SUMITOMO ELECTRIC HARDMETAL Inserts (for Milling)（work material：Cast Iron）

• You can add up to 6 items per a category to the compare list. Compare

  

  Used for SEC-Wave Mill AXMT-PEER-G

  SUMITOMO ELECTRIC HARDMETAL

  Adopts a curved edge to improve cutting edge strength and reduce cutting force. The high-precision cutting edge realizes a high-quality machined surface that approaches the finishing area.

  Shape (initial letter of model number)	work material	Clearance angle	Available corners	Data for CAM / Tool Management Software
  A (85° parallelogram)	Cast Iron	P (11°)	-	-

  From: 174,883 VND
  Days to Ship: Số ngày giao hàng: 6 Day(s) or more

  6 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Blade Tip Replacement Tip APMT-PDER

  SUMITOMO ELECTRIC HARDMETAL

  Offers both cutting performance and cutting edge strength. Achieves a reduced cutting -chip discharge amount with a lower required power by reducing cutting force.

  Shape (initial letter of model number)	work material	Clearance angle	Available corners	Data for CAM / Tool Management Software
  A (85° parallelogram)	Cast Iron	P (11°)	-	-

  From: 234,478 VND
  Days to Ship: Số ngày giao hàng: 6 Day(s) or more

  6 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Used for SEC-Wave Mill, WGC Model SEET13T3AG□N-□

  SUMITOMO ELECTRIC HARDMETAL

  Manufactured by Sumitomo Electric Hardmetal.The optimized shape and tough material provide both cutting performance and strength at a high level.

  Shape (initial letter of model number)	work material	Clearance angle	Available corners	Data for CAM / Tool Management Software
  S (Square)	Cast Iron	E(20°）	-	-

  From: 176,850 VND
  Days to Ship: Số ngày giao hàng: 6 Day(s) or more

  6 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Used for SEC-Wave Mill AXET-PEFR-S

  SUMITOMO ELECTRIC HARDMETAL

  Adopts a curved edge to improve cutting edge strength and reduce cutting force. The high-precision cutting edge realizes a high-quality machined surface that approaches the finishing area.

  Shape (initial letter of model number)	work material	Clearance angle	Available corners	Data for CAM / Tool Management Software
  A (85° parallelogram)	Cast Iron	P (11°)	-	-

  From: 181,768 VND
  Days to Ship: Số ngày giao hàng: 6 Day(s) or more

  6 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Used for SEC-Wave Mill AXMT-PEER-H

  SUMITOMO ELECTRIC HARDMETAL

  Adopts a curved edge to improve cutting edge strength and reduce cutting force. The high-precision cutting edge realizes a high-quality machined surface that approaches the finishing area.

  Shape (initial letter of model number)	work material	Clearance angle	Available corners	Data for CAM / Tool Management Software
  A (85° parallelogram)	Cast Iron	P (11°)	-	-

  From: 174,883 VND
  Days to Ship: Số ngày giao hàng: 6 Day(s) or more

  6 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Used for SEC-Wave Mill, WGC Model SEMT13T3AG□N-□

  SUMITOMO ELECTRIC HARDMETAL

  Manufactured by Sumitomo Electric Hardmetal.The optimized shape and tough material provide both cutting performance and strength at a high level.

  Shape (initial letter of model number)	work material	Clearance angle	Available corners	Data for CAM / Tool Management Software
  S (Square)	Cast Iron	E(20°）	-	-

  From: 185,309 VND
  Days to Ship: Số ngày giao hàng: 6 Day(s) or more

  6 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Blade Tip Replacement Tip APET-PDFR-S

  SUMITOMO ELECTRIC HARDMETAL

  Offers both cutting performance and cutting edge strength. Achieves a reduced cutting -chip discharge amount with a lower required power by reducing cutting force.

