Lamp Fixtures for Inspection（Light Type：Visible Light Page2）

• You can add up to 6 items per a category to the compare list. Compare

  

  Flat Direct Ring Lighting OPDR-F Series

  OPTEX FA

  Direct ring lighting capable of illuminating a wide area.

  CAD ：

  2D

  Light Type	Main Body Type	Emitting Color	Irradiation Direction	Light Source	Irradiation Light Type	External Dimension D (Range)(mm)	Width W (Range)(mm)	Length L (Range)(mm)	Power Consumption (Range)(W)	Center Hole Size d (Range)(mm)	Height H (Range)(mm)
  Visible Light	Ring Type	Red / White / Blue	Vertical Illumination	Self Emission Type	Direct Light	30.1~50 / 50.1~80 / 80.1~100 / 100.1~130	-	-	1.1~2 ～ 8.1~10	5~20 / 30.1~40 / 40.1~50 / 50.1~70	15.1~20 / 20.1~30

  From: 6,945,184 VND
  Days to Ship: Số ngày giao hàng: 22 Day(s) or more

  22 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Sensing Bar Lighting OPB-S Series

  OPTEX FA

  Bar lighting is three times brighter than conventional models and is equipped with a sensing function.[Features]· Provides luminance monitoring via the built-in sensor and long term stability via feedback.· Equipped with FALUX sensing.· The built-in photodiodes sense the luminance of the LED lighting.· Accurately measures the emitted luminance not just during continuous lighting conditions, but also under conditions where the light infrequently flashes on and off.· Furthermore, as well as the luminance of the emitted light, the internal temperature is also measured in the lighting itself, which can then be monitored on the power supply side.· Feedback control based off these monitored values is also possible using the OPPF series controller.· The absolute luminance makes adjusting for instrumentation errors for multiple light units easy.· The luminance at the time of shipping from the factory and the absolute luminance unique to the model are stored in the internal memory. The values can be referenced from the OPPF series.· With this, in addition to being able to monitor any changes in the luminosity values, adjusting for errors in the instrumentation for multiple lighting units is made easier by being able to compare the values with the absolute luminance value.· Inherits the performance of the popular OPB series.· Only 3.5 mm taller, even with the sensor built-in.· Corrections of fluctuations in brightness due to the FALUX and the excellent optical characteristics can be used as is.

  CAD ：

  2D / 3D

  Light Type	Main Body Type	Emitting Color	Irradiation Direction	Light Source	Irradiation Light Type	External Dimension D (Range)(mm)	Width W (Range)(mm)	Length L (Range)(mm)	Power Consumption (Range)(W)	Center Hole Size d (Range)(mm)	Height H (Range)(mm)
  Visible Light	Bar Type	White	Oblique Ray	Self Emission Type	Direct Light	-	40.1~60 / 100.1~150 / 150.1~200 / 200.1~250 / 250.1~	10~30	3.1~4 ～ 10.1~20	-	20.1~30

  From: 9,464,965 VND
  Days to Ship: Số ngày giao hàng: 8 Day(s) or more

  8 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Direct Bar Lighting

  OPTEX FA

  [Features]· Can be used widely as oblique lighting or as a backlight.· Bar lighting with LEDs mounted onto a flat substrate.· The illumination angle is variable, allowing illumination from the optimal position.· Reflection can be suppressed by installing a diffuser plate.· Has a degree of freedom in terms of installation, allowing for use in a wide range of applications.· Can be used as a high luminance surface lighting.

  CAD ：

  2D

  Light Type	Main Body Type	Emitting Color	Irradiation Direction	Light Source	Irradiation Light Type	External Dimension D (Range)(mm)	Width W (Range)(mm)	Length L (Range)(mm)	Power Consumption (Range)(W)	Center Hole Size d (Range)(mm)	Height H (Range)(mm)
  Visible Light	Bar Type	Red / White / Blue	Vertical Illumination / Oblique Ray / Backlight	Self Emission Type	Direct Light	-	25.1~40	10~30	0.1~1	-	20.1~30

  From: 4,407,305 VND
  Days to Ship: Số ngày giao hàng: 22 Day(s) or more

  22 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Surface Illumination Dome Type Light without Shade IDM/IDM3/IDM4 Series

  LVS

  CAD ：

  3D

  Light Type	Main Body Type	Emitting Color	Irradiation Direction	Light Source	Irradiation Light Type	External Dimension D (Range)(mm)	Width W (Range)(mm)	Length L (Range)(mm)	Power Consumption (Range)(W)	Center Hole Size d (Range)(mm)	Height H (Range)(mm)
  Visible Light	Round Type	Red / White / Blue / Green	-	-	Surface Emitted Light	30.1~50 / 50.1~80 / 80.1~100 / 130.1~150	-	-	0.1~1 ～ 10.1~20	5~20 / 20.1~30 / 30.1~40	30.1~40 / 40.1~70 / 70.1~100

  From: 14,870,410 VND
  Days to Ship: Số ngày giao hàng: 11 Day(s)

  11 Day(s)

• You can add up to 6 items per a category to the compare list. Compare

  

  White LED lighting device

  MIRUC OPTICAL

  Low-cost white LED lighting using a penlight. Since there is no need to route cables around, it is useful around machinery and equipment. The workpiece can be clearly observed, reducing eye fatigue.

  CAD ：

  2D

  Light Type	Main Body Type	Emitting Color	Irradiation Direction	Light Source	Irradiation Light Type	External Dimension D (Range)(mm)	Width W (Range)(mm)	Length L (Range)(mm)	Power Consumption (Range)(W)	Center Hole Size d (Range)(mm)	Height H (Range)(mm)
  Visible Light	Bar Type	White	Vertical Illumination	Fiber Head	Direct Light	-	-	-	-	-	-

  From: 10,119,941 VND
  Days to Ship: Số ngày giao hàng: 6 Day(s) or more

  6 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  White spot LED lighting device

  MIRUC OPTICAL

  Enables workpieces to be observed with clarity and with reduced eye fatigue.

  Light Type	Main Body Type	Emitting Color	Irradiation Direction	Light Source	Irradiation Light Type	External Dimension D (Range)(mm)	Width W (Range)(mm)	Length L (Range)(mm)	Power Consumption (Range)(W)	Center Hole Size d (Range)(mm)	Height H (Range)(mm)
  Visible Light	Spot Type	White	Vertical Illumination	Fiber Head	Direct Light	-	-	-	-	-	-

  From: 21,022,323 VND
  Days to Ship: Số ngày giao hàng: 6 Day(s) or more

  6 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Bifurcated fiber lighting device

  MIRUC OPTICAL

  Spot lighting from two branches. The semi-lock type SUS tube can be fixed at any position. By changing the angle of illumination from 2 directions, the edges can be emphasized, and the light can be well wrapped around workpieces having uneven surfaces or twisted shapes.

