SHINWASOKUTEI Straight Scale Rulers

• You can add up to 6 items per a category to the compare list. Compare

  

  Stainless Steel Straight Edge Warranty (Product Body and JCSS Calibration Certificate)

  SHINWASOKUTEI

  A straight stainless steel with a JCSS calibration certificate.[Features]·It is a JIS grade 1 product and has an inch conversion table on the back.·You can choose from six sizes: 15 cm, 30 cm, 60 cm, 1 m, 1.5 m, and 2 m, depending on your intended use.·A certificate that examines and certifies that the technical capabilities and traceability of a business site meet the standards for calibration institution accreditation.[Applications]·Available when used for length measurements.

  Measuring Range(mm)	Surface Finish	Scale gradation of the lower level(mm)	Scale gradation of the upper level(mm)	Material	Calibration	JIS	Calibration Certificate
  -	-	-	-	-	-	-	-

  From: 2,472,375 VND
  Days to Ship: Số ngày giao hàng: 8 Day(s)

  8 Day(s)

• You can add up to 6 items per a category to the compare list. Compare

  

  Stainless Steel Straight Edge

  SHINWASOKUTEI

  A standard ruler to measure length.[Features]· JIS Class 1 with an extensive range of sizes from 15 cm to 2 m.· Stainless steel material used in its original form.· Inch conversion table on back surface (15 cm to 1 m, no longer than 1.5 m)[Applications]· Ideal for measuring the length of straight lines.

  Measuring Range(mm)	Surface Finish	Scale gradation of the lower level(mm)	Scale gradation of the upper level(mm)	Material	Calibration	JIS	Calibration Certificate
  150 ～ 3000	Stainless Steel	0.5 ～ 1	1 / 0.5 up to 100 mm, Other: 1	Stainless Steel	Corresponds To	JIS1 Grade	-

  From: 90,450 VND
  Days to Ship: Số ngày giao hàng: Same day or more

  Same day or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Ruler Silver

  SHINWASOKUTEI

  Silver-coated ruler which suppresses surface reflection for easily readable scale.[Features]· JIS Class 1 with an extensive range of sizes (15 cm to 2 m are available).· An etched and plated scale whose performance will not deteriorate over time, even when used under harsh conditions.[Applications]· Ideal for measuring length.

  Measuring Range(mm)	Surface Finish	Scale gradation of the lower level(mm)	Scale gradation of the upper level(mm)	Material	Calibration	JIS	Calibration Certificate
  150 ～ 3000	Silver	0.5 ～ 1	1 / 0.5 up to 100 mm, Other: 1	Stainless Steel	Corresponds To	JIS1 Grade	-

  From: 102,403 VND
  Days to Ship: Số ngày giao hàng: Same day or more

  Same day or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Machine Scale

  SHINWASOKUTEI

  [Features]· All the scales are width 15 mm x thickness 0.5 mm.[Material]· Stainless steel.

  Measuring Range(mm)	Surface Finish	Scale gradation of the lower level(mm)	Scale gradation of the upper level(mm)	Material	Calibration	JIS	Calibration Certificate
  50 ～ 500	-	-	-	Stainless Steel	-	-	-

  From: 368,428 VND
  Days to Ship: Số ngày giao hàng: 4 Day(s) or more

  4 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  

  

  Narrow Width Carpenter's Square Angle Ruler

  SHINWASOKUTEI

  A ruler for measuring the dimensions of rounded shapes or for adhering to machinery etc.[Features]· A thin, narrow width type.· Same quality as JIS standard products.· Silver-coated for easily readable scale.· Etched and plated scale maintains its performance even under harsh conditions.[Applications]· Ideal for measuring length.

  Measuring Range(mm)	Surface Finish	Scale gradation of the lower level(mm)	Scale gradation of the upper level(mm)	Material	Calibration	JIS	Calibration Certificate
  300 ～ 1500	Silver	0.5 ～ 1	1	Stainless Steel	Corresponds To	-	-

  From: 128,700 VND
  Special Price
  Days to Ship: Số ngày giao hàng: Same day or more

  Same day or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Angle Ruler, 1 mm Vertical Pitch

  SHINWASOKUTEI

  [Features]· JIS1 Grade.· Inch conversion table on back surface.· Scale: Upper/lower 1 mm pitch.· A 1 mm pitch, easy to read when fine scales are not necessary.

