(!) Since support from Microsoft will end on January 14th, 2020, Windows 7 will be excluded from the recommended environment from December 15th, 2019 on this site. Vì lý do Microsoft kết thúc hỗ trợ cho Windows 7 vào ngày 14/01/2020, Windows 7 sẽ là hệ điều hành không được khuyến khích sử dụng với trang web này từ ngày 15/12/2019.
Tel: 0222-361-1555
Email: [email protected]
8:00 - 17:00 (Mon - Sat)
Search by Category / Brand Tìm theo danh mục, nhãn hiệu
Search by Category Tìm theo danh mục
- [Thông báo] Cập nhật địa chỉ kho tập kết hàng hóa tại khu vực miền Nam của MISUMI Việt Nam. Xem chi tiết.
[Announcement] Update on warehouse address in the Southern region of MISUIMI Vietnam. See more. - [Cảnh Báo] Thủ Đoạn Lừa Đảo Từ Nhân Viên Giao Hàng – Yêu Cầu Trả Phí Ship. Xem chi tiết.
[Warning] Fraud Calling from Shipper - Asking to Pay Shipping Fee. See more.
Sprockets（Sprocket Shape：Shape B）
Brand |
|
|---|---|
Filter By |
|
| CAD |
|
| Days to Ship |
|
149 itemsMặt hàng
- Sort By
-
Recommended
You can add up to 6 items per a category to the compare list.
MiSUMi EconomyMiSUMi EconomyMISUMI
This is an economy item, The price is cheaper than the MISUMI standard product.
- Volume Discount
Sprocket Shape Nominal Number Number of Teeth(T) Shaft Bore Dia. d(mm) Number of Strands Material Chain Type Type Shaft Type Surface Treatment Roller Type Shape B 8 10 ～ 25 10 ～ 38 1 Steel RS Pilot Hole Type / Shaft Bore Machined Type Standard Pilot Bore / Shaft Bore Machining Configurable Not Provided -
From: 146,512 VND Days to Ship: Số ngày giao hàng: Same day or more 
Same day or more
-
Recommended
You can add up to 6 items per a category to the compare list.
MiSUMi EconomyMiSUMi EconomyMISUMI
This is an economy item, The price is cheaper than the MISUMI standard product.
- Volume Discount
Sprocket Shape Nominal Number Number of Teeth(T) Shaft Bore Dia. d(mm) Number of Strands Material Chain Type Type Shaft Type Surface Treatment Roller Type Shape B 40 9 ～ 15 9 ～ 25 1 Steel RS Pilot Hole Type / Shaft Bore Machined Type Standard Pilot Bore / Shaft Bore Machining Configurable Not Provided -
From: 127,198 VND Days to Ship: Số ngày giao hàng: Same day or more
Same day or more
-
You can add up to 6 items per a category to the compare list.
MISUMI
Sprockets are essential components in power transmission, especially chain drive systems. They offer a wide variety of sizes to choose from.[Feature]● Number of Teeth Minimum/Maximum : 9 and 40● Shaft Bore Spec. : Pilot Bore and New JIS Key slot + Tap● Shaft Bore Diameter Minimum/Maximum (mm.) : 10K and 40● Material :SP40B and BSP40B are S45C Equivalent (Spurs are Induction Hardened)SSP40B - SUS304 Equivalent● Surface treatment : Black Oxide only BSP40B[Application]Sprockets are commonly used in industrial machinery, such as chain conveyors.
- Volume Discount
Sprocket Shape Nominal Number Number of Teeth(T) Shaft Bore Dia. d(mm) Number of Strands Material Chain Type Type Shaft Type Surface Treatment Roller Type Shape B 40 9 ～ 40 10K ～ 40 1 Steel / Stainless Steel RS Pilot Hole Type / Shaft Bore Machined Type Standard Pilot Bore / Shaft Bore Machining Configurable Not Provided / Black Oxide - Days to Ship: Số ngày giao hàng: Same day or more
Same day or more
-
You can add up to 6 items per a category to the compare list.
MISUMI
Sprockets are essential components in power transmission, especially chain drive systems. They offer a wide variety of sizes to choose from.[Feature]● Number of Teeth Minimum/Maximum : 9 and 35● Shaft Bore Spec. : Pilot Bore and New JIS Key slot + Tap● Shaft Bore Diameter Minimum/Maximum (mm.) : 15 and 25● Material :SP50B and BSP50B are S45C Equivalent (Spurs are Induction Hardened)SSP50B - SUS304 Equivalent● Surface treatment : Black Oxide only BSP50B[Application]Sprockets are commonly used in industrial machinery, such as chain conveyors.
- Volume Discount
Sprocket Shape Nominal Number Number of Teeth(T) Shaft Bore Dia. d(mm) Number of Strands Material Chain Type Type Shaft Type Surface Treatment Roller Type Shape B 50 9 ～ 35 15 ～ 45 1 Steel / Stainless Steel RS Pilot Hole Type / Shaft Bore Machined Type Standard Pilot Bore / Shaft Bore Machining Configurable Not Provided / Black Oxide - Days to Ship: Số ngày giao hàng: 4 Day(s) or more
4 Day(s) or more
-
You can add up to 6 items per a category to the compare list.
MISUMI
In addition to the shaft hole machined type, we also offer shaft hole rough machined products (S specification) that allow for free additional machining.
- Volume Discount
Sprocket Shape Nominal Number Number of Teeth(T) Shaft Bore Dia. d(mm) Number of Strands Material Chain Type Type Shaft Type Surface Treatment Roller Type Shape B 60 9 ～ 30 19 ～ 50 1 Steel / Stainless Steel RS Pilot Hole Type / Shaft Bore Machined Type Standard Pilot Bore / Shaft Bore Machining Configurable Not Provided / Black Oxide - Days to Ship: Số ngày giao hàng: 4 Day(s) or more
4 Day(s) or more
-
You can add up to 6 items per a category to the compare list.
MISUMI
Sprockets are essential components in power transmission, especially chain drive systems. They offer a wide variety of sizes to choose from.[Feature]● Number of Teeth Minimum/Maximum : 9 and 40● Shaft Bore Spec. : Pilot Bore and New JIS Key slot + Tap● Shaft Bore Diameter Minimum/Maximum (mm.) : 10 and 30● Material :SP35B and BSP35B are S45C Equivalent (Spurs are Induction Hardened)SSP35B - SUS304 Equivalent● Surface treatment : Black Oxide only BSP35B[Application]Sprockets are commonly used in industrial machinery, such as chain conveyors.
- Volume Discount
Sprocket Shape Nominal Number Number of Teeth(T) Shaft Bore Dia. d(mm) Number of Strands Material Chain Type Type Shaft Type Surface Treatment Roller Type Shape B 35 9 ～ 40 10 ～ 30 1 Steel / Stainless Steel RS Pilot Hole Type / Shaft Bore Machined Type Standard Pilot Bore / Shaft Bore Machining Configurable Not Provided / Black Oxide - Days to Ship: Số ngày giao hàng: Same day or more
Same day or more
-
You can add up to 6 items per a category to the compare list.