  Light Type	Main Body Type	Emitting Color	Irradiation Direction	Light Source	Irradiation Light Type	External Dimension D (Range)(mm)	Width W (Range)(mm)	Length L (Range)(mm)	Power Consumption (Range)(W)	Center Hole Size d (Range)(mm)	Height H (Range)(mm)
  Visible Light	Spot Type	White	Vertical Illumination	Fiber Head	Direct Light	-	-	-	-	-	-

  From: 34,368,484 VND
  Days to Ship: Số ngày giao hàng: 6 Day(s) or more

  6 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  White LED lighting device (separated type)

  MIRUC OPTICAL

  A lighting device in which the LED lighting section and the power supply controller are separated. The LED light attached to the objective lens is compact (ø40), making it suitable for applications in narrow spaces.

  Light Type	Main Body Type	Emitting Color	Irradiation Direction	Light Source	Irradiation Light Type	External Dimension D (Range)(mm)	Width W (Range)(mm)	Length L (Range)(mm)	Power Consumption (Range)(W)	Center Hole Size d (Range)(mm)	Height H (Range)(mm)
  Visible Light	Ring Type	White	Vertical Illumination	Self Emission Type	Diffused Light	-	-	-	-	5~20	-

  From: 12,047,550 VND
  Days to Ship: Số ngày giao hàng: 6 Day(s) or more

  6 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  White LED lighting equipment ML-TV3 (for coaxial epi‐illumination)

  MIRUC OPTICAL

  Ultra-compact, lightweight, long lifespan, low-power consumption spot lighting. A simple power supply with adjustable light intensity contributes to space saving. Compatible with various coaxial epi-illumination lenses. Cable length L = 500 mm

  Light Type	Main Body Type	Emitting Color	Irradiation Direction	Light Source	Irradiation Light Type	External Dimension D (Range)(mm)	Width W (Range)(mm)	Length L (Range)(mm)	Power Consumption (Range)(W)	Center Hole Size d (Range)(mm)	Height H (Range)(mm)
  Visible Light	Spot Type	White	Vertical Illumination	Fiber Head	Direct Light	-	-	-	-	-	-

  From: 21,022,323 VND
  Days to Ship: Số ngày giao hàng: 21 Day(s) or more

  21 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Sensing Ring Lighting (with Built-In Temperature Protection Circuit) OPR-SF Series

  OPTEX FA

  No strobe power supply required. Ultra high luminance ring lighting

  CAD ：

  2D / 3D

  Light Type	Main Body Type	Emitting Color	Irradiation Direction	Light Source	Irradiation Light Type	External Dimension D (Range)(mm)	Width W (Range)(mm)	Length L (Range)(mm)	Power Consumption (Range)(W)	Center Hole Size d (Range)(mm)	Height H (Range)(mm)
  Visible Light	Ring Type	White	Vertical Illumination	Self Emission Type	Direct Light	30.1~50 / 50.1~80 / 80.1~100	-	-	8.1~10 ～ 20.1~30	5~20 / 20.1~30 / 40.1~50 / 50.1~70	15.1~20

  From: 9,419,130 VND
  Days to Ship: Số ngày giao hàng: 8 Day(s) or more

  8 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Edge Type Backlight OPEM-H/OPEM Series

  OPTEX FA

  A thin-type backlight that delivers highly uniform illumination.

  CAD ：

  2D

  Light Type	Main Body Type	Emitting Color	Irradiation Direction	Light Source	Irradiation Light Type	External Dimension D (Range)(mm)	Width W (Range)(mm)	Length L (Range)(mm)	Power Consumption (Range)(W)	Center Hole Size d (Range)(mm)	Height H (Range)(mm)
  Visible Light	Square Type	White	Backlight	Self Emission Type	Surface Emitted Light	-	25.1~40 / 40.1~60	30.1~50 ～ 50.1~80	0.1~1 ～ 1.1~2	-	5~15

  From: 7,768,849 VND
  Days to Ship: Số ngày giao hàng: 24 Day(s) or more

  24 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Full Color Lighting RGB Series

  OPTEX FA

  Delivers the ideal lighting color for workpieces and in full color.

  CAD ：

  2D

  Light Type	Main Body Type	Emitting Color	Irradiation Direction	Light Source	Irradiation Light Type	External Dimension D (Range)(mm)	Width W (Range)(mm)	Length L (Range)(mm)	Power Consumption (Range)(W)	Center Hole Size d (Range)(mm)	Height H (Range)(mm)
  Visible Light	Square Type	Combined Color of Red, Green and Blue	Backlight	Self Emission Type	Surface Emitted Light	-	60.1~80	50.1~80	6.1~8	-	5~15

  From: 27,566,314 VND
  Days to Ship: Số ngày giao hàng: 24 Day(s) or more

  24 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Low Angle Ring Light (Direct Light) IDR-LA Series

  IMAC

  General purpose ring lighting ideal for scratch inspection/edge detection by illuminating from a low angle.[Features]· Mounted on direct ring lighting at an angle.· Ideal for edge detection and scratch inspection with oblique irradiation.· The lineup contains various sizes, from standard outer diameters of 40 mm / internal diameter 15 mm to external diameter 200 mm/ internal diameter 170 mm.· Light color: Can be selected from white / red / blue / green.[Applications]· Ideal for inspecting tablets or powder for foreign matter and scratches or dirt.· Useful for reading engraved text on metal surfaces or substrate and sheet edge extraction.

  CAD ：

  2D / 3D

  Light Type	Main Body Type	Emitting Color	Irradiation Direction	Light Source	Irradiation Light Type	External Dimension D (Range)(mm)	Width W (Range)(mm)	Length L (Range)(mm)	Power Consumption (Range)(W)	Center Hole Size d (Range)(mm)	Height H (Range)(mm)
  Visible Light	Ring Type	Red / White / Blue / Green	Oblique Ray	Self Emission Type	Direct Light	30.1~50 / 50.1~80 / 80.1~100 / 100.1~130 / 130.1~150 / 150.1~200	-	-	2.1~3 ～ 10.1~20	5~20 / 20.1~30 / 40.1~50 / 50.1~70 / 101~130 / 131~200	15.1~20 / 20.1~30

  From: 6,222,588 VND
  Days to Ship: Số ngày giao hàng: 8 Day(s) or more

  8 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Horizontal Opposed Ring Light (Direct Light) IDRA-T Series

  IMAC

  General-purpose ring lighting that can emphasize irregularities by irradiation in the horizontal direction.[Features]· Shell type LEDs are mounted horizontally.· Ideal for edge detection and minute scratch inspection using horizontal irradiation.· The lineup contains various sizes, from standard outer diameters of 78 mm / internal diameter 46 mm to external diameter 206 mm/ internal diameter 170 mm.· Light color: Can be selected from white / red / blue / green.[Applications]· Ideal for inspecting tablets or powder for foreign matter and fine scratches or dirt.· Useful for reading engraved text on metal surfaces.· Optimal for circuit board and sheet edge extraction.