  Measuring Range(mm)	Surface Finish	Scale gradation of the lower level(mm)	Scale gradation of the upper level(mm)	Material	Calibration	JIS	Calibration Certificate
  600	Silver	1	1	Stainless Steel	-	JIS1 Grade	-

  From: 754,886 VND
  Days to Ship: Số ngày giao hàng: 4 Day(s) or more

  4 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Straight Edge: Angle Ruler (with Stopper)

  SHINWASOKUTEI

  A ruler which can measure not only length but also depth or steps.[Features]· JIS1 Grade.· With red numerals.· With a silver stopper.[Applications]· Ideal for measuring length, depth, or steps.

  Measuring Range(mm)	Surface Finish	Scale gradation of the lower level(mm)	Scale gradation of the upper level(mm)	Material	Calibration	JIS	Calibration Certificate
  150 ～ 300	Silver	0.5	1	Stainless Steel	Corresponds To	JIS1 Grade	-

  From: 171,600 VND
  Days to Ship: Số ngày giao hàng: 9 Day(s)

  9 Day(s)

• You can add up to 6 items per a category to the compare list. Compare

  

  Pick Up Scale, Silver

  SHINWASOKUTEI

  [Features]· JIS Grade 1 (15 cm – 1 m)· The basic performance is unchanged, with the tip of the scale bent, to make grasping easier· Large, easily readable numbers are adopted[Specifications]· Weights and measures conversion table on back surface.· Scale: Upper/lower 1 mm pitch

  Measuring Range(mm)	Surface Finish	Scale gradation of the lower level(mm)	Scale gradation of the upper level(mm)	Material	Calibration	JIS	Calibration Certificate
  150 ～ 1000	Silver	1	1	Stainless Steel	Corresponds To	JIS1 Grade	-

  From: 55,110 VND
  Days to Ship: Số ngày giao hàng: 9 Day(s)

  9 Day(s)

• You can add up to 6 items per a category to the compare list. Compare

  

  Fiber Folding Scale, Measuring Range 1000 mm-2000 mm

  SHINWASOKUTEI

  [Features]· Structure is filled with glass fiber, so it is light, doesn't rust, and doesn't conduct electricity.· Large easy to read numbers.· It has excellent workability since it clicks into place at 90°/180°.· It is resistant to water and the scale is also durable.· A foldable type convenient for carrying

  Measuring Range(mm)	Surface Finish	Scale gradation of the lower level(mm)	Scale gradation of the upper level(mm)	Material	Calibration	JIS	Calibration Certificate
  1000 ～ 2000	-	-	-	Resin	-	-	-

  From: 170,610 VND
  Days to Ship: Số ngày giao hàng: 4 Day(s) or more

  4 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Straight Edge: Angle Ruler and Measuring Scale in cm Scale

  SHINWASOKUTEI

  [Features]· A ruler with a foot equivalent scale convenient for carpenters.· When either foot equivalent scale or centimeter scale is on the top level of the main bodyDouble left base point type specification where the base point of the scale is on the end face of the left side. (Product number 13210 top and bottom scale base points are both at the right end.)[Specifications]· Conversion table on back surface Double-left base point type: Weights and measures conversion table on front surface. Right reference point type: Inch conversion table included· Scale: Upper level: 1 mm pitch / Lower level: Ft equivalent

  Measuring Range(mm)	Surface Finish	Scale gradation of the lower level(mm)	Scale gradation of the upper level(mm)	Material	Calibration	JIS	Calibration Certificate
  -	-	-	1	-	-	-	-

  From: 862,602 VND
  Days to Ship: Số ngày giao hàng: 8 Day(s) or more

  8 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Cast Iron Ruler Silver cm Display

  SHINWASOKUTEI

  [Features]· Used when manufacturing wooden forms or dies for cast metal, and when measuring die dimensions. When casting, molten cast iron is poured into sand depressions to harden. The mold is made slightly larger as it expands and contracts at this stage. The contraction percentage varies depending on the metal, size, and casting factory, so the appropriate casting measure for the expansion percentage is necessary.· Silver processing suppresses the surface reflection to make the scale easy to read. [Specifications]· Material: Stainless Steel

  Measuring Range(mm)	Surface Finish	Scale gradation of the lower level(mm)	Scale gradation of the upper level(mm)	Material	Calibration	JIS	Calibration Certificate
  -	-	-	-	Stainless Steel	-	-	-

  From: 547,808 VND
  Days to Ship: Số ngày giao hàng: 4 Day(s) or more

  4 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Aluminum Cutting Ruler Cut Master PROTECT

  SHINWASOKUTEI

  [Features]· As the protective wall can be folded, it does not intrude when carrying or storing.· The protective wall with a height of 30 mm (35 mm from the cutting surface) protects hands.· With a protective cap, it does not damage materials.

