(!) Since support from Microsoft will end on January 14th, 2020, Windows 7 will be excluded from the recommended environment from December 15th, 2019 on this site. Vì lý do Microsoft kết thúc hỗ trợ cho Windows 7 vào ngày 14/01/2020, Windows 7 sẽ là hệ điều hành không được khuyến khích sử dụng với trang web này từ ngày 15/12/2019.
Tel: 0222-361-1555
Email: [email protected]
8:00 - 17:00 (Mon - Sat)
Search by Category / Brand Tìm theo danh mục, nhãn hiệu
Search by Category Tìm theo danh mục
- [Thông báo] Cập nhật địa chỉ kho tập kết hàng hóa tại khu vực miền Nam của MISUMI Việt Nam. Xem chi tiết.
[Announcement] Update on warehouse address in the Southern region of MISUIMI Vietnam. See more. - [Cảnh Báo] Thủ Đoạn Lừa Đảo Từ Nhân Viên Giao Hàng – Yêu Cầu Trả Phí Ship. Xem chi tiết.
[Warning] Fraud Calling from Shipper - Asking to Pay Shipping Fee. See more.
DAIWARASHI Adjuster Bolt
Brand |
|
|---|---|
| CAD |
|
| Days to Ship |
|
16 itemsMặt hàng
- Sort By
-
You can add up to 6 items per a category to the compare list.
Adjuster, Rubber Receiver Type D-G/D-GII
DAIWARASHI
An adjuster with a rubber-made base that is also optimal for slip prevention. Note: Please be advised that the model number in VONA has been changed from "D-G II" to "D-G2."[Features]· A rubber cover is used for the entire receiver, and an iron core is included inside.
- CAD ：
- 2D
Thread Length L1(mm) Nominal of Thread M(mm) Type Main Body Height E(mm) Adjusting Bolt Shape Type Body Material Properties Bottom Rubber Material Mounting Shape Type Thread Material Main Body Surface Treatment Swivel Angle θ(deg) Height Adjusting Handle Thread Surface Treatment Swivel Mechanism 100 ～ 150 16 Adjusting Bolt 30 Rubber Foot Type Synthetic Rubber (EPDM Synthetic Rubber) Vibration Control - - Steel Not Provided - Not Provided Trivalent Chromate Not Provided From: 358,620 VND Days to Ship: Số ngày giao hàng: Same day or more 
Same day or more
-
You can add up to 6 items per a category to the compare list.
DAIWARASHI
An adjuster for light vibration-proofing equipped with rubber on the back side of the adjuster base. Note: Please be advised that the model number in VONA has been changed from "D-A III" to "D-A3."[Features]· Since the rubber part comes in contact with the floor, floor damage is prevented.· A light vibration-proof type adjustment bolt.· However, since the rubber hardness is 80°, repulsion is higher than low elasticity rubber and does not demonstrate much of a vibration-proofing effect. For this reason, please compare with other vibration-proof types such as the D-G series when using.· Can easily be mounted using a screwdriver since a Phillips head slot has been provided on the bottom of the bolt.· A nylon washer is used between the receiver and bolt, and rotation is smooth.· The FR type uses non-migratory rubber so traces of rubber do not remain when moving the machinery.· The SI type is white and is characterized by hardly leaving traces of rubber.· Suitable for office equipment, etc.
- CAD ：
- 2D
Thread Length L1(mm) Nominal of Thread M(mm) Type Main Body Height E(mm) Adjusting Bolt Shape Type Body Material Properties Bottom Rubber Material Mounting Shape Type Thread Material Main Body Surface Treatment Swivel Angle θ(deg) Height Adjusting Handle Thread Surface Treatment Swivel Mechanism 50 ～ 200 8 ～ 20 Adjusting Bolt 13 ～ 17 Rubber Foot Type Stainless Steel / Steel Corrosion Resistance / Vibration Control Chloroprene Rubber / Ethylene Propylene Rubber / Silicon - Stainless Steel / Steel Paint / Others - Not Provided Electrostatic Paint / Others Not Provided From: 178,865 VND Days to Ship: Số ngày giao hàng: Same day or more
Same day or more
-
You can add up to 6 items per a category to the compare list.
Adjuster for Heavy Weights D-C/D-C, S
DAIWARASHI
A standard type adjuster for heavy loads[Features]· The receiver is a forged item.· Since it is a mold release surface that has undergone hot forging, unevenness does not stand out, unlike mold casting.· D-C-S has a luxurious feel since the surface of the receiver is grind-processed with a lathe.· Since the receiver is forged, it features a load resistance of 10 tons or more. However, since the screw is buckled first, load resistance depends on the screw diameter.