  CAD ：

  2D / 3D

  Light Type	Main Body Type	Emitting Color	Irradiation Direction	Light Source	Irradiation Light Type	External Dimension D (Range)(mm)	Width W (Range)(mm)	Length L (Range)(mm)	Power Consumption (Range)(W)	Center Hole Size d (Range)(mm)	Height H (Range)(mm)
  Visible Light	Ring Type	Red / White / Blue / Green	Oblique Ray	Self Emission Type	Direct Light	50.1~80 / 80.1~100 / 100.1~130 / 150.1~200	-	-	2.1~3 ～ 5.1~6	40.1~50 / 50.1~70 / 70.1~100 / 101~130	5~15

  From: 14,035,313 VND
  Days to Ship: Số ngày giao hàng: 13 Day(s) or more

  13 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  High Luminance B'C Line Lighting (1 Row Specification, Direct Light, Wide Angle/Narrow Angle) IDBA-LEH Series

  IMAC

  Direct-type bar lighting optimal for large workpieces and long distances.[Features]· 2 to 3 times brighter than IDBA-LE series. Light color can be selected from white / red / blue.· Narrow angle lighting type (L) that is optimal for long-distance lighting (WD 200 to 3,000 mm).· Wide angle lighting type (S) that is optimal for short-distance lighting (WD 80 to 200 mm).· Optimal for environments where lighting cannot be installed nearby and for applications for uniform irradiation within large trays.· 75 mm (12 V specification)/150 mm (24 V specification) increments up to 1,800 mm are supported.[Applications]· Ideal for printing and visual inspections of large workpieces (cardboard).· Convenient for use as an auxiliary light source in inspection equipment for applications that require a high speed shutter, such as transporting workpieces.

  CAD ：

  2D

  Light Type	Main Body Type	Emitting Color	Irradiation Direction	Light Source	Irradiation Light Type	External Dimension D (Range)(mm)	Width W (Range)(mm)	Length L (Range)(mm)	Power Consumption (Range)(W)	Center Hole Size d (Range)(mm)	Height H (Range)(mm)
  Visible Light	Bar Type	White	Vertical Illumination	Self Emission Type	Direct Light	-	80.1~100	30.1~50	6.1~8	-	30.1~40

  From: 11,261,210 VND
  Days to Ship: Số ngày giao hàng: 18 Day(s) or more

  18 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Bar Lighting (Direct Light / Diffused Light) IDBA Series

  IMAC

  General purpose bar lighting.It can be used widely, including oblique irradiation and transmission applications.

  CAD ：

  2D / 3D

  Light Type	Main Body Type	Emitting Color	Irradiation Direction	Light Source	Irradiation Light Type	External Dimension D (Range)(mm)	Width W (Range)(mm)	Length L (Range)(mm)	Power Consumption (Range)(W)	Center Hole Size d (Range)(mm)	Height H (Range)(mm)
  Visible Light	Bar Type	Red / White / Blue / Green	Vertical Illumination	Self Emission Type	Direct Light	-	25.1~40 / 40.1~60 / 60.1~80 / 80.1~100 / 100.1~150 / 200.1~250 / 250.1~	10~30 ～ 100.1~150	0.1~1 ～ 20.1~30	-	5~15 / 20.1~30 / 30.1~40

  From: 4,269,271 VND
  Days to Ship: Số ngày giao hàng: 13 Day(s) or more

  13 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Square Edgelight Illuminator (Surface Emitting, Thin Type) IFLA/IFL Series

  IMAC

  Thin surface light-emitting fitting.Backlight illumination achieves vivid silhouette images. The IFLA series has a 6 mm thickness that allows it to be installed even in places without much space. Energy saving/low heat-generation type with uniform surface emission.

  CAD ：

  2D / 3D

  Light Type	Main Body Type	Emitting Color	Irradiation Direction	Light Source	Irradiation Light Type	External Dimension D (Range)(mm)	Width W (Range)(mm)	Length L (Range)(mm)	Power Consumption (Range)(W)	Center Hole Size d (Range)(mm)	Height H (Range)(mm)
  Visible Light	Square Type	Red / White / Blue	Backlight	Self Emission Type	Surface Emitted Light	-	25.1~40 / 40.1~60 / 80.1~100	30.1~50 ～ 50.1~80	0.1~1 ～ 2.1~3	-	5~15

  From: 6,779,271 VND
  Days to Ship: Số ngày giao hàng: 8 Day(s) or more

  8 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Square Surface Lighting (Indirect Light) IPQC Series

  IMAC

  Indirect lighting fixture with a low angle that illuminates from 4 directions.Uses high-power LEDs for at least 10 times as much light as conventional products. Ideal for engraving/edge extraction of square workpieces.

  CAD ：

  2D / 3D

  Light Type	Main Body Type	Emitting Color	Irradiation Direction	Light Source	Irradiation Light Type	External Dimension D (Range)(mm)	Width W (Range)(mm)	Length L (Range)(mm)	Power Consumption (Range)(W)	Center Hole Size d (Range)(mm)	Height H (Range)(mm)
  Visible Light	Square Hole Type	Red / White / Blue	Oblique Ray	Self Emission Type	Diffused Light	-	25.1~40 / 40.1~60 / 60.1~80 / 80.1~100	30.1~50 ～ 80.1~100	4.1~5 ～ 10.1~20	-	20.1~30

  From: 22,121,996 VND
  Days to Ship: Số ngày giao hàng: 8 Day(s) or more

  8 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Coaxial Vertical Pseudo Lighting IFV Series

  IMAC

  Pseudo coaxial epi-illumination from the same optical axis as the camera axis, using a half mirror.[Features]· It enables inspection with specular reflection, making it effective for inspection of fine surface scratches and print/character inspection.· Available in 6 opening sizes from 13 mm to 100 mm.· BS (Beam Splitter) types help suppress ghost images.· Since the C01 type allows camera mounting in the horizontal direction, it can be selected according to the equipment space.· Light color can be selected from white / red / blue / green.[Applications]· Optimal for inspections of substrate patterns, sheet letters, gloss surface scratches, and characters.· Convenient for the pitch measurement of connector pins.

  CAD ：

  2D / 3D

  Light Type	Main Body Type	Emitting Color	Irradiation Direction	Light Source	Irradiation Light Type	External Dimension D (Range)(mm)	Width W (Range)(mm)	Length L (Range)(mm)	Power Consumption (Range)(W)	Center Hole Size d (Range)(mm)	Height H (Range)(mm)
  Visible Light	Square Type	Red / White / Blue / Green	Coaxial Vertical	Self Emission Type	Surface Emitted Light	-	40.1~60 / 60.1~80 / 80.1~100 / 100.1~150	10~30 ～ 80.1~100	0.1~1 ～ 10.1~20	-	15.1~20 / 20.1~30 / 30.1~40 / 40.1~70 / 70.1~100

  From: 12,919,756 VND
  Days to Ship: Số ngày giao hàng: 13 Day(s) or more

  13 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Collimate Light (Pseudo Collimated Light) IBF Series

  IMAC

  Pseudo collimated light source capable of long distance irradiation several tens of meters away.[Features]· Usable as a backlight in combination with a telecentric lens.· Parallel light prevents light wraparound, thus optimizing for shape inspections of transparent items and shape/dimension inspection of screws, etc.· Parallel light emission enables illumination tens of meters forward as well.· Can be used for factory indicator lights or situations where the equipment environment prevents lighting from being placed nearby.· Ideal for local irradiation as light does not spread. Light color can be selected from white / red / blue / green / 850 infrared / 400 ultraviolet.[Applications]· Convenient for size and shape inspections of electronic parts and lead frame dimensions.· Ideal for measuring the pitch of connector pins and for edge extraction of substrates and sheets.

