Dial Gauges（Scale type：Balance Scale）

• You can add up to 6 items per a category to the compare list. Compare

  

  Dial Gauge SERIES 2 - Standard Type, 0.01mm And 0.001 Graduation

  MITUTOYO

  • Standard 0.01mm graduation dial gauges having a bezel with an outside diameter of 57 mm.All types come with limit markers and a bezel clamp as standard.• The bezel clamp and lifting lever (optional) can be attached to either the right or leftside.These parts can be easily installed and removed without tools.• Secure adhesion between the bezel and crystal as well as the use of an O-ringprevents water or oil penetration.• The spindle is made of high-strength quench hardened stainless steel suitable for heavy duty use.• A carbide contact point is used.• The grand gear is made of stainless steel with high resistance to wear and deformation.• Application of a hard coating on the surface of the crystal makesthe gauge highly scratch and chemical-resistant.

  Application	Scale interval minimal display(mm)	Display Method	Maximum Measurement Length (Range Selection)(mm)	Waterproof Function	Output terminal for measuring data: with or without	Scale type	Calibration Certificate
  Standard Type	0.001 ～ 0.01	Dial	1.1 to 5 ～ 6~20	NA	NA	Balance Scale	-

  Days to Ship: Số ngày giao hàng: Quote

  Quote

• You can add up to 6 items per a category to the compare list. Compare

  

  

  

  Dial Gauge, Pictest (Switch Lever Type, PC Series)

  OZAKI MFG (PEACOCK)

  [Features]· Lever-type dial gauge with switch lever.· Miniature bearings are used for the bearings of the fulcrum portion of the gauge heads to reduce the effects of rod play and achieve excellent indicating stability.· With an O-ring used to prevent ingress of water or oil from the gap between the external and internal frames, it features excellent waterproofing.· The gauge damage prevention probe is provided on all models.· By adopting a balancing needle, errors due to difference in posture (gauge mounting direction) are minimized.

  Application	Scale interval minimal display(mm)	Display Method	Maximum Measurement Length (Range Selection)(mm)	Waterproof Function	Output terminal for measuring data: with or without	Scale type	Calibration Certificate
  Lever Type (Indicator)	0.002 ～ 0.01	Dial	0–1	Available	-	Balance Scale	-

  From: 2,477,289 VND
  Days to Ship: Số ngày giao hàng: 4 Day(s) or more

  4 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Dial Gauge, New Pic-test (No Clutch Type, PCN Type)

  OZAKI MFG (PEACOCK)

  [Features]· No-latch type with a lever-type dial gauge lacking the most general switching lever.· The pointer continually rotates clockwise in accordance with the upward and downward movement of the gauge head, improving measurement efficiency for a wide range of applications.· Select from 0.01 mm, 0.002 mm, or 0.001 mm types.· Miniature bearings are used for the bearings of the fulcrum portion of the gauge heads to reduce the effects of rod play and achieve excellent indicating stability.· With an O-ring used to prevent ingress of water or oil from the gap between the external and internal frames, it features excellent waterproofing.

  Application	Scale interval minimal display(mm)	Display Method	Maximum Measurement Length (Range Selection)(mm)	Waterproof Function	Output terminal for measuring data: with or without	Scale type	Calibration Certificate
  Lever Type (Indicator)	0.001 ～ 0.01	Dial	0–1 ～ 1.1 to 5	Available	-	Balance Scale	-

  From: 2,901,810 VND
  Days to Ship: Số ngày giao hàng: 4 Day(s) or more

  4 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Standard Shaped Dial Gauge (Scale Interval: 0.001 mm)

  OZAKI MFG (PEACOCK)

  The most widely used dial gauge with scale intervals of 0.001/0.005 mm. Select from a wide range of devices to suit the application.[Features]· With an O-ring used to prevent ingress of water or oil from the gap between the external and internal frames, it features excellent waterproofing.· By using SK hardened steel, the stem possesses a high strength that is resilient even for severe use.· Gears are protected from sudden upward pressure from the spindle by the shock proofing mechanism.· Limit stickers are included as standard with all models.

  Application	Scale interval minimal display(mm)	Display Method	Maximum Measurement Length (Range Selection)(mm)	Waterproof Function	Output terminal for measuring data: with or without	Scale type	Calibration Certificate
  Standard Type	0.001	Dial	0–1 ～ 1.1 to 5	Available	-	Balance Scale	-

  From: 2,704,500 VND
  Days to Ship: Số ngày giao hàng: 6 Day(s) or more

  6 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  New Pic Test for Low Pressure (E Series)

  OZAKI MFG (PEACOCK)

  [Features]· Lever-type dial gauge with super low pressure measuring force (0.05 N / 0.1 N).· No-clutch type (PCN) and switching lever type (PC) are available as a selection of 0.01 mm or 0.002 mm options.· Uses a green scale plate that is easy on the eyes.· Highly sensitive, enabling measurement at low measurement power.· The gauge damage prevention probe is provided on all models.· By adopting a balancing needle, errors due to difference in posture (gauge mounting direction) are minimized.· Try it out if you are having trouble with errors due to the effects of measuring force

  Application	Scale interval minimal display(mm)	Display Method	Maximum Measurement Length (Range Selection)(mm)	Waterproof Function	Output terminal for measuring data: with or without	Scale type	Calibration Certificate
  Lever Type (Indicator)	0.002 ～ 0.01	Dial	0–1	-	-	Balance Scale	-

  From: 3,096,759 VND
  Days to Ship: Số ngày giao hàng: 4 Day(s) or more

  4 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Small Dial Gauge 1 Series, Outer Frame Diameter φ31 mm, φ36 mm, φ40 mm Type

  MITUTOYO

  Dial gauge with a compact design. Does not take up space when attached to jigs.