- CAD ：
- 2D
Thread Length L1(mm) Nominal of Thread M(mm) Type Main Body Height E(mm) Adjusting Bolt Shape Type Body Material Properties Bottom Rubber Material Mounting Shape Type Thread Material Main Body Surface Treatment Swivel Angle θ(deg) Height Adjusting Handle Thread Surface Treatment Swivel Mechanism 50 ～ 200 12 ～ 20 Adjusting Bolt 17 Standard Stainless Steel / Steel Standard / Corrosion Resistance - - Stainless Steel / Steel Trivalent Chromate / Others - Not Provided Trivalent Chromate / Others Not Provided From: 133,375 VND Days to Ship: Số ngày giao hàng: Same day or more
Same day or more
-
You can add up to 6 items per a category to the compare list.
Adjuster for Heavy Loads (Bearing Equipped) D-H
DAIWARASHI
An adjuster for heavy weights with a built-in thrust bearing[Features]· Suitable for the adjustment of heavy machinery.· Stability is outstanding since a large diameter bolt is used.· Smooth adjustments can be made even for non-heavy machinery.
- CAD ：
- 2D
Thread Length L1(mm) Nominal of Thread M(mm) Type Main Body Height E(mm) Adjusting Bolt Shape Type Body Material Properties Bottom Rubber Material Mounting Shape Type Thread Material Main Body Surface Treatment Swivel Angle θ(deg) Height Adjusting Handle Thread Surface Treatment Swivel Mechanism 100 ～ 200 20 ～ 30 Adjusting Bolt 29.5 ～ 36.5 Built-in Bearing Type Stainless Steel / Steel Standard / Corrosion Resistance - - Stainless Steel / Steel Trivalent Chromate / Others - Not Provided Trivalent Chromate / Others Not Provided From: 893,940 VND Days to Ship: Số ngày giao hàng: 4 Day(s) or more
4 Day(s) or more
-
You can add up to 6 items per a category to the compare list.
Standard Receiver Type Adjuster D-A/D-B
DAIWARASHI
The most general standard type adjuster[Features]· The screw shaft rotates and tilts somewhat.· A standard type that can be used as the adjustment bolt for any machinery.· The affordable standard receiver type is recommended when using in large numbers, such as for the legs of a conveyor.· D-A supports screw diameters M16 and M20, and D-B supports screw diameter M12.
- CAD ：
- 2D
Thread Length L1(mm) Nominal of Thread M(mm) Type Main Body Height E(mm) Adjusting Bolt Shape Type Body Material Properties Bottom Rubber Material Mounting Shape Type Thread Material Main Body Surface Treatment Swivel Angle θ(deg) Height Adjusting Handle Thread Surface Treatment Swivel Mechanism 50 ～ 200 12 ～ 20 Adjusting Bolt 15 ～ 18 Standard Stainless Steel / Steel Standard / Corrosion Resistance - - Stainless Steel / Steel Trivalent Chromate / Others - Not Provided Trivalent Chromate / Others Not Provided From: 126,766 VND Days to Ship: Số ngày giao hàng: 4 Day(s) or more
4 Day(s) or more
-
You can add up to 6 items per a category to the compare list.
Adjuster, Anchor Fixing, With Non-Shake Thread Section, D-J-EII
DAIWARASHI
An adjuster for anchor fixing in which the horizontal shaking of the screw shaft part is completely locked. Note: Please be advised that the model number in VONA has been changed from "D-J-E II" to "D-J-E2."[Features]· The structure is such that some space exists between the receiver and bolt.· This is the result of our efforts to enable bolts to move smoothly even if the floor surface is somewhat tilted.· It has been pointed out in the past that this may cause bolt looseness to occur when the upper portion of a conveyor vibrates, possibly resulting in significant machinery movement caused by shaking when the conveyor stops.· It is for this reason that we came up with the D-J type, which is suitable for use when the top portion of machinery such as a conveyor vibrates and moves slightly.· Even when a running machine is stopped, the bolts will not move and falling over will not occur.
- CAD ：
- 2D
Thread Length L1(mm) Nominal of Thread M(mm) Type Main Body Height E(mm) Adjusting Bolt Shape Type Body Material Properties Bottom Rubber Material Mounting Shape Type Thread Material Main Body Surface Treatment Swivel Angle θ(deg) Height Adjusting Handle Thread Surface Treatment Swivel Mechanism 50 ～ 180 12 ～ 16 Adjusting Bolt 17 Rubber Foot & Anchor Bolt Fixing Type Stainless Steel / Steel Corrosion Resistance / Vibration Control - - Stainless Steel / Steel Trivalent Chromate / Others - Not Provided Trivalent Chromate / Others Not Provided From: 236,530 VND Days to Ship: Số ngày giao hàng: 4 Day(s) or more
4 Day(s) or more
-
You can add up to 6 items per a category to the compare list.