  CAD ：

  2D / 3D

  Light Type	Main Body Type	Emitting Color	Irradiation Direction	Light Source	Irradiation Light Type	External Dimension D (Range)(mm)	Width W (Range)(mm)	Length L (Range)(mm)	Power Consumption (Range)(W)	Center Hole Size d (Range)(mm)	Height H (Range)(mm)
  Visible Light	Spot Type	Red / White / Blue / Green	Vertical Illumination / Backlight	Self Emission Type	Parallel Light	30.1~50	40.1~60 / 60.1~80 / 100.1~150	-	-	-	-

  From: 19,055,315 VND
  Days to Ship: Số ngày giao hàng: 18 Day(s) or more

  18 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Slim Lighting Ring VRDFR Series

  SHIMATEC

  Thin, space-saving ring lighting fixture.[Features]· Thin, space-saving design.· Contains both coaxial and oblique lighting components to enable wide-range uniform lighting.· Provides extremely uniform irradiation thanks to its wide light emission area and diffusibility.· Separate supported power supply controller VS-24 series and extension cable required.[Applications]· Convenient for semiconductor electronic parts, circuit board inspection (exterior, alignment), text reading, tablet inspection, plastics, etc.

  CAD ：

  2D

  Light Type	Main Body Type	Emitting Color	Irradiation Direction	Light Source	Irradiation Light Type	External Dimension D (Range)(mm)	Width W (Range)(mm)	Length L (Range)(mm)	Power Consumption (Range)(W)	Center Hole Size d (Range)(mm)	Height H (Range)(mm)
  Visible Light	Ring Type	Red / White / Blue / Green / Yellow	Vertical Illumination	Self Emission Type	Diffused Light	80.1~100 / 130.1~150 / 150.1~200	-	-	1.1~2 ～ 6.1~8	20.1~30 / 40.1~50	5~15

  From: 19,537,322 VND
  Days to Ship: Số ngày giao hàng: 13 Day(s) or more

  13 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Highly Uniform Multi Ring Lighting VRMD Series

  SHIMATEC

  Universal ring lighting which can easily provide the ideal image just by changing the lighting height.[Features]· The original design of the diffusion plate delivers uniform wide-angle illumination.· Dust can be cleaned away easily at any time as the diffusion plate covers the entire light emission section.· The diffusion plate also comes with a protective cover for resistance to external impact, minimizing damage caused during accidents, etc.· Separate supported power supply controller VS-24 series and extension cable required.[Applications]· Ideal for all types of image processing, LCD alignment, and PCB alignment inspections.· Ideal for inspections of chip components, electronic components, and food cup inner surfaces.· Perfect for cleanrooms in semiconductor factories or food processing factories.

  CAD ：

  2D

  Light Type	Main Body Type	Emitting Color	Irradiation Direction	Light Source	Irradiation Light Type	External Dimension D (Range)(mm)	Width W (Range)(mm)	Length L (Range)(mm)	Power Consumption (Range)(W)	Center Hole Size d (Range)(mm)	Height H (Range)(mm)
  Visible Light	Ring Type	Red / White / Blue / Green	Oblique Ray	Self Emission Type	Diffused Light	10~30 / 30.1~50 / 50.1~80 / 80.1~100 / 100.1~130 / 130.1~150 / 150.1~200	-	-	0.1~1 ～ 10.1~20	5~20 / 30.1~40 / 40.1~50 / 50.1~70 / 70.1~100 / 131~200	15.1~20 / 20.1~30 / 30.1~40

  From: 7,810,772 VND
  Days to Ship: Số ngày giao hàng: 13 Day(s) or more

  13 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  High Luminance Multi Ring Lighting VRMD UP Series

  SHIMATEC

  High brightness type universal ring lighting which can easily provide the ideal image just by changing the lighting height.[Features]· Effects of the translucent diffuser plate enable brightness to be concentrated on a smaller area than the standard type.· Dust can be cleaned away easily at any time as the diffusion plate covers the entire light emission section.· The diffusion plate also comes with a protective cover for resistance to external impact, minimizing damage caused during accidents, etc.· Separate supported power supply controller VS-24 series and extension cable required.[Applications]· Ideal for all types of image processing, LCD alignment, and PCB alignment inspections.· Ideal for inspections of chip components, electronic components, and food cup inner surfaces.· Perfect for cleanrooms in semiconductor factories or food processing factories.

  CAD ：

  2D

  Light Type	Main Body Type	Emitting Color	Irradiation Direction	Light Source	Irradiation Light Type	External Dimension D (Range)(mm)	Width W (Range)(mm)	Length L (Range)(mm)	Power Consumption (Range)(W)	Center Hole Size d (Range)(mm)	Height H (Range)(mm)
  Visible Light	Ring Type	Red / White / Blue / Green	Oblique Ray	Self Emission Type	Diffused Light	10~30 / 30.1~50 / 50.1~80 / 80.1~100 / 100.1~130 / 130.1~150 / 150.1~200	-	-	0.1~1 ～ 10.1~20	5~20 / 30.1~40 / 40.1~50 / 50.1~70 / 70.1~100 / 131~200	15.1~20 / 20.1~30 / 30.1~40

  From: 8,072,416 VND
  Days to Ship: Số ngày giao hàng: 13 Day(s) or more

  13 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Highly Uniform Dome Lighting VDSD Series

  SHIMATEC

  Dome lighting with excellent uniformity and brightness.[Features]· Uniform and very high brightness.· In addition to the illumination of the dome, it can irradiate diffused light from the side.· More uniform irradiation is possible through a combination of two types of lights.· The edge direction and the upward direction can be dimmed and lit independently.· Separate supported power supply controller VS-24 series and extension cable required.[Applications]· Ideal for inspection of uneven products and foreign matter inspections of food packages, containers, etc.

  Light Type	Main Body Type	Emitting Color	Irradiation Direction	Light Source	Irradiation Light Type	External Dimension D (Range)(mm)	Width W (Range)(mm)	Length L (Range)(mm)	Power Consumption (Range)(W)	Center Hole Size d (Range)(mm)	Height H (Range)(mm)
  Visible Light	Round Type	Red / White / Blue / Green	Oblique Ray	Self Emission Type	Reflected Light	50.1~80 / 100.1~130 / 150.1~200 / 200~	-	-	4.1~5 ～ 20.1~30	5~20 / 20.1~30 / 30.1~40 / 40.1~50	30.1~40 / 40.1~70 / 70.1~100 / 101~

  From: 18,471,272 VND
  Days to Ship: Số ngày giao hàng: 13 Day(s) or more

  13 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Low Cost Type Surface Emission (for Transmission) Light VDFK Series

  SHIMATEC

  Light-emitting fitting that supports a maximum illuminating surface of 300 x 200 mm.[Features]· Square surface lighting uses an optical guide plate.· Up to 300 x 200 mm light emitting surfaces can be provided at a reasonable cost.· Separate supported power supply controller VS-24 series and extension cable required.[Applications]· Ideal for all types of external inspections and dimensional measurements.· Ideal for permeation of large workpieces.· Can also be used for surface emission reflective lighting in addition to transmissive lighting.