  Shape (initial letter of model number)	work material	Clearance angle	Available corners	Data for CAM / Tool Management Software
  A (85° parallelogram)	Cast Iron	P (11°)	-	-

  From: 262,766 VND
  Days to Ship: Số ngày giao hàng: 6 Day(s) or more

  6 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Used for SEC-Multi Mill, CHE model TEEN-R

  SUMITOMO ELECTRIC HARDMETAL

  Insert for Multi-Mill CHE Type.● Work material: non-ferrous metals, cast iron● Grade: SUMIDIA, cemented carbide● Compatible machining: finishing to light cutting / general purpose cutting / high speed and light cutting

  Shape (initial letter of model number)	work material	Clearance angle	Available corners	Data for CAM / Tool Management Software
  T (Equilateral Triangle Type)	Cast Iron	E(20°）	-	-

  From: 209,309 VND
  Days to Ship: Số ngày giao hàng: 8 Day(s) or more

  8 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Blade Tip Replacement Tip AECT-PEFRA

  SUMITOMO ELECTRIC HARDMETAL

  [Applications]It can be used for high-speed and light cutting, and general-purpose cutting. [Features]Cemented carbide and DLC materials are used.

  Shape (initial letter of model number)	work material	Clearance angle	Available corners	Data for CAM / Tool Management Software
  A (85° parallelogram)	Cast Iron	E(20°）	-	-

  From: 338,357 VND
  Days to Ship: Số ngày giao hàng: 6 Day(s) or more

  6 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Blade Tip Replacement Tip SFEN12T3AZ□N

  SUMITOMO ELECTRIC HARDMETAL

  For general-purpose cutters with ultra-high rake blade shape.[Applications]Used for cutting general-purpose and difficult-to-cut materials.

  Shape (initial letter of model number)	work material	Clearance angle	Available corners	Data for CAM / Tool Management Software
  S (Square)	Cast Iron	F(25°）	-	-

  From: 232,719 VND
  Days to Ship: Số ngày giao hàng: 6 Day(s) or more

  6 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Blade Tip Replacement Tip SPMT

  SUMITOMO ELECTRIC HARDMETAL

  This cutter with a ball handle for three-dimensional profiling can be used for the rough machining of molds and machine parts.A long type for rough machining.[Applications]It is used for three-dimensional profiling rough machining.

  Shape (initial letter of model number)	work material	Clearance angle	Available corners	Data for CAM / Tool Management Software
  S (Square)	Cast Iron	P (11°)	-	-

  From: 150,415 VND
  Days to Ship: Số ngày giao hàng: 6 Day(s) or more

  6 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Used for SEC-DNX Type SNMT13T6ANER-□

  SUMITOMO ELECTRIC HARDMETAL

  Higher strength compared to a cutter that uses one side. Cost-effective with twice the number of corners by using both sides.

  Shape (initial letter of model number)	work material	Clearance angle	Available corners	Data for CAM / Tool Management Software
  S (Square)	Cast Iron	N(0°）	-	-

  From: 271,866 VND
  Days to Ship: Số ngày giao hàng: 6 Day(s) or more

  6 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Used for SEC-Sumi UFO Mill, UFO Model SFEN1504AZ□N

  SUMITOMO ELECTRIC HARDMETAL

  [Features]·Highest abrasion resistance grade and suitable high speed continuous cutting.Grade: cemented carbide, coating, Cermet

  Shape (initial letter of model number)	work material	Clearance angle	Available corners	Data for CAM / Tool Management Software
  S (Square)	Cast Iron	F(25°）	-	-

  From: 320,535 VND
  Days to Ship: Số ngày giao hàng: 6 Day(s) or more

  6 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Used for SEC-Sumi UFO Mill, UFO Model UW-R

  SUMITOMO ELECTRIC HARDMETAL

  [Features]·Suitable for cutting general-purpose cutting materials.·Right-handedGrade: Carbide Alloy

  Shape (initial letter of model number)	work material	Clearance angle	Available corners	Data for CAM / Tool Management Software
  Other	Cast Iron	Other	-	-

  From: 370,422 VND
  Days to Ship: Số ngày giao hàng: 6 Day(s) or more

  6 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Used for SEC-Wave Bore, WBMR Model ZNMT

  SUMITOMO ELECTRIC HARDMETAL

  [Features]·All sizes of these M-class inserts have high strength and are economical.Relief angle: N (0°)

  Shape (initial letter of model number)	work material	Clearance angle	Available corners	Data for CAM / Tool Management Software
  Other	Cast Iron	N(0°）	-	-

  From: 363,341 VND
  Days to Ship: Số ngày giao hàng: 6 Day(s) or more

  6 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Used for SEC-Wave Mill, WFM Model XDMT-PDEN

  SUMITOMO ELECTRIC HARDMETAL

  [Features]·An insert for Wave Mill WFM type.Grade: CoatingRelief angle: D (15°)

  Shape (initial letter of model number)	work material	Clearance angle	Available corners	Data for CAM / Tool Management Software
  Other	Cast Iron	D(15°）	-	-

  From: 190,424 VND
  Days to Ship: Số ngày giao hàng: 6 Day(s) or more

  6 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Used for SEC-Wave Mill, WGC Model SEET0903AG□N-□

  SUMITOMO ELECTRIC HARDMETAL

  [Features]·The optimized shape and strong material provide high sharpness and strength.·A wide variety of insert items are available to meet diverse needs.

