập kết hàng hóa tại khu vực miền Nam của MISUMI Việt Nam. Xem chi tiết.
[Announcement] Update on warehouse address in the Southern region of MISUIMI Vietnam. See more. 
[Cảnh Báo] Thủ Đoạn Lừa Đảo Từ Nhân Viên Giao Hàng – Yêu Cầu Trả Phí Ship. Xem chi tiết.
[Warning] Fraud Calling from Shipper - Asking to Pay Shipping Fee. See more.

How can we improve?

How can we improve?

Comments

Name (Optional)

E-mail Address (Optional)

Tel (Optional)

While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
Customer Privacy Policy

Thank you for your cooperation.

While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
Please use the inquiry form.

Customer Privacy Policy

My Components Thêm v
Similar ProductsSản phẩm tương tự
Product Detail
CAD Data unavailable Dữ liệu CAD không khả dụng

ConfigureTạo

Part number has not been determine

(90 Part Numbers Available)

Configure Remaining SpecificationsĐịnh cấu hình các thông số còn lại

Part Number CompleteĐã hoàn thành

E-FXAA3-[2-30/1]-F[3-50/1]

Shaft Diameter (mm) Material Surface Treatment Hardness Thread Length N Material Thread Length Ordering Code M (Coarse) H Dimension Thread Length N Shaft Shoulder Dimension F Y type Days to Ship

Specification/DimensionsĐặc điểm kỹ thuật / Kích thướcĐặc điểm kỹ thuật / Kích thước

Shaft Diameter (mm)(mm)
3

4

5

6

8

10

12

15
ClearTrống
Material
- Steel
- Stainless Steel
ClearTrống
Surface Treatment
- Not Provided
- Black Oxide
- Electroless Nickel Plating
ClearTrống
Hardness
- Hardness Spec-designed
- Hardness Not Spec-designed
ClearTrống
Thread Length N(mm)
[3-24/1mm Unit(s)]
ClearTrống
Material
- Tempered steel hardness HRC30～
- Austenitic stainless steel
- General structural steel or carbon steel
ClearTrống
Thread Length Ordering Code
- Thread Length Configurable
- Thread Length Selectable
ClearTrống
M (Coarse)
- 3
- 4
- 5
- 6
- 8
- 10
- 12
ClearTrống
H Dimension(mm)
7

8

9

10

11

12

13

14

15

16

17

20
ClearTrống
Thread Length N(mm)
- 4.5
- 6
- 7.5
- 9
- 12
- 15
- 18
ClearTrống
Shaft Shoulder Dimension
- Standard
- Widened
ClearTrống
F(mm)
[3-150/1mm Unit(s)]
ClearTrống
Y(mm)
[2-60/1mm Unit(s)]
ClearTrống
type
- E-FXAA
- E-FXNAA
- E-HFXAA
- E-PFXAA
- E-PFXNAA
- E-SFXAA
- E-SFXNAA
ClearTrống

Days to ShipSố ngày giao hàng

Alltất cả các

9 Day(s) or Less
ClearTrống

Specify AlterationsChỉ định thay đổi

Cantilever Shafts Standard, Retaining Ring Groove (Part Number)

Name: Cantilever Shafts Standard, Retaining Ring Groove
Brand: MISUMI
Availability: PreOrder

Brand :

MISUMI

MiSUMi Economy

MISUMI

Part Number :

E-FXAA3-[2-30/1]-F[3-50/1]

E-FXAA3A-[2-30/1]-F[3-50/1]

E-FXAA4-[2-30/1]-F[3-50/1]

E-FXAA4A-[2-30/1]-F[3-50/1]

E-FXAA5-[2-30/1]-F[3-50/1]

E-FXAA5A-[2-30/1]-F[3-50/1]

E-FXAA6-[2-60/1]-F[5-100/1]

E-FXAA6A-[2-60/1]-F[5-100/1]

E-FXAA8-[2-60/1]-F[5-100/1]

E-FXAA8A-[2-60/1]-F[5-100/1]

E-FXAA10-[2-60/1]-F[5-100/1]

E-FXAA10A-[2-60/1]-F[5-100/1]

E-FXAA12-[2-60/1]-F[10-150/1]

E-FXAA15-[2-60/1]-F[10-150/1]

E-FXNAA3-[2-30/1]-F[3-50/1]-N[3-6/1]

E-FXNAA3A-[2-30/1]-F[3-50/1]-N[3-6/1]

E-FXNAA4-[2-30/1]-F[3-50/1]-N[4-8/1]

E-FXNAA4A-[2-30/1]-F[3-50/1]-N[4-8/1]

E-FXNAA5-[2-30/1]-F[3-50/1]-N[5-10/1]

E-FXNAA5A-[2-30/1]-F[3-50/1]-N[5-10/1]

E-FXAA3-[2-30/1]-F[3-50/1]

Order Qty :
Price :

---
Total Price :

---
Days to ship :

---

Select part number to Order Now/ Add to Cart

CAD Data unavailable

Product Overview

The cantilever pin can be used as the pivot point of rotary parts such as idlers. The pivot point is similar to the axis of a hinge, and the connected parts can make rotary movements.