Standard Receiver Adjuster With Plastic D-AII/D-BII
DAIWARASHI
A standard type adjuster with plastic that does not damage the floor. Note: Please be advised that the model number in VONA has been changed from "D-A II" to "D-A2."[Features]· Does not stain or damage floors since a special plastic is molded into the receiver.· The plastic part has elasticity, feels good to touch, and features excellent aging resistance and temperature resistance.· Suitable for any machinery or office equipment since the external appearance also features a beautiful finish.
- CAD ：
- 2D
Thread Length L1(mm) Nominal of Thread M(mm) Type Main Body Height E(mm) Adjusting Bolt Shape Type Body Material Properties Bottom Rubber Material Mounting Shape Type Thread Material Main Body Surface Treatment Swivel Angle θ(deg) Height Adjusting Handle Thread Surface Treatment Swivel Mechanism 75 ～ 200 12 ～ 16 Adjusting Bolt 18 ～ 22 Standard Stainless Steel / Steel Standard / Corrosion Resistance ABS Resin - Stainless Steel / Steel Trivalent Chromate / Others - Not Provided Trivalent Chromate / Others Not Provided From: 219,306 VND Days to Ship: Số ngày giao hàng: 4 Day(s) or more
4 Day(s) or more
-
You can add up to 6 items per a category to the compare list.
Adjuster for Anchor Fixing D-EII/D-EII-ST
DAIWARASHI
A standard item adjuster bolt for anchor fixing. Note: Please be advised that the model number in VONA has been changed from "D-E II" to "D-E2."[Features]· Similar to D-A, it is structured so that fixing of the receiver and bolt is performed by placing the bolt protrusion into the receiver and pressing a nut into it.· Can easily be fixed using an anchor bolt.· Please use an anchor bolt.· Please use a 12 mm anchor bolt.· Bolts shorter than 12 × 70 are not recommended for complete fixing due to safety concerns.· Note: The screw rotates and tilts somewhat.
- CAD ：
- 2D
Thread Length L1(mm) Nominal of Thread M(mm) Type Main Body Height E(mm) Adjusting Bolt Shape Type Body Material Properties Bottom Rubber Material Mounting Shape Type Thread Material Main Body Surface Treatment Swivel Angle θ(deg) Height Adjusting Handle Thread Surface Treatment Swivel Mechanism 50 ～ 200 12 ～ 20 Adjusting Bolt 17 ～ 19 Rubber Foot & Anchor Bolt Fixing Type Stainless Steel / Steel Standard / Corrosion Resistance / Vibration Control - - Stainless Steel / Steel Trivalent Chromate / Others - Not Provided Trivalent Chromate / Others Not Provided From: 241,766 VND Days to Ship: Số ngày giao hàng: 4 Day(s) or more
4 Day(s) or more
-
You can add up to 6 items per a category to the compare list.
Adjuster with Rubber for Heavy Weights (Bearings Mounted), D-H-R
DAIWARASHI
An adjuster equipped with rubber for medium loads featuring a built-in thrust bearing.[Features]· Since the receiver features a chloroprene rubber coating, there is no need to worry about it falling off, enabling it to be used with confidence.· Groove processing is applied to the rear surface of the rubber to make it non-slippery.· Effectively protects floors.
- CAD ：
- 2D
Thread Length L1(mm) Nominal of Thread M(mm) Type Main Body Height E(mm) Adjusting Bolt Shape Type Body Material Properties Bottom Rubber Material Mounting Shape Type Thread Material Main Body Surface Treatment Swivel Angle θ(deg) Height Adjusting Handle Thread Surface Treatment Swivel Mechanism 150 24 Adjusting Bolt 37 Built-in Bearing Type Steel Standard Chloroprene Rubber - Steel Trivalent Chromate - Not Provided Trivalent Chromate Not Provided From: 1,122,070 VND Days to Ship: Số ngày giao hàng: 4 Day(s) or more
4 Day(s) or more
-
You can add up to 6 items per a category to the compare list.
Adjuster for Anchor Fixing (Large Pedestal Type) D-E-W
DAIWARASHI
A medium load type adjuster for anchor fixing in which the base is wide and stable[Features]· By increasing the size and thickness of the pedestal part, the stability after installation and the resistance horizontal shaking of the anchor fixing part have been improved.· Note: The screw shaft tilts somewhat
- CAD ：
- 2D
Thread Length L1(mm) Nominal of Thread M(mm) Type Main Body Height E(mm) Adjusting Bolt Shape Type Body Material Properties Bottom Rubber Material Mounting Shape Type Thread Material Main Body Surface Treatment Swivel Angle θ(deg) Height Adjusting Handle Thread Surface Treatment Swivel Mechanism 130 ～ 150 16 Adjusting Bolt 19 Rubber Foot & Anchor Bolt Fixing Type Steel Standard - - Steel Trivalent Chromate - Not Provided Trivalent Chromate Not Provided From: 415,413 VND Days to Ship: Số ngày giao hàng: 4 Day(s) or more
4 Day(s) or more
-
You can add up to 6 items per a category to the compare list.