  CAD ：

  2D

  Light Type	Main Body Type	Emitting Color	Irradiation Direction	Light Source	Irradiation Light Type	External Dimension D (Range)(mm)	Width W (Range)(mm)	Length L (Range)(mm)	Power Consumption (Range)(W)	Center Hole Size d (Range)(mm)	Height H (Range)(mm)
  Visible Light	Square Hole Type	Red / White / Blue / Green	Vertical Illumination	Self Emission Type	Surface Emitted Light	-	100.1~150 / 150.1~200 / 200.1~250 / 250.1~	100.1~150 ～ 200.1~250	6.1~8 ～ 20.1~30	-	15.1~20

  From: 17,671,734 VND
  Days to Ship: Số ngày giao hàng: 13 Day(s) or more

  13 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  VXHSL Series Coaxial Vertical Lighting

  SHIMATEC

  Small coaxial illumination equipment with excellent uniformity.[Features]· Light can be reflected off a flat workpiece by irradiation from the same axis as the camera to make the detected object stand out.· The lighting itself is compact but features a wide effective irradiation area.· Separate supported power supply controller VS-24 series and extension cable required.[Applications]· Ideal for all types of image processing, LCD alignment, PCB alignment, glass, metal, and wafer inspections.· Optimal for gloss on metals and glass and for mirror-surfaced workpieces.

  Light Type	Main Body Type	Emitting Color	Irradiation Direction	Light Source	Irradiation Light Type	External Dimension D (Range)(mm)	Width W (Range)(mm)	Length L (Range)(mm)	Power Consumption (Range)(W)	Center Hole Size d (Range)(mm)	Height H (Range)(mm)
  Visible Light	Square Type	Red / White / Blue / Green	Coaxial Vertical	Self Emission Type	Surface Emitted Light	-	60.1~80 / 80.1~100 / 100.1~150	30.1~50 ～ 100.1~150	2.1~3 ～ 20.1~30	-	30.1~40 / 40.1~70 / 70.1~100

  From: 25,400,596 VND
  Days to Ship: Số ngày giao hàng: 13 Day(s) or more

  13 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Direct Lighting Low-Angling DR-LA Series

  NISSIN ELECTRO

  By placing illumination at a low position and lighting from diagonally above, a vivid image with emphasized outlines and edges of workpieces can be obtained. LEDs are arranged in a ring shape that is closer to the vertical, illuminating toward the center.[Applications] Detection of various edges, inspection of engraved/scratched metal surfaces, printed surface contamination/scratch inspection, etc.

  Light Type	Main Body Type	Emitting Color	Irradiation Direction	Light Source	Irradiation Light Type	External Dimension D (Range)(mm)	Width W (Range)(mm)	Length L (Range)(mm)	Power Consumption (Range)(W)	Center Hole Size d (Range)(mm)	Height H (Range)(mm)
  Visible Light	Ring Type	Red / White	Oblique Ray	Self Emission Type	Direct Light	100.1~130 / 130.1~150 / 150.1~200	-	-	8.1~10 ～ 10.1~20	70.1~100 / 101~130 / 131~200	20.1~30

  From: 29,378,038 VND
  Days to Ship: Số ngày giao hàng: 17 Day(s) or more

  17 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Direct Lighting Plane Emission Flat Type TT-S Series

  NISSIN ELECTRO

  Surface emission flat lighting capable of uniform irradiation over a wide range. 4 models are available, from 150 mm square to 300 mm square.Thin design makes it easy to install in any location. It is also useful for replacing dome lighting.

  Light Type	Main Body Type	Emitting Color	Irradiation Direction	Light Source	Irradiation Light Type	External Dimension D (Range)(mm)	Width W (Range)(mm)	Length L (Range)(mm)	Power Consumption (Range)(W)	Center Hole Size d (Range)(mm)	Height H (Range)(mm)
  Visible Light	Square Hole Type	White / Green	Vertical Illumination	Self Emission Type	Surface Emitted Light	-	150.1~200	150.1~200 ～ 200.1~250	50.1~80 ～ 80.1~100	20.1~30	5~15

  From: 74,511,428 VND
  Days to Ship: Số ngày giao hàng: 13 Day(s) or more

  13 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Transparent Lighting Thin-Type Surface Emission Transmissive Type TU Series / TT Series

  NISSIN ELECTRO

  A surface emitting type high-luminosity transmitted illumination that utilizes a high luminosity tip LED as the light emitting element. LED element is mounted directly underneath the illuminating surface.Lighting thickness is a slim 8 mm, but features a uniform light emitting surface.[Applications] Various shape recognition, dimension measurement, foreign matter inspection, liquid level checking, pinhole inspection, sheet material inspection, etc.

  Light Type	Main Body Type	Emitting Color	Irradiation Direction	Light Source	Irradiation Light Type	External Dimension D (Range)(mm)	Width W (Range)(mm)	Length L (Range)(mm)	Power Consumption (Range)(W)	Center Hole Size d (Range)(mm)	Height H (Range)(mm)
  Visible Light	Square Type	White / Blue	Vertical Illumination	Self Emission Type	Surface Emitted Light	-	25.1~40 / 60.1~80 / 80.1~100	30.1~50 ～ 150.1~200	2.1~3 ～ 40.1~50	-	5~15

  From: 8,602,556 VND
  Days to Ship: Số ngày giao hàng: 22 Day(s) or more

  22 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Transparent Lighting Transparent Lighting Line Type TA Series

  NISSIN ELECTRO

  Transmitted illumination line type high-uniformity lighting with high-illuminance LEDs.The size ranges from 100 mm up to 2,000 mm in 100 mm increments.Equipped with white, red and infrared as standard. Ideal for line sensor camera lighting.

  Light Type	Main Body Type	Emitting Color	Irradiation Direction	Light Source	Irradiation Light Type	External Dimension D (Range)(mm)	Width W (Range)(mm)	Length L (Range)(mm)	Power Consumption (Range)(W)	Center Hole Size d (Range)(mm)	Height H (Range)(mm)
  Visible Light	Line Type	Red	Vertical Illumination	Self Emission Type	Direct Light	-	25.1~40	1000.1~1500	30.1~40	-	30.1~40

  From: 54,018,433 VND
  Days to Ship: Số ngày giao hàng: 13 Day(s) or more

  13 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Dome Lighting, Indirect Irradiation Dome Type, KM-H Series

  NISSIN ELECTRO

  An indirect dome lighting fixture that uses high-power LEDs. Dome interior is finished with a high reflection efficiency white coating, and illuminated on the inside.Uniformly illuminates the work surface from all directions with gentle indirect light. Effective imaging of subjects with curved surfaces and uneven surfaces, etc.[Applications] Detecting defects in curved products, surface inspection of metal products, etc., printing inspection of irregular workpieces such as uneven surfaces, etc.

  Light Type	Main Body Type	Emitting Color	Irradiation Direction	Light Source	Irradiation Light Type	External Dimension D (Range)(mm)	Width W (Range)(mm)	Length L (Range)(mm)	Power Consumption (Range)(W)	Center Hole Size d (Range)(mm)	Height H (Range)(mm)
  Visible Light	Round Type	Red	Vertical Illumination	-	Reflected Light	80.1~100	-	-	5.1~6	-	40.1~70

  From: 24,010,418 VND
  Days to Ship: Số ngày giao hàng: 17 Day(s) or more

  17 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  RGB 3Color Light Full 3 Color Type F Series

  NISSIN ELECTRO

  This is the "Full Color LED Lighting Series" equipped with RGB three primary color chip LED elements.Choose from a wide array of tones, from monochromatic luminescence to white. Standard 11-inch type for uniform surface lighting, bar lighting, etc.