MISUMI
Sprockets are essential components in power transmission, especially chain drive systems. They offer a wide variety of sizes to choose from.[Feature]● Number of Teeth Minimum/Maximum : 16 and 40● Shaft Bore Diameter Minimum/Maximum (mm.) : 10 and 20● Shaft Bore Spec. : Pilot Bore and New JIS Key slot + Threaded Hole Type● Material : S45C Equivalent and SUS304 Equivalent[Application]Sprockets are commonly used in industrial machinery, such as chain conveyors.
- Volume Discount
Sprocket Shape Nominal Number Number of Teeth(T) Shaft Bore Dia. d(mm) Number of Strands Material Chain Type Type Shaft Type Surface Treatment Roller Type Shape B 25 16 ～ 40 10 ～ 20 1 Steel / Stainless Steel RS Pilot Hole Type / Shaft Bore Machined Type Standard Pilot Bore / Shaft Bore Machining Configurable Not Provided - Days to Ship: Số ngày giao hàng: Same day or more
Same day or more
-
Economy series
You can add up to 6 items per a category to the compare list.
MiSUMi EconomyMiSUMi EconomyMISUMI
This is an economy item, The price is cheaper than the MISUMI standard product.
- Volume Discount
Sprocket Shape Nominal Number Number of Teeth(T) Shaft Bore Dia. d(mm) Number of Strands Material Chain Type Type Shaft Type Surface Treatment Roller Type Shape B 50 12 15 1 Steel RS Shaft Bore Machined Type Shaft Bore Machining Configurable Not Provided - From: 289,744 VND Days to Ship: Số ngày giao hàng: 1 Day(s)
1 Day(s)
-
Economy series
You can add up to 6 items per a category to the compare list.
MiSUMi EconomyMiSUMi EconomyMISUMI
This is an economy item, The price is cheaper than the MISUMI standard product.
- Volume Discount
Sprocket Shape Nominal Number Number of Teeth(T) Shaft Bore Dia. d(mm) Number of Strands Material Chain Type Type Shaft Type Surface Treatment Roller Type Shape B 35 9 ～ 18 8 ～ 20 1 Steel RS Pilot Hole Type / Shaft Bore Machined Type Standard Pilot Bore / Shaft Bore Machining Configurable Not Provided - From: 164,350 VND Days to Ship: Số ngày giao hàng: Same day or more
Same day or more
-
You can add up to 6 items per a category to the compare list.
KATAYAMA CHAIN
Shaft hole H7 tolerance, new JIS standard parallel key grade, metric coarse threaded sprocket for finished shaft hole.[Features]・ Carbon steel for mechanical structures・ Induction hardened tooth tip・ For standard chain 40・ New JIS keyway specifications[Applications]・ Motor, motor power transmission, wheel drive, conveyor, elevator, forklift lift
Sprocket Shape Nominal Number Number of Teeth(T) Shaft Bore Dia. d(mm) Number of Strands Material Chain Type Type Shaft Type Surface Treatment Roller Type Shape B 40 9 ～ 50 10 ～ 45 1 Steel RS Shaft Bore Machined Type Shaft Bore Machining Configurable Not Provided - From: 221,241 VND Days to Ship: Số ngày giao hàng: Same day or more
Same day or more
-
You can add up to 6 items per a category to the compare list.
Standard Sprocket 100B/C Type, Semi-F Series, Shaft Hole Machining Completed (New JIS Key)
KATAYAMA CHAIN
The semi-F series is a system for simple set up and rapid delivery of completed products with the desired machining (internal diameter, keyway, tap) of products with pilot holes completed.
Sprocket Shape Nominal Number Number of Teeth(T) Shaft Bore Dia. d(mm) Number of Strands Material Chain Type Type Shaft Type Surface Treatment Roller Type Shape B 100 9 ～ 65 21 ～ 103 1 Steel RS Shaft Bore Machined Type Shaft Bore Machining Configurable - - From: 1,173,091 VND Days to Ship: Số ngày giao hàng: 6 Day(s) or more
6 Day(s) or more
-
Economy series
You can add up to 6 items per a category to the compare list.
MiSUMi EconomyMiSUMi EconomyMISUMI
This is an economy item, The price is cheaper than the MISUMI standard product.
- Volume Discount
Sprocket Shape Nominal Number Number of Teeth(T) Shaft Bore Dia. d(mm) Number of Strands Material Chain Type Type Shaft Type Surface Treatment Roller Type Shape B 6 10 ～ 25 8 ～ 25 1 Steel RS Pilot Hole Type / Shaft Bore Machined Type Standard Pilot Bore / Shaft Bore Machining Configurable Not Provided - From: 92,240 VND Days to Ship: Số ngày giao hàng: Same day or more
Same day or more
-
Economy series
You can add up to 6 items per a category to the compare list.
MiSUMi EconomyMiSUMi EconomyMISUMI
This is an economy item, The price is cheaper than the MISUMI standard product.
- Volume Discount
Sprocket Shape Nominal Number Number of Teeth(T) Shaft Bore Dia. d(mm) Number of Strands Material Chain Type Type Shaft Type Surface Treatment Roller Type Shape B 60 14 ～ 15 20 1 Steel RS Shaft Bore Machined Type Shaft Bore Machining Configurable Not Provided - From: 545,941 VND Days to Ship: Số ngày giao hàng: 5 Day(s) or more
5 Day(s) or more
-
Economy series
You can add up to 6 items per a category to the compare list.
MiSUMi EconomyMiSUMi EconomyMISUMI
This is an economy item, The price is cheaper than the MISUMI standard product.
- Volume Discount
Sprocket Shape Nominal Number Number of Teeth(T) Shaft Bore Dia. d(mm) Number of Strands Material Chain Type Type Shaft Type Surface Treatment Roller Type Shape B 25 16 ～ 32 9 ～ 15 1 Steel RS Pilot Hole Type / Shaft Bore Machined Type Standard Pilot Bore / Shaft Bore Machining Configurable Not Provided - From: 117,831 VND Days to Ship: Số ngày giao hàng: Same day or more
Same day or more
-
You can add up to 6 items per a category to the compare list.
MISUMI
Sprockets are essential components in power transmission, especially chain drive systems. They offer a wide variety of sizes to choose from.[Feature]● Number of Teeth Minimum/Maximum : 9 and 21● Shaft Bore Spec. : Pilot Bore and New JIS Key slot + Tap● Shaft Bore Diameter Minimum/Maximum (mm.) : 25 and 50● Material : S45C Equivalent (Spurs are Induction Hardened)[Application]Sprockets are commonly used in industrial machinery, such as chain conveyors.