Adjuster for Heavy Weight, With Rubber D-C-R
DAIWARASHI
A rubber equipped type adjuster for medium loads[Features]· Receiver features a chloroprene rubber coating.
- CAD ：
- 2D
Thread Length L1(mm) Nominal of Thread M(mm) Type Main Body Height E(mm) Adjusting Bolt Shape Type Body Material Properties Bottom Rubber Material Mounting Shape Type Thread Material Main Body Surface Treatment Swivel Angle θ(deg) Height Adjusting Handle Thread Surface Treatment Swivel Mechanism 50 ～ 200 12 ～ 20 Adjusting Bolt 22 Rubber Foot Type Stainless Steel / Steel Standard / Corrosion Resistance Chloroprene Rubber - Stainless Steel / Steel Trivalent Chromate / Others - Not Provided Trivalent Chromate / Others Not Provided From: 213,440 VND Days to Ship: Số ngày giao hàng: 4 Day(s) or more
4 Day(s) or more
-
You can add up to 6 items per a category to the compare list.
Adjuster for Heavy Weights (Long Screw Type), D-C-L/D-C-L and S
DAIWARASHI
A long screw adjuster with a wide adjustment range[Features]· Although the dimensions in the table are in increments of 50 mm, dimensions can be cut as desired upon request.A limited quantity of 500 mm total length products are available for M16 and M20.· D-C-LS has a luxurious feel since the surface of the receiver is grind-processed with a lathe.
- CAD ：
- 2D
Thread Length L1(mm) Nominal of Thread M(mm) Type Main Body Height E(mm) Adjusting Bolt Shape Type Body Material Properties Bottom Rubber Material Mounting Shape Type Thread Material Main Body Surface Treatment Swivel Angle θ(deg) Height Adjusting Handle Thread Surface Treatment Swivel Mechanism 200 ～ 300 12 ～ 24 Adjusting Bolt 17 ～ 22 Standard Stainless Steel / Cast Iron Standard / Corrosion Resistance - - Stainless Steel / Steel Trivalent Chromate / Others - Not Provided Trivalent Chromate / Others Not Provided From: 296,260 VND Days to Ship: Số ngày giao hàng: 4 Day(s) or more
4 Day(s) or more
-
You can add up to 6 items per a category to the compare list.
Adjuster for Heavy Weights (Wide Base Plate Type), D-CIII/D-CIII and S/D-CIII-W
DAIWARASHI
A wide base type adjuster for heavy weights that is stable and that can distribute the load to the floor. Note: Please be advised that the model number in VONA has been changed from "D-C III" to "D-C3."[Features]· The receiver of the stainless steel D-C III is a forged item.· D-C III S has a luxurious feel since the surface of the receiver is grind-processed with a lathe.
- CAD ：
- 2D
Thread Length L1(mm) Nominal of Thread M(mm) Type Main Body Height E(mm) Adjusting Bolt Shape Type Body Material Properties Bottom Rubber Material Mounting Shape Type Thread Material Main Body Surface Treatment Swivel Angle θ(deg) Height Adjusting Handle Thread Surface Treatment Swivel Mechanism 100 ～ 200 16 ～ 30 Adjusting Bolt 22 ～ 23 Standard Stainless Steel / Cast Iron Standard / Corrosion Resistance - - Stainless Steel / Steel Trivalent Chromate / Others - Not Provided Trivalent Chromate / Others Not Provided From: 345,480 VND Days to Ship: Số ngày giao hàng: 4 Day(s) or more
4 Day(s) or more
-
You can add up to 6 items per a category to the compare list.
Adjuster, Standard Receiver, Small Diameter Type D-F/D-F-C
DAIWARASHI
An adjuster whose screw and base have small diameters[Features]· Similar to the D-A and D-B types, it is structured so that a nut is pressed into the bolt protrusion inside the receiver, eliminating worries regarding the receiver falling off.· Manufactured to enable some play between the screw part and receiver, enabling its use on surfaces with a slight slope.· A light load type with a receiver diameter that is also small.· Thanks to the plastic coating on the outer circumference of the receiver, floors are not stained or damaged.