  Shape (initial letter of model number)	work material	Clearance angle	Available corners	Data for CAM / Tool Management Software
  S (Square)	Cast Iron	E(20°）	-	-

  From: 142,228 VND
  Days to Ship: Số ngày giao hàng: 6 Day(s) or more

  6 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Used for SEC-Wave Mill, WGC Model SEMT0903AG□N-□

  SUMITOMO ELECTRIC HARDMETAL

  [Features]·The optimized shape and strong material provide high sharpness and strength.Relief angle: E (20°)Thickness (mm): 3.18

  Shape (initial letter of model number)	work material	Clearance angle	Available corners	Data for CAM / Tool Management Software
  S (Square)	Cast Iron	E(20°）	-	-

  From: 145,769 VND
  Days to Ship: Số ngày giao hàng: 6 Day(s) or more

  6 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  SEC-Wave Mill For WGX Type Insert

  SUMITOMO ELECTRIC HARDMETAL

  [Features]·The wiper edge shape improves surface roughness, and the large rake angle and cutting edge rake angle improve sharpness.

  Shape (initial letter of model number)	work material	Clearance angle	Available corners	Data for CAM / Tool Management Software
  S (Square)	Cast Iron	E(20°）	-	-

  From: 185,309 VND
  Days to Ship: Số ngày giao hàng: 8 Day(s) or more

  8 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Used for SEC-Wave Mill, WGC Model XEEW

  SUMITOMO ELECTRIC HARDMETAL

  [Features]·The optimized shape and strong material provide high sharpness and strength.Relief angle: E (20°)Thickness (mm): 3.97

  Shape (initial letter of model number)	work material	Clearance angle	Available corners	Data for CAM / Tool Management Software
  Other	Cast Iron	E(20°）	-	-

  From: 271,866 VND
  Days to Ship: Số ngày giao hàng: 6 Day(s) or more

  6 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Blade Tip Replacement Tip APET-PDER-F

  SUMITOMO ELECTRIC HARDMETAL

  Combines sharpness and edge strength. Reduced cutting resistance realizes chip discharge amounts with lower required power

  Shape (initial letter of model number)	work material	Clearance angle	Available corners	Data for CAM / Tool Management Software
  A (85° parallelogram)	Cast Iron	P (11°)	-	-

  From: 300,390 VND
  Days to Ship: Số ngày giao hàng: 6 Day(s) or more

  6 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Used for SEC-Wave Mill AXMT-PEER-L

  SUMITOMO ELECTRIC HARDMETAL

  Curved cutting blade adopted to improve cutting edge strength and reduce cutting resistance. Achieves high quality machining in the finishing region with the high precision cutting blade.

  Shape (initial letter of model number)	work material	Clearance angle	Available corners	Data for CAM / Tool Management Software
  A (85° parallelogram)	Cast Iron	P (11°)	-	-

  From: 202,621 VND
  Days to Ship: Số ngày giao hàng: 6 Day(s) or more

  6 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Used With NDF Model for SEC-Wave Mill NW

  SUMITOMO ELECTRIC HARDMETAL

  [Features]·Suitable for general-purpose cutting and high speed and light cutting.Grade: cemented carbide, Cermet

  Shape (initial letter of model number)	work material	Clearance angle	Available corners	Data for CAM / Tool Management Software
  Other	Cast Iron	-	-	-

  From: 287,013 VND
  Days to Ship: Số ngày giao hàng: 6 Day(s) or more

  6 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Used for SEC-Wave Radius Mill, WRCX Model QPET-PPFR-S

  SUMITOMO ELECTRIC HARDMETAL

  [Features]·Right-handed·This product has an arc wiper edge for good surface roughness and a good cutting edge angle.Relief angle: P (11°)

