WAGO Interface Terminal Blocks (Round/Y Terminal Types)

• You can add up to 6 items per a category to the compare list. Compare

  

  IM Series IM-M/IMF MIL/FCN Connector Terminal Block for Control Panels

  WAGO

  A module that converts an FCN connector into a terminal block.[Features]·Converts the half-pitch MDR connector used as standard in servo amplifiers to a terminal block.·Simple one-to-one circuit. Wide cable connection range from 0.08 to 1.5 or 2.5 mm2.·Connector is MIL, FCN (AMP)··Industry standard.·3.5 mm pitch and 5 mm pitch terminal blocks··Wide lineup.·KEYENCE PLC CPU "-KV" is also available··Lineup added.·Features a cage clamp connection that is strong against vibration··Improved reliability.[Applications]·Ideal for when soldering work is difficult and troublesome for connecting the FCN connector and electric cable.·Ideal for prototyping and experimental applications when you want to convert the input/output signals of KEYENCE PLC to a terminal block.

  Connector	Number of Poles(Pole)	Mounting Method	Supported equipment manufacturer	Pitch Between Terminals(mm)	Supported equipment	Dimension width(mm)	Terminal Block Screw	Representative Standard	Dimension vertical(mm)	Dimension depth(mm)
  MIL Connector / FCN Connector	20 ～ 50	With DIN rail	KEYENCE	3.5 ～ 5	PLC	52 ～ 132	-	-	22.6 ～ 38.3	55

  From: 864,779 VND
  Days to Ship: Số ngày giao hàng: Same day or more

  Same day or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Connector Terminal Block for Control Panels, PM-32 Series

  WAGO

  [Features]● Proven results. A best selling connector terminal block.● For smaller control panels. An ultra-small connector terminal block with a horizontal width of just 77 mm.● For reducing mis-wiring. Even if the PLC changes, the signal and common terminal block placement remain the same. The signal and common terminal blocks are colored for easier differentiation.● For reducing the amount of wiring required. With common terminal blocks, power can be passed horizontally to adjacent poles.● Improved reliability. Uses a cage clamp mechanism so as to prevent wires from becoming loose.● For using fewer parts. No stopper required for aluminum DIN rails

  Connector	Number of Poles(Pole)	Mounting Method	Supported equipment manufacturer	Pitch Between Terminals(mm)	Supported equipment	Dimension width(mm)	Terminal Block Screw	Representative Standard	Dimension vertical(mm)	Dimension depth(mm)
  MIL Connector	32	With DIN rail	Mitsubishi Electric / Omron / KEYENCE	3.5	PLC	42	-	-	48.5	85

  From: 1,277,890 VND
  Days to Ship: Số ngày giao hàng: 4 Day(s) or more

  4 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Wire Distribution I/O Direct Connection Connector Terminal Block for FANUC Control

  WAGO

  [Features]● No harness required. Direct coupling with FANUC distribution type I/O (-FN2, -FN)● Increased wiring efficiency. Power can be passed horizontally (-FN2).● A space saving design. Slim horizontal width & common (-FN2).● Ideal for when adding units or making changes. No need to develop a specialized circuit board (-FN2 and -FN).● Simple to use. 1-to-1 circuit

  Connector	Number of Poles(Pole)	Mounting Method	Supported equipment manufacturer	Pitch Between Terminals(mm)	Supported equipment	Dimension width(mm)	Terminal Block Screw	Representative Standard	Dimension vertical(mm)	Dimension depth(mm)
  Other	-	Direct attachment	-	3.5	-	31.5	-	-	27.3	144

  From: 2,613,813 VND
  Days to Ship: Số ngày giao hàng: 6 Day(s) or more

  6 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  FANUC Operation Board I/O Connector Terminal Block for FANUC Control

  WAGO

  [Features]● Pins no. 47 to 50 are common. Ideal for FANUC operations board I/O.● Increased wiring efficiency. Power supply horizontal pass is possible● Space saving. 50 pole 3.5 mm terminal block.● A size that allows for it to be inserted even into tight spaces. Designed so as not to be too tall.