Dimensional Drawing

Specifications Overview

Type		D[Φ:mm]	Equivalent Material	Surface Treatment
Thread Length Fixed	Thread Length Configurable
E-FXAA	E-FXNAA	4~15	General structural steel or carbon steel	Ferroferric Oxide Protective Film
E-PFXAA	E-PFXNAA			Electroless Nickel Plating
E-SFXAA	E-SFXNAA		Austenitic stainless steel	－
E-HFXAA	－		Tempered steel hardness HRC30～	Ferroferric Oxide Protective Film

If there are requirements for rust prevention, give priority to products made of austenitic stainless steel and with surface treatment of electroless nickel plating.

HFXAA is only applicable to D6, 8 and 10.

Specification Table

Part Number		Dg7		1mm increments			H	W	M	d		m	n
Type	No.			Y	F	N			(Coarse Thread)	Reference Dimension	Tolerance
Thread Length Selectable E-FXAA E-PFXAA E-SFXAA E-HFXAA (D≥6) Thread Length Configurable E-FXNAA E-PFXNAA E-SFXNAA	3	3	-0.003 -0.012	2~30	3~50	3～ 6	7	5	M 3	2	＋ 0.060 0	0.5	2
	3A						11	9
	4	4	-0.004 -0.016			4～ 8	8	6	M 4	3		0.7
	4A						12	10
	5	5				5~10	9	7	M 5	4	＋ 0.075 0
	5A						13	11
	6	6		2~60	5~100	6~12	10	8	M 6	5
	6A						14	12
	8	8	-0.005 -0.020			8~16	12	10	M 8	7	＋ 0.090 0	0.9	3
	8A						16	14
	10	10				10~20	15	13	M10	9.6	0 -0.09	1.15
	10A						20	17
	12	12	-0.006 -0.024		10~150	12~24	17	14	M12	11.5	0 -0.11		4
	15	15					20	17		14.3

If there are requirements for rust prevention, give priority to products made of austenitic stainless steel and with surface treatment of electroless nickel plating.

The dimension of wrench flats is 15 when Y≥17.

N is available for Thread Length Configurable Type only.

HFXAA is only applicable to D6, 8 and 10.

Product Features

Feature 1: It has a tolerance of g7 and is used in conjunction with idlers, pulleys, sprockets, etc.
Feature 2: Available in various shapes. The product types include Threaded with Retaining Ring Groove type, Threaded Tapped End type, Inlay Threaded Threaded End type, Bolt Mounted Tapped End type, Flanged type, etc.
Feature 3: Products made of stainless steel (austenitic stainless steel) with excellent anti-rust performance and products with the surface treatment of electroless nickel plating are available for selection to solve the problem of rusting.
Feature 4: L Dimension Configurable type, freely selectable in 1mm increments to accommodate different use environments.
Feature 5: Thread length fixed type with relative low price is available.

Precautions

①Anti-rust specification selection and maintenance
If there are requirements for rust prevention, give priority to products made of austenitic stainless steel and with surface treatment of electroless nickel plating.
Products without surface treatment need to be applied antirust oil regularly for maintenance.
②For dimensions of male thread relief groove, refer to the Specification Table.
③This product has no accessory retaining ring. If you need a retaining ring, please select the alteration SET.
④The shapes, specifications and materials of matching retaining rings are as follows.
■Retaining ring shapes:
No.3~No.8(D=3~8): E-shaped retaining ring
No.10~No.15(D=10~15):C-shaped retaining ring
■Retaining ring specification: JIS nominal specifications For details, refer to

Retaining Ring Specifications
■Retaining ring materials:

Cantilever Pin		Retaining Ring
Corresponding Material	Surface Treatment	Material
General structural steel or carbon steel	Ferroferric Oxide Protective Film	Spring Steel
	Electroless Nickel Plating	SUS394—CSP
Austenitic stainless steel	-
SCM435	Ferroferric Oxide Protective Film	Spring Steel
	Electroless Nickel Plating	SUS394—CSP

Example of Use

Cantilever Pins Threaded with Retaining Ring Groove Widely used in various industries of automation

Equipment Name:
Tape tension adjustment mechanism
Design purpose:
A mechanism that keeps tension constant by utilizing the smooth lifting and lowering motion of a linear guide to absorb the speed difference between unwinding side and winding side.
Parts Application Description:
Cantilever pin is used in conjunction with timing pulley to adjust the tape tensioning force.

For detailed information, click

Example of Use.

Application Industries

Electronic & Electrical	Automotive	Lithium battery

Robotics	Smart Phones	Semiconductor

Related Documents

For anti-rust performance and maintenance of metal materials and surface treatment, refer to