  Application	Scale interval minimal display(mm)	Display Method	Maximum Measurement Length (Range Selection)(mm)	Waterproof Function	Output terminal for measuring data: with or without	Scale type	Calibration Certificate
  Standard Type	0.002 ～ 0.01	Dial	0–1 ～ 1.1 to 5	NA	NA	Balance Scale	-

  Days to Ship: Số ngày giao hàng: Quote

  Quote

• You can add up to 6 items per a category to the compare list. Compare

  

  

  

  Lever Type Dial Gauge

  MAHR

  [Features]· Fixing bracket (shank) removable structure allows the position to be freely changed.· Wear-resistant artificial gems are used for the entire internal shaft.· There are 2 mounting shafts, 6 mm and 8 mm, which can be removed.· Vibration-proof structure.· A structure in which the pointer's cover glass can be removed, eliminating time spent repairing any damage to the glass.· Fixing bracket (shank) removable structure enables work that originally required multiple units to be done with a single unit, making it highly economical.[Applications]· General molding industry.· Research and development work.

  Application	Scale interval minimal display(mm)	Display Method	Maximum Measurement Length (Range Selection)(mm)	Waterproof Function	Output terminal for measuring data: with or without	Scale type	Calibration Certificate
  Lever Type (Indicator)	0.002 ～ 0.01	Dial	0–1	-	-	Balance Scale	-

  From: 3,242,725 VND
  Days to Ship: Số ngày giao hàng: 6 Day(s) or more

  6 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Regular Dial Gauge 2 Series, Under 1 Turn Type

  MITUTOYO

  It is excellent in durability and impact resistance as it adopts Mitsutoyo's unique shock proof mechanism which uses cushioning mechanism. Dial gauge developed to prevent reading errors during multiple rotations.

  Application	Scale interval minimal display(mm)	Display Method	Maximum Measurement Length (Range Selection)(mm)	Waterproof Function	Output terminal for measuring data: with or without	Scale type	Calibration Certificate
  Standard Type	0.001 ～ 0.1	Dial	0–1 ～ 1.1 to 5	NA	NA	Balance Scale	-

  Days to Ship: Số ngày giao hàng: Same day or more

  Same day or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Pointer Less Than One Rotation Dial Gauge

  OZAKI MFG (PEACOCK)

  [Features]· Dial gauge with scale intervals of 0.01 mm/0.001 mm and a pointer with less than one full rotation.· The rotation of the pointer is kept to less than 1 turn in order to prevent misreading.· Choose from an abundance of device models for the dedicated relative measurement dial

  Application	Scale interval minimal display(mm)	Display Method	Maximum Measurement Length (Range Selection)(mm)	Waterproof Function	Output terminal for measuring data: with or without	Scale type	Calibration Certificate
  Standard Type	0.001 ～ 0.01	Dial	0–1	-	-	Balance Scale	-

  From: 1,406,544 VND
  Days to Ship: Số ngày giao hàng: Same day or more

  Same day or more

• You can add up to 6 items per a category to the compare list. Compare

  

  

  

  

  

  

  Pic-Test New Pic-Test PC/PCN

  OZAKI MFG (PEACOCK)

  Improved abrasion resistance with a probe with a ruby ball.

  Application	Scale interval minimal display(mm)	Display Method	Maximum Measurement Length (Range Selection)(mm)	Waterproof Function	Output terminal for measuring data: with or without	Scale type	Calibration Certificate
  Standard Type	0.01	Dial	0–1	NA	NA	Balance Scale	-

  From: 2,922,990 VND
  Days to Ship: Số ngày giao hàng: 8 Day(s) or more

  8 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Large Dial Gauge, 3/4 Series Long Stroke

  MITUTOYO

  The scale of this dial gauge has a large surface diameter for easy reading. Models with long measurement ranges are also available. Limit needle and outer frame clamp are included as standard with all models.

  Application	Scale interval minimal display(mm)	Display Method	Maximum Measurement Length (Range Selection)(mm)	Waterproof Function	Output terminal for measuring data: with or without	Scale type	Calibration Certificate
  Standard Type	0.001 ～ 0.01	Dial	0–1 ～ 6~20	NA	NA	Balance Scale	-

  Days to Ship: Số ngày giao hàng: Quote

  Quote

• You can add up to 6 items per a category to the compare list. Compare

  

  Lever Test (Auto Clutch)

  TECLOCK

  [Features]· It has improved sensitivity for dimensional displacement compared to a dial gauge.· The probe and indicator are made from non-magnetic materials, so they are not influenced by the magnetic force.· Using an auto-clutch mechanism without a switching lever, the measuring direction is switched automatically between forward and reverse.· The probe can be set to an arc angle of 220°.[Applications]· For measuring the exterior, interior, grooves and finding the center.

  Application	Scale interval minimal display(mm)	Display Method	Maximum Measurement Length (Range Selection)(mm)	Waterproof Function	Output terminal for measuring data: with or without	Scale type	Calibration Certificate
  Lever Type (Indicator)	0.001 ～ 0.01	Dial	0–1	-	-	Balance Scale	-

  From: 2,727,123 VND
  Days to Ship: Số ngày giao hàng: 4 Day(s) or more

  4 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  New Pic-Test (without Stem, V-Series)

  OZAKI MFG (PEACOCK)

  Miniature bearings are used for the bearings of the fulcrum portion of the gauge heads to reduce the effects of rod play and achieve excellent indicating stability.

  Application	Scale interval minimal display(mm)	Display Method	Maximum Measurement Length (Range Selection)(mm)	Waterproof Function	Output terminal for measuring data: with or without	Scale type	Calibration Certificate
  Lever Type (Indicator)	0.001 ～ 0.01	Dial	0–1	Available	-	Balance Scale	-

  From: 2,891,974 VND
  Days to Ship: Số ngày giao hàng: 6 Day(s) or more

  6 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Pictest (Double Sided Type, W Series)

  OZAKI MFG (PEACOCK)

  A double-sided lever type dial gauge that is very useful for work piece centering measurement. It is provided with a gauge damage prevention measurement probe. By adopting a balancing needle, errors due to difference in posture (gauge mounting direction) are minimized.