  Measuring Range(mm)	Surface Finish	Scale gradation of the lower level(mm)	Scale gradation of the upper level(mm)	Material	Calibration	JIS	Calibration Certificate
  1,000 ～ 700	-	-	-	Aluminum	-	-	-

  From: 928,995 VND
  Days to Ship: Số ngày giao hàng: 4 Day(s) or more

  4 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Narrow Width Carpenter's Square Angle Ruler with Warranty (for Product Base Unit and JCSS Calibration Certificate)

  SHINWASOKUTEI

  Straight ruler with JCSS calibration certificate. [Features]・Narrow and thin. ・Available in 5 sizes: 30cm, 60cm, 1m, 1.5m, and 2m, so you can choose according to your needs. ・JCSS calibration certificate is accepted as an equivalent calibration certificate among mutually recognized signing bodies and countries. [Applications]・Can be used to measure length. ・Ideal for measuring R-shaped dimensions and pasting on machines, etc.

  Measuring Range(mm)	Surface Finish	Scale gradation of the lower level(mm)	Scale gradation of the upper level(mm)	Material	Calibration	JIS	Calibration Certificate
  -	-	-	-	-	-	-	-

  From: 3,172,770 VND
  Days to Ship: Số ngày giao hàng: 9 Day(s) or more

  9 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  

  

  

  Telescopic Ruler, Measure 1 Direction, Type II

  SHINWASOKUTEI

  Telescopic-type straight ruler. [Features]· One-touch stopper lever for easy locking.· Includes tape on the back for marking and taking notes.· Includes a hook on the outside for performing external dimension measurement.· Large caps on both ends and graduations close to the edges make it convenient for measuring and scribing. [Applications]· For measuring dimensions for interior finishing and installing fittings.

  Measuring Range(mm)	Surface Finish	Scale gradation of the lower level(mm)	Scale gradation of the upper level(mm)	Material	Calibration	JIS	Calibration Certificate
  461-970 ～ 1078-2821	-	-	-	-	-	-	-

  From: 964,375 VND
  Days to Ship: Số ngày giao hàng: 6 Day(s) or more

  6 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Stopper for Direct Edge,76745

  SHINWASOKUTEI

  A stopper to be attached to a straight ruler.[Features]· By attaching this product to a straight ruler, you can measure not only length but also depth or steps.[Applications]· Ideal for scribing work and measuring length, depth and level difference.

  Measuring Range(mm)	Surface Finish	Scale gradation of the lower level(mm)	Scale gradation of the upper level(mm)	Material	Calibration	JIS	Calibration Certificate
  -	-	-	-	Brass	Non-Compatible	-	-

  From: 169,169 VND
  Days to Ship: Số ngày giao hàng: 9 Day(s)

  9 Day(s)

• You can add up to 6 items per a category to the compare list. Compare

  

  Aluminum Cutter Ruler, Cut Master EX

  SHINWASOKUTEI

  The cutter surface has a thin stainless steel plate pasted on both sides to help ensure that the blades do not catch.

  Measuring Range(mm)	Surface Finish	Scale gradation of the lower level(mm)	Scale gradation of the upper level(mm)	Material	Calibration	JIS	Calibration Certificate
  600 ～ 1250	-	-	-	Aluminum	-	-	-

  From: 736,561 VND
  Days to Ship: Số ngày giao hàng: 4 Day(s) or more

  4 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Aluminum Cutter Ruler, Cut Master EX with Handle

  SHINWASOKUTEI

  [Features]· The cutter surface has a thin stainless steel plate pasted on both sides to help ensure that the blades do not catch.· An incision-free, non-slip rubber has been adopted.· Made of elastomer resin. Adopts an easy-grip, easy-hold handle.· Each scale on the upper and lower levels has a left base point W starting from the edge.· With a foot equivalent scale convenient for carpenters.· Light, non-rusting, and durable.· Large, vivid scale numerals have been adopted.