  Shape (initial letter of model number)	work material	Clearance angle	Available corners	Data for CAM / Tool Management Software
  Other	Cast Iron	P (11°)	-	-

  From: 207,735 VND
  Days to Ship: Số ngày giao hàng: 6 Day(s) or more

  6 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Used for SEC-Wave Radius Mill, WRCX Model QPMT-PPEN

  SUMITOMO ELECTRIC HARDMETAL

  [Features]Relief angle: P (11°)Grade: CoatingThickness (mm): 3.18, 3.97, 4.76, 6.5

  Shape (initial letter of model number)	work material	Clearance angle	Available corners	Data for CAM / Tool Management Software
  Other	Cast Iron	P (11°)	-	-

  From: 128,457 VND
  Days to Ship: Số ngày giao hàng: 6 Day(s) or more

  6 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Used for SEC-Wave Radius Mill, WRCX Model QPMT-PPEN-CP

  SUMITOMO ELECTRIC HARDMETAL

  [Features]Relief angle: P (11°)Grade: CoatingCorner radius: 0.8Thickness (mm): 6.5

  Shape (initial letter of model number)	work material	Clearance angle	Available corners	Data for CAM / Tool Management Software
  Other	Cast Iron	P (11°)	-	-

  From: 304,325 VND
  Days to Ship: Số ngày giao hàng: 6 Day(s) or more

  6 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Used for SEC-Wave Radius Mill, WRCX Model QPMT-PPEN-H

  SUMITOMO ELECTRIC HARDMETAL

  [Features]·This product can meet diverse needs in milling steel, stainless steel, cast iron, and non-ferrous alloys.

  Shape (initial letter of model number)	work material	Clearance angle	Available corners	Data for CAM / Tool Management Software
  Other	Cast Iron	P (11°)	-	-

  From: 128,457 VND
  Days to Ship: Số ngày giao hàng: 6 Day(s) or more

  6 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  SEC-Ace Mill CSNB-M

  SUMITOMO ELECTRIC HARDMETAL

  This cast iron cutter allows for the use of both sides of the insert.For general turning of cast iron and steel.

  Shape (initial letter of model number)	work material	Clearance angle	Available corners	Data for CAM / Tool Management Software
  S (Square)	Cast Iron	N(0°）	-	-

  From: 191,998 VND
  Days to Ship: Số ngày giao hàng: 6 Day(s) or more

  6 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  SEC-Ace Mill CSNH-M

  SUMITOMO ELECTRIC HARDMETAL

  [Applications]It can be used for machining steel, cast iron, stainless steel, and difficult-to-cut materials. [Features]Cermet and cemented carbide are used.

  Shape (initial letter of model number)	work material	Clearance angle	Available corners	Data for CAM / Tool Management Software
  S (Square)	Cast Iron	N(0°）	-	-

  From: 188,850 VND
  Days to Ship: Số ngày giao hàng: 6 Day(s) or more

  6 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  SEC-Ace Mill CSN-M

  SUMITOMO ELECTRIC HARDMETAL

  This cast iron cutter allows for the use of both sides of the insert.For general turning of cast iron and steel.

  Shape (initial letter of model number)	work material	Clearance angle	Available corners	Data for CAM / Tool Management Software
  S (Square)	Cast Iron	N(0°）	-	-

  From: 287,013 VND
  Days to Ship: Số ngày giao hàng: 6 Day(s) or more

  6 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Used for SEC-Ace Mill, APG Model SDC-L

  SUMITOMO ELECTRIC HARDMETAL

  This cutter for light alloys offers outstanding sharpness.For general cutting of light alloys and mild steel.

  Shape (initial letter of model number)	work material	Clearance angle	Available corners	Data for CAM / Tool Management Software
  S (Square)	Cast Iron	D(15°）	-	-

  From: 243,932 VND
  Days to Ship: Số ngày giao hàng: 6 Day(s) or more

  6 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Used for SEC-Ace Mill, APG Model SDC-R

  SUMITOMO ELECTRIC HARDMETAL

  An insert for ace mills.[Shape]S (square) "relief angle" D (15°)

  Shape (initial letter of model number)	work material	Clearance angle	Available corners	Data for CAM / Tool Management Software
  S (Square)	Cast Iron	D(15°）	-	-

  From: 243,932 VND
  Days to Ship: Số ngày giao hàng: 6 Day(s) or more

  6 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Used for SEC-Ace Mill, CPG Model TPCH-L

  SUMITOMO ELECTRIC HARDMETAL

  A cutter for right-angle shoulder milling with a positive insert.For corner cutting of steel, cast iron, and stainless steel.