- Volume Discount
Sprocket Shape Nominal Number Number of Teeth(T) Shaft Bore Dia. d(mm) Number of Strands Material Chain Type Type Shaft Type Surface Treatment Roller Type Shape B 80 9 ～ 21 25 ～ 50 1 Steel RS Pilot Hole Type / Shaft Bore Machined Type Standard Pilot Bore / Shaft Bore Machining Configurable Not Provided - Days to Ship: Số ngày giao hàng: 4 Day(s) or more
4 Day(s) or more
-
Economy series
You can add up to 6 items per a category to the compare list.
MiSUMi EconomyMiSUMi EconomyMISUMI
This is an economy item, The price is cheaper than the MISUMI standard product.
- Volume Discount
Sprocket Shape Nominal Number Number of Teeth(T) Shaft Bore Dia. d(mm) Number of Strands Material Chain Type Type Shaft Type Surface Treatment Roller Type Shape B 80 12 15 ～ 40 1 Steel RS Pilot Hole Type / Shaft Bore Machined Type Standard Pilot Bore / Shaft Bore Machining Configurable Not Provided - From: 392,353 VND Days to Ship: Số ngày giao hàng: Same day or more
Same day or more
-
You can add up to 6 items per a category to the compare list.
SANKOSEISAKUSHO
This is a 2-row B-type sprocket. [Materials]·Carbon steel for machine structures/SS400
Sprocket Shape Nominal Number Number of Teeth(T) Shaft Bore Dia. d(mm) Number of Strands Material Chain Type Type Shaft Type Surface Treatment Roller Type Shape B 35 ～ 120 10 ～ 60 9 ～ 33 2 Steel Others Pilot Hole Type Standard Pilot Bore Not Provided - From: 261,633 VND Days to Ship: Số ngày giao hàng: 6 Day(s) or more
6 Day(s) or more
-
You can add up to 6 items per a category to the compare list.
MISUMI
In addition to the shaft hole machined type, we also offer shaft hole rough machined products (S specification) that allow for free additional machining.
- Volume Discount
Sprocket Shape Nominal Number Number of Teeth(T) Shaft Bore Dia. d(mm) Number of Strands Material Chain Type Type Shaft Type Surface Treatment Roller Type Shape B 15 11 ～ 35 5 ～ 16 1 Steel RS Pilot Hole Type / Shaft Bore Machined Type Standard Pilot Bore / Shaft Bore Machining Configurable Not Provided - Days to Ship: Số ngày giao hàng: 4 Day(s) or more
4 Day(s) or more
-
You can add up to 6 items per a category to the compare list.
KATAYAMA CHAIN
FBN finished sprocket has shaft hole tolerance H7, standard grade parallel keys that satisfy JIS standards, metric coarse machining, and hex socket head screws already inserted.
Sprocket Shape Nominal Number Number of Teeth(T) Shaft Bore Dia. d(mm) Number of Strands Material Chain Type Type Shaft Type Surface Treatment Roller Type Shape B 50 9 ～ 50 14 ～ 50 1 Steel RS Shaft Bore Machined Type Shaft Bore Machining Configurable Not Provided - From: 270,541 VND Days to Ship: Số ngày giao hàng: 6 Day(s) or more
6 Day(s) or more
-
Economy series
You can add up to 6 items per a category to the compare list.
MiSUMi EconomyMiSUMi EconomyMISUMI
This is an economy item, The price is cheaper than the MISUMI standard product.
- Volume Discount
Sprocket Shape Nominal Number Number of Teeth(T) Shaft Bore Dia. d(mm) Number of Strands Material Chain Type Type Shaft Type Surface Treatment Roller Type Shape B 10 10 ～ 25 10 ～ 40 1 Steel RS Pilot Hole Type / Shaft Bore Machined Type Standard Pilot Bore / Shaft Bore Machining Configurable Not Provided - From: 143,550 VND Days to Ship: Số ngày giao hàng: Same day or more
Same day or more
-
You can add up to 6 items per a category to the compare list.
KATAYAMA CHAIN
[Features]・ Standard sprocket made by induction hardening carbon steel・ It is selectable from a wide range of number of teeth and shaft hole diameter
Sprocket Shape Nominal Number Number of Teeth(T) Shaft Bore Dia. d(mm) Number of Strands Material Chain Type Type Shaft Type Surface Treatment Roller Type Shape B 40 8 ～ 90 9 ～ 20 1 Steel RS Pilot Hole Type Standard Pilot Bore - - From: 113,356 VND Days to Ship: Số ngày giao hàng: 6 Day(s) or more
6 Day(s) or more
-
Economy series
You can add up to 6 items per a category to the compare list.
MiSUMi EconomyMiSUMi EconomyMISUMI
RoHS Compliant Product
- Volume Discount
Sprocket Shape Nominal Number Number of Teeth(T) Shaft Bore Dia. d(mm) Number of Strands Material Chain Type Type Shaft Type Surface Treatment Roller Type Shape B 16 11 ～ 25 16 ～ 50 1 Steel - Pilot Hole Type / Shaft Bore Machined Type Standard Pilot Bore / Shaft Bore Machining Configurable Not Provided - From: 262,259 VND Days to Ship: Số ngày giao hàng: Same day or more
Same day or more
-
You can add up to 6 items per a category to the compare list.
KATAYAMA CHAIN
[Features]·Compatible Chain: No. 50. ·Sprocket Shape: B type.
Sprocket Shape Nominal Number Number of Teeth(T) Shaft Bore Dia. d(mm) Number of Strands Material Chain Type Type Shaft Type Surface Treatment Roller Type Shape B 50 8 ～ 90 10 ～ 20 1 Steel RS Pilot Hole Type Standard Pilot Bore - - From: 142,740 VND Days to Ship: Số ngày giao hàng: 6 Day(s) or more
6 Day(s) or more
-
You can add up to 6 items per a category to the compare list.
Standard Sprocket, New B Type (Single Integrated Hub)
SANKOSEISAKUSHO
Featuring induction-hardened tooth tips suitable for high speed rotation, this single-hub type is most commonly used for driving. Made from carbon steel for machine structural use.
Sprocket Shape Nominal Number Number of Teeth(T) Shaft Bore Dia. d(mm) Number of Strands Material Chain Type Type Shaft Type Surface Treatment Roller Type Shape B 25 ～ 160 9 ～ 75 6 ～ 38 1 Steel Others Pilot Hole Type Standard Pilot Bore Not Provided / Tooth Surface Hardening - From: 140,516 VND Days to Ship: Số ngày giao hàng: 6 Day(s) or more
6 Day(s) or more
-
Economy series
You can add up to 6 items per a category to the compare list.
MiSUMi EconomyMiSUMi EconomyMISUMI
RoHS Compliant Product
- Volume Discount
Sprocket Shape Nominal Number Number of Teeth(T) Shaft Bore Dia. d(mm) Number of Strands Material Chain Type Type Shaft Type Surface Treatment Roller Type Shape B 20 10 ～ 20 20 ～ 50 1 Steel - Pilot Hole Type / Shaft Bore Machined Type Standard Pilot Bore / Shaft Bore Machining Configurable Not Provided - From: 383,368 VND Days to Ship: Số ngày giao hàng: Same day or more
Same day or more
-
You can add up to 6 items per a category to the compare list.
