Other Linear Motion Related Components

• You can add up to 6 items per a category to the compare list. Compare

  

  

  

  

  

  

  Lubrication Accessory Parts Grease Fitting

  THK

  Various grease fittings required for lubrication of each THK product. This is a grease fitting for lubrication with the linear motion system.

  CAD ：

  2D / 3D

  From: 21,860 VND
  Days to Ship: Số ngày giao hàng: Same day or more

  Same day or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Flat Roller FT Type

  THK

  [Features]·The flat roller is made by press-molding a steel plate into an M shape to increase rigidity and reduce weight.·The rollers are held in cage pockets and have a structure that prevents them from falling off.·In addition, since the cage with rollers with a roller diameter of 5 mm or more has a roller support, smooth motion can be obtained without damaging the raceway surface even if the hardness of the raceway surface is low.·These flat rollers are sandwiched between the two rolling surfaces, so as the table moves, they move in the same direction by 1/2 of the table's travel distance.· [Large load capacity]Since the rollers are installed with a small pitch, the allowable load is large, and depending on the conditions, it can be used even on the rolling surfaces of castings that have not been quench-hardened. Also, the deflection stiffness of the table is almost the same as that of the sliding surface.· [Standardized combination accuracy for 90° V face and plane]It is standardized so that it can be mounted on the most common 90° V-flat sliding surface of the table and saddle narrow guide system of various machines, so it can be used without major design changes.· [Lowest friction among roller-type linear motion systems]Since the rollers are held in alignment by a lightweight and rigid cage, there is no mutual friction between the rollers and the skew of the rollers is suppressed. As a result, the coefficient of friction is as small as µ = 0.001 to 0.0025, and stick-slip, which is a problem on sliding surfaces, does not occur.· [One-touch cage connection]When incorporating into a large machine, the flat roller can be easily connected on the bed, making assembly easy no matter how long it is.·The rollers are single-rowed and are mainly used on flat surfaces.[Applications]·Flat rollers are ideal for large machine tools such as planers, plano millers, and roll ...

  CAD ：

  2D / 3D

  From: 104,061 VND
  Days to Ship: Số ngày giao hàng: 4 Day(s) or more

  4 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  LM Roller, LR Model and LR-Z Model

  THK

  [Type and features]· The mounting surface of LR type is grooved for pressing in· LR-Z Lightweight type using a plastic retainer with the same mounting method as the LR type. Excellent abrasion resistance from the seal mounting groove, easy installation of special rubber seal with high dust resistance.

  CAD ：

  2D / 3D

  From: 1,279,181 VND
  Days to Ship: Số ngày giao hàng: 10 Day(s) or more

  10 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Grease Gun Unit MG70

  THK

  Possible to lubricate small to large LM guides by changing the dedicated attached nozzles.[Features]· MG70 grease gun unit to lubricate small to large model numbers of LM guide by replacing the dedicated nozzle (attached).· A dedicated attachment for small LM guides is provided to select the attachment by model number or space for lubrication.· The grease gun has a slit window for easy verification of the remaining amount of grease.· 70 g of grease can be filled with the bellows cartridge system, without getting your hands dirty.· Please select AFA, AFB-LF, AFC and AFE-CAgrease according to intended usage.

  From: 2,278,755 VND
  Days to Ship: Số ngày giao hàng: Same day

  Same day

• You can add up to 6 items per a category to the compare list. Compare

  

  LM roller LRB/LRB-Z type

  THK

  The LM Roller has a pin-shaped roller built into the outer circumference of a precision-ground rigid raceway base, which is held by a retainer and performs infinite circulating motion.[Features]·The LRB type does not require grooving on the mounting surface, reducing the number of processing steps. Mounting brackets SMB type and SE type can be used and fixed with bolts.·The LRB-Z type uses a resin retainer to reduce weight, and the mounting method is the same as the LRB type. In addition, since a seal mounting groove is provided, a special rubber seal with excellent wear resistance and high dust resistance can be easily mounted. Furthermore, high-speed travel of 1 m/s is possible.

  CAD ：

  2D / 3D

  From: 5,172,072 VND
  Days to Ship: Số ngày giao hàng: 23 Day(s) or more

  23 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Mounting bracket for LM roller, SE type, SEB type

  THK

  [Type and features]· SE type mounting brackets eliminate the need for thin tap processing for installing and securing LM rollers· SEB model has a special inlaid double lip rubber wiper for a high dust proofing effect.