Anti-Rust Performance
For applicable tightening torque for the bolts, refer to

Bolt Torque
For strength of bolt, refer to

Bolt Strength

: 30; 60; 90

Part Number
E-FXAA3-[2-30/1]-F[3-50/1]
E-FXAA3A-[2-30/1]-F[3-50/1]
E-FXAA4-[2-30/1]-F[3-50/1]
E-FXAA4A-[2-30/1]-F[3-50/1]
E-FXAA5-[2-30/1]-F[3-50/1]
E-FXAA5A-[2-30/1]-F[3-50/1]
E-FXAA6-[2-60/1]-F[5-100/1]
E-FXAA6A-[2-60/1]-F[5-100/1]
E-FXAA8-[2-60/1]-F[5-100/1]
E-FXAA8A-[2-60/1]-F[5-100/1]
E-FXAA10-[2-60/1]-F[5-100/1]
E-FXAA10A-[2-60/1]-F[5-100/1]
E-FXAA12-[2-60/1]-F[10-150/1]
E-FXAA15-[2-60/1]-F[10-150/1]
E-FXNAA3-[2-30/1]-F[3-50/1]-N[3-6/1]
E-FXNAA3A-[2-30/1]-F[3-50/1]-N[3-6/1]
E-FXNAA4-[2-30/1]-F[3-50/1]-N[4-8/1]
E-FXNAA4A-[2-30/1]-F[3-50/1]-N[4-8/1]
E-FXNAA5-[2-30/1]-F[3-50/1]-N[5-10/1]
E-FXNAA5A-[2-30/1]-F[3-50/1]-N[5-10/1]
E-FXNAA6-[2-60/1]-F[5-100/1]-N[6-12/1]
E-FXNAA6A-[2-60/1]-F[5-100/1]-N[6-12/1]
E-FXNAA8-[2-60/1]-F[5-100/1]-N[8-16/1]
E-FXNAA8A-[2-60/1]-F[5-100/1]-N[8-16/1]
E-FXNAA10-[2-60/1]-F[5-100/1]-N[10-20/1]
E-FXNAA10A-[2-60/1]-F[5-100/1]-N[10-20/1]
E-FXNAA12-[2-60/1]-F[10-150/1]-N[12-24/1]
E-FXNAA15-[2-60/1]-F[10-150/1]-N[12-24/1]
E-HFXAA6-[2-60/1]-F[5-100/1]
E-HFXAA6A-[2-60/1]-F[5-100/1]
E-HFXAA8-[2-60/1]-F[5-100/1]
E-HFXAA8A-[2-60/1]-F[5-100/1]
E-HFXAA10-[2-60/1]-F[5-100/1]
E-HFXAA10A-[2-60/1]-F[5-100/1]
E-PFXAA3-[2-30/1]-F[3-50/1]
E-PFXAA3A-[2-30/1]-F[3-50/1]
E-PFXAA4-[2-30/1]-F[3-50/1]
E-PFXAA4A-[2-30/1]-F[3-50/1]
E-PFXAA5-[2-30/1]-F[3-50/1]
E-PFXAA5A-[2-30/1]-F[3-50/1]
E-PFXAA6-[2-60/1]-F[5-100/1]
E-PFXAA6A-[2-60/1]-F[5-100/1]
E-PFXAA8-[2-60/1]-F[5-100/1]
E-PFXAA8A-[2-60/1]-F[5-100/1]
E-PFXAA10-[2-60/1]-F[5-100/1]
E-PFXAA10A-[2-60/1]-F[5-100/1]
E-PFXAA12-[2-60/1]-F[10-150/1]
E-PFXAA15-[2-60/1]-F[10-150/1]
E-PFXNAA3-[2-30/1]-F[3-50/1]-N[3-6/1]
E-PFXNAA3A-[2-30/1]-F[3-50/1]-N[3-6/1]
E-PFXNAA4-[2-30/1]-F[3-50/1]-N[4-8/1]
E-PFXNAA4A-[2-30/1]-F[3-50/1]-N[4-8/1]
E-PFXNAA5-[2-30/1]-F[3-50/1]-N[5-10/1]
E-PFXNAA5A-[2-30/1]-F[3-50/1]-N[5-10/1]
E-PFXNAA6-[2-60/1]-F[5-100/1]-N[6-12/1]
E-PFXNAA6A-[2-60/1]-F[5-100/1]-N[6-12/1]
E-PFXNAA8-[2-60/1]-F[5-100/1]-N[8-16/1]
E-PFXNAA8A-[2-60/1]-F[5-100/1]-N[8-16/1]
E-PFXNAA10-[2-60/1]-F[5-100/1]-N[10-20/1]
E-PFXNAA10A-[2-60/1]-F[5-100/1]-N[10-20/1]
E-PFXNAA12-[2-60/1]-F[10-150/1]-N[12-24/1]
E-PFXNAA15-[2-60/1]-F[10-150/1]-N[12-24/1]
E-SFXAA3-[2-30/1]-F[3-50/1]
E-SFXAA3A-[2-30/1]-F[3-50/1]
E-SFXAA4-[2-30/1]-F[3-50/1]
E-SFXAA4A-[2-30/1]-F[3-50/1]
E-SFXAA5-[2-30/1]-F[3-50/1]
E-SFXAA5A-[2-30/1]-F[3-50/1]
E-SFXAA6-[2-60/1]-F[5-100/1]
E-SFXAA6A-[2-60/1]-F[5-100/1]
E-SFXAA8-[2-60/1]-F[5-100/1]
E-SFXAA8A-[2-60/1]-F[5-100/1]
E-SFXAA10-[2-60/1]-F[5-100/1]
E-SFXAA10A-[2-60/1]-F[5-100/1]
E-SFXAA12-[2-60/1]-F[10-150/1]
E-SFXAA15-[2-60/1]-F[10-150/1]
E-SFXNAA3-[2-30/1]-F[3-50/1]-N[3-6/1]
E-SFXNAA3A-[2-30/1]-F[3-50/1]-N[3-6/1]
E-SFXNAA4-[2-30/1]-F[3-50/1]-N[4-8/1]
E-SFXNAA4A-[2-30/1]-F[3-50/1]-N[4-8/1]
E-SFXNAA5-[2-30/1]-F[3-50/1]-N[5-10/1]
E-SFXNAA5A-[2-30/1]-F[3-50/1]-N[5-10/1]
E-SFXNAA6-[2-60/1]-F[5-100/1]-N[6-12/1]
E-SFXNAA6A-[2-60/1]-F[5-100/1]-N[6-12/1]
E-SFXNAA8-[2-60/1]-F[5-100/1]-N[8-16/1]
E-SFXNAA8A-[2-60/1]-F[5-100/1]-N[8-16/1]
E-SFXNAA10-[2-60/1]-F[5-100/1]-N[10-20/1]
E-SFXNAA10A-[2-60/1]-F[5-100/1]-N[10-20/1]
E-SFXNAA12-[2-60/1]-F[10-150/1]-N[12-24/1]
E-SFXNAA15-[2-60/1]-F[10-150/1]-N[12-24/1]