MS Sprocket With Shaft Bore Processing, New B Type
SANKOSEISAKUSHO
New B type, MS sprocket with shaft hole machining. [Materials]·Carbon steel for machine structures.
Sprocket Shape Nominal Number Number of Teeth(T) Shaft Bore Dia. d(mm) Number of Strands Material Chain Type Type Shaft Type Surface Treatment Roller Type Shape B 35 ～ 100 9 ～ 60 10 ～ 60 1 Steel Others Shaft Bore Machined Type Shaft Bore Machining Configurable Not Provided - From: 265,618 VND Days to Ship: Số ngày giao hàng: 6 Day(s) or more
6 Day(s) or more
-
You can add up to 6 items per a category to the compare list.
Standard Sprocket Model, Type 25B, Semi-F Series, Shaft Hole Machining Completed (New JIS Key)
KATAYAMA CHAIN
The semi-F series is a system for simple set up and rapid delivery of completed products with the desired machining (internal diameter, keyway, tap) of products with pilot holes completed.
Sprocket Shape Nominal Number Number of Teeth(T) Shaft Bore Dia. d(mm) Number of Strands Material Chain Type Type Shaft Type Surface Treatment Roller Type Shape B 25 10 ～ 80 7 ～ 30 1 Steel RS Shaft Bore Machined Type Shaft Bore Machining Configurable Not Provided - From: 499,736 VND Days to Ship: Số ngày giao hàng: 6 Day(s) or more
6 Day(s) or more
-
You can add up to 6 items per a category to the compare list.
Standard Sprocket Model, Type 35B, Semi-F Series, Shaft Hole Machining Completed (New JIS Key)
KATAYAMA CHAIN
The semi-F series is a system for simple set up and rapid delivery of completed products with the desired machining (internal diameter, keyway, tap) of products with pilot holes completed.
Sprocket Shape Nominal Number Number of Teeth(T) Shaft Bore Dia. d(mm) Number of Strands Material Chain Type Type Shaft Type Surface Treatment Roller Type Shape B 35 8 ～ 80 9 ～ 45 1 Steel RS Shaft Bore Machined Type Shaft Bore Machining Configurable - - From: 438,278 VND Days to Ship: Số ngày giao hàng: 6 Day(s) or more
6 Day(s) or more
-
You can add up to 6 items per a category to the compare list.
Standard Sprocket, NK100-2B Form, Semi F Series, Shaft Holes Already Established (New JIS Key)
KATAYAMA CHAIN
The semi-F series is a system for simple set up and rapid delivery of completed products with the desired machining (internal diameter, keyway, tap) of products with pilot holes completed.
Sprocket Shape Nominal Number Number of Teeth(T) Shaft Bore Dia. d(mm) Number of Strands Material Chain Type Type Shaft Type Surface Treatment Roller Type Shape B 100 10 ～ 54 24 ～ 103 2 Steel RS Shaft Bore Machined Type Shaft Bore Machining Configurable - - From: 2,904,545 VND Days to Ship: Số ngày giao hàng: 11 Day(s) or more
11 Day(s) or more
-
Economy series
You can add up to 6 items per a category to the compare list.
MiSUMi EconomyMiSUMi EconomyMISUMI
This is an economy item, The price is cheaper than the MISUMI standard product.
- Volume Discount
Sprocket Shape Nominal Number Number of Teeth(T) Shaft Bore Dia. d(mm) Number of Strands Material Chain Type Type Shaft Type Surface Treatment Roller Type Shape B 12 11 ～ 25 14 ～ 50 1 Steel RS Pilot Hole Type / Shaft Bore Machined Type Standard Pilot Bore / Shaft Bore Machining Configurable Not Provided - From: 184,498 VND Days to Ship: Số ngày giao hàng: 5 Day(s) or more
5 Day(s) or more
-
You can add up to 6 items per a category to the compare list.
Standard Sprocket Model, Type 40B, Semi-F Series, Shaft Hole Machining Completed (New JIS Key)
KATAYAMA CHAIN
The semi-F series is a system for simple set up and rapid delivery of completed products with the desired machining (internal diameter, keyway, tap) of products with pilot holes completed.
Sprocket Shape Nominal Number Number of Teeth(T) Shaft Bore Dia. d(mm) Number of Strands Material Chain Type Type Shaft Type Surface Treatment Roller Type Shape B 40 8 ～ 90 10 ～ 60 1 Steel RS Shaft Bore Machined Type Shaft Bore Machining Configurable - - From: 461,583 VND Days to Ship: Số ngày giao hàng: 6 Day(s) or more
6 Day(s) or more
-
You can add up to 6 items per a category to the compare list.
Standard Sprocket Model, Type 80B, Semi-F Series, Shaft Hole Machining Completed (New JIS Key)
KATAYAMA CHAIN
The semi-F series is a system for simple set up and rapid delivery of completed products with the desired machining (internal diameter, keyway, tap) of products with pilot holes completed.
Sprocket Shape Nominal Number Number of Teeth(T) Shaft Bore Dia. d(mm) Number of Strands Material Chain Type Type Shaft Type Surface Treatment Roller Type Shape B 80 8 ～ 90 15 ～ 95 1 Steel RS Shaft Bore Machined Type Shaft Bore Machining Configurable - - From: 758,771 VND Days to Ship: Số ngày giao hàng: 11 Day(s) or more
11 Day(s) or more
-
You can add up to 6 items per a category to the compare list.
Sprocket, Standard Sprocket, 80B Type
KATAYAMA CHAIN
[Features]·Compatible Chain: No. 80. ·Sprocket Shape: B type.
Sprocket Shape Nominal Number Number of Teeth(T) Shaft Bore Dia. d(mm) Number of Strands Material Chain Type Type Shaft Type Surface Treatment Roller Type Shape B 80 8 ～ 90 14 ～ 26 1 / 2 Steel RS Pilot Hole Type Standard Pilot Bore - - From: 332,081 VND Days to Ship: Số ngày giao hàng: 6 Day(s) or more
6 Day(s) or more
-
You can add up to 6 items per a category to the compare list.
Sprocket, Standard Sprocket, 60B Type
KATAYAMA CHAIN
[Features]·The one provided with keyway is also selectable. ·Chain No. 60. [Materials]·Steel.
Sprocket Shape Nominal Number Number of Teeth(T) Shaft Bore Dia. d(mm) Number of Strands Material Chain Type Type Shaft Type Surface Treatment Roller Type Shape B 60 8 ～ 90 12 ～ 26 1 Steel RS Pilot Hole Type Standard Pilot Bore - - From: 184,681 VND Days to Ship: Số ngày giao hàng: 6 Day(s) or more
6 Day(s) or more
-
You can add up to 6 items per a category to the compare list.
KATAYAMA CHAIN
FBN finished sprocket has shaft hole tolerance H7, standard grade parallel keys that satisfy JIS standards, metric coarse machining, and hex socket head screws already inserted.