  Shape (initial letter of model number)	work material	Clearance angle	Available corners	Data for CAM / Tool Management Software
  T (Equilateral Triangle Type)	Cast Iron	P (11°)	-	-

  From: 191,998 VND
  Days to Ship: Số ngày giao hàng: 6 Day(s) or more

  6 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Used for SEC-Ace Mill, CPG Model TPCH-R

  SUMITOMO ELECTRIC HARDMETAL

  A cutter for right-angle shoulder milling with a positive insert.For corner cutting of steel, cast iron, and stainless steel.

  Shape (initial letter of model number)	work material	Clearance angle	Available corners	Data for CAM / Tool Management Software
  T (Equilateral Triangle Type)	Cast Iron	P (11°)	-	-

  From: 191,998 VND
  Days to Ship: Số ngày giao hàng: 8 Day(s) or more

  8 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Used for SEC-Ace Mill, CPG Model TPCH-TR

  SUMITOMO ELECTRIC HARDMETAL

  [Applications]It can be used for machining steel, cast iron and stainless steel. [Features]Cermet and cemented carbide are used.

  Shape (initial letter of model number)	work material	Clearance angle	Available corners	Data for CAM / Tool Management Software
  T (Equilateral Triangle Type)	Cast Iron	P (11°)	-	-

  From: 191,998 VND
  Days to Ship: Số ngày giao hàng: 8 Day(s) or more

  8 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Used for SEC-Ace Mill, DNF Model SNC-MW

  SUMITOMO ELECTRIC HARDMETAL

  It provides a beautifully finished surface with an arc wiper edge.For high feed finishing of cast iron.[Grade]Carbide Alloy

  Shape (initial letter of model number)	work material	Clearance angle	Available corners	Data for CAM / Tool Management Software
  S (Square)	Cast Iron	N(0°）	-	-

  From: 269,899 VND
  Days to Ship: Số ngày giao hàng: 6 Day(s) or more

  6 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Used for SEC-Ace Mill, DPG Model DPW-L

  SUMITOMO ELECTRIC HARDMETAL

  This product has a positive cutting edge shape and can be used for a variety of work materials.For general cutting of steel, cast iron, and stainless steel.

  Shape (initial letter of model number)	work material	Clearance angle	Available corners	Data for CAM / Tool Management Software
  Other	Cast Iron	P (11°)	-	-

  From: 389,111 VND
  Days to Ship: Số ngày giao hàng: 6 Day(s) or more

  6 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Used for SEC-Ace Mill, DPG Model DPW-R

  SUMITOMO ELECTRIC HARDMETAL

  This product has a positive cutting edge shape and can be used for a variety of work materials.For general cutting of steel, cast iron, and stainless steel.

  Shape (initial letter of model number)	work material	Clearance angle	Available corners	Data for CAM / Tool Management Software
  Other	Cast Iron	P (11°)	-	-

  From: 389,111 VND
  Days to Ship: Số ngày giao hàng: 6 Day(s) or more

  6 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Used for SEC-Ace Mill, DPG Model GW-R

  SUMITOMO ELECTRIC HARDMETAL

  This product has a positive cutting edge shape and can be used for a variety of work materials.For general cutting of steel, cast iron, and stainless steel.

  Shape (initial letter of model number)	work material	Clearance angle	Available corners	Data for CAM / Tool Management Software
  Other	Cast Iron	P (11°)	-	-

  From: 506,552 VND
  Days to Ship: Số ngày giao hàng: 6 Day(s) or more

  6 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Used for SEC-Ace Mill, DPG Model SPCH-L

  SUMITOMO ELECTRIC HARDMETAL

  This product has a positive cutting edge shape and can be used for a variety of work materials.For general cutting of steel, cast iron, and stainless steel.