  Application	Scale interval minimal display(mm)	Display Method	Maximum Measurement Length (Range Selection)(mm)	Waterproof Function	Output terminal for measuring data: with or without	Scale type	Calibration Certificate
  Lever Type (Indicator)	0.01	Dial	0–1	-	-	Balance Scale	-

  From: 4,891,432 VND
  Days to Ship: Số ngày giao hàng: 6 Day(s) or more

  6 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Pointer Less than One Rotation New Pick Test (Z Series)

  OZAKI MFG (PEACOCK)

  [Features]· Miniature bearings are used in the fulcrum portion of the gauge heads to realize excellent durability and sensitivity.· Bearing jewel used in all bearings provides outstanding indicating sensitivity.· An O-ring is used for the rotating part of the external frame, providing reinforced oil resistance.· It has a measurement probe and a groove to prevent gauge damage, so even if force is applied in a horizontal direction, the probe will break at the grooved point, and the gauge body is protected.· Because it is a no-clutch type, an auto-reverse rotation operating method is adopted so that the indicating needle always rotates clockwise, whether movement is forward or backward.· By adopting a balancing needle, errors due to difference in posture (gauge mounting direction) are minimized.

  Application	Scale interval minimal display(mm)	Display Method	Maximum Measurement Length (Range Selection)(mm)	Waterproof Function	Output terminal for measuring data: with or without	Scale type	Calibration Certificate
  Lever Type (Indicator)	0.002 ～ 0.01	Dial	0–1	-	-	Balance Scale	-

  From: 2,455,847 VND
  Days to Ship: Số ngày giao hàng: 6 Day(s) or more

  6 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Upright Dial Gauge

  OZAKI MFG (PEACOCK)

  [Features]· Ideal for dimensional inspection of precision parts, thickness measurement of experimental samples, rubber, leather, cloth and plastic products.· Since the table can be moved vertically, it is easy to set up the objects to be measured.· We manufacture various products such as rubber, leather, urethane, film, etc. using a constant pressure thickness measuring weight assembly method conforming to JIS standards

  Application	Scale interval minimal display(mm)	Display Method	Maximum Measurement Length (Range Selection)(mm)	Waterproof Function	Output terminal for measuring data: with or without	Scale type	Calibration Certificate
  Dial Gauge Stand	0.01	Dial	6~20	-	-	Balance Scale	-

  From: 8,708,185 VND
  Days to Ship: Số ngày giao hàng: 6 Day(s) or more

  6 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  2 Series Regular Dial Gauge (Less than 1 Rotation Type / Lightweight Type)

  MITUTOYO

  [Features]· Uses Mitutoyo's original shockproof mechanism with a buffering mechanism, making it excellent in durability and impact resistance.

  Application	Scale interval minimal display(mm)	Display Method	Maximum Measurement Length (Range Selection)(mm)	Waterproof Function	Output terminal for measuring data: with or without	Scale type	Calibration Certificate
  Standard Type	0.02	Dial	1.1 to 5	NA	NA	Balance Scale	-

  From: 1,933,333 VND
  Days to Ship: Số ngày giao hàng: 46 Day(s)

  46 Day(s)

• You can add up to 6 items per a category to the compare list. Compare

  

  Dial Indicator (0 To 0.02 mm / 0.002‑mm Graduations), Ruby Measurement Probe

  NIIGATA SEIKI (SK)

  A non-conductive dial indicator that allows for easy measurements in narrow and deep spaces. [Features]· Includes inspection report.· A ruby is embedded in the measurement probe.· Measurements can be taken easily in places that cannot be measured using a typical dial gauge such as in narrow or deep spaces.· Uses jewel bearings for each of the bearings, ensuring excellent accuracy and durability.· The round ruby probe provides excellent abrasion resistance and does not conduct electricity or become magnetically charged.· Uses a green scale plate for improved visibility. [Applications]· Inside and outside measurements and to measure groove widths, centering, parallelism, flatness, etc.

  Application	Scale interval minimal display(mm)	Display Method	Maximum Measurement Length (Range Selection)(mm)	Waterproof Function	Output terminal for measuring data: with or without	Scale type	Calibration Certificate
  Lever Type (Indicator)	0.002	Dial	0–1	NA	NA	Balance Scale	No

  From: 2,737,811 VND
  Days to Ship: Số ngày giao hàng: 12 Day(s)

  12 Day(s)

• You can add up to 6 items per a category to the compare list. Compare

  

  

  

  Dial Indicator (0 To 0.8 mm / 0.01‑mm Graduations), Ruby Measurement Probe

  NIIGATA SEIKI (SK)

  A non-conductive dial indicator that allows for easy measurements in narrow and deep spaces. [Features]· Includes inspection report.· A ruby is embedded in the measurement probe.· Measurements can be taken easily in places that cannot be measured using a typical dial gauge such as in narrow or deep spaces.· Uses jewel bearings for each of the bearings, ensuring excellent accuracy and durability.· The round ruby probe provides excellent abrasion resistance and does not conduct electricity or become magnetically charged.· Uses a green scale plate for improved visibility. [Applications]· Inside and outside measurements and to measure groove widths, centering, parallelism, flatness, etc.