- CAD ：
- 2D
Thread Length L1(mm) Nominal of Thread M(mm) Type Main Body Height E(mm) Adjusting Bolt Shape Type Body Material Properties Bottom Rubber Material Mounting Shape Type Thread Material Main Body Surface Treatment Swivel Angle θ(deg) Height Adjusting Handle Thread Surface Treatment Swivel Mechanism 50 ～ 100 8 ～ 10 Adjusting Bolt 12.5 ～ 13.5 Standard Stainless Steel / Steel Standard / Corrosion Resistance ABS Resin - Stainless Steel / Steel Trivalent Chromate / Others - Not Provided Trivalent Chromate / Others Not Provided From: 57,048 VND Days to Ship: Số ngày giao hàng: 4 Day(s) or more
4 Day(s) or more
-
You can add up to 6 items per a category to the compare list.
Standard Receiver Adjuster, Space Saving Type D-B50/D-A60/D-A65
DAIWARASHI
A standard type adjuster in which the adjuster base is compact[Features]· An adjuster whose pedestal part is a compact type.· The screw rotates and tilts somewhat.· Since the receiver diameter is designed to be smaller than D-A/D-B, it is useful for saving space.
- CAD ：
- 2D
Thread Length L1(mm) Nominal of Thread M(mm) Type Main Body Height E(mm) Adjusting Bolt Shape Type Body Material Properties Bottom Rubber Material Mounting Shape Type Thread Material Main Body Surface Treatment Swivel Angle θ(deg) Height Adjusting Handle Thread Surface Treatment Swivel Mechanism 75 ～ 120 12 Adjusting Bolt 14 Standard Steel Standard - - Steel Bright Chromate Plating - Not Provided Bright Chromate Plating Not Provided From: 147,040 VND Days to Ship: Số ngày giao hàng: 4 Day(s) or more
4 Day(s) or more
-
You can add up to 6 items per a category to the compare list.
DAIWARASHI
A base cut type adjuster that does not protrude from the upper part and that prevents interference with other parts. Note: Please be advised that the model number in VONA has been changed from "D-D I" to "D-D1."[Features]· A special adjuster for walls.· Please use together with D-D II.· Please use accessories such as hex nuts, etc.· The portion that makes contact with the wall is folded.· As a result, the structure features a load resistance that is dramatically higher than products from other manufacturers in which the receiver is cut.· In terms of its relation to the wall surface, the bolt hole has undergone special machining different from that of normal catch plates.· Please refer to the drawings for use.
- CAD ：
- 2D
Thread Length L1(mm) Nominal of Thread M(mm) Type Main Body Height E(mm) Adjusting Bolt Shape Type Body Material Properties Bottom Rubber Material Mounting Shape Type Thread Material Main Body Surface Treatment Swivel Angle θ(deg) Height Adjusting Handle Thread Surface Treatment Swivel Mechanism 75 ～ 150 12 ～ 16 Adjusting Bolt 14 ～ 18 Anchor Bolt Mounting Type Stainless Steel / Steel Standard / Corrosion Resistance - - Stainless Steel / Steel Trivalent Chromate / Others - Not Provided Trivalent Chromate / Others Not Provided From: 187,285 VND Days to Ship: Số ngày giao hàng: 4 Day(s) or more
4 Day(s) or more
| BrandNhãn hiệu |
|---|
| Product SeriesDòng sản phẩm |
| CADCAD |
| From |
| Days to ShipSố ngày giao hàng |
| Thread Length L1(mm) |
| Nominal of Thread M(mm) |
| Type |
| Main Body Height E(mm) |
| Adjusting Bolt Shape Type |
| Body Material |
| Properties |
| Bottom Rubber Material |
| Mounting Shape Type |
| Thread Material |
| Main Body Surface Treatment |
| Swivel Angle θ(deg) |
| Height Adjusting Handle |
| Thread Surface Treatment |
| Swivel Mechanism |
You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.    | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | |
| BrandNhãn hiệu | DAIWARASHI | DAIWARASHI | DAIWARASHI | DAIWARASHI | DAIWARASHI | DAIWARASHI | DAIWARASHI | DAIWARASHI | DAIWARASHI | DAIWARASHI | DAIWARASHI | DAIWARASHI | DAIWARASHI | DAIWARASHI | DAIWARASHI | DAIWARASHI |