  Shape (initial letter of model number)	work material	Clearance angle	Available corners	Data for CAM / Tool Management Software
  S (Square)	Cast Iron	P (11°)	-	-

  From: 133,572 VND
  Days to Ship: Số ngày giao hàng: 6 Day(s) or more

  6 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Used for SEC-Ace Mill, DPG Model SPCH-R

  SUMITOMO ELECTRIC HARDMETAL

  This product has a positive cutting edge shape and can be used for a variety of work materials.For general cutting of steel, cast iron, and stainless steel.

  Shape (initial letter of model number)	work material	Clearance angle	Available corners	Data for CAM / Tool Management Software
  S (Square)	Cast Iron	P (11°)	-	-

  From: 133,572 VND
  Days to Ship: Số ngày giao hàng: 6 Day(s) or more

  6 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Used for SEC-Ace Mill, DPG Model SPCH-TL

  SUMITOMO ELECTRIC HARDMETAL

  This product has a positive cutting edge shape and can be used for a variety of work materials.For general cutting of steel, cast iron, and stainless steel.

  Shape (initial letter of model number)	work material	Clearance angle	Available corners	Data for CAM / Tool Management Software
  S (Square)	Cast Iron	P (11°)	-	-

  From: 242,358 VND
  Days to Ship: Số ngày giao hàng: 6 Day(s) or more

  6 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Used for SEC-Ace Mill, DPG Model SPCH-TR

  SUMITOMO ELECTRIC HARDMETAL

  This product has a positive cutting edge shape and can be used for a variety of work materials.For general cutting of steel, cast iron, and stainless steel.

  Shape (initial letter of model number)	work material	Clearance angle	Available corners	Data for CAM / Tool Management Software
  S (Square)	Cast Iron	P (11°)	-	-

  From: 133,572 VND
  Days to Ship: Số ngày giao hàng: 6 Day(s) or more

  6 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Used for SEC-Ace Mill, EHG Model SEKN-MT

  SUMITOMO ELECTRIC HARDMETAL

  Lightweight and compact, suitable for machining centers.For cutting general-purpose and difficult-to-cut materials.

  Shape (initial letter of model number)	work material	Clearance angle	Available corners	Data for CAM / Tool Management Software
  S (Square)	Cast Iron	E(20°）	-	-

  From: 133,572 VND
  Days to Ship: Số ngày giao hàng: 6 Day(s) or more

  6 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Used for SEC-Ace Mill, FPG Model SDKN-M

  SUMITOMO ELECTRIC HARDMETAL

  [Applications]It can be used for machining steel, cast iron, stainless steel, and difficult-to-cut materials. [Features]Cemented carbide, SUMIDIA, and CVD coated materials are used.

  Shape (initial letter of model number)	work material	Clearance angle	Available corners	Data for CAM / Tool Management Software
  S (Square)	Cast Iron	D(15°）	-	-

  From: 133,572 VND
  Days to Ship: Số ngày giao hàng: 6 Day(s) or more

  6 Day(s) or more

BrandNhãn hiệu
Product SeriesDòng sản phẩm
From
Days to ShipSố ngày giao hàng
Shape (initial letter of model number)
work material
Clearance angle
Available corners
Data for CAM / Tool Management Software