  Application	Scale interval minimal display(mm)	Display Method	Maximum Measurement Length (Range Selection)(mm)	Waterproof Function	Output terminal for measuring data: with or without	Scale type	Calibration Certificate
  Lever Type (Indicator)	0.01	Dial	0–1	NA	NA	Balance Scale	No

  From: 1,953,120 VND
  Days to Ship: Số ngày giao hàng: 9 Day(s) or more

  9 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  

  

  Dial Gauge, Dial comparator (Point Measuring Instrument)

  MAHR

  [Features]·Innovative scale panel design.·In order to improve repeatability and durability, rubies are used for all internal friction parts.·The measuring spindle uses a patented special bearing.·The shock prevention mechanism automatically disconnects the mechanism when the measurement range is exceeded to prevent failure.·A long-selling product that was developed and sold 70 years ago.·Large, high-contrast dial.·Adjustable Tolerance Marker.·Lock type fine adjustment screw.·Both the mounting shank and measuring spindle are made of hardened stainless steel.·Insensitive to lateral forces (lateral play) acting as a measuring spindle.·Maximum sensitivity and accuracy are ensured only by excellent travel performance and the use of precision gears and pinions.·The measuring spindle can be retracted with either a cable release screw or a lift knob.[Applications]·1µm, 0.5µm precision measurement.·Precision machined product manufacturing field.·Precision equipment manufacturing and automobile parts manufacturing fields.

  Application	Scale interval minimal display(mm)	Display Method	Maximum Measurement Length (Range Selection)(mm)	Waterproof Function	Output terminal for measuring data: with or without	Scale type	Calibration Certificate
  Standard Type	0.0005 ～ 0.001	Dial	0–1	-	-	Balance Scale	-

  From: 8,535,465 VND
  Days to Ship: Số ngày giao hàng: 6 Day(s) or more

  6 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Dial Gauge, Guideline Microindicator Mumetron

  CITIZENSEIMITSU

  The Mu-METRON series is a full-fledged industrial measuring instrument designed to meet the high-precision measurement needs, achieving high precision, high sensitivity and high stability. A buffer mechanism is used for outstanding durability and shock resistance as well.

  Application	Scale interval minimal display(mm)	Display Method	Maximum Measurement Length (Range Selection)(mm)	Waterproof Function	Output terminal for measuring data: with or without	Scale type	Calibration Certificate
  Standard Type	0.5 ～ 1	Dial	-	-	-	Balance Scale	-

  From: 9,034,880 VND
  Days to Ship: Số ngày giao hàng: 4 Day(s) or more

  4 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Compact Dial Gauge (Measurement Range 1 to 5 mm)

  OZAKI MFG (PEACOCK)

  Compact dial gauge with small surface diameter. Does not take up space for multipoint measurement or mounting to a jig, etc.

  Application	Scale interval minimal display(mm)	Display Method	Maximum Measurement Length (Range Selection)(mm)	Waterproof Function	Output terminal for measuring data: with or without	Scale type	Calibration Certificate
  Standard Type	0.01	Dial	1.1 to 5	-	-	Balance Scale	-

  From: 1,577,494 VND
  Days to Ship: Số ngày giao hàng: 4 Day(s) or more

  4 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Surface Dial, New Peak Test (D Series)

  OZAKI MFG (PEACOCK)

  [Features]· The display is enlarged by approximately 30% for better visibility.· The long stem (screw-in type) has been standardized.· Select from 0.01 mm, 0.002 mm, or 0.001 mm types.· The gauge damage prevention probe is provided on all models.· D type in which the display can be seen clearly even from a distance.· Surface diameter φ46.5.· Easy to read the minimum display.

  Application	Scale interval minimal display(mm)	Display Method	Maximum Measurement Length (Range Selection)(mm)	Waterproof Function	Output terminal for measuring data: with or without	Scale type	Calibration Certificate
  Lever Type (Indicator)	0.001 ～ 0.01	Dial	0–1	-	-	Balance Scale	-

  From: 2,990,334 VND
  Days to Ship: Số ngày giao hàng: 6 Day(s) or more

  6 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Non-Magnetic/Non-Energization New Pic-Test (U Series)

  OZAKI MFG (PEACOCK)

  [Features]· Gauge heads and pointers are non-magnetic, so they are not affected by magnetic environments.· The use of ceramic stems achieves non-conductivity, allowing use in electric discharge machines, etc.· Easy to read light blue scale.· Select from 0.01 mm, 0.002 mm, or 0.001 mm types.· The gauge damage prevention probe is provided on all models.· By adopting a balancing needle, errors due to difference in posture (gauge mounting direction) are minimized.· Improved abrasion resistance with a probe with a ruby ball.

  Application	Scale interval minimal display(mm)	Display Method	Maximum Measurement Length (Range Selection)(mm)	Waterproof Function	Output terminal for measuring data: with or without	Scale type	Calibration Certificate
  Lever Type (Indicator)	0.001 ～ 0.01	Dial	0–1	-	-	Balance Scale	-

  From: 3,360,560 VND
  Days to Ship: Số ngày giao hàng: 4 Day(s) or more

  4 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Dial Indicator (0 To 0.02 mm / 0.002‑mm Graduations), Carbide Measurement Probe

  NIIGATA SEIKI (SK)

  An abrasion-resistant type dial indicator that allows for easy measurements in narrow and deep spaces. [Features]· Includes inspection report.· Features carbide measurement probes.· Measurements can be taken easily in places that cannot be measured using a typical dial gauge such as in narrow or deep spaces.· Uses jewel bearings for each of the bearings, ensuring excellent accuracy and durability.· The round carbide probe boasts high abrasion-resistance and high levels of hardness and so will not scratch easily. It also has a low thermal expansion coefficient.· Uses a green scale plate for improved visibility. [Applications]· Inside and outside measurements and to measure groove widths, centering, parallelism, flatness, etc.

  Application	Scale interval minimal display(mm)	Display Method	Maximum Measurement Length (Range Selection)(mm)	Waterproof Function	Output terminal for measuring data: with or without	Scale type	Calibration Certificate
  Lever Type (Indicator)	0.002	Dial	0–1	NA	NA	Balance Scale	No

  From: 2,737,811 VND
  Days to Ship: Số ngày giao hàng: 12 Day(s)

  12 Day(s)

• You can add up to 6 items per a category to the compare list. Compare

  

  

  

  Dial Indicator (0 To 0.8 mm / 0.01‑mm Graduations)

  NIIGATA SEIKI (SK)

  A handy dial gauge for measuring unevenness and straightness, etc., in tight spaces where use of typical dial gauges is not possible. [Features]· Includes inspection report.· Measurements can be taken easily in places that cannot be measured using a typical dial gauge such as in narrow or deep spaces.· Uses jewel bearings for each of the bearings.· Uses a green scale plate for improved visibility.· Lever-type dial gauge.· The main body is made of steel. [Applications]· Used for inside and outside measurements and to measure groove widths, centering, parallelism, flatness, etc.