| Product SeriesDòng sản phẩm | Adjuster, Anchor Fixing, With Non-Shake Thread Section, D-J-EII | Adjuster with Rubber for Heavy Weights (Bearings Mounted), D-H-R | Adjuster for Heavy Weights (Long Screw Type), D-C-L/D-C-L and S | Adjuster for Heavy Weights (Wide Base Plate Type), D-CIII/D-CIII and S/D-CIII-W | Standard Receiver Adjuster, Space Saving Type D-B50/D-A60/D-A65 | |||||||||||
| CADCAD |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| From | 358,620 VND- | 178,865 VND- | 133,375 VND- | 893,940 VND- | 126,766 VND- | 236,530 VND- | 219,306 VND- | 241,766 VND- | 1,122,070 VND | 415,413 VND- | 213,440 VND- | 296,260 VND- | 345,480 VND- | 57,048 VND- | 147,040 VND- | 187,285 VND- |
| Days to ShipSố ngày giao hàng | Same day or more | Same day or more | Same day or more | 4 Day(s) or more | 4 Day(s) or more | 4 Day(s) or more | 4 Day(s) or more | 4 Day(s) or more | 4 Day(s) or more | 4 Day(s) or more | 4 Day(s) or more | 4 Day(s) or more | 4 Day(s) or more | 4 Day(s) or more | 4 Day(s) or more | 4 Day(s) or more |
| Thread Length L1(mm) | 100 ～ 150 | 50 ～ 200 | 50 ～ 200 | 100 ～ 200 | 50 ～ 200 | 50 ～ 180 | 75 ～ 200 | 50 ～ 200 | 150 | 130 ～ 150 | 50 ～ 200 | 200 ～ 300 | 100 ～ 200 | 50 ～ 100 | 75 ～ 120 | 75 ～ 150 |
| Nominal of Thread M(mm) | 16 | 8 ～ 20 | 12 ～ 20 | 20 ～ 30 | 12 ～ 20 | 12 ～ 16 | 12 ～ 16 | 12 ～ 20 | 24 | 16 | 12 ～ 20 | 12 ～ 24 | 16 ～ 30 | 8 ～ 10 | 12 | 12 ～ 16 |
| Type | Adjusting Bolt | Adjusting Bolt | Adjusting Bolt | Adjusting Bolt | Adjusting Bolt | Adjusting Bolt | Adjusting Bolt | Adjusting Bolt | Adjusting Bolt | Adjusting Bolt | Adjusting Bolt | Adjusting Bolt | Adjusting Bolt | Adjusting Bolt | Adjusting Bolt | Adjusting Bolt |
| Main Body Height E(mm) | 30 | 13 ～ 17 | 17 | 29.5 ～ 36.5 | 15 ～ 18 | 17 | 18 ～ 22 | 17 ～ 19 | 37 | 19 | 22 | 17 ～ 22 | 22 ～ 23 | 12.5 ～ 13.5 | 14 | 14 ～ 18 |
| Adjusting Bolt Shape Type | Rubber Foot Type | Rubber Foot Type | Standard | Built-in Bearing Type | Standard | Rubber Foot & Anchor Bolt Fixing Type | Standard | Rubber Foot & Anchor Bolt Fixing Type | Built-in Bearing Type | Rubber Foot & Anchor Bolt Fixing Type | Rubber Foot Type | Standard | Standard | Standard | Standard | Anchor Bolt Mounting Type |
| Body Material | Synthetic Rubber (EPDM Synthetic Rubber) | Stainless Steel / Steel | Stainless Steel / Steel | Stainless Steel / Steel | Stainless Steel / Steel | Stainless Steel / Steel | Stainless Steel / Steel | Stainless Steel / Steel | Steel | Steel | Stainless Steel / Steel | Stainless Steel / Cast Iron | Stainless Steel / Cast Iron | Stainless Steel / Steel | Steel | Stainless Steel / Steel |
| Properties | Vibration Control | Corrosion Resistance / Vibration Control | Standard / Corrosion Resistance | Standard / Corrosion Resistance | Standard / Corrosion Resistance | Corrosion Resistance / Vibration Control | Standard / Corrosion Resistance | Standard / Corrosion Resistance / Vibration Control | Standard | Standard | Standard / Corrosion Resistance | Standard / Corrosion Resistance | Standard / Corrosion Resistance | Standard / Corrosion Resistance | Standard | Standard / Corrosion Resistance |
| Bottom Rubber Material | - | Chloroprene Rubber / Ethylene Propylene Rubber / Silicon | - | - | - | - | ABS Resin | - | Chloroprene Rubber | - | Chloroprene Rubber | - | - | ABS Resin | - | - |
| Mounting Shape Type | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - |
| Thread Material | Steel | Stainless Steel / Steel | Stainless Steel / Steel | Stainless Steel / Steel | Stainless Steel / Steel | Stainless Steel / Steel | Stainless Steel / Steel | Stainless Steel / Steel | Steel | Steel | Stainless Steel / Steel | Stainless Steel / Steel | Stainless Steel / Steel | Stainless Steel / Steel | Steel | Stainless Steel / Steel |