  Light Type	Main Body Type	Emitting Color	Irradiation Direction	Light Source	Irradiation Light Type	External Dimension D (Range)(mm)	Width W (Range)(mm)	Length L (Range)(mm)	Power Consumption (Range)(W)	Center Hole Size d (Range)(mm)	Height H (Range)(mm)
  Visible Light	Square Type	Combined Color of Red, Green and Blue	Vertical Illumination	Self Emission Type	Direct Light	-	10~25 / 25.1~40	200.1~250	10.1~20	-	15.1~20

  From: 56,125,876 VND
  Days to Ship: Số ngày giao hàng: 12 Day(s) or more

  12 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Direct Ring Lighting FL-DR Series

  OMRON

  One of the highest luminosities in the industry* / Clear images with wide-field lighting.[Features]· Small yet high-luminosity ODR illumination· Broad range of workpiece distances supported

  CAD ：

  2D / 3D

  Light Type	Main Body Type	Emitting Color	Irradiation Direction	Light Source	Irradiation Light Type	External Dimension D (Range)(mm)	Width W (Range)(mm)	Length L (Range)(mm)	Power Consumption (Range)(W)	Center Hole Size d (Range)(mm)	Height H (Range)(mm)
  Visible Light	Ring Type	White	Oblique Ray	Self Emission Type	Direct Light	-	-	-	8.1~10	-	-

  From: 17,711,030 VND
  Days to Ship: Số ngày giao hàng: 13 Day(s) or more

  13 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Narrow-Angle Light Distribution Coaxial Light IFVA Series

  IMAC

  Narrow-angle light distribution coaxial light that provides high illumination, high uniformity, and a compact housing. [Features]· Because it allows testing using specular reflection, it is effective for inspecting for fine scratches on surfaces or inspections of printing and lettering.· Brightness is at least 3 times that of the IFV series.· The uniformity of the light emitting surface has been improved, enabling uniform lighting even of glossy workpieces that reflect light.· Despite its compact housing, the aperture on the camera side has been widened as much as possible to ensure a wide field of view.

  CAD ：

  2D / 3D

  Light Type	Main Body Type	Emitting Color	Irradiation Direction	Light Source	Irradiation Light Type	External Dimension D (Range)(mm)	Width W (Range)(mm)	Length L (Range)(mm)	Power Consumption (Range)(W)	Center Hole Size d (Range)(mm)	Height H (Range)(mm)
  Visible Light	Square Type	Red / White / Blue	Coaxial Vertical	Self Emission Type	Reflected Light	-	60.1~80 / 80.1~100 / 100.1~150	30.1~50 ～ 80.1~100	10.1~20 ～ 20.1~30	-	40.1~70 / 70.1~100

  From: 20,465,093 VND
  Days to Ship: Số ngày giao hàng: 8 Day(s) or more

  8 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Direct Ring Lighting UDR Series

  U-TECHNOLOGY

  [Features]・ Lighting suitable for inspection of various purposes.・ High luminance can be obtained by direct illumination.・ Lighting that can be easily installed and adjusted by illuminating from the 360° direction. ・ The light quality can be changed by using a diffuser plate and a polarizing plate.[Applications]・ Board inspection.・ Scratch inspection.・ Surface inspection.・ Dirt inspection.

  Light Type	Main Body Type	Emitting Color	Irradiation Direction	Light Source	Irradiation Light Type	External Dimension D (Range)(mm)	Width W (Range)(mm)	Length L (Range)(mm)	Power Consumption (Range)(W)	Center Hole Size d (Range)(mm)	Height H (Range)(mm)
  Visible Light	Ring Type	Blue	Oblique Ray	Self Emission Type	Light Collection	80.1~100	-	-	10.1~20	40.1~50	15.1~20

  From: 32,504,648 VND
  Days to Ship: Số ngày giao hàng: 9 Day(s) or more

  9 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Square Lens Lighting IFHA Series

  IMAC

  Lightweight lens lighting with low profile of 8 mm.[Features]・ Since there is no camera window, there is no light leakage and it is possible to evenly illuminate the entire glossy workpiece・ Sharpness is greatly improved by the special optical design. Printed characters such as barcodes can be captured clearly・ It can be installed in a space smaller than the housing size of only 8 mm・ With a rich lineup of light emitting surfaces of 50 × 50 to 200 × 200 mm, the ideal shape can be selected.・ The brightness is 6 times higher than before, so it can be used with high-speed shutters

  CAD ：

  2D / 3D

  Light Type	Main Body Type	Emitting Color	Irradiation Direction	Light Source	Irradiation Light Type	External Dimension D (Range)(mm)	Width W (Range)(mm)	Length L (Range)(mm)	Power Consumption (Range)(W)	Center Hole Size d (Range)(mm)	Height H (Range)(mm)
  Visible Light	Round Type	Red / White / Blue	Vertical Illumination	Self Emission Type	Surface Emitted Light	-	80.1~100 / 100.1~150 / 150.1~200 / 200.1~250	-	8.1~10 ～ 30.1~40	-	5~15

  From: 30,229,222 VND
  Days to Ship: Số ngày giao hàng: 15 Day(s) or more

  15 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Dome Light (White/Red/Blue) for External Appearance Inspection of Uneven Surfaces, Etc.

  CST

  CST is one of the leading manufacturer of LED lighting for image processing equipment in China. The manufacturer has been providing stable quality products for a long time.

  Light Type	Main Body Type	Emitting Color	Irradiation Direction	Light Source	Irradiation Light Type	External Dimension D (Range)(mm)	Width W (Range)(mm)	Length L (Range)(mm)	Power Consumption (Range)(W)	Center Hole Size d (Range)(mm)	Height H (Range)(mm)
  Visible Light	Round Type	Red / White / Blue	-	-	Diffused Light	-	-	-	-	-	-

  From: 9,619,517 VND
  Days to Ship: Số ngày giao hàng: 20 Day(s) or more

  20 Day(s) or more

BrandNhãn hiệu
Product SeriesDòng sản phẩm
CADCAD
From
Days to ShipSố ngày giao hàng
Light Type
Main Body Type
Emitting Color
Irradiation Direction
Light Source
Irradiation Light Type
External Dimension D (Range)(mm)
Width W (Range)(mm)
Length L (Range)(mm)
Power Consumption (Range)(W)
Center Hole Size d (Range)(mm)
Height H (Range)(mm)