Sprocket Shape Nominal Number Number of Teeth(T) Shaft Bore Dia. d(mm) Number of Strands Material Chain Type Type Shaft Type Surface Treatment Roller Type Shape B 60 9 ～ 45 18 ～ 55 1 Steel RS Shaft Bore Machined Type Shaft Bore Machining Configurable Not Provided - From: 365,756 VND Days to Ship: Số ngày giao hàng: 6 Day(s) or more
6 Day(s) or more
-
You can add up to 6 items per a category to the compare list.
Standard 2052 Double Pitch Sprocket, R Roller B Type
KATAYAMA CHAIN
Rich lineup of variations in KANA standard sprocket count, number of teeth, and shape. The shaft holes of this product are not yet machined, so machining of shaft holes is required when using.
Sprocket Shape Nominal Number Number of Teeth(T) Shaft Bore Dia. d(mm) Number of Strands Material Chain Type Type Shaft Type Surface Treatment Roller Type Shape B C2052 7 ～ 30 20 ～ 26 1 Steel Double Pitch Pilot Hole Type Standard Pilot Bore Not Provided R Roller From: 424,186 VND Days to Ship: Số ngày giao hàng: 6 Day(s) or more
6 Day(s) or more
-
You can add up to 6 items per a category to the compare list.
Standard Sprocket - 120B - C type - Semi F Series - Shaft Holes Machined (New JIS Key)
KATAYAMA CHAIN
The semi-F series is a system for simple set up and rapid delivery of completed products with the desired machining (internal diameter, keyway, tap) of products with pilot holes completed.
Sprocket Shape Nominal Number Number of Teeth(T) Shaft Bore Dia. d(mm) Number of Strands Material Chain Type Type Shaft Type Surface Treatment Roller Type Shape B 120 10 ～ 50 24 ～ 103 1 Steel RS Shaft Bore Machined Type Shaft Bore Machining Configurable - - From: 2,035,016 VND Days to Ship: Số ngày giao hàng: 11 Day(s) or more
11 Day(s) or more
-
You can add up to 6 items per a category to the compare list.
MS Chain Coupling Sprocket With Shaft Bore Processing
SANKOSEISAKUSHO
With rational operation and labor-saving in mind, we maintain a large stock of JIS35 to JIS100 sprockets ready-machined with shaft bores, keyways, and set screws
Sprocket Shape Nominal Number Number of Teeth(T) Shaft Bore Dia. d(mm) Number of Strands Material Chain Type Type Shaft Type Surface Treatment Roller Type Shape B 40 ～ 60 12 ～ 22 14 ～ 65 1 Steel Others Shaft Bore Machined Type Shaft Bore Machining Configurable Not Provided - From: 563,630 VND Days to Ship: Số ngày giao hàng: 8 Day(s) or more
8 Day(s) or more
-
You can add up to 6 items per a category to the compare list.
Keyless Sprockets-35B Series/40B Series
MISUMI
No machining (keyway, etc.) to the shaft is required, so there is no reduction in shaft strength. Also, alignment is easy.
Sprocket Shape Nominal Number Number of Teeth(T) Shaft Bore Dia. d(mm) Number of Strands Material Chain Type Type Shaft Type Surface Treatment Roller Type Shape B 35 ～ 40 12 ～ 20 10 ～ 25 1 Steel RS Keyless Type Lock S Not Provided / Black Oxide - Days to Ship: Số ngày giao hàng: 8 Day(s) or more
8 Day(s) or more
-
You can add up to 6 items per a category to the compare list.
KATAYAMA CHAIN
Rich lineup of variations in KANA standard sprocket count, number of teeth, and shape. The shaft holes of this product are not yet machined, so machining of shaft holes is required when using.
Sprocket Shape Nominal Number Number of Teeth(T) Shaft Bore Dia. d(mm) Number of Strands Material Chain Type Type Shaft Type Surface Treatment Roller Type Shape B 25 10 ～ 80 6 ～ 12 1 Steel RS Pilot Hole Type Standard Pilot Bore Not Provided - From: 78,687 VND Days to Ship: Số ngày giao hàng: 6 Day(s) or more
6 Day(s) or more
-
You can add up to 6 items per a category to the compare list.
KATAYAMA CHAIN
[Features]·Compatible Chain: No. 35. ·Sprocket Shape: B type.
Sprocket Shape Nominal Number Number of Teeth(T) Shaft Bore Dia. d(mm) Number of Strands Material Chain Type Type Shaft Type Surface Treatment Roller Type Shape B 35 8 ～ 80 8 ～ 16 1 Steel RS Pilot Hole Type Standard Pilot Bore - - From: 91,146 VND Days to Ship: Số ngày giao hàng: 6 Day(s) or more
6 Day(s) or more
-
You can add up to 6 items per a category to the compare list.
KATAYAMA CHAIN
FBN finished sprocket has shaft hole tolerance H7, standard grade parallel keys that satisfy JIS standards, metric coarse machining, and hex socket head screws already inserted.
Sprocket Shape Nominal Number Number of Teeth(T) Shaft Bore Dia. d(mm) Number of Strands Material Chain Type Type Shaft Type Surface Treatment Roller Type Shape B 35 9 ～ 40 10 ～ 38 1 Steel RS Shaft Bore Machined Type Shaft Bore Machining Configurable Not Provided - From: 187,875 VND Days to Ship: Số ngày giao hàng: 6 Day(s) or more
6 Day(s) or more
-
You can add up to 6 items per a category to the compare list.
Stainless Steel Sprocket 25B Type
KATAYAMA CHAIN
Rich lineup of variations in KANA standard sprocket count, number of teeth, and shape. The shaft holes of this product are not yet machined, so machining of shaft holes is required when using.
Sprocket Shape Nominal Number Number of Teeth(T) Shaft Bore Dia. d(mm) Number of Strands Material Chain Type Type Shaft Type Surface Treatment Roller Type Shape B 25 10 ～ 32 6 ～ 10 1 Stainless Steel RS Pilot Hole Type Standard Pilot Bore Not Provided - From: 257,785 VND Days to Ship: Số ngày giao hàng: 6 Day(s) or more
6 Day(s) or more
-
You can add up to 6 items per a category to the compare list.
Standard Sprocket, 160B - C Form, Semi F Series, Shaft Holes Already Established (New JIS Key)
KATAYAMA CHAIN
The semi-F series is a system for simple set up and rapid delivery of completed products with the desired machining (internal diameter, keyway, tap) of products with pilot holes completed.
Sprocket Shape Nominal Number Number of Teeth(T) Shaft Bore Dia. d(mm) Number of Strands Material Chain Type Type Shaft Type Surface Treatment Roller Type Shape B 160 10 ～ 35 27 ～ 118 1 Steel RS Shaft Bore Machined Type Shaft Bore Machining Configurable - - From: 3,985,530 VND Days to Ship: Số ngày giao hàng: 11 Day(s) or more
11 Day(s) or more
-
You can add up to 6 items per a category to the compare list.