Price	Minimum Order Qty.	Days to ShipSố ngày giao hàng	Shaft Diameter (mm) (mm)	Material	Surface Treatment	Hardness	Thread Length N (mm)	Material	Thread Length Ordering Code	M (Coarse)	H Dimension (mm)	Thread Length N (mm)	Shaft Shoulder Dimension	F (mm)	Y (mm)
-	1 Piece(s)	9 Day(s)	3	Steel	Black Oxide	Hardness Not Spec-designed	-	General structural steel or carbon steel	Thread Length Selectable	3	7	4.5	Standard	3 ～ 50	2 ～ 30
-	1 Piece(s)	9 Day(s)	3	Steel	Black Oxide	Hardness Not Spec-designed	-	General structural steel or carbon steel	Thread Length Selectable	3	11	4.5	Widened	3 ～ 50	2 ～ 30
-	1 Piece(s)	9 Day(s)	4	Steel	Black Oxide	Hardness Not Spec-designed	-	General structural steel or carbon steel	Thread Length Selectable	4	8	6	Standard	3 ～ 50	2 ～ 30
-	1 Piece(s)	9 Day(s)	4	Steel	Black Oxide	Hardness Not Spec-designed	-	General structural steel or carbon steel	Thread Length Selectable	4	12	6	Widened	3 ～ 50	2 ～ 30
-	1 Piece(s)	9 Day(s)	5	Steel	Black Oxide	Hardness Not Spec-designed	-	General structural steel or carbon steel	Thread Length Selectable	5	9	7.5	Standard	3 ～ 50	2 ～ 30
-	1 Piece(s)	9 Day(s)	5	Steel	Black Oxide	Hardness Not Spec-designed	-	General structural steel or carbon steel	Thread Length Selectable	5	13	7.5	Widened	3 ～ 50	2 ～ 30
-	1 Piece(s)	9 Day(s)	6	Steel	Black Oxide	Hardness Not Spec-designed	-	General structural steel or carbon steel	Thread Length Selectable	6	10	9	Standard	5 ～ 100	2 ～ 60
-	1 Piece(s)	9 Day(s)	6	Steel	Black Oxide	Hardness Not Spec-designed	-	General structural steel or carbon steel	Thread Length Selectable	6	14	9	Widened	5 ～ 100	2 ～ 60
-	1 Piece(s)	9 Day(s)	8	Steel	Black Oxide	Hardness Not Spec-designed	-	General structural steel or carbon steel	Thread Length Selectable	8	12	12	Standard	5 ～ 100	2 ～ 60
-	1 Piece(s)	9 Day(s)	8	Steel	Black Oxide	Hardness Not Spec-designed	-	General structural steel or carbon steel	Thread Length Selectable	8	16	12	Widened	5 ～ 100	2 ～ 60
-	1 Piece(s)	9 Day(s)	10	Steel	Black Oxide	Hardness Not Spec-designed	-	General structural steel or carbon steel	Thread Length Selectable	10	15	15	Standard	5 ～ 100	2 ～ 60
-	1 Piece(s)	9 Day(s)	10	Steel	Black Oxide	Hardness Not Spec-designed	-	General structural steel or carbon steel	Thread Length Selectable	10	20	15	Widened	5 ～ 100	2 ～ 60
-	1 Piece(s)	9 Day(s)	12	Steel	Black Oxide	Hardness Not Spec-designed	-	General structural steel or carbon steel	Thread Length Selectable	12	17	18	Standard	10 ～ 150	2 ～ 60
-	1 Piece(s)	9 Day(s)	15	Steel	Black Oxide	Hardness Not Spec-designed	-	General structural steel or carbon steel	Thread Length Selectable	12	20	18	Standard	10 ～ 150	2 ～ 60
-	1 Piece(s)	9 Day(s)	3	Steel	Black Oxide	Hardness Not Spec-designed	3 ～ 6	General structural steel or carbon steel	Thread Length Configurable	3	7	-	Standard	3 ～ 50	2 ～ 30
-	1 Piece(s)	9 Day(s)	3	Steel	Black Oxide	Hardness Not Spec-designed	3 ～ 6	General structural steel or carbon steel	Thread Length Configurable	3	11	-	Widened	3 ～ 50	2 ～ 30
-	1 Piece(s)	9 Day(s)	4	Steel	Black Oxide	Hardness Not Spec-designed	4 ～ 8	General structural steel or carbon steel	Thread Length Configurable	4	8	-	Standard	3 ～ 50	2 ～ 30
-	1 Piece(s)	9 Day(s)	4	Steel	Black Oxide	Hardness Not Spec-designed	4 ～ 8	General structural steel or carbon steel	Thread Length Configurable	4	12	-	Widened	3 ～ 50	2 ～ 30
-	1 Piece(s)	9 Day(s)	5	Steel	Black Oxide	Hardness Not Spec-designed	5 ～ 10	General structural steel or carbon steel	Thread Length Configurable	5	9	-	Standard	3 ～ 50	2 ～ 30
-	1 Piece(s)	9 Day(s)	5	Steel	Black Oxide	Hardness Not Spec-designed	5 ～ 10	General structural steel or carbon steel	Thread Length Configurable	5	13	-	Widened	3 ～ 50	2 ～ 30
-	1 Piece(s)	9 Day(s)	6	Steel	Black Oxide	Hardness Not Spec-designed	6 ～ 12	General structural steel or carbon steel	Thread Length Configurable	6	10	-	Standard	5 ～ 100	2 ～ 60
-	1 Piece(s)	9 Day(s)	6	Steel	Black Oxide	Hardness Not Spec-designed	6 ～ 12	General structural steel or carbon steel	Thread Length Configurable	6	14	-	Widened	5 ～ 100	2 ～ 60