  From: 497,546 VND
  Days to Ship: Số ngày giao hàng: 8 Day(s) or more

  8 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Precision Linear Pack ER Type

  THK

  Reduced design and assembly costs, long-term stability, lightweight · Compact · Excellent responsiveness at high speeds.[Features]· The ER model is a slide unit that is grind finished after heat treatment with precision molded stainless steel plates· The ball rolling motion and sliding structure between the outer rail and the inner V groove where the ball moves in the internal case in this extremely thin and lightweight unit to perform infinite linear motion.· Widely used for magnetic disk devices, electronic devices, semiconductor manufacturing devices, medical devices, measuring devices, plotter devices, and copying machines, etc.· [Reduced design and assembly costs] Design cost and assembly times can be reduced, and highly accurate linear guidance can be achieved compared to conventional miniature ball bearings used for precision instruments.· [Long term stability] Stable performance is obtained for long time periods with the ball circulation type slide unit due to the extremely small coefficient of friction.· [Lightweight, compact, high speed response] The outer and inner are composed of minimum thickness stainless steel plates.· The light weight allows lower moment of inertia and demonstrates excellent high speed responsiveness

  CAD ：

  2D / 3D

  From: 1,021,751 VND
  Days to Ship: Số ngày giao hàng: 4 Day(s) or more

  4 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  LM Roller LRA Model, LRA-Z Model

  THK

  [Features]· The LM roller incorporates a punch roller in the track rail outer circumference which has been precisely machined for rigidity to perform endless circulation secured by the retainer.· A central guide is integrated in the central load bearing region of the track base, and the unique structure constantly corrects the skew of the roller, for a smooth motion.· Used in the XYZ guide components, precision press ram guides, press mold exchange apparatus, various heavy load conveying devices, etc. of various NC machine tools.

  CAD ：

  2D / 3D

  From: 1,278,525 VND
  Days to Ship: Số ngày giao hàng: 8 Day(s) or more

  8 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Flat Roller FTW Type

  THK

  CAD ：

  2D / 3D

  From: 1,517,233 VND
  Days to Ship: Số ngày giao hàng: 35 Day(s) or more

  35 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Mount bracket for LM roller SM type, SMB type

  THK

  [Features]· The SM and SE type mounting brackets eliminate the need for thin taps for installing and securing LM rollers.· The SE and SEB models have a special inlaid double lip rubber wiper for a high dustproofing effect

  From: 592,696 VND
  Days to Ship: Số ngày giao hàng: 8 Day(s) or more

  8 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Spring part PA type for LM roller

  THK

  [Features]· Set to install the spring pad mounted on the back of the LM roller.· The clearance and preload can be easily adjusted by tightening the bolt

  CAD ：

  2D / 3D

  From: 179,445 VND
  Days to Ship: Số ngày giao hàng: 13 Day(s) or more

  13 Day(s) or more

BrandNhãn hiệu
Product SeriesDòng sản phẩm
CADCAD
From
Days to ShipSố ngày giao hàng

	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare
BrandNhãn hiệu	THK	THK	THK	THK	THK	THK	THK	THK	THK	THK	THK
Product SeriesDòng sản phẩm	Lubrication Accessory Parts Grease Fitting	Flat Roller FT Type	LM Roller, LR Model and LR-Z Model	Grease Gun Unit MG70	LM roller LRB/LRB-Z type	Mounting bracket for LM roller, SE type, SEB type	Precision Linear Pack ER Type	LM Roller LRA Model, LRA-Z Model	Flat Roller FTW Type	Mount bracket for LM roller SM type, SMB type	Spring part PA type for LM roller
CADCAD	2D / 3D	2D / 3D	2D / 3D		2D / 3D		2D / 3D	2D / 3D	2D / 3D		2D / 3D
From	21,860 VND	104,061 VND	1,279,181 VND	2,278,755 VND	5,172,072 VND	497,546 VND	1,021,751 VND	1,278,525 VND	1,517,233 VND	592,696 VND	179,445 VND
Days to ShipSố ngày giao hàng	Same day or more	4 Day(s) or more	10 Day(s) or more	Same day	23 Day(s) or more	8 Day(s) or more	4 Day(s) or more	8 Day(s) or more	35 Day(s) or more	8 Day(s) or more	13 Day(s) or more

Loading...Tải…