  Application	Scale interval minimal display(mm)	Display Method	Maximum Measurement Length (Range Selection)(mm)	Waterproof Function	Output terminal for measuring data: with or without	Scale type	Calibration Certificate
  Lever Type (Indicator)	0.01	Dial	0–1	NA	NA	Balance Scale	No

  From: 1,931,877 VND
  Days to Ship: Số ngày giao hàng: 9 Day(s) or more

  9 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Standard Dial Gauge (Graduations: 0.001 mm)

  NIIGATA SEIKI (SK)

  Standard model dial gauge with 0.001‑mm graduations and excellent abrasion resistance. [Features]· The most common type of dial gauge with 0.001‑mm graduations. Built-in limit indicator.· Features an O-ring sealed between the inner and outer lid to prevent water and oil entering.· Uses jewel bearings.· Uses a green scale plate for improved visibility.· Flat-type back and center-lug back lid included.· Carbide probe. [Applications]· Measuring surface flatness and checking tool set ups.· Used for measuring axial runout, checking squareness, etc.

  Application	Scale interval minimal display(mm)	Display Method	Maximum Measurement Length (Range Selection)(mm)	Waterproof Function	Output terminal for measuring data: with or without	Scale type	Calibration Certificate
  Standard Type	0.001	Dial	0–1	NA	NA	Balance Scale	No

  From: 2,405,390 VND
  Days to Ship: Số ngày giao hàng: 10 Day(s)

  10 Day(s)

• You can add up to 6 items per a category to the compare list. Compare

  

  Regular Dial Gauge 2 Series, Waterproof Type, Scale Interval 0.01 / 0.001 mm Type

  MITUTOYO

  Dial Indicators Series 2- Metric Standard Type [FEATURES]Series 2 dial indicators are Mitutoyo’s most popular, and have the widest application.Standard 0.01 mm graduation dial gauges having an outer frame with an outside diameter of 57 mm. All types come with limit pins and an outer frame clamp as standard.The outer clamp and lifting lever (optional) can be attached to either the right or left side. These parts can be easily installed and removed without tools.Secured adhesion between the outer frame and crystal as well as the use of an O-ring ensure countermeasures against water and oil permeation via the front face.The stem spindle is made of high-strength quench-hardened stainless steel which resists strenuous use.A carbide contact point is used.The grand gear uses stainless steel that is resistant to wear and deformation.Application of a hard coating on the surface of the crystal makes the gauge highly scratch- and chemical-resistant.[Usage]· For comparative measurement. Installation on jigs.[Specification]· Measurement Range (mm): 0 to 10· Minimum Display (mm): 0.010· Graduation Specification: 0-100· Mount Shaft Diameter (mm): 8·Measuring Force (N): 2.5 or less·Dial diameter: 57 mm

  Application	Scale interval minimal display(mm)	Display Method	Maximum Measurement Length (Range Selection)(mm)	Waterproof Function	Output terminal for measuring data: with or without	Scale type	Calibration Certificate
  Standard Type	0.001	Dial	0–1	Available	NA	Balance Scale	-

  Days to Ship: Số ngày giao hàng: Quote

  Quote

• You can add up to 6 items per a category to the compare list. Compare

  

  2 Series Standard Dial Gauge Less Than 1 Rotation / Waterproof Type

  MITUTOYO

  It is excellent in durability and impact resistance as it adopts Mitsutoyo's unique shock proof mechanism which uses cushioning mechanism. Dial gauge developed to prevent reading errors during multiple rotations.

  Application	Scale interval minimal display(mm)	Display Method	Maximum Measurement Length (Range Selection)(mm)	Waterproof Function	Output terminal for measuring data: with or without	Scale type	Calibration Certificate
  Standard Type	0.001	Dial	0–1	Available	NA	Balance Scale	-

  Days to Ship: Số ngày giao hàng: Quote

  Quote

• You can add up to 6 items per a category to the compare list. Compare

  

  Dial Gauge, Indicating Micrometer

  MAHR

  [Features]· With lock function.· It comes with a thermal insulation cover.· Capable of comparative measurements in 1 µm increments, impossible with micrometers.· Stable measurement is possible by adopting a 1003 Millimess dial gauge.· A high-quality configuration suitable for high-precision measurement that can detect errors at a 1 μm level.[Applications]· For the measurement of precision components that require high precision.

  Application	Scale interval minimal display(mm)	Display Method	Maximum Measurement Length (Range Selection)(mm)	Waterproof Function	Output terminal for measuring data: with or without	Scale type	Calibration Certificate
  Thickness type	0.001	Dial	21 to 50	-	-	Balance Scale	-

  From: 37,354,153 VND
  Days to Ship: Số ngày giao hàng: 6 Day(s) or more

  6 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  

  

  

  

  Lever Test (Lever Swap Type)

  TECLOCK

  Lever Test Features]Since the probe and pointer are nonmagnetic, they are not affected by magnetism.The probe can be set at an angle of 200° arc.[Specifications]Maximum Measurement Length (Range Selection):0-1mmScale type:Balanced ScaleMounting shaft diameter:6mmMeasured force:0.4N or less[Application]For various measurements such as outside, inside, inside the groove, centering.

  Application	Scale interval minimal display(mm)	Display Method	Maximum Measurement Length (Range Selection)(mm)	Waterproof Function	Output terminal for measuring data: with or without	Scale type	Calibration Certificate
  Lever Type (Indicator)	0.002 ～ 0.01	Dial	0–1	-	-	Balance Scale	-

  From: 2,885,679 VND
  Days to Ship: Số ngày giao hàng: 4 Day(s) or more

  4 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Signal indicator 2S series

  CITIZENSEIMITSU

  [Features]·Large, easy-to-read display.·Rubber bellows can be installed as an option on the 2S type.