  Connector	Number of Poles(Pole)	Mounting Method	Supported equipment manufacturer	Pitch Between Terminals(mm)	Supported equipment	Dimension width(mm)	Terminal Block Screw	Representative Standard	Dimension vertical(mm)	Dimension depth(mm)
  MIL Connector	50	Direct attachment	-	3.5	-	95	-	-	41.6	55

  From: 1,976,853 VND
  Days to Ship: Số ngày giao hàng: 6 Day(s) or more

  6 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Connector Terminal Block For Control Panels, PM-32 Series, Ultra Compact Type

  WAGO

  [Features]● Proven results. A best selling connector terminal block.● For smaller control panels. An ultra-small connector terminal block with a horizontal width of just 77 mm.● For reducing mis-wiring. Even if the PLC changes, the signal and common terminal block placement remain the same. The signal and common terminal blocks are colored for easier differentiation.● For reducing the amount of wiring required. With common terminal blocks, power can be passed horizontally to adjacent poles.● Improved reliability. Uses a cage clamp mechanism so as to prevent wires from becoming loose.● For using fewer parts. No stopper required for aluminum DIN rails

  Connector	Number of Poles(Pole)	Mounting Method	Supported equipment manufacturer	Pitch Between Terminals(mm)	Supported equipment	Dimension width(mm)	Terminal Block Screw	Representative Standard	Dimension vertical(mm)	Dimension depth(mm)
  MIL Connector	32	With DIN rail	Mitsubishi Electric / Omron / KEYENCE	3.5	PLC	77	-	-	41.3	55

  From: 1,198,415 VND
  Days to Ship: Số ngày giao hàng: 6 Day(s) or more

  6 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  IM-MDR Half Pitch MDR Connector Terminal Block for Control Panels

  WAGO

  [Features]● Simple to use. 1-to-1 circuit● An ultra small type. A 3.5 mm pitch terminal block.● Industry standard. An MDR connector used as standard in servo amplifiers.● Ideal for shield processing and EMC audits, etc. Equipped with a shield terminal block.

  Connector	Number of Poles(Pole)	Mounting Method	Supported equipment manufacturer	Pitch Between Terminals(mm)	Supported equipment	Dimension width(mm)	Terminal Block Screw	Representative Standard	Dimension vertical(mm)	Dimension depth(mm)
  MDR connector	20 ～ 50	With DIN rail	-	3.5	-	46 ～ 100	-	-	31.1	55

  From: 1,001,728 VND
  Days to Ship: Số ngày giao hàng: 4 Day(s) or more

  4 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Wire Distribution I/O Direct Connection Connector Terminal Block for FANUC Control (Connected Terminal Block)

  WAGO

  [Features]● Simple connection. Push-in type wire connection.● No harness required. Direct coupling with FANUC distribution type I/O.● Increased wiring efficiency. Power supply horizontal pass is possible● Space saving. Slim horizontal width & common● Shorter on-site wire connection work. Quick connect terminal block● Ideal for when adding units or making changes. No need to develop a specialized circuit board.

  Connector	Number of Poles(Pole)	Mounting Method	Supported equipment manufacturer	Pitch Between Terminals(mm)	Supported equipment	Dimension width(mm)	Terminal Block Screw	Representative Standard	Dimension vertical(mm)	Dimension depth(mm)
  Other	-	Direct attachment	-	5	-	31.5	-	-	32	151

  From: 2,085,221 VND
  Days to Ship: Số ngày giao hàng: 6 Day(s) or more

  6 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  PM-601 Series (Sensor / Actuator Station)

  WAGO

  [Features]● Direct coupling to PLC via straight connection cables.● Even if the PLC changes, the signal and common terminal block placement remain the same.● An ultra small connector terminal block with a horizontal width of 95/77 mm.● A 739 cage clamp terminal block with a pitch of 3.5 mm.● Boasts a wire connection range of 0.08 to 1.5 mm2. Even ultra thin sensor wire can be connected directly.● The signal and common terminal blocks are colored to make them easier to differentiate.● With common power supply terminal blocks, power can be passed horizontally with adjacent connector terminal blocks.● The circuit aligns with the PLC pin layout for products from various manufacturers.● The terminal block features an IP20 finger protection structure.● No stopper required for aluminum DIN rails.