  Measuring Range(mm)	Surface Finish	Scale gradation of the lower level(mm)	Scale gradation of the upper level(mm)	Material	Calibration	JIS	Calibration Certificate
  600 ～ 1500	-	-	-	Aluminum	-	-	-

  From: 1,084,256 VND
  Days to Ship: Số ngày giao hàng: 4 Day(s) or more

  4 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Aluminum Cutter Ruler, with Cutting Rail

  SHINWASOKUTEI

  A ruler which can be used for measuring length, drawing a straight line, or cutting.[Features]· Aluminum cutter ruler with emphasis on safety.[Applications]· For length measurement, line drawing, cutting and use as a circular saw guide ruler.

  Measuring Range(mm)	Surface Finish	Scale gradation of the lower level(mm)	Scale gradation of the upper level(mm)	Material	Calibration	JIS	Calibration Certificate
  1000	-	-	-	Aluminum	-	-	-

  From: 1,792,817 VND
  Days to Ship: Số ngày giao hàng: 4 Day(s) or more

  4 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Aluminum Cutter Ruler, Cut Master

  SHINWASOKUTEI

  [Features]· The cutter surface has a thin stainless steel plate pasted on to help ensure that the blades do not catch.· Anti-slip rubber is attached to the back surface to fix the ruler easily.· Uses a handle with a special shape that is easy to hold down.· Double left base point type. The base point of each side (measurement side and cutter side) is the left side. (Part number 65088: base point of the left side)· With a foot equivalent scale convenient for carpenters.· Large, vivid scale numerals have been adopted.· Light, non-rusting, and durable.

  Measuring Range(mm)	Surface Finish	Scale gradation of the lower level(mm)	Scale gradation of the upper level(mm)	Material	Calibration	JIS	Calibration Certificate
  1000 ～ 1500	-	-	-	Aluminum	-	-	-

  From: 778,400 VND
  Days to Ship: Số ngày giao hàng: 4 Day(s) or more

  4 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Aluminum Cutter Ruler, Cut Master with Handle

  SHINWASOKUTEI

  A ruler that can be used for cutting, measuring lengths, demarcation, or as a guide ruler for circular saws.[Features]· Lightweight and sturdy, with no rust.

  Measuring Range(mm)	Surface Finish	Scale gradation of the lower level(mm)	Scale gradation of the upper level(mm)	Material	Calibration	JIS	Calibration Certificate
  600 ～ 1500	-	-	-	Aluminum	-	-	-

  From: 938,955 VND
  Days to Ship: Số ngày giao hàng: 4 Day(s) or more

  4 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Nobisuke 3x Magnification 2-Direction Measuring Type Combination Scale

  SHINWASOKUTEI

  [Features]· Expands to 3 times the length and can be read close by.· Long distances can be easily measured even with just one person.· The stopper is plastic and will not damage the contacting areas.· Large, easily readable scale numbers are adopted.· As it is telescopic in both directions, it is held in the center. Thus it is particularly suitable for measuring inside dimensions by holding the center and extending the rod left and right.· For interior work, interior construction, fitting installation, front construction, step mounting, block piling, waterworks, stonework, etc.· A, AB types: For inner dimension measurement of areas with closet storage space, floor cupboards, and crown molding.· B/C/D/E types: For foot measures and span rods (shaku and ken measurements).

  Measuring Range(mm)	Surface Finish	Scale gradation of the lower level(mm)	Scale gradation of the upper level(mm)	Material	Calibration	JIS	Calibration Certificate
  1909 ～ 3636	-	-	-	Aluminum	-	-	-

  From: 1,315,164 VND
  Days to Ship: Số ngày giao hàng: 6 Day(s) or more

  6 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Drafting Tool Triangular Scale

  SHINWASOKUTEI

  A triangular scale used for creating drawings and reading dimensions.[Features]· Convenient for preparing and reading drawings that are required for registration procedures, such as land survey drawings and building floor plans. (A-15, A-30)· Triangle scale provided with essential scales for architectural design. (B-15, B-30)· A reduced copy of a drawing can be read at the original size. (C-15, C-30)[Applications]· For creating and reading drawings.