  Application	Scale interval minimal display(mm)	Display Method	Maximum Measurement Length (Range Selection)(mm)	Waterproof Function	Output terminal for measuring data: with or without	Scale type	Calibration Certificate
  Standard Type	2 ～ 10	Dial	-	-	-	Balance Scale	-

  From: 11,304,238 VND
  Days to Ship: Số ngày giao hàng: 4 Day(s) or more

  4 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Signal indicator 1S series

  CITIZENSEIMITSU

  This smaller compact type can also be installed in even narrower locations. Durability - A ball slide has been adopted for the spindle part to increase the durability. Environmental resistance - Improved dust-proof and drip-proof properties. Safe for use in machining/assembling sites, etc. as well.

  Application	Scale interval minimal display(mm)	Display Method	Maximum Measurement Length (Range Selection)(mm)	Waterproof Function	Output terminal for measuring data: with or without	Scale type	Calibration Certificate
  Standard Type	10	Dial	-	-	-	Balance Scale	-

  From: 14,071,213 VND
  Days to Ship: Số ngày giao hàng: 4 Day(s) or more

  4 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Stone Dial Comparator

  OBISHI KEIKI SEISAKUSHO

  [Features]· Equipped with a fine motion mechanism that makes it easy to move a very small dial gauge.· The base was manufactured using high quality black gabbro.· Minimal secular change and temperature fluctuations, with excellent hardness and wear resistance.

  Application	Scale interval minimal display(mm)	Display Method	Maximum Measurement Length (Range Selection)(mm)	Waterproof Function	Output terminal for measuring data: with or without	Scale type	Calibration Certificate
  Dial Gauge Stand	-	Dial	6~20	-	-	Balance Scale	-

  From: 27,453,004 VND
  Days to Ship: Số ngày giao hàng: 21 Day(s) or more

  21 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Pictest (without Stem, V Series)

  OZAKI MFG (PEACOCK)

  Miniature bearings are used for the bearings of the fulcrum portion of the gauge heads to reduce the effects of rod play and achieve excellent indicating stability.

  Application	Scale interval minimal display(mm)	Display Method	Maximum Measurement Length (Range Selection)(mm)	Waterproof Function	Output terminal for measuring data: with or without	Scale type	Calibration Certificate
  Lever Type (Indicator)	0.002 ～ 0.01	Dial	0–1	Available	-	Balance Scale	-

  From: 2,467,453 VND
  Days to Ship: Số ngày giao hàng: 6 Day(s) or more

  6 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Pic Test for Low Pressure (E Series)

  OZAKI MFG (PEACOCK)

  [Features]· Lever-type dial gauge with super low pressure measuring force (0.05 N / 0.1 N).· No-clutch type (PCN) and switching lever type (PC) are available as a selection of 0.01 mm or 0.002 mm options.· Uses a green scale plate that is easy on the eyes.· Highly sensitive, enabling measurement at low measurement power.· The gauge damage prevention probe is provided on all models.· By adopting a balancing needle, errors due to difference in posture (gauge mounting direction) are minimized.· Try it out if you are having trouble with errors due to the effects of measuring force

  Application	Scale interval minimal display(mm)	Display Method	Maximum Measurement Length (Range Selection)(mm)	Waterproof Function	Output terminal for measuring data: with or without	Scale type	Calibration Certificate
  Lever Type (Indicator)	0.01	Dial	0–1	-	-	Balance Scale	-

  From: 2,546,338 VND
  Days to Ship: Số ngày giao hàng: 4 Day(s) or more

  4 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Dial Inside Gauge Replacement Lot for U Series

  OZAKI MFG (PEACOCK)

  A replacement rod for use with the U Series Dial Inside Gauge.[Features]· Ideal for measuring the internal diameters of relatively large holes and internal wall surfaces.

  Application	Scale interval minimal display(mm)	Display Method	Maximum Measurement Length (Range Selection)(mm)	Waterproof Function	Output terminal for measuring data: with or without	Scale type	Calibration Certificate
  Standard Type	0.01	Dial	101 or More	-	-	Balance Scale	-

  From: 10,063,583 VND
  Days to Ship: Số ngày giao hàng: 6 Day(s) or more

  6 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Dial Inside Gauge

  OZAKI MFG (PEACOCK)

  Ideal for measuring the internal diameters of relatively large holes and internal wall surfaces.

  Application	Scale interval minimal display(mm)	Display Method	Maximum Measurement Length (Range Selection)(mm)	Waterproof Function	Output terminal for measuring data: with or without	Scale type	Calibration Certificate
  Standard Type	0.01	Dial	51 to 100 ～ 101 or More	-	-	Balance Scale	-

  From: 5,079,692 VND
  Days to Ship: Số ngày giao hàng: 7 Day(s) or more

  7 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Dial Gauge Flat Back Cover with Handles

  MITUTOYO

  A flat rear cover designed for the dial gauge.

  Application	Scale interval minimal display(mm)	Display Method	Maximum Measurement Length (Range Selection)(mm)	Waterproof Function	Output terminal for measuring data: with or without	Scale type	Calibration Certificate
  Standard Type	0.01	Dial	1.1 to 5	-	-	Balance Scale	-

  Days to Ship: Số ngày giao hàng: Quote

  Quote

• You can add up to 6 items per a category to the compare list. Compare

  

  Dial Test Indicator (NA513)

  BLUEBIRD

  Application	Scale interval minimal display(mm)	Display Method	Maximum Measurement Length (Range Selection)(mm)	Waterproof Function	Output terminal for measuring data: with or without	Scale type	Calibration Certificate
  Standard Type	-	Dial	0~0.2 ～ 0~0.8	NA	-	Balance Scale	-

  From: 2,266,445 VND
  Days to Ship: Số ngày giao hàng: 4 Day(s) or more

  4 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Standard One Revolution Type for Error-free Reading-SERIES 2

  MITUTOYO

  • Mitutoyo’s unique shock-proof mechanism is incorporated, providing improved resistance to shock due to sudden spindle retraction caused by impact.• This series has been developed to eliminate the possibility of reading errors due tomiscounting multiple revolutions.• The dead zone in red indicates “accuracy not guaranteed”.