	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare
BrandNhãn hiệu	SUMITOMO ELECTRIC HARDMETAL	SUMITOMO ELECTRIC HARDMETAL	SUMITOMO ELECTRIC HARDMETAL	SUMITOMO ELECTRIC HARDMETAL	SUMITOMO ELECTRIC HARDMETAL	SUMITOMO ELECTRIC HARDMETAL	SUMITOMO ELECTRIC HARDMETAL	SUMITOMO ELECTRIC HARDMETAL	SUMITOMO ELECTRIC HARDMETAL	SUMITOMO ELECTRIC HARDMETAL	SUMITOMO ELECTRIC HARDMETAL	SUMITOMO ELECTRIC HARDMETAL	SUMITOMO ELECTRIC HARDMETAL	SUMITOMO ELECTRIC HARDMETAL	SUMITOMO ELECTRIC HARDMETAL	SUMITOMO ELECTRIC HARDMETAL	SUMITOMO ELECTRIC HARDMETAL	SUMITOMO ELECTRIC HARDMETAL	SUMITOMO ELECTRIC HARDMETAL	SUMITOMO ELECTRIC HARDMETAL	SUMITOMO ELECTRIC HARDMETAL	SUMITOMO ELECTRIC HARDMETAL	SUMITOMO ELECTRIC HARDMETAL	SUMITOMO ELECTRIC HARDMETAL	SUMITOMO ELECTRIC HARDMETAL	SUMITOMO ELECTRIC HARDMETAL	SUMITOMO ELECTRIC HARDMETAL	SUMITOMO ELECTRIC HARDMETAL	SUMITOMO ELECTRIC HARDMETAL	SUMITOMO ELECTRIC HARDMETAL	SUMITOMO ELECTRIC HARDMETAL	SUMITOMO ELECTRIC HARDMETAL	SUMITOMO ELECTRIC HARDMETAL	SUMITOMO ELECTRIC HARDMETAL	SUMITOMO ELECTRIC HARDMETAL	SUMITOMO ELECTRIC HARDMETAL	SUMITOMO ELECTRIC HARDMETAL	SUMITOMO ELECTRIC HARDMETAL	SUMITOMO ELECTRIC HARDMETAL	SUMITOMO ELECTRIC HARDMETAL	SUMITOMO ELECTRIC HARDMETAL	SUMITOMO ELECTRIC HARDMETAL	SUMITOMO ELECTRIC HARDMETAL	SUMITOMO ELECTRIC HARDMETAL	SUMITOMO ELECTRIC HARDMETAL
Product SeriesDòng sản phẩm	Used for SEC-Wave Mill AXMT-PEER-G	Blade Tip Replacement Tip APMT-PDER	Used for SEC-Wave Mill, WGC Model SEET13T3AG□N-□	Used for SEC-Wave Mill AXET-PEFR-S	Used for SEC-Wave Mill AXMT-PEER-H	Used for SEC-Wave Mill, WGC Model SEMT13T3AG□N-□	Blade Tip Replacement Tip APET-PDFR-S	Used for SEC-Multi Mill, CHE model TEEN-R	Blade Tip Replacement Tip AECT-PEFRA	Blade Tip Replacement Tip SFEN12T3AZ□N	Blade Tip Replacement Tip SPMT	Used for SEC-DNX Type SNMT13T6ANER-□	Used for SEC-Sumi UFO Mill, UFO Model SFEN1504AZ□N	Used for SEC-Sumi UFO Mill, UFO Model UW-R	Used for SEC-Wave Bore, WBMR Model ZNMT	Used for SEC-Wave Mill, WFM Model XDMT-PDEN	Used for SEC-Wave Mill, WGC Model SEET0903AG□N-□	Used for SEC-Wave Mill, WGC Model SEMT0903AG□N-□	SEC-Wave Mill For WGX Type Insert	Used for SEC-Wave Mill, WGC Model XEEW	Blade Tip Replacement Tip APET-PDER-F	Used for SEC-Wave Mill AXMT-PEER-L	Used With NDF Model for SEC-Wave Mill NW	Used for SEC-Wave Radius Mill, WRCX Model QPET-PPFR-S	Used for SEC-Wave Radius Mill, WRCX Model QPMT-PPEN	Used for SEC-Wave Radius Mill, WRCX Model QPMT-PPEN-CP	Used for SEC-Wave Radius Mill, WRCX Model QPMT-PPEN-H	SEC-Ace Mill CSNB-M	SEC-Ace Mill CSNH-M	SEC-Ace Mill CSN-M	Used for SEC-Ace Mill, APG Model SDC-L	Used for SEC-Ace Mill, APG Model SDC-R	Used for SEC-Ace Mill, CPG Model TPCH-L	Used for SEC-Ace Mill, CPG Model TPCH-R	Used for SEC-Ace Mill, CPG Model TPCH-TR	Used for SEC-Ace Mill, DNF Model SNC-MW	Used for SEC-Ace Mill, DPG Model DPW-L	Used for SEC-Ace Mill, DPG Model DPW-R	Used for SEC-Ace Mill, DPG Model GW-R	Used for SEC-Ace Mill, DPG Model SPCH-L	Used for SEC-Ace Mill, DPG Model SPCH-R	Used for SEC-Ace Mill, DPG Model SPCH-TL	Used for SEC-Ace Mill, DPG Model SPCH-TR	Used for SEC-Ace Mill, EHG Model SEKN-MT	Used for SEC-Ace Mill, FPG Model SDKN-M