Standard Sprocket Model NK50-2B, Semi-F Series, Shaft Hole Machining Finish (New JIS Key)
KATAYAMA CHAIN
The semi-F series is a system for simple set up and rapid delivery of completed products with the desired machining (internal diameter, keyway, tap) of products with pilot holes completed.
Sprocket Shape Nominal Number Number of Teeth(T) Shaft Bore Dia. d(mm) Number of Strands Material Chain Type Type Shaft Type Surface Treatment Roller Type Shape B 50 10 ～ 70 14 ～ 80 2 Steel RS Shaft Bore Machined Type Shaft Bore Machining Configurable - - From: 1,016,158 VND Days to Ship: Số ngày giao hàng: 11 Day(s) or more
11 Day(s) or more
| BrandNhãn hiệu |
|---|
| Product SeriesDòng sản phẩm |
| CADCAD |
| From |
| Days to ShipSố ngày giao hàng |
| SpecificationsĐặc điểm kĩ thuật |
| Sprocket Shape |
| Nominal Number |
| Number of Teeth(T) |
| Shaft Bore Dia. d(mm) |
| Number of Strands |
| Material |
| Chain Type |
| Type |
| Shaft Type |
| Surface Treatment |
| Roller Type |
You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | |
| BrandNhãn hiệu | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | KATAYAMA CHAIN | KATAYAMA CHAIN | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | SANKOSEISAKUSHO | MISUMI | KATAYAMA CHAIN | MISUMI | KATAYAMA CHAIN | MISUMI | KATAYAMA CHAIN | SANKOSEISAKUSHO | MISUMI | SANKOSEISAKUSHO | KATAYAMA CHAIN | KATAYAMA CHAIN | KATAYAMA CHAIN | MISUMI | KATAYAMA CHAIN | KATAYAMA CHAIN | KATAYAMA CHAIN | KATAYAMA CHAIN | KATAYAMA CHAIN | KATAYAMA CHAIN | KATAYAMA CHAIN | SANKOSEISAKUSHO | MISUMI | KATAYAMA CHAIN | KATAYAMA CHAIN | KATAYAMA CHAIN | KATAYAMA CHAIN | KATAYAMA CHAIN | KATAYAMA CHAIN |
| Product SeriesDòng sản phẩm | Standard Sprocket 100B/C Type, Semi-F Series, Shaft Hole Machining Completed (New JIS Key) | Standard Sprocket Model, Type 25B, Semi-F Series, Shaft Hole Machining Completed (New JIS Key) | Standard Sprocket Model, Type 35B, Semi-F Series, Shaft Hole Machining Completed (New JIS Key) | Standard Sprocket, NK100-2B Form, Semi F Series, Shaft Holes Already Established (New JIS Key) | Standard Sprocket Model, Type 40B, Semi-F Series, Shaft Hole Machining Completed (New JIS Key) | Standard Sprocket Model, Type 80B, Semi-F Series, Shaft Hole Machining Completed (New JIS Key) | Standard Sprocket - 120B - C type - Semi F Series - Shaft Holes Machined (New JIS Key) | Standard Sprocket, 160B - C Form, Semi F Series, Shaft Holes Already Established (New JIS Key) | Standard Sprocket Model NK50-2B, Semi-F Series, Shaft Hole Machining Finish (New JIS Key) | ||||||||||||||||||||||||||||||||||||
| CADCAD |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| ||||
| From | 146,512 VND | 127,198 VND | 289,744 VND | 164,350 VND | 221,241 VND | 1,173,091 VND | 92,240 VND | 545,941 VND | 117,831 VND | 392,353 VND | 261,633 VND | 270,541 VND | 143,550 VND | 113,356 VND | 262,259 VND | 142,740 VND | 140,516 VND | 383,368 VND | 265,618 VND | 499,736 VND | 438,278 VND | 2,904,545 VND | 184,498 VND | 461,583 VND | 758,771 VND | 332,081 VND | 184,681 VND | 365,756 VND | 424,186 VND | 2,035,016 VND | 563,630 VND | 78,687 VND | 91,146 VND | 187,875 VND | 257,785 VND | 3,985,530 VND | 1,016,158 VND | ||||||||
| Days to ShipSố ngày giao hàng | Same day or more | Same day or more | Same day or more | 4 Day(s) or more | 4 Day(s) or more | Same day or more | Same day or more | 1 Day(s) | Same day or more | Same day or more | 6 Day(s) or more | Same day or more | 5 Day(s) or more | Same day or more | 4 Day(s) or more | Same day or more | 6 Day(s) or more | 4 Day(s) or more | 6 Day(s) or more | Same day or more | 6 Day(s) or more | Same day or more | 6 Day(s) or more | 6 Day(s) or more | Same day or more | 6 Day(s) or more | 6 Day(s) or more | 6 Day(s) or more | 11 Day(s) or more | 5 Day(s) or more | 6 Day(s) or more | 11 Day(s) or more | 6 Day(s) or more | 6 Day(s) or more | 6 Day(s) or more | 6 Day(s) or more | 11 Day(s) or more | 8 Day(s) or more | 8 Day(s) or more | 6 Day(s) or more | 6 Day(s) or more | 6 Day(s) or more | 6 Day(s) or more | 11 Day(s) or more | 11 Day(s) or more |
| SpecificationsĐặc điểm kĩ thuật | |||||||||||||||||||||||||||||||||||||||||||||
| Sprocket Shape | Shape B | Shape B | Shape B | Shape B | Shape B | Shape B | Shape B | Shape B | Shape B | Shape B | Shape B | Shape B | Shape B | Shape B | Shape B | Shape B | Shape B | Shape B | Shape B | Shape B | Shape B | Shape B | Shape B | Shape B | Shape B | Shape B | Shape B | Shape B | Shape B | Shape B | Shape B | Shape B | Shape B | Shape B | Shape B | Shape B | Shape B | Shape B | Shape B | Shape B | Shape B | Shape B | Shape B | Shape B | Shape B |
| Nominal Number | 8 | 40 | 40 | 50 | 60 | 35 | 25 | 50 | 35 | 40 | 100 | 6 | 60 | 25 | 80 | 80 | 35 ～ 120 | 15 | 50 | 10 | 40 | 16 | 50 | 25 ～ 160 | 20 | 35 ～ 100 | 25 | 35 | 100 | 12 | 40 | 80 | 80 | 60 | 60 | C2052 | 120 | 40 ～ 60 | 35 ～ 40 | 25 | 35 | 35 | 25 | 160 | 50 |
| Number of Teeth(T) | 10 ～ 25 | 9 ～ 15 | 9 ～ 40 | 9 ～ 35 | 9 ～ 30 | 9 ～ 40 | 16 ～ 40 | 12 | 9 ～ 18 | 9 ～ 50 | 9 ～ 65 | 10 ～ 25 | 14 ～ 15 | 16 ～ 32 | 9 ～ 21 | 12 | 10 ～ 60 | 11 ～ 35 | 9 ～ 50 | 10 ～ 25 | 8 ～ 90 | 11 ～ 25 | 8 ～ 90 | 9 ～ 75 | 10 ～ 20 | 9 ～ 60 | 10 ～ 80 | 8 ～ 80 | 10 ～ 54 | 11 ～ 25 | 8 ～ 90 | 8 ～ 90 | 8 ～ 90 | 8 ～ 90 | 9 ～ 45 | 7 ～ 30 | 10 ～ 50 | 12 ～ 22 | 12 ～ 20 | 10 ～ 80 | 8 ～ 80 | 9 ～ 40 | 10 ～ 32 | 10 ～ 35 | 10 ～ 70 |
| Shaft Bore Dia. d(mm) | 10 ～ 38 | 9 ～ 25 | 10K ～ 40 | 15 ～ 45 | 19 ～ 50 | 10 ～ 30 | 10 ～ 20 | 15 | 8 ～ 20 | 10 ～ 45 | 21 ～ 103 | 8 ～ 25 | 20 | 9 ～ 15 | 25 ～ 50 | 15 ～ 40 | 9 ～ 33 | 5 ～ 16 | 14 ～ 50 | 10 ～ 40 | 9 ～ 20 | 16 ～ 50 | 10 ～ 20 | 6 ～ 38 | 20 ～ 50 | 10 ～ 60 | 7 ～ 30 | 9 ～ 45 | 24 ～ 103 | 14 ～ 50 | 10 ～ 60 | 15 ～ 95 | 14 ～ 26 | 12 ～ 26 | 18 ～ 55 | 20 ～ 26 | 24 ～ 103 | 14 ～ 65 | 10 ～ 25 | 6 ～ 12 | 8 ～ 16 | 10 ～ 38 | 6 ～ 10 | 27 ～ 118 | 14 ～ 80 |