	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare
BrandNhãn hiệu	OPTEX FA	OPTEX FA	OPTEX FA	LVS	MIRUC OPTICAL	MIRUC OPTICAL	MIRUC OPTICAL	MIRUC OPTICAL	MIRUC OPTICAL	OPTEX FA	OPTEX FA	OPTEX FA	IMAC	IMAC	IMAC	IMAC	IMAC	IMAC	IMAC	IMAC	SHIMATEC	SHIMATEC	SHIMATEC	SHIMATEC	SHIMATEC	SHIMATEC	NISSIN ELECTRO	NISSIN ELECTRO	NISSIN ELECTRO	NISSIN ELECTRO	NISSIN ELECTRO	NISSIN ELECTRO	OMRON	IMAC	U-TECHNOLOGY	IMAC	CST
Product SeriesDòng sản phẩm	Flat Direct Ring Lighting OPDR-F Series	Sensing Bar Lighting OPB-S Series	Direct Bar Lighting	Surface Illumination Dome Type Light without Shade IDM/IDM3/IDM4 Series	White LED lighting device	White spot LED lighting device	Bifurcated fiber lighting device	White LED lighting device (separated type)	White LED lighting equipment ML-TV3 (for coaxial epi‐illumination)	Sensing Ring Lighting (with Built-In Temperature Protection Circuit) OPR-SF Series	Edge Type Backlight OPEM-H/OPEM Series	Full Color Lighting RGB Series	Low Angle Ring Light (Direct Light) IDR-LA Series	Horizontal Opposed Ring Light (Direct Light) IDRA-T Series	High Luminance B'C Line Lighting (1 Row Specification, Direct Light, Wide Angle/Narrow Angle) IDBA-LEH Series	Bar Lighting (Direct Light / Diffused Light) IDBA Series	Square Edgelight Illuminator (Surface Emitting, Thin Type) IFLA/IFL Series	Square Surface Lighting (Indirect Light) IPQC Series	Coaxial Vertical Pseudo Lighting IFV Series	Collimate Light (Pseudo Collimated Light) IBF Series	Slim Lighting Ring VRDFR Series	Highly Uniform Multi Ring Lighting VRMD Series	High Luminance Multi Ring Lighting VRMD UP Series	Highly Uniform Dome Lighting VDSD Series	Low Cost Type Surface Emission (for Transmission) Light VDFK Series	VXHSL Series Coaxial Vertical Lighting	Direct Lighting Low-Angling DR-LA Series	Direct Lighting Plane Emission Flat Type TT-S Series	Transparent Lighting Thin-Type Surface Emission Transmissive Type TU Series / TT Series	Transparent Lighting Transparent Lighting Line Type TA Series	Dome Lighting, Indirect Irradiation Dome Type, KM-H Series	RGB 3Color Light Full 3 Color Type F Series	Direct Ring Lighting FL-DR Series	Narrow-Angle Light Distribution Coaxial Light IFVA Series	Direct Ring Lighting UDR Series	Square Lens Lighting IFHA Series	Dome Light (White/Red/Blue) for External Appearance Inspection of Uneven Surfaces, Etc.
CADCAD	2D	2D / 3D	2D	3D	2D					2D / 3D	2D	2D	2D / 3D	2D / 3D	2D	2D / 3D	2D / 3D	2D / 3D	2D / 3D	2D / 3D	2D	2D	2D		2D								2D / 3D	2D / 3D		2D / 3D
From	6,945,184 VND	9,464,965 VND	4,407,305 VND	14,870,410 VND	10,119,941 VND	21,022,323 VND	34,368,484 VND	12,047,550 VND	21,022,323 VND	9,419,130 VND	7,768,849 VND	27,566,314 VND	6,222,588 VND	14,035,313 VND	11,261,210 VND	4,269,271 VND	6,779,271 VND	22,121,996 VND	12,919,756 VND	19,055,315 VND	19,537,322 VND	7,810,772 VND	8,072,416 VND	18,471,272 VND	17,671,734 VND	25,400,596 VND	29,378,038 VND	74,511,428 VND	8,602,556 VND	54,018,433 VND	24,010,418 VND	56,125,876 VND	17,711,030 VND	20,465,093 VND	32,504,648 VND	30,229,222 VND	9,619,517 VND
Days to ShipSố ngày giao hàng	22 Day(s) or more	8 Day(s) or more	22 Day(s) or more	11 Day(s)	6 Day(s) or more	6 Day(s) or more	6 Day(s) or more	6 Day(s) or more	21 Day(s) or more	8 Day(s) or more	24 Day(s) or more	24 Day(s) or more	8 Day(s) or more	13 Day(s) or more	18 Day(s) or more	13 Day(s) or more	8 Day(s) or more	8 Day(s) or more	13 Day(s) or more	18 Day(s) or more	13 Day(s) or more	13 Day(s) or more	13 Day(s) or more	13 Day(s) or more	13 Day(s) or more	13 Day(s) or more	17 Day(s) or more	13 Day(s) or more	22 Day(s) or more	13 Day(s) or more	17 Day(s) or more	12 Day(s) or more	13 Day(s) or more	8 Day(s) or more	9 Day(s) or more	15 Day(s) or more	20 Day(s) or more
Light Type	Visible Light	Visible Light	Visible Light	Visible Light	Visible Light	Visible Light	Visible Light	Visible Light	Visible Light	Visible Light	Visible Light	Visible Light	Visible Light	Visible Light	Visible Light	Visible Light	Visible Light	Visible Light	Visible Light	Visible Light	Visible Light	Visible Light	Visible Light	Visible Light	Visible Light	Visible Light	Visible Light	Visible Light	Visible Light	Visible Light	Visible Light	Visible Light	Visible Light	Visible Light	Visible Light	Visible Light	Visible Light
Main Body Type	Ring Type	Bar Type	Bar Type	Round Type	Bar Type	Spot Type	Spot Type	Ring Type	Spot Type	Ring Type	Square Type	Square Type	Ring Type	Ring Type	Bar Type	Bar Type	Square Type	Square Hole Type	Square Type	Spot Type	Ring Type	Ring Type	Ring Type	Round Type	Square Hole Type	Square Type	Ring Type	Square Hole Type	Square Type	Line Type	Round Type	Square Type	Ring Type	Square Type	Ring Type	Round Type	Round Type
Emitting Color	Red / White / Blue	White	Red / White / Blue	Red / White / Blue / Green	White	White	White	White	White	White	White	Combined Color of Red, Green and Blue	Red / White / Blue / Green	Red / White / Blue / Green	White	Red / White / Blue / Green	Red / White / Blue	Red / White / Blue	Red / White / Blue / Green	Red / White / Blue / Green	Red / White / Blue / Green / Yellow	Red / White / Blue / Green	Red / White / Blue / Green	Red / White / Blue / Green	Red / White / Blue / Green	Red / White / Blue / Green	Red / White	White / Green	White / Blue	Red	Red	Combined Color of Red, Green and Blue	White	Red / White / Blue	Blue	Red / White / Blue	Red / White / Blue