  Measuring Range(mm)	Surface Finish	Scale gradation of the lower level(mm)	Scale gradation of the upper level(mm)	Material	Calibration	JIS	Calibration Certificate
  -	-	-	-	Resin	-	-	-

  From: 209,206 VND
  Days to Ship: Số ngày giao hàng: 4 Day(s) or more

  4 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Straight Edge with Product Warranty (Product Body and JCSS Calibration Certificate)

  SHINWASOKUTEI

  Silver processing suppresses the surface reflection to make the scale easy to read. An etched and plated scale whose performance will not deteriorate over time, even when used under harsh conditions. Uses Japanese high grade materials.

  Measuring Range(mm)	Surface Finish	Scale gradation of the lower level(mm)	Scale gradation of the upper level(mm)	Material	Calibration	JIS	Calibration Certificate
  150 ～ 2000	Silver	0.5 ～ 1	1 / 0.5 up to 100 mm, Other: 1	Stainless Steel	Corresponds To	JIS1 Grade	-

  From: 2,640,000 VND
  Days to Ship: Số ngày giao hàng: 8 Day(s)

  8 Day(s)

• You can add up to 6 items per a category to the compare list. Compare

  

  Six-Folded Ruler, Stainless Steel, 1 mm Pitch between Vertical Steps

  SHINWASOKUTEI

  [Features]· 1 m scale that folds into 6 pieces for convenient storage and portability.[Specifications]· Material: Stainless Steel

  Measuring Range(mm)	Surface Finish	Scale gradation of the lower level(mm)	Scale gradation of the upper level(mm)	Material	Calibration	JIS	Calibration Certificate
  -	-	-	-	Stainless Steel	-	-	-

  From: 895,528 VND
  Days to Ship: Số ngày giao hàng: 8 Day(s) or more

  8 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Aluminum Ruler, Alusuke (Without Non-Slip Backing)

  SHINWASOKUTEI

  Safe aluminum ruler with easy-to-see large scale numbers and a protective wall to protect your hands.[Features]・ Adopted large and clear scale numbers·The danger prevention wall prevents the cutter blade from slipping and getting over·With grooving ruler·Lightweight, rust-proof and durable[Applications]·For length measurement, line drawing, grooving, cutting

  Measuring Range(mm)	Surface Finish	Scale gradation of the lower level(mm)	Scale gradation of the upper level(mm)	Material	Calibration	JIS	Calibration Certificate
  -	-	-	-	Aluminum	-	-	-

  From: 77,550 VND
  Days to Ship: Số ngày giao hàng: 9 Day(s)

  9 Day(s)

• You can add up to 6 items per a category to the compare list. Compare

  

  Aluminum Cutter Ruler, Lightweight Cutter

  SHINWASOKUTEI

  [Features]· It has a lightweight design and can be easily used by women as well.· Large, vivid scale numerals have been adopted.· Light, non-rusting, and durable.· Comes with slip prevention rubber.· The cutter surface has a thin stainless steel plate pasted on to help ensure that the blades do not catch.· The type with handle uses a thin grip part that is easy to hold even for women with small hands.[Applications]· For measuring length and cutting.· For adhering paper sliding doors and wallpaper.

  Measuring Range(mm)	Surface Finish	Scale gradation of the lower level(mm)	Scale gradation of the upper level(mm)	Material	Calibration	JIS	Calibration Certificate
  -	-	-	-	-	-	-	-

  From: 801,901 VND
  Days to Ship: Số ngày giao hàng: 6 Day(s) or more

  6 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Nobisuke 3x Magnification 2-Direction Measuring Type Metric Scale

  SHINWASOKUTEI

  [Features]· Expands to 3 times the length and can be read close by, enabling long distances to be measured easily with just one person.· The stopper is plastic and will not damage the contacting areas.· Large, easily readable scale numbers are adopted.· 2-Direction Type· As it is telescopic in both directions, it is held in the center. Thus it is particularly suitable for measuring inside dimensions by holding the center and extending the rod left and right.

  Measuring Range(mm)	Surface Finish	Scale gradation of the lower level(mm)	Scale gradation of the upper level(mm)	Material	Calibration	JIS	Calibration Certificate
  364-970 ～ 1424-4091	-	-	-	-	-	-	-

  From: 940,625 VND
  Days to Ship: Số ngày giao hàng: 6 Day(s) or more

  6 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Ruler

  SHINWASOKUTEI

  [Features]· Made of aluminum, sturdy and light. Unlike woodwork, it is unlikely to distort or bend even when exposed to water.· Includes both a meter scale and shaku scale that can be used to minimize dimensional errors that occur during measurement and scribing.· Adopts an easily visible, hard-to-remove scale.· 4-side scale can be used.· Can be split into 2 pieces for convenient portability. A lock mechanism is provided for connection, secured simply by plugging it in.· With double-end rubber cap, no damage is caused to the material.· A durable storage case made of nylon. (With strap)[Applications]· As a measuring stick, for basic ink marking.· As a master for creating disposable rulers.