-	1 Piece(s)	9 Day(s)	8	Steel	Black Oxide	Hardness Not Spec-designed	8 ～ 16	General structural steel or carbon steel	Thread Length Configurable	8	12	-	Standard	5 ～ 100	2 ～ 60
-	1 Piece(s)	9 Day(s)	8	Steel	Black Oxide	Hardness Not Spec-designed	8 ～ 16	General structural steel or carbon steel	Thread Length Configurable	8	16	-	Widened	5 ～ 100	2 ～ 60
-	1 Piece(s)	9 Day(s)	10	Steel	Black Oxide	Hardness Not Spec-designed	10 ～ 20	General structural steel or carbon steel	Thread Length Configurable	10	15	-	Standard	5 ～ 100	2 ～ 60
-	1 Piece(s)	9 Day(s)	10	Steel	Black Oxide	Hardness Not Spec-designed	10 ～ 20	General structural steel or carbon steel	Thread Length Configurable	10	20	-	Widened	5 ～ 100	2 ～ 60
-	1 Piece(s)	9 Day(s)	12	Steel	Black Oxide	Hardness Not Spec-designed	12 ～ 24	General structural steel or carbon steel	Thread Length Configurable	12	17	-	Standard	10 ～ 150	2 ～ 60
-	1 Piece(s)	9 Day(s)	15	Steel	Black Oxide	Hardness Not Spec-designed	12 ～ 24	General structural steel or carbon steel	Thread Length Configurable	12	20	-	Standard	10 ～ 150	2 ～ 60
-	1 Piece(s)	9 Day(s)	6	Steel	Black Oxide	Hardness Spec-designed	-	Tempered steel hardness HRC30～	Thread Length Selectable	6	10	9	Standard	5 ～ 100	2 ～ 60
-	1 Piece(s)	9 Day(s)	6	Steel	Black Oxide	Hardness Spec-designed	-	Tempered steel hardness HRC30～	Thread Length Selectable	6	14	9	Widened	5 ～ 100	2 ～ 60
-	1 Piece(s)	9 Day(s)	8	Steel	Black Oxide	Hardness Spec-designed	-	Tempered steel hardness HRC30～	Thread Length Selectable	8	12	12	Standard	5 ～ 100	2 ～ 60
-	1 Piece(s)	9 Day(s)	8	Steel	Black Oxide	Hardness Spec-designed	-	Tempered steel hardness HRC30～	Thread Length Selectable	8	16	12	Widened	5 ～ 100	2 ～ 60
-	1 Piece(s)	9 Day(s)	10	Steel	Black Oxide	Hardness Spec-designed	-	Tempered steel hardness HRC30～	Thread Length Selectable	10	15	15	Standard	5 ～ 100	2 ～ 60
-	1 Piece(s)	9 Day(s)	10	Steel	Black Oxide	Hardness Spec-designed	-	Tempered steel hardness HRC30～	Thread Length Selectable	10	20	15	Widened	5 ～ 100	2 ～ 60
-	1 Piece(s)	9 Day(s)	3	Steel	Electroless Nickel Plating	Hardness Not Spec-designed	-	General structural steel or carbon steel	Thread Length Selectable	3	7	4.5	Standard	3 ～ 50	2 ～ 30
-	1 Piece(s)	9 Day(s)	3	Steel	Electroless Nickel Plating	Hardness Not Spec-designed	-	General structural steel or carbon steel	Thread Length Selectable	3	11	4.5	Widened	3 ～ 50	2 ～ 30
-	1 Piece(s)	9 Day(s)	4	Steel	Electroless Nickel Plating	Hardness Not Spec-designed	-	General structural steel or carbon steel	Thread Length Selectable	4	8	6	Standard	3 ～ 50	2 ～ 30
-	1 Piece(s)	9 Day(s)	4	Steel	Electroless Nickel Plating	Hardness Not Spec-designed	-	General structural steel or carbon steel	Thread Length Selectable	4	12	6	Widened	3 ～ 50	2 ～ 30
-	1 Piece(s)	9 Day(s)	5	Steel	Electroless Nickel Plating	Hardness Not Spec-designed	-	General structural steel or carbon steel	Thread Length Selectable	5	9	7.5	Standard	3 ～ 50	2 ～ 30
-	1 Piece(s)	9 Day(s)	5	Steel	Electroless Nickel Plating	Hardness Not Spec-designed	-	General structural steel or carbon steel	Thread Length Selectable	5	13	7.5	Widened	3 ～ 50	2 ～ 30
-	1 Piece(s)	9 Day(s)	6	Steel	Electroless Nickel Plating	Hardness Not Spec-designed	-	General structural steel or carbon steel	Thread Length Selectable	6	10	9	Standard	5 ～ 100	2 ～ 60
-	1 Piece(s)	9 Day(s)	6	Steel	Electroless Nickel Plating	Hardness Not Spec-designed	-	General structural steel or carbon steel	Thread Length Selectable	6	14	9	Widened	5 ～ 100	2 ～ 60
-	1 Piece(s)	9 Day(s)	8	Steel	Electroless Nickel Plating	Hardness Not Spec-designed	-	General structural steel or carbon steel	Thread Length Selectable	8	12	12	Standard	5 ～ 100	2 ～ 60
-	1 Piece(s)	9 Day(s)	8	Steel	Electroless Nickel Plating	Hardness Not Spec-designed	-	General structural steel or carbon steel	Thread Length Selectable	8	16	12	Widened	5 ～ 100	2 ～ 60
-	1 Piece(s)	9 Day(s)	10	Steel	Electroless Nickel Plating	Hardness Not Spec-designed	-	General structural steel or carbon steel	Thread Length Selectable	10	15	15	Standard	5 ～ 100	2 ～ 60