  Connector	Number of Poles(Pole)	Mounting Method	Supported equipment manufacturer	Pitch Between Terminals(mm)	Supported equipment	Dimension width(mm)	Terminal Block Screw	Representative Standard	Dimension vertical(mm)	Dimension depth(mm)
  MIL Connector	16	With DIN rail	Mitsubishi Electric / Omron / KEYENCE	3.5	PLC	95	-	-	41.3	55

  From: 1,398,676 VND
  Days to Ship: Số ngày giao hàng: 6 Day(s) or more

  6 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  IM-DSF Dsub Female Connector Terminal Block for Control Panels

  WAGO

  [Features]● Simple to use. 1-to-1 circuit● A wide range of wire connections. A 5 mm pitch terminal block.● Industry standard. An international standard Dsub connector.● For large current applications. Convenient for 3 A energizing● Ideal for EMC audits, etc. Equipped with a shield terminal block.

  Connector	Number of Poles(Pole)	Mounting Method	Supported equipment manufacturer	Pitch Between Terminals(mm)	Supported equipment	Dimension width(mm)	Terminal Block Screw	Representative Standard	Dimension vertical(mm)	Dimension depth(mm)
  D-sub connector	15 ～ 37	With DIN rail	-	5	-	48 ～ 102	-	-	27.1	55

  From: 1,407,921 VND
  Days to Ship: Số ngày giao hàng: 4 Day(s) or more

  4 Day(s) or more

BrandNhãn hiệu
Product SeriesDòng sản phẩm
From
Days to ShipSố ngày giao hàng
Connector
Number of Poles(Pole)
Mounting Method
Supported equipment manufacturer
Pitch Between Terminals(mm)
Supported equipment
Dimension width(mm)
Terminal Block Screw
Representative Standard
Dimension vertical(mm)
Dimension depth(mm)

	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare
BrandNhãn hiệu	WAGO	WAGO	WAGO	WAGO	WAGO	WAGO	WAGO	WAGO	WAGO
Product SeriesDòng sản phẩm	IM Series IM-M/IMF MIL/FCN Connector Terminal Block for Control Panels	Connector Terminal Block for Control Panels, PM-32 Series	Wire Distribution I/O Direct Connection Connector Terminal Block for FANUC Control	FANUC Operation Board I/O Connector Terminal Block for FANUC Control	Connector Terminal Block For Control Panels, PM-32 Series, Ultra Compact Type	IM-MDR Half Pitch MDR Connector Terminal Block for Control Panels	Wire Distribution I/O Direct Connection Connector Terminal Block for FANUC Control (Connected Terminal Block)	PM-601 Series (Sensor / Actuator Station)	IM-DSF Dsub Female Connector Terminal Block for Control Panels
From	864,779 VND-	1,277,890 VND-	2,613,813 VND	1,976,853 VND	1,198,415 VND-	1,001,728 VND-	2,085,221 VND	1,398,676 VND-	1,407,921 VND-
Days to ShipSố ngày giao hàng	Same day or more	4 Day(s) or more	6 Day(s) or more	6 Day(s) or more	6 Day(s) or more	4 Day(s) or more	6 Day(s) or more	6 Day(s) or more	4 Day(s) or more
Connector	MIL Connector / FCN Connector	MIL Connector	Other	MIL Connector	MIL Connector	MDR connector	Other	MIL Connector	D-sub connector
Number of Poles(Pole)	20 ～ 50	32	-	50	32	20 ～ 50	-	16	15 ～ 37
Mounting Method	With DIN rail	With DIN rail	Direct attachment	Direct attachment	With DIN rail	With DIN rail	Direct attachment	With DIN rail	With DIN rail
Supported equipment manufacturer	KEYENCE	Mitsubishi Electric / Omron / KEYENCE	-	-	Mitsubishi Electric / Omron / KEYENCE	-	-	Mitsubishi Electric / Omron / KEYENCE	-
Pitch Between Terminals(mm)	3.5 ～ 5	3.5	3.5	3.5	3.5	3.5	5	3.5	5
Supported equipment	PLC	PLC	-	-	PLC	-	-	PLC	-
Dimension width(mm)	52 ～ 132	42	31.5	95	77	46 ～ 100	31.5	95	48 ～ 102
Terminal Block Screw	-	-	-	-	-	-	-	-	-
Representative Standard	-	-	-	-	-	-	-	-	-
Dimension vertical(mm)	22.6 ～ 38.3	48.5	27.3	41.6	41.3	31.1	32	41.3	27.1
Dimension depth(mm)	55	85	144	55	55	55	151	55	55

Loading...Tải…