From	174,883 VND-	234,478 VND	176,850 VND-	181,768 VND-	174,883 VND-	185,309 VND	262,766 VND-	209,309 VND	338,357 VND-	232,719 VND-	150,415 VND-	271,866 VND-	320,535 VND-	370,422 VND-	363,341 VND-	190,424 VND	142,228 VND-	145,769 VND	185,309 VND	271,866 VND	300,390 VND	202,621 VND	287,013 VND	207,735 VND-	128,457 VND-	304,325 VND-	128,457 VND-	191,998 VND	188,850 VND-	287,013 VND	243,932 VND-	243,932 VND-	191,998 VND	191,998 VND-	191,998 VND	269,899 VND	389,111 VND	389,111 VND	506,552 VND	133,572 VND-	133,572 VND-	242,358 VND	133,572 VND-	133,572 VND-	133,572 VND-
Days to ShipSố ngày giao hàng	6 Day(s) or more	6 Day(s) or more	6 Day(s) or more	6 Day(s) or more	6 Day(s) or more	6 Day(s) or more	6 Day(s) or more	8 Day(s) or more	6 Day(s) or more	6 Day(s) or more	6 Day(s) or more	6 Day(s) or more	6 Day(s) or more	6 Day(s) or more	6 Day(s) or more	6 Day(s) or more	6 Day(s) or more	6 Day(s) or more	8 Day(s) or more	6 Day(s) or more	6 Day(s) or more	6 Day(s) or more	6 Day(s) or more	6 Day(s) or more	6 Day(s) or more	6 Day(s) or more	6 Day(s) or more	6 Day(s) or more	6 Day(s) or more	6 Day(s) or more	6 Day(s) or more	6 Day(s) or more	6 Day(s) or more	8 Day(s) or more	8 Day(s) or more	6 Day(s) or more	6 Day(s) or more	6 Day(s) or more	6 Day(s) or more	6 Day(s) or more	6 Day(s) or more	6 Day(s) or more	6 Day(s) or more	6 Day(s) or more	6 Day(s) or more
Shape (initial letter of model number)	A (85° parallelogram)	A (85° parallelogram)	S (Square)	A (85° parallelogram)	A (85° parallelogram)	S (Square)	A (85° parallelogram)	T (Equilateral Triangle Type)	A (85° parallelogram)	S (Square)	S (Square)	S (Square)	S (Square)	Other	Other	Other	S (Square)	S (Square)	S (Square)	Other	A (85° parallelogram)	A (85° parallelogram)	Other	Other	Other	Other	Other	S (Square)	S (Square)	S (Square)	S (Square)	S (Square)	T (Equilateral Triangle Type)	T (Equilateral Triangle Type)	T (Equilateral Triangle Type)	S (Square)	Other	Other	Other	S (Square)	S (Square)	S (Square)	S (Square)	S (Square)	S (Square)
work material	Cast Iron	Cast Iron	Cast Iron	Cast Iron	Cast Iron	Cast Iron	Cast Iron	Cast Iron	Cast Iron	Cast Iron	Cast Iron	Cast Iron	Cast Iron	Cast Iron	Cast Iron	Cast Iron	Cast Iron	Cast Iron	Cast Iron	Cast Iron	Cast Iron	Cast Iron	Cast Iron	Cast Iron	Cast Iron	Cast Iron	Cast Iron	Cast Iron	Cast Iron	Cast Iron	Cast Iron	Cast Iron	Cast Iron	Cast Iron	Cast Iron	Cast Iron	Cast Iron	Cast Iron	Cast Iron	Cast Iron	Cast Iron	Cast Iron	Cast Iron	Cast Iron	Cast Iron
Clearance angle	P (11°)	P (11°)	E(20°）	P (11°)	P (11°)	E(20°）	P (11°)	E(20°）	E(20°）	F(25°）	P (11°)	N(0°）	F(25°）	Other	N(0°）	D(15°）	E(20°）	E(20°）	E(20°）	E(20°）	P (11°)	P (11°)	-	P (11°)	P (11°)	P (11°)	P (11°)	N(0°）	N(0°）	N(0°）	D(15°）	D(15°）	P (11°)	P (11°)	P (11°)	N(0°）	P (11°)	P (11°)	P (11°)	P (11°)	P (11°)	P (11°)	P (11°)	E(20°）	D(15°）
Available corners	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-
Data for CAM / Tool Management Software	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-

Loading...Tải…