| Number of Strands | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 2 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 2 | 1 | 1 | 1 | 1 / 2 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 2 |
| Material | Steel | Steel | Steel / Stainless Steel | Steel / Stainless Steel | Steel / Stainless Steel | Steel / Stainless Steel | Steel / Stainless Steel | Steel | Steel | Steel | Steel | Steel | Steel | Steel | Steel | Steel | Steel | Steel | Steel | Steel | Steel | Steel | Steel | Steel | Steel | Steel | Steel | Steel | Steel | Steel | Steel | Steel | Steel | Steel | Steel | Steel | Steel | Steel | Steel | Steel | Steel | Steel | Stainless Steel | Steel | Steel |
| Chain Type | RS | RS | RS | RS | RS | RS | RS | RS | RS | RS | RS | RS | RS | RS | RS | RS | Others | RS | RS | RS | RS | - | RS | Others | - | Others | RS | RS | RS | RS | RS | RS | RS | RS | RS | Double Pitch | RS | Others | RS | RS | RS | RS | RS | RS | RS |
| Type | Pilot Hole Type / Shaft Bore Machined Type | Pilot Hole Type / Shaft Bore Machined Type | Pilot Hole Type / Shaft Bore Machined Type | Pilot Hole Type / Shaft Bore Machined Type | Pilot Hole Type / Shaft Bore Machined Type | Pilot Hole Type / Shaft Bore Machined Type | Pilot Hole Type / Shaft Bore Machined Type | Shaft Bore Machined Type | Pilot Hole Type / Shaft Bore Machined Type | Shaft Bore Machined Type | Shaft Bore Machined Type | Pilot Hole Type / Shaft Bore Machined Type | Shaft Bore Machined Type | Pilot Hole Type / Shaft Bore Machined Type | Pilot Hole Type / Shaft Bore Machined Type | Pilot Hole Type / Shaft Bore Machined Type | Pilot Hole Type | Pilot Hole Type / Shaft Bore Machined Type | Shaft Bore Machined Type | Pilot Hole Type / Shaft Bore Machined Type | Pilot Hole Type | Pilot Hole Type / Shaft Bore Machined Type | Pilot Hole Type | Pilot Hole Type | Pilot Hole Type / Shaft Bore Machined Type | Shaft Bore Machined Type | Shaft Bore Machined Type | Shaft Bore Machined Type | Shaft Bore Machined Type | Pilot Hole Type / Shaft Bore Machined Type | Shaft Bore Machined Type | Shaft Bore Machined Type | Pilot Hole Type | Pilot Hole Type | Shaft Bore Machined Type | Pilot Hole Type | Shaft Bore Machined Type | Shaft Bore Machined Type | Keyless Type | Pilot Hole Type | Pilot Hole Type | Shaft Bore Machined Type | Pilot Hole Type | Shaft Bore Machined Type | Shaft Bore Machined Type |
| Shaft Type | Standard Pilot Bore / Shaft Bore Machining Configurable | Standard Pilot Bore / Shaft Bore Machining Configurable | Standard Pilot Bore / Shaft Bore Machining Configurable | Standard Pilot Bore / Shaft Bore Machining Configurable | Standard Pilot Bore / Shaft Bore Machining Configurable | Standard Pilot Bore / Shaft Bore Machining Configurable | Standard Pilot Bore / Shaft Bore Machining Configurable | Shaft Bore Machining Configurable | Standard Pilot Bore / Shaft Bore Machining Configurable | Shaft Bore Machining Configurable | Shaft Bore Machining Configurable | Standard Pilot Bore / Shaft Bore Machining Configurable | Shaft Bore Machining Configurable | Standard Pilot Bore / Shaft Bore Machining Configurable | Standard Pilot Bore / Shaft Bore Machining Configurable | Standard Pilot Bore / Shaft Bore Machining Configurable | Standard Pilot Bore | Standard Pilot Bore / Shaft Bore Machining Configurable | Shaft Bore Machining Configurable | Standard Pilot Bore / Shaft Bore Machining Configurable | Standard Pilot Bore | Standard Pilot Bore / Shaft Bore Machining Configurable | Standard Pilot Bore | Standard Pilot Bore | Standard Pilot Bore / Shaft Bore Machining Configurable | Shaft Bore Machining Configurable | Shaft Bore Machining Configurable | Shaft Bore Machining Configurable | Shaft Bore Machining Configurable | Standard Pilot Bore / Shaft Bore Machining Configurable | Shaft Bore Machining Configurable | Shaft Bore Machining Configurable | Standard Pilot Bore | Standard Pilot Bore | Shaft Bore Machining Configurable | Standard Pilot Bore | Shaft Bore Machining Configurable | Shaft Bore Machining Configurable | Lock S | Standard Pilot Bore | Standard Pilot Bore | Shaft Bore Machining Configurable | Standard Pilot Bore | Shaft Bore Machining Configurable | Shaft Bore Machining Configurable |
| Surface Treatment | Not Provided | Not Provided | Not Provided / Black Oxide | Not Provided / Black Oxide | Not Provided / Black Oxide | Not Provided / Black Oxide | Not Provided | Not Provided | Not Provided | Not Provided | - | Not Provided | Not Provided | Not Provided | Not Provided | Not Provided | Not Provided | Not Provided | Not Provided | Not Provided | - | Not Provided | - | Not Provided / Tooth Surface Hardening | Not Provided | Not Provided | Not Provided | - | - | Not Provided | - | - | - | - | Not Provided | Not Provided | - | Not Provided | Not Provided / Black Oxide | Not Provided | - | Not Provided | Not Provided | - | - |
| Roller Type | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | R Roller | - | - | - | - | - | - | - | - | - |
Loading...Tải…
ConfigureTạo
Specification/DimensionsĐặc điểm kỹ thuật / Kích thướcĐặc điểm kỹ thuật / Kích thước
-
Sprocket Shape
-
Shape A -
Shape B -
Shape C -
Shape SD
-
-
Nominal Number
-
Number of Teeth(T)
-
Shaft Bore Dia. d(mm)
- 4
- 5
- 6
- 7
- 8
- 9
- 9.53
- 10
- 10K
- 11
- 12
- 12.7
- 13
- 14
- 15
- 16
- 17
- 18
- 19
- 20
- 21
- 22
- 23
- 24
- 25
- 26
- 27
- 28
- 29
- 30
- 31
- 32
- 33
- 34
- 35
- 36
- 37
- 38
- 39
- 40
- 41
- 42
- 43
- 44
- 45
- 46
- 47
- 48
- 49
- 50
- 51
- 52
- 53
- 54
- 55
- 56
- 57
- 58
- 59
- 60
- 61
- 62
- 63
- 64
- 65
- 66
- 67
- 68
- 69
- 70
- 71
- 72
- 73
- 74
- 75
- 76
- 77
- 78
- 79
- 80
- 81
- 82
- 83
- 84
- 85
- 86
- 87
- 88
- 89
- 90