  Application	Scale interval minimal display(mm)	Display Method	Maximum Measurement Length (Range Selection)(mm)	Waterproof Function	Output terminal for measuring data: with or without	Scale type	Calibration Certificate
  -	-	Dial	0~0.8	-	-	Balance Scale	-

  From: 2,196,154 VND
  Days to Ship: Số ngày giao hàng: Quote

  Quote

• You can add up to 6 items per a category to the compare list. Compare

  

  Dial Indicator (0 To 0.8 mm / 0.01‑mm Graduations), Carbide Measurement Probe

  NIIGATA SEIKI (SK)

  An abrasion-resistant type dial indicator that allows for easy measurements in narrow and deep spaces. [Features]· Includes inspection report.· Features carbide measurement probes.· Measurements can be taken easily in places that cannot be measured using a typical dial gauge such as in narrow or deep spaces.· Uses jewel bearings for each of the bearings, ensuring excellent accuracy and durability.· The round carbide probe boasts high abrasion-resistance and high levels of hardness and so will not scratch easily. It also has a low thermal expansion coefficient.· Uses a green scale plate for improved visibility. [Applications]· Inside and outside measurements and to measure groove widths, centering, parallelism, flatness, etc.

  Application	Scale interval minimal display(mm)	Display Method	Maximum Measurement Length (Range Selection)(mm)	Waterproof Function	Output terminal for measuring data: with or without	Scale type	Calibration Certificate
  Lever Type (Indicator)	0.01	Dial	0–1	NA	NA	Balance Scale	No

  From: 1,953,120 VND
  Days to Ship: Số ngày giao hàng: 12 Day(s)

  12 Day(s)

BrandNhãn hiệu
Product SeriesDòng sản phẩm
From
Days to ShipSố ngày giao hàng
Application
Scale interval minimal display(mm)
Display Method
Maximum Measurement Length (Range Selection)(mm)
Waterproof Function
Output terminal for measuring data: with or without
Scale type
Calibration Certificate