-	1 Piece(s)	9 Day(s)	10	Steel	Electroless Nickel Plating	Hardness Not Spec-designed	-	General structural steel or carbon steel	Thread Length Selectable	10	20	15	Widened	5 ～ 100	2 ～ 60
-	1 Piece(s)	9 Day(s)	12	Steel	Electroless Nickel Plating	Hardness Not Spec-designed	-	General structural steel or carbon steel	Thread Length Selectable	12	17	18	Standard	10 ～ 150	2 ～ 60
-	1 Piece(s)	9 Day(s)	15	Steel	Electroless Nickel Plating	Hardness Not Spec-designed	-	General structural steel or carbon steel	Thread Length Selectable	12	20	18	Standard	10 ～ 150	2 ～ 60
-	1 Piece(s)	9 Day(s)	3	Steel	Electroless Nickel Plating	Hardness Not Spec-designed	3 ～ 6	General structural steel or carbon steel	Thread Length Configurable	3	7	-	Standard	3 ～ 50	2 ～ 30
-	1 Piece(s)	9 Day(s)	3	Steel	Electroless Nickel Plating	Hardness Not Spec-designed	3 ～ 6	General structural steel or carbon steel	Thread Length Configurable	3	11	-	Widened	3 ～ 50	2 ～ 30
-	1 Piece(s)	9 Day(s)	4	Steel	Electroless Nickel Plating	Hardness Not Spec-designed	4 ～ 8	General structural steel or carbon steel	Thread Length Configurable	4	8	-	Standard	3 ～ 50	2 ～ 30
-	1 Piece(s)	9 Day(s)	4	Steel	Electroless Nickel Plating	Hardness Not Spec-designed	4 ～ 8	General structural steel or carbon steel	Thread Length Configurable	4	12	-	Widened	3 ～ 50	2 ～ 30
-	1 Piece(s)	9 Day(s)	5	Steel	Electroless Nickel Plating	Hardness Not Spec-designed	5 ～ 10	General structural steel or carbon steel	Thread Length Configurable	5	9	-	Standard	3 ～ 50	2 ～ 30
-	1 Piece(s)	9 Day(s)	5	Steel	Electroless Nickel Plating	Hardness Not Spec-designed	5 ～ 10	General structural steel or carbon steel	Thread Length Configurable	5	13	-	Widened	3 ～ 50	2 ～ 30
-	1 Piece(s)	9 Day(s)	6	Steel	Electroless Nickel Plating	Hardness Not Spec-designed	6 ～ 12	General structural steel or carbon steel	Thread Length Configurable	6	10	-	Standard	5 ～ 100	2 ～ 60
-	1 Piece(s)	9 Day(s)	6	Steel	Electroless Nickel Plating	Hardness Not Spec-designed	6 ～ 12	General structural steel or carbon steel	Thread Length Configurable	6	14	-	Widened	5 ～ 100	2 ～ 60
-	1 Piece(s)	9 Day(s)	8	Steel	Electroless Nickel Plating	Hardness Not Spec-designed	8 ～ 16	General structural steel or carbon steel	Thread Length Configurable	8	12	-	Standard	5 ～ 100	2 ～ 60
-	1 Piece(s)	9 Day(s)	8	Steel	Electroless Nickel Plating	Hardness Not Spec-designed	8 ～ 16	General structural steel or carbon steel	Thread Length Configurable	8	16	-	Widened	5 ～ 100	2 ～ 60
-	1 Piece(s)	9 Day(s)	10	Steel	Electroless Nickel Plating	Hardness Not Spec-designed	10 ～ 20	General structural steel or carbon steel	Thread Length Configurable	10	15	-	Standard	5 ～ 100	2 ～ 60
-	1 Piece(s)	9 Day(s)	10	Steel	Electroless Nickel Plating	Hardness Not Spec-designed	10 ～ 20	General structural steel or carbon steel	Thread Length Configurable	10	20	-	Widened	5 ～ 100	2 ～ 60
-	1 Piece(s)	9 Day(s)	12	Steel	Electroless Nickel Plating	Hardness Not Spec-designed	12 ～ 24	General structural steel or carbon steel	Thread Length Configurable	12	17	-	Standard	10 ～ 150	2 ～ 60
-	1 Piece(s)	9 Day(s)	15	Steel	Electroless Nickel Plating	Hardness Not Spec-designed	12 ～ 24	General structural steel or carbon steel	Thread Length Configurable	12	20	-	Standard	10 ～ 150	2 ～ 60
-	1 Piece(s)	9 Day(s)	3	Stainless Steel	Not Provided	Hardness Not Spec-designed	-	Austenitic stainless steel	Thread Length Selectable	3	7	4.5	Standard	3 ～ 50	2 ～ 30
-	1 Piece(s)	9 Day(s)	3	Stainless Steel	Not Provided	Hardness Not Spec-designed	-	Austenitic stainless steel	Thread Length Selectable	3	11	4.5	Widened	3 ～ 50	2 ～ 30
-	1 Piece(s)	9 Day(s)	4	Stainless Steel	Not Provided	Hardness Not Spec-designed	-	Austenitic stainless steel	Thread Length Selectable	4	8	6	Standard	3 ～ 50	2 ～ 30
-	1 Piece(s)	9 Day(s)	4	Stainless Steel	Not Provided	Hardness Not Spec-designed	-	Austenitic stainless steel	Thread Length Selectable	4	12	6	Widened	3 ～ 50	2 ～ 30