| Main Body Surface Treatment | Not Provided | Paint / Others | Trivalent Chromate / Others | Trivalent Chromate / Others | Trivalent Chromate / Others | Trivalent Chromate / Others | Trivalent Chromate / Others | Trivalent Chromate / Others | Trivalent Chromate | Trivalent Chromate | Trivalent Chromate / Others | Trivalent Chromate / Others | Trivalent Chromate / Others | Trivalent Chromate / Others | Bright Chromate Plating | Trivalent Chromate / Others |
| Swivel Angle θ(deg) | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - |
| Height Adjusting Handle | Not Provided | Not Provided | Not Provided | Not Provided | Not Provided | Not Provided | Not Provided | Not Provided | Not Provided | Not Provided | Not Provided | Not Provided | Not Provided | Not Provided | Not Provided | Not Provided |
| Thread Surface Treatment | Trivalent Chromate | Electrostatic Paint / Others | Trivalent Chromate / Others | Trivalent Chromate / Others | Trivalent Chromate / Others | Trivalent Chromate / Others | Trivalent Chromate / Others | Trivalent Chromate / Others | Trivalent Chromate | Trivalent Chromate | Trivalent Chromate / Others | Trivalent Chromate / Others | Trivalent Chromate / Others | Trivalent Chromate / Others | Bright Chromate Plating | Trivalent Chromate / Others |
| Swivel Mechanism | Not Provided | Not Provided | Not Provided | Not Provided | Not Provided | Not Provided | Not Provided | Not Provided | Not Provided | Not Provided | Not Provided | Not Provided | Not Provided | Not Provided | Not Provided | Not Provided |
Loading...Tải…
ConfigureTạo
Specification/DimensionsĐặc điểm kỹ thuật / Kích thướcĐặc điểm kỹ thuật / Kích thước
-
Thread Length L1(mm)
- 9
- 11.5
- 11.6
- 14
- 16
- 17
- 17.5
- 18
- 19
- 19.5
- 20
- 21
- 21.5
- 22
- 23
- 24
- 25
- 25.5
- 26
- 26.5
- 27
- 27.5
- 28
- 28.5
- 29
- 29.5
- 30
- 31
- 31.5
- 32
- 33
- 34
- 35
- 36
- 36.5
- 38
- 39.5
- 40
- 41
- 42
- 43
- 45
- 49.5
- 050
- 50
- 51
- 51.5
- 52
- 52.5
- 53
- 54
- 56
- 58
- 59.5
- 60
- 61
- 62
- 63
- 65
- 66
- 67.5
- 68
- 69.5
- 70
- 71
- 71.5
- 72
- 73
- 075
- 75
- 78
- 80
- 85
- 90
- 91
- 95
- 98
- 99.5
- 100
- 101.5
- 108
- 110
- 114
- 115
- 117.5
- 120
- 122
- 124
- 125
- 126
- 127
- 129
- 130
- 132
- 132.5
- 135.5
- 136
- 138
- 142
- 144
- 145
- 148
- 150
- 154
- 155
- 156
- 157
- 158
- 159
- 160
- 162
- 162.5
- 165.5
- 168
- 170
- 172
- 174
- 175
- 176
- 177
- 179
- 180
- 182
- 182.5
- 184
- 185.5
- 186
- 198
- 200
- 206
- 207
- 209
- 210
- 212
- 212.5
- 215.5
- 220
- 250
- 280
- 300
- 1125
-
Nominal of Thread M(mm)
-
Type
- Adjusting Bolt
- Mounting
- Precision Instrument
- Others
- Adjusting Screw with Rubber Grommet
-
Main Body Height E(mm)
- 4
- 5
- 5.4
- 6
- 7
- 8
- 8.5
- 9
- 9.5
- 9.7
- 9.8
- 10
- 10.5
- 11
- 11.2
- 11.5
- 12
- 12.5
- 13
- 13.5
- 13.7
- 14
- 14.5
- 15
- 15.5
- 16
- 16.5
- 17
- 17.5
- 17.7
- 18
- 18.5
- 19
- 20
- 20.5
- 20.7
- 21
- 21.5
- 22
- 22.5
- 23
- 23.5
- 24
- 24.5
- 25
- 26
- 27
- 27.5
- 28
- 28.2
- 29
- 29.5
- 30
- 30.5
- 31
- 31.5
- 32
- 32.5
- 33
- 33.2
- 34
- 34.5
- 35
- 35.4
- 35.5
- 36
- 36.5
- 37
- 37.5
- 39
- 40
- 41
- 42
- 42.5
- 43
- 44
- 44.5
- 45
- 46
- 46.5
- 47
- 48.5
- 50
- 51
- 52
- 53
- 54
- 55
- 55.5
- 56
- 60
- 60.5
- 61
- 62
- 62.5
- 63
- 64
- 64.5
- 65
- 65.5
- 66
- 67
- 67.5
- 69
- 70
- 70.5
- 71
- 72
- 73
- 75
- 76
- 76.5
- 77
- 77.5
- 78.5
- 79
- 79.5
- 80
- 81
- 82.5
- 83
- 83.5
- 84.5
- 85
- 85.5
- 91
- 92
- 93
- 94
- 95
- 97
- 99.5
- 100
- 101
- 101.5
- 102.5
- 104
- 105
- 106.5
- 107
- 108
- 109
- 109.5
- 110