- 91
- 92
- 93
- 94
- 95
- 96
- 97
- 98
- 99
- 100
- 101
- 102
- 103
- 104
- 105
- 106
- 107
- 108
- 109
- 110
- 111
- 112
- 113
- 114
- 115
- 116
- 117
- 118
- 119
- 120
- 121
- 122
- 123
- 124
- 125
- 126
- 127
- 128
- 129
- 130
- 131
- 132
- 133
- 134
- 135
- 136
- 137
- 138
- 139
- 140
- 141
- 142
- 143
- 144
- 145
- 146
- 147
- 148
- 149
- 150
- 151
- 152
- 153
- 154
- 155
-
Number of Strands
- 1
- 2
-
Material
- Steel
- Stainless Steel
- Engineering Plastic
- C3604B (Free-Cutting Brass Bar)
-
Chain Type
-
Type
- Pilot Hole Type
- Shaft Bore Machined Type
- Keyless Type
-
Shaft Type
-
Surface Treatment
-
Roller Type
Application example related to this categoryVí dụ ứng dụng liên quan đến danh mục này
Related Categories to SprocketsDanh mục liên quan đến Sprockets
FAQ Sprockets
- Question: What are sprockets and how are they used in mechanical systems?
- Answer: Chain sprockets are mechanical components used in combination with chains to enable drive forces to be transmitted via a chain. The sprocket teeth engage with the chain links to establish a connection between the sprocket and the chain. Sprockets are crucial elements in the design and mechanics of machines and systems, indispensable for the mechanical transmission of movement and force, for example, in chain conveyors, packaging machines, and printing presses.
- Question: Can you explain the different types of sprockets, such as A, B, and C types?
- Answer: Chain sprockets are categorized into four main types of sprockets as established by the American National Standards Institute (ANSI):
1. Type A sprockets have no hubs, consisting solely of the plate with teeth.
2. Type B sprockets have a hub on one side for heavy loads and larger systems.
3. Type C sprockets, which have hubs of equal thickness on both sides of the plate for heavy loads and larger systems.
4. Type C (Offset) sprockets, also referred to as Type D, have two unequal-sized hubs, forming an asymmetric sprocket The choice of sprocket type depends on the specific requirements of the machine or system, such as space constraints, load capacity, and desired performance characteristics. - Question: What materials are commonly used to manufacture sprockets, and why?
- Answer: Chain sprockets are commonly manufactured using various materials, each chosen for specific applications and performance characteristics. The most common materials for chain sprockets include:
1.Carbon Steel: Suitable for solid sprockets in non-corrosive environments. It offers good wear resistance and is cost-effective.
2.Stainless Steel: Used for solid sprockets in corrosive environments. It provides excellent corrosion resistance and durability, such as in vegetable processing.
3.Plastic (UHMW Polyethylene and Nylon): These materials are used for sprockets in food processing and other industries where cleanliness and low friction are important. UHMW Polyethylene can withstand continuous temperatures up to 180°F, while Nylon sprockets provide 2-3 times the strength of UHMW and can withstand higher temperatures - Question: How does the number of teeth on a sprocket affect its performance?
- Answer: The number of teeth on a chain sprocket significantly impacts its performance. More teeth result in higher torque but lower speed, while fewer teeth lead to higher speed but less torque, following gear ratio principles. This choice affects wear and durability, as fewer teeth concentrate load, potentially increasing wear, while more teeth distribute load, enhancing durability. Additionally, sprockets with more teeth often provide smoother motion, reducing noise and vibration. Spatial constraints within the system must also be considered. Overall, the number of teeth on a chain sprocket is critical, influencing torque, speed, wear, durability, smoothness of operation.
- Question: What should be considered when selecting a sprocket for a specific application?
- Answer: Factors to consider when selecting a chain sprocket:
1. Chain Size: Ensure compatibility with the chain's size, pitch, and width for proper engagement and wear prevention.
2. Number of Teeth: Determine the appropriate number of teeth to balance speed, torque, and efficiency, considering the input-output relationship.
3. Material: Choose the sprocket material based on environmental conditions, load capacity, temperature range, and chemical resistance. Options include carbon steel, stainless steel, and plastic.
4. Shaft Size: Ensure compatibility with shaft size and type.
5. Alignment: Properly align the sprocket with the chain and other system components to prevent premature wear and ensure optimal performance.
6. Lubrication: Use appropriate lubrication compatible with the sprocket material and environmental conditions to prevent wear and extend the life of the chain and sprocket. - Question: How does the material of a sprocket influence its strength and friction resistance?
- Answer: When selecting material for chain sprockets, several key factors must be considered:
1. Selection Criteria: Material choice based on environmental conditions, load capacity, temperature range, and chemical resistance.
2. Strength and Friction Resistance: Material choice significantly impacts these characteristics.
3. Hardening Process: Essential for enhancing wear resistance and shock load absorption in sprocket teeth.
4. Optimization: The right material and hardening process optimize strength and friction resistance for specific applications.
How can we improve?
How can we improve?
While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
Customer Privacy Policy
Thank you for your cooperation.
While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
Please use the inquiry form.
Customer Privacy Policy