-	1 Piece(s)	9 Day(s)	5	Stainless Steel	Not Provided	Hardness Not Spec-designed	-	Austenitic stainless steel	Thread Length Selectable	5	9	7.5	Standard	3 ～ 50	2 ～ 30
-	1 Piece(s)	9 Day(s)	5	Stainless Steel	Not Provided	Hardness Not Spec-designed	-	Austenitic stainless steel	Thread Length Selectable	5	13	7.5	Widened	3 ～ 50	2 ～ 30
-	1 Piece(s)	9 Day(s)	6	Stainless Steel	Not Provided	Hardness Not Spec-designed	-	Austenitic stainless steel	Thread Length Selectable	6	10	9	Standard	5 ～ 100	2 ～ 60
-	1 Piece(s)	9 Day(s)	6	Stainless Steel	Not Provided	Hardness Not Spec-designed	-	Austenitic stainless steel	Thread Length Selectable	6	14	9	Widened	5 ～ 100	2 ～ 60
-	1 Piece(s)	9 Day(s)	8	Stainless Steel	Not Provided	Hardness Not Spec-designed	-	Austenitic stainless steel	Thread Length Selectable	8	12	12	Standard	5 ～ 100	2 ～ 60
-	1 Piece(s)	9 Day(s)	8	Stainless Steel	Not Provided	Hardness Not Spec-designed	-	Austenitic stainless steel	Thread Length Selectable	8	16	12	Widened	5 ～ 100	2 ～ 60
-	1 Piece(s)	9 Day(s)	10	Stainless Steel	Not Provided	Hardness Not Spec-designed	-	Austenitic stainless steel	Thread Length Selectable	10	15	15	Standard	5 ～ 100	2 ～ 60
-	1 Piece(s)	9 Day(s)	10	Stainless Steel	Not Provided	Hardness Not Spec-designed	-	Austenitic stainless steel	Thread Length Selectable	10	20	15	Widened	5 ～ 100	2 ～ 60
-	1 Piece(s)	9 Day(s)	12	Stainless Steel	Not Provided	Hardness Not Spec-designed	-	Austenitic stainless steel	Thread Length Selectable	12	17	18	Standard	10 ～ 150	2 ～ 60
-	1 Piece(s)	9 Day(s)	15	Stainless Steel	Not Provided	Hardness Not Spec-designed	-	Austenitic stainless steel	Thread Length Selectable	12	20	18	Standard	10 ～ 150	2 ～ 60
-	1 Piece(s)	9 Day(s)	3	Stainless Steel	Not Provided	Hardness Not Spec-designed	3 ～ 6	Austenitic stainless steel	Thread Length Configurable	3	7	-	Standard	3 ～ 50	2 ～ 30
-	1 Piece(s)	9 Day(s)	3	Stainless Steel	Not Provided	Hardness Not Spec-designed	3 ～ 6	Austenitic stainless steel	Thread Length Configurable	3	11	-	Widened	3 ～ 50	2 ～ 30
-	1 Piece(s)	9 Day(s)	4	Stainless Steel	Not Provided	Hardness Not Spec-designed	4 ～ 8	Austenitic stainless steel	Thread Length Configurable	4	8	-	Standard	3 ～ 50	2 ～ 30
-	1 Piece(s)	9 Day(s)	4	Stainless Steel	Not Provided	Hardness Not Spec-designed	4 ～ 8	Austenitic stainless steel	Thread Length Configurable	4	12	-	Widened	3 ～ 50	2 ～ 30
-	1 Piece(s)	9 Day(s)	5	Stainless Steel	Not Provided	Hardness Not Spec-designed	5 ～ 10	Austenitic stainless steel	Thread Length Configurable	5	9	-	Standard	3 ～ 50	2 ～ 30
-	1 Piece(s)	9 Day(s)	5	Stainless Steel	Not Provided	Hardness Not Spec-designed	5 ～ 10	Austenitic stainless steel	Thread Length Configurable	5	13	-	Widened	3 ～ 50	2 ～ 30
-	1 Piece(s)	9 Day(s)	6	Stainless Steel	Not Provided	Hardness Not Spec-designed	6 ～ 12	Austenitic stainless steel	Thread Length Configurable	6	10	-	Standard	5 ～ 100	2 ～ 60
-	1 Piece(s)	9 Day(s)	6	Stainless Steel	Not Provided	Hardness Not Spec-designed	6 ～ 12	Austenitic stainless steel	Thread Length Configurable	6	14	-	Widened	5 ～ 100	2 ～ 60
-	1 Piece(s)	9 Day(s)	8	Stainless Steel	Not Provided	Hardness Not Spec-designed	8 ～ 16	Austenitic stainless steel	Thread Length Configurable	8	12	-	Standard	5 ～ 100	2 ～ 60
-	1 Piece(s)	9 Day(s)	8	Stainless Steel	Not Provided	Hardness Not Spec-designed	8 ～ 16	Austenitic stainless steel	Thread Length Configurable	8	16	-	Widened	5 ～ 100	2 ～ 60
-	1 Piece(s)	9 Day(s)	10	Stainless Steel	Not Provided	Hardness Not Spec-designed	10 ～ 20	Austenitic stainless steel	Thread Length Configurable	10	15	-	Standard	5 ～ 100	2 ～ 60
-	1 Piece(s)	9 Day(s)	10	Stainless Steel	Not Provided	Hardness Not Spec-designed	10 ～ 20	Austenitic stainless steel	Thread Length Configurable	10	20	-	Widened	5 ～ 100	2 ～ 60
-	1 Piece(s)	9 Day(s)	12	Stainless Steel	Not Provided	Hardness Not Spec-designed	12 ～ 24	Austenitic stainless steel	Thread Length Configurable	12	17	-	Standard	10 ～ 150	2 ～ 60
-	1 Piece(s)	9 Day(s)	15	Stainless Steel	Not Provided	Hardness Not Spec-designed	12 ～ 24	Austenitic stainless steel	Thread Length Configurable	12	20	-	Standard	10 ～ 150	2 ～ 60