  Measuring Range(mm)	Surface Finish	Scale gradation of the lower level(mm)	Scale gradation of the upper level(mm)	Material	Calibration	JIS	Calibration Certificate
  -	-	-	-	-	-	-	-

  From: 2,439,275 VND
  Days to Ship: Số ngày giao hàng: 6 Day(s) or more

  6 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Bamboo Ruler

  SHINWASOKUTEI

  [Features]· Made of bamboo which fits the hand well.[Applications]· Carpenters Square: For construction (also used for kimono tailoring in the Tohoku region of Japan).· Cloth measure: For Japanese-style dressmaking.

  Measuring Range(mm)	Surface Finish	Scale gradation of the lower level(mm)	Scale gradation of the upper level(mm)	Material	Calibration	JIS	Calibration Certificate
  -	-	-	-	-	-	-	-

  From: 246,147 VND
  Days to Ship: Số ngày giao hàng: 7 Day(s) or more

  7 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  

  

  

  

  Box Aluminum Ruler

  SHINWASOKUTEI

  Aluminum box beam straight ruler[Features]· Stable box-type that does not wobble and is not susceptible to distortion.· Includes a protective cap.· With tape which can be written on freely. [Applications]· For checking base alignment straightness of window and door frames.

  Measuring Range(mm)	Surface Finish	Scale gradation of the lower level(mm)	Scale gradation of the upper level(mm)	Material	Calibration	JIS	Calibration Certificate
  1350 ～ 1950	-	-	-	-	-	-	-

  From: 1,207,285 VND
  Days to Ship: Số ngày giao hàng: 6 Day(s) or more

  6 Day(s) or more

BrandNhãn hiệu
Product SeriesDòng sản phẩm
From
Days to ShipSố ngày giao hàng
Measuring Range(mm)
Surface Finish
Scale gradation of the lower level(mm)
Scale gradation of the upper level(mm)
Material
Calibration
JIS
Calibration Certificate