- 111
- 112
- 112.5
- 113.5
- 114.5
- 115
- 116
- 117
- 117.5
- 119
- 119.5
- 121
- 122.5
- 123
- 125
- 126
- 127
- 128
- 129
- 130
- 131
- 132
- 133
- 134
- 135
- 136
- 137
- 138
- 139
- 140
- 140.5
- 142
- 143
- 144
- 145
- 148
- 149
- 150
- 151
- 152
- 153
- 154
- 154.5
- 155
- 156
- 157
- 158
- 159
- 160
- 160.5
- 161
- 162
- 163
- 163.5
- 165
- 168
- 170
- 173
- 175
- 176
- 177
- 178
- 179
- 180
- 181
- 182
- 183
- 184
- 184.5
- 185
- 186
- 186.5
- 187
- 188
- 189
- 190
- 190.5
- 192
- 193
- 193.5
- 195
- 195.5
- 198
- 200
- 207
- 208
- 210
- 211
- 214
- 216.5
- 217
- 220
- 222
- 225
- 225.5
- 227
- 228
- 230
- 231
- 232
- 234
- 234.5
- 235
- 236
- 236.5
- 237
- 238
- 240
- 242
- 243
- 243.5
- 245
- 245.5
- 248
- 250
- 281
- 400
-
Adjusting Bolt Shape Type
-
Body Material
-
Properties
- Standard
- Corrosion Resistance
- Oil Resistance
- Chemical Resistance
- Heat Resistance
- Vibration Control
- Impact Resistance
- Electrical Conductivity
-
Bottom Rubber Material
-
Mounting Shape Type
-
Thread Material
-
Main Body Surface Treatment
-
Swivel Angle θ(deg)
-
Height Adjusting Handle
-
Thread Surface Treatment
-
Swivel Mechanism
Related Categories to Adjuster BoltDanh mục liên quan đến Adjuster Bolt
FAQ Adjuster Bolt
- Question: Can Adjuster Bolt be used for heavy-duty applications?
- Answer: Yes, Adjuster Bolt can be used for heavy-duty applications. They are designed to support and level heavy machinery, equipment, and furniture. By allowing easy adjustments, they ensure stability and safety on uneven surfaces, making them suitable for heavy-duty tasks.
- Question: What are the common material and uses of an adjuster?
- Answer: Common materials for Adjuster Bolt include metal (such as steel or stainless steel) and high-strength plastics. They are used in various applications, like leveling heavy machinery, workbenches, and furniture. Adjuster Bolts provide easy height adjustments and stability, making them essential for aligning and supporting equipment on uneven surfaces.
- Question: How to install adjuster?
- Answer: To install an adjuster, follow these steps:
1. Clean the equipment's base or legs to remove dirt and debris.
2. Position the adjuster under each leg or corner of the equipment.
3. Use a wrench or hand tool to turn the adjuster clockwise to raise it to the desired height.
4. Ensure all Adjuster Bolt are evenly adjusted for stability.
5. Test the equipment to confirm it is level and secure. Adjust as needed. - Question: How can I determine the right size of an adjuster for my project?
- Answer: To find the right size of an adjuster for your project, do the following:
1. Measure the diameter of your equipment's legs or base.
2. Check how much weight the adjuster needs to support.
3. Choose an adjuster with the same diameter and enough weight capacity.
4. Make sure the adjuster's height range fits your needs.
5. Read the specifications to ensure it matches your equipment. - Question: How can I measure the torque on an adjuster?
- Answer: To measure torque on an adjuster, use a torque wrench. Set the desired torque value on the wrench, position it on the adjuster's nut or bolt, and apply force. As you turn the wrench, it displays the torque value. Stop when you reach the required torque. Proper torque ensures the adjuster is tightened correctly and prevents damage or instability. Follow the manufacturer's recommendations for the right torque values.
How can we improve?
How can we improve?
While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
Customer Privacy Policy
Thank you for your cooperation.
While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
Please use the inquiry form.
Customer Privacy Policy