Loading...Tải…

Basic InformationThông tin cơ bản

Shaft Retaining Method	Threaded (Lock Nut)	Retainer Shape	Wrench Flats	Bearing Retaining Method	With Retaining Ring Grooves

The specifications and dimensions of some parts may not be fully covered. For exact details, refer toCác thông số kỹ thuật và kích thước của mã sản phẩm có thể không được bao phủ đầy đủ. Để biết chi tiết chính xác, hãy tham khảo manufacturer catalogsdanh mục nhà sản xuất ..

Top of the page

About MISUMIVề Misumi

About this WebsiteVề trang Web này

Useful ToolsCác công cụ hữu ích

Customer ServiceDịch vụ chăm sóc khách hàng

MISUMI Contact Monday to Saturday: 8:00 am - 5:00 pm Order cut off time is 5:00 pm Thứ 2 đến Thứ 7: 8 giờ sáng đến 5 giờ chiều Hạn chót đặt hàng là 5 giờ chiều

Tel:Số điện thoại:0222-361-1555
Fax:Số Fax:0222-361-2555
InquiryYêu cầu

MISUMI APP

Install MISUMI APP

MISUMI Vietnam Company Limited, Legal Representative: Tomohiro Watanabe,
phone: 0222-361-1555, e-mail: [email protected], Enterprise Code: 0107514576,
Date of Issuance: 22 July 2016, Place of Issuance: Bac Ninh, Business Certificate No. 6573041568-KD dated 27 September 2016 issued by the People's Committee of Bac Ninh

Công ty TNHH MISUMI Việt Nam, Đại diện theo pháp luật: Tomohiro Watanabe,
Điện thoại: 0222-361-1555, e-mail: [email protected], Mã số doanh nghiệp: 0107514576,
ngày cấp 22/7/2016, nơi cấp: Bắc Ninh, Giấy phép kinh doanh số: 6573041568-KD ngày cấp 27/9/2016 bởi UBND tỉnh Bắc Ninh

Idlers Belt Backside Tensioning Type	Timing Pulleys T10	Economy series Toothed Timing Belts

Representative model: AFBD9-20	Representative model: TTPA22T10150-A-P24	Representative model: C-HTBN400S2M-40
Advantages: stable quality, short delivery time, multiple specifications.	Advantages: industry standard, short delivery time, multiple types.	Advantages: rich variety of specifications, high cost performance.

Search by Category / Brand Tìm theo danh mục, nhãn hiệu

Search by Category Tìm theo danh mục

How can we improve?

ConfigureTạo

Specification/DimensionsĐặc điểm kỹ thuật / Kích thướcĐặc điểm kỹ thuật / Kích thước

Shaft Diameter (mm)(mm)

Material

Surface Treatment

Hardness

Thread Length N(mm)

Material

Thread Length Ordering Code

M (Coarse)

H Dimension(mm)

Thread Length N(mm)

Shaft Shoulder Dimension

F(mm)

Y(mm)

type

Days to ShipSố ngày giao hàng

Specify AlterationsChỉ định thay đổi

Cantilever Shafts Standard, Retaining Ring Groove (Part Number)

Copy Part Number URL to Clipboard

Basic InformationThông tin cơ bản

About MISUMIVề Misumi

About this WebsiteVề trang Web này

Useful ToolsCác công cụ hữu ích

Customer ServiceDịch vụ chăm sóc khách hàng

MISUMI Contact Monday to Saturday: 8:00 am - 5:00 pm Order cut off time is 5:00 pm Thứ 2 đến Thứ 7: 8 giờ sáng đến 5 giờ chiều Hạn chót đặt hàng là 5 giờ chiều