	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare
BrandNhãn hiệu	SHINWASOKUTEI	SHINWASOKUTEI	SHINWASOKUTEI	SHINWASOKUTEI	SHINWASOKUTEI	SHINWASOKUTEI	SHINWASOKUTEI	SHINWASOKUTEI	SHINWASOKUTEI	SHINWASOKUTEI	SHINWASOKUTEI	SHINWASOKUTEI	SHINWASOKUTEI	SHINWASOKUTEI	SHINWASOKUTEI	SHINWASOKUTEI	SHINWASOKUTEI	SHINWASOKUTEI	SHINWASOKUTEI	SHINWASOKUTEI	SHINWASOKUTEI	SHINWASOKUTEI	SHINWASOKUTEI	SHINWASOKUTEI	SHINWASOKUTEI	SHINWASOKUTEI	SHINWASOKUTEI	SHINWASOKUTEI	SHINWASOKUTEI	SHINWASOKUTEI
Product SeriesDòng sản phẩm	Stainless Steel Straight Edge Warranty (Product Body and JCSS Calibration Certificate)	Stainless Steel Straight Edge	Ruler Silver	Machine Scale	Narrow Width Carpenter's Square Angle Ruler	Angle Ruler, 1 mm Vertical Pitch	Straight Edge: Angle Ruler (with Stopper)	Pick Up Scale, Silver	Fiber Folding Scale, Measuring Range 1000 mm-2000 mm	Straight Edge: Angle Ruler and Measuring Scale in cm Scale	Cast Iron Ruler Silver cm Display	Aluminum Cutting Ruler Cut Master PROTECT	Narrow Width Carpenter's Square Angle Ruler with Warranty (for Product Base Unit and JCSS Calibration Certificate)	Telescopic Ruler, Measure 1 Direction, Type II	Stopper for Direct Edge,76745	Aluminum Cutter Ruler, Cut Master EX	Aluminum Cutter Ruler, Cut Master EX with Handle	Aluminum Cutter Ruler, with Cutting Rail	Aluminum Cutter Ruler, Cut Master	Aluminum Cutter Ruler, Cut Master with Handle	Nobisuke 3x Magnification 2-Direction Measuring Type Combination Scale	Drafting Tool Triangular Scale	Straight Edge with Product Warranty (Product Body and JCSS Calibration Certificate)	Six-Folded Ruler, Stainless Steel, 1 mm Pitch between Vertical Steps	Aluminum Ruler, Alusuke (Without Non-Slip Backing)	Aluminum Cutter Ruler, Lightweight Cutter	Nobisuke 3x Magnification 2-Direction Measuring Type Metric Scale	Ruler	Bamboo Ruler	Box Aluminum Ruler
From	2,472,375 VND-	90,450 VND-	102,403 VND-	368,428 VND-	128,700 VND Special Price On Sale Till 31/03/2025	754,886 VND	171,600 VND-	55,110 VND-	170,610 VND-	862,602 VND	547,808 VND-	928,995 VND-	3,172,770 VND	964,375 VND-	169,169 VND	736,561 VND-	1,084,256 VND-	1,792,817 VND	778,400 VND-	938,955 VND-	1,315,164 VND-	209,206 VND-	2,640,000 VND-	895,528 VND	77,550 VND-	801,901 VND	940,625 VND-	2,439,275 VND	246,147 VND	1,207,285 VND-
Days to ShipSố ngày giao hàng	8 Day(s)	Same day or more	Same day or more	4 Day(s) or more	Same day or more	4 Day(s) or more	9 Day(s)	9 Day(s)	4 Day(s) or more	8 Day(s) or more	4 Day(s) or more	4 Day(s) or more	9 Day(s) or more	6 Day(s) or more	9 Day(s)	4 Day(s) or more	4 Day(s) or more	4 Day(s) or more	4 Day(s) or more	4 Day(s) or more	6 Day(s) or more	4 Day(s) or more	8 Day(s)	8 Day(s) or more	9 Day(s)	6 Day(s) or more	6 Day(s) or more	6 Day(s) or more	7 Day(s) or more	6 Day(s) or more
Measuring Range(mm)	-	150 ～ 3000	150 ～ 3000	50 ～ 500	300 ～ 1500	600	150 ～ 300	150 ～ 1000	1000 ～ 2000	-	-	1,000 ～ 700	-	461-970 ～ 1078-2821	-	600 ～ 1250	600 ～ 1500	1000	1000 ～ 1500	600 ～ 1500	1909 ～ 3636	-	150 ～ 2000	-	-	-	364-970 ～ 1424-4091	-	-	1350 ～ 1950
Surface Finish	-	Stainless Steel	Silver	-	Silver	Silver	Silver	Silver	-	-	-	-	-	-	-	-	-	-	-	-	-	-	Silver	-	-	-	-	-	-	-
Scale gradation of the lower level(mm)	-	0.5 ～ 1	0.5 ～ 1	-	0.5 ～ 1	1	0.5	1	-	-	-	-	-	-	-	-	-	-	-	-	-	-	0.5 ～ 1	-	-	-	-	-	-	-
Scale gradation of the upper level(mm)	-	1 / 0.5 up to 100 mm, Other: 1	1 / 0.5 up to 100 mm, Other: 1	-	1	1	1	1	-	1	-	-	-	-	-	-	-	-	-	-	-	-	1 / 0.5 up to 100 mm, Other: 1	-	-	-	-	-	-	-
Material	-	Stainless Steel	Stainless Steel	Stainless Steel	Stainless Steel	Stainless Steel	Stainless Steel	Stainless Steel	Resin	-	Stainless Steel	Aluminum	-	-	Brass	Aluminum	Aluminum	Aluminum	Aluminum	Aluminum	Aluminum	Resin	Stainless Steel	Stainless Steel	Aluminum	-	-	-	-	-
Calibration	-	Corresponds To	Corresponds To	-	Corresponds To	-	Corresponds To	Corresponds To	-	-	-	-	-	-	Non-Compatible	-	-	-	-	-	-	-	Corresponds To	-	-	-	-	-	-	-
JIS	-	JIS1 Grade	JIS1 Grade	-	-	JIS1 Grade	JIS1 Grade	JIS1 Grade	-	-	-	-	-	-	-	-	-	-	-	-	-	-	JIS1 Grade	-	-	-	-	-	-	-
Calibration Certificate	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-

Loading...Tải…