Irradiation Direction	Vertical Illumination	Oblique Ray	Vertical Illumination / Oblique Ray / Backlight	-	Vertical Illumination	Vertical Illumination	Vertical Illumination	Vertical Illumination	Vertical Illumination	Vertical Illumination	Backlight	Backlight	Oblique Ray	Oblique Ray	Vertical Illumination	Vertical Illumination	Backlight	Oblique Ray	Coaxial Vertical	Vertical Illumination / Backlight	Vertical Illumination	Oblique Ray	Oblique Ray	Oblique Ray	Vertical Illumination	Coaxial Vertical	Oblique Ray	Vertical Illumination	Vertical Illumination	Vertical Illumination	Vertical Illumination	Vertical Illumination	Oblique Ray	Coaxial Vertical	Oblique Ray	Vertical Illumination	-
Light Source	Self Emission Type	Self Emission Type	Self Emission Type	-	Fiber Head	Fiber Head	Fiber Head	Self Emission Type	Fiber Head	Self Emission Type	Self Emission Type	Self Emission Type	Self Emission Type	Self Emission Type	Self Emission Type	Self Emission Type	Self Emission Type	Self Emission Type	Self Emission Type	Self Emission Type	Self Emission Type	Self Emission Type	Self Emission Type	Self Emission Type	Self Emission Type	Self Emission Type	Self Emission Type	Self Emission Type	Self Emission Type	Self Emission Type	-	Self Emission Type	Self Emission Type	Self Emission Type	Self Emission Type	Self Emission Type	-
Irradiation Light Type	Direct Light	Direct Light	Direct Light	Surface Emitted Light	Direct Light	Direct Light	Direct Light	Diffused Light	Direct Light	Direct Light	Surface Emitted Light	Surface Emitted Light	Direct Light	Direct Light	Direct Light	Direct Light	Surface Emitted Light	Diffused Light	Surface Emitted Light	Parallel Light	Diffused Light	Diffused Light	Diffused Light	Reflected Light	Surface Emitted Light	Surface Emitted Light	Direct Light	Surface Emitted Light	Surface Emitted Light	Direct Light	Reflected Light	Direct Light	Direct Light	Reflected Light	Light Collection	Surface Emitted Light	Diffused Light
External Dimension D (Range)(mm)	30.1~50 / 50.1~80 / 80.1~100 / 100.1~130	-	-	30.1~50 / 50.1~80 / 80.1~100 / 130.1~150	-	-	-	-	-	30.1~50 / 50.1~80 / 80.1~100	-	-	30.1~50 / 50.1~80 / 80.1~100 / 100.1~130 / 130.1~150 / 150.1~200	50.1~80 / 80.1~100 / 100.1~130 / 150.1~200	-	-	-	-	-	30.1~50	80.1~100 / 130.1~150 / 150.1~200	10~30 / 30.1~50 / 50.1~80 / 80.1~100 / 100.1~130 / 130.1~150 / 150.1~200	10~30 / 30.1~50 / 50.1~80 / 80.1~100 / 100.1~130 / 130.1~150 / 150.1~200	50.1~80 / 100.1~130 / 150.1~200 / 200~	-	-	100.1~130 / 130.1~150 / 150.1~200	-	-	-	80.1~100	-	-	-	80.1~100	-	-
Width W (Range)(mm)	-	40.1~60 / 100.1~150 / 150.1~200 / 200.1~250 / 250.1~	25.1~40	-	-	-	-	-	-	-	25.1~40 / 40.1~60	60.1~80	-	-	80.1~100	25.1~40 / 40.1~60 / 60.1~80 / 80.1~100 / 100.1~150 / 200.1~250 / 250.1~	25.1~40 / 40.1~60 / 80.1~100	25.1~40 / 40.1~60 / 60.1~80 / 80.1~100	40.1~60 / 60.1~80 / 80.1~100 / 100.1~150	40.1~60 / 60.1~80 / 100.1~150	-	-	-	-	100.1~150 / 150.1~200 / 200.1~250 / 250.1~	60.1~80 / 80.1~100 / 100.1~150	-	150.1~200	25.1~40 / 60.1~80 / 80.1~100	25.1~40	-	10~25 / 25.1~40	-	60.1~80 / 80.1~100 / 100.1~150	-	80.1~100 / 100.1~150 / 150.1~200 / 200.1~250	-
Length L (Range)(mm)	-	10~30	10~30	-	-	-	-	-	-	-	30.1~50 ～ 50.1~80	50.1~80	-	-	30.1~50	10~30 ～ 100.1~150	30.1~50 ～ 50.1~80	30.1~50 ～ 80.1~100	10~30 ～ 80.1~100	-	-	-	-	-	100.1~150 ～ 200.1~250	30.1~50 ～ 100.1~150	-	150.1~200 ～ 200.1~250	30.1~50 ～ 150.1~200	1000.1~1500	-	200.1~250	-	30.1~50 ～ 80.1~100	-	-	-
Power Consumption (Range)(W)	1.1~2 ～ 8.1~10	3.1~4 ～ 10.1~20	0.1~1	0.1~1 ～ 10.1~20	-	-	-	-	-	8.1~10 ～ 20.1~30	0.1~1 ～ 1.1~2	6.1~8	2.1~3 ～ 10.1~20	2.1~3 ～ 5.1~6	6.1~8	0.1~1 ～ 20.1~30	0.1~1 ～ 2.1~3	4.1~5 ～ 10.1~20	0.1~1 ～ 10.1~20	-	1.1~2 ～ 6.1~8	0.1~1 ～ 10.1~20	0.1~1 ～ 10.1~20	4.1~5 ～ 20.1~30	6.1~8 ～ 20.1~30	2.1~3 ～ 20.1~30	8.1~10 ～ 10.1~20	50.1~80 ～ 80.1~100	2.1~3 ～ 40.1~50	30.1~40	5.1~6	10.1~20	8.1~10	10.1~20 ～ 20.1~30	10.1~20	8.1~10 ～ 30.1~40	-
Center Hole Size d (Range)(mm)	5~20 / 30.1~40 / 40.1~50 / 50.1~70	-	-	5~20 / 20.1~30 / 30.1~40	-	-	-	5~20	-	5~20 / 20.1~30 / 40.1~50 / 50.1~70	-	-	5~20 / 20.1~30 / 40.1~50 / 50.1~70 / 101~130 / 131~200	40.1~50 / 50.1~70 / 70.1~100 / 101~130	-	-	-	-	-	-	20.1~30 / 40.1~50	5~20 / 30.1~40 / 40.1~50 / 50.1~70 / 70.1~100 / 131~200	5~20 / 30.1~40 / 40.1~50 / 50.1~70 / 70.1~100 / 131~200	5~20 / 20.1~30 / 30.1~40 / 40.1~50	-	-	70.1~100 / 101~130 / 131~200	20.1~30	-	-	-	-	-	-	40.1~50	-	-
Height H (Range)(mm)	15.1~20 / 20.1~30	20.1~30	20.1~30	30.1~40 / 40.1~70 / 70.1~100	-	-	-	-	-	15.1~20	5~15	5~15	15.1~20 / 20.1~30	5~15	30.1~40	5~15 / 20.1~30 / 30.1~40	5~15	20.1~30	15.1~20 / 20.1~30 / 30.1~40 / 40.1~70 / 70.1~100	-	5~15	15.1~20 / 20.1~30 / 30.1~40	15.1~20 / 20.1~30 / 30.1~40	30.1~40 / 40.1~70 / 70.1~100 / 101~	15.1~20	30.1~40 / 40.1~70 / 70.1~100	20.1~30	5~15	5~15	30.1~40	40.1~70	15.1~20	-	40.1~70 / 70.1~100	15.1~20	5~15	-

Loading...Tải…