	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare
BrandNhãn hiệu	MITUTOYO	OZAKI MFG (PEACOCK)	OZAKI MFG (PEACOCK)	OZAKI MFG (PEACOCK)	OZAKI MFG (PEACOCK)	MITUTOYO	MAHR	MITUTOYO	OZAKI MFG (PEACOCK)	OZAKI MFG (PEACOCK)	MITUTOYO	TECLOCK	OZAKI MFG (PEACOCK)	OZAKI MFG (PEACOCK)	OZAKI MFG (PEACOCK)	OZAKI MFG (PEACOCK)	MITUTOYO	NIIGATA SEIKI (SK)	NIIGATA SEIKI (SK)	MAHR	CITIZENSEIMITSU	OZAKI MFG (PEACOCK)	OZAKI MFG (PEACOCK)	OZAKI MFG (PEACOCK)	NIIGATA SEIKI (SK)	NIIGATA SEIKI (SK)	NIIGATA SEIKI (SK)	MITUTOYO	MITUTOYO	MAHR	TECLOCK	CITIZENSEIMITSU	CITIZENSEIMITSU	OBISHI KEIKI SEISAKUSHO	OZAKI MFG (PEACOCK)	OZAKI MFG (PEACOCK)	OZAKI MFG (PEACOCK)	OZAKI MFG (PEACOCK)	MITUTOYO	BLUEBIRD	MITUTOYO	NIIGATA SEIKI (SK)
Product SeriesDòng sản phẩm	Dial Gauge SERIES 2 - Standard Type, 0.01mm And 0.001 Graduation	Dial Gauge, Pictest (Switch Lever Type, PC Series)	Dial Gauge, New Pic-test (No Clutch Type, PCN Type)	Standard Shaped Dial Gauge (Scale Interval: 0.001 mm)	New Pic Test for Low Pressure (E Series)	Small Dial Gauge 1 Series, Outer Frame Diameter φ31 mm, φ36 mm, φ40 mm Type	Lever Type Dial Gauge	Regular Dial Gauge 2 Series, Under 1 Turn Type	Pointer Less Than One Rotation Dial Gauge	Pic-Test New Pic-Test PC/PCN	Large Dial Gauge, 3/4 Series Long Stroke	Lever Test (Auto Clutch)	New Pic-Test (without Stem, V-Series)	Pictest (Double Sided Type, W Series)	Pointer Less than One Rotation New Pick Test (Z Series)	Upright Dial Gauge	2 Series Regular Dial Gauge (Less than 1 Rotation Type / Lightweight Type)	Dial Indicator (0 To 0.02 mm / 0.002‑mm Graduations), Ruby Measurement Probe	Dial Indicator (0 To 0.8 mm / 0.01‑mm Graduations), Ruby Measurement Probe	Dial Gauge, Dial comparator (Point Measuring Instrument)	Dial Gauge, Guideline Microindicator Mumetron	Compact Dial Gauge (Measurement Range 1 to 5 mm)	Surface Dial, New Peak Test (D Series)	Non-Magnetic/Non-Energization New Pic-Test (U Series)	Dial Indicator (0 To 0.02 mm / 0.002‑mm Graduations), Carbide Measurement Probe	Dial Indicator (0 To 0.8 mm / 0.01‑mm Graduations)	Standard Dial Gauge (Graduations: 0.001 mm)	Regular Dial Gauge 2 Series, Waterproof Type, Scale Interval 0.01 / 0.001 mm Type	2 Series Standard Dial Gauge Less Than 1 Rotation / Waterproof Type	Dial Gauge, Indicating Micrometer	Lever Test (Lever Swap Type)	Signal indicator 2S series	Signal indicator 1S series	Stone Dial Comparator	Pictest (without Stem, V Series)	Pic Test for Low Pressure (E Series)	Dial Inside Gauge Replacement Lot for U Series	Dial Inside Gauge	Dial Gauge Flat Back Cover with Handles	Dial Test Indicator (NA513)	Standard One Revolution Type for Error-free Reading-SERIES 2	Dial Indicator (0 To 0.8 mm / 0.01‑mm Graduations), Carbide Measurement Probe
From		2,477,289 VND	2,901,810 VND	2,704,500 VND	3,096,759 VND		3,242,725 VND		1,406,544 VND	2,922,990 VND		2,727,123 VND	2,891,974 VND	4,891,432 VND	2,455,847 VND	8,708,185 VND	1,933,333 VND	2,737,811 VND	1,953,120 VND	8,535,465 VND	9,034,880 VND	1,577,494 VND	2,990,334 VND	3,360,560 VND	2,737,811 VND	1,931,877 VND	2,405,390 VND			37,354,153 VND	2,885,679 VND	11,304,238 VND	14,071,213 VND	27,453,004 VND	2,467,453 VND	2,546,338 VND	10,063,583 VND	5,079,692 VND		2,266,445 VND	2,196,154 VND	1,953,120 VND
Days to ShipSố ngày giao hàng	Quote	4 Day(s) or more	4 Day(s) or more	6 Day(s) or more	4 Day(s) or more	Quote	6 Day(s) or more	Same day or more	Same day or more	8 Day(s) or more	Quote	4 Day(s) or more	6 Day(s) or more	6 Day(s) or more	6 Day(s) or more	6 Day(s) or more	46 Day(s)	12 Day(s)	9 Day(s) or more	6 Day(s) or more	4 Day(s) or more	4 Day(s) or more	6 Day(s) or more	4 Day(s) or more	12 Day(s)	9 Day(s) or more	10 Day(s)	Quote	Quote	6 Day(s) or more	4 Day(s) or more	4 Day(s) or more	4 Day(s) or more	21 Day(s) or more	6 Day(s) or more	4 Day(s) or more	6 Day(s) or more	7 Day(s) or more	Quote	4 Day(s) or more	Quote	12 Day(s)
Application	Standard Type	Lever Type (Indicator)	Lever Type (Indicator)	Standard Type	Lever Type (Indicator)	Standard Type	Lever Type (Indicator)	Standard Type	Standard Type	Standard Type	Standard Type	Lever Type (Indicator)	Lever Type (Indicator)	Lever Type (Indicator)	Lever Type (Indicator)	Dial Gauge Stand	Standard Type	Lever Type (Indicator)	Lever Type (Indicator)	Standard Type	Standard Type	Standard Type	Lever Type (Indicator)	Lever Type (Indicator)	Lever Type (Indicator)	Lever Type (Indicator)	Standard Type	Standard Type	Standard Type	Thickness type	Lever Type (Indicator)	Standard Type	Standard Type	Dial Gauge Stand	Lever Type (Indicator)	Lever Type (Indicator)	Standard Type	Standard Type	Standard Type	Standard Type	-	Lever Type (Indicator)
Scale interval minimal display(mm)	0.001 ～ 0.01	0.002 ～ 0.01	0.001 ～ 0.01	0.001	0.002 ～ 0.01	0.002 ～ 0.01	0.002 ～ 0.01	0.001 ～ 0.1	0.001 ～ 0.01	0.01	0.001 ～ 0.01	0.001 ～ 0.01	0.001 ～ 0.01	0.01	0.002 ～ 0.01	0.01	0.02	0.002	0.01	0.0005 ～ 0.001	0.5 ～ 1	0.01	0.001 ～ 0.01	0.001 ～ 0.01	0.002	0.01	0.001	0.001	0.001	0.001	0.002 ～ 0.01	2 ～ 10	10	-	0.002 ～ 0.01	0.01	0.01	0.01	0.01	-	-	0.01
Display Method	Dial	Dial	Dial	Dial	Dial	Dial	Dial	Dial	Dial	Dial	Dial	Dial	Dial	Dial	Dial	Dial	Dial	Dial	Dial	Dial	Dial	Dial	Dial	Dial	Dial	Dial	Dial	Dial	Dial	Dial	Dial	Dial	Dial	Dial	Dial	Dial	Dial	Dial	Dial	Dial	Dial	Dial
Maximum Measurement Length (Range Selection)(mm)	1.1 to 5 ～ 6~20	0–1	0–1 ～ 1.1 to 5	0–1 ～ 1.1 to 5	0–1	0–1 ～ 1.1 to 5	0–1	0–1 ～ 1.1 to 5	0–1	0–1	0–1 ～ 6~20	0–1	0–1	0–1	0–1	6~20	1.1 to 5	0–1	0–1	0–1	-	1.1 to 5	0–1	0–1	0–1	0–1	0–1	0–1	0–1	21 to 50	0–1	-	-	6~20	0–1	0–1	101 or More	51 to 100 ～ 101 or More	1.1 to 5	0~0.2 ～ 0~0.8	0~0.8	0–1
Waterproof Function	NA	Available	Available	Available	-	NA	-	NA	-	NA	NA	-	Available	-	-	-	NA	NA	NA	-	-	-	-	-	NA	NA	NA	Available	Available	-	-	-	-	-	Available	-	-	-	-	NA	-	NA
Output terminal for measuring data: with or without	NA	-	-	-	-	NA	-	NA	-	NA	NA	-	-	-	-	-	NA	NA	NA	-	-	-	-	-	NA	NA	NA	NA	NA	-	-	-	-	-	-	-	-	-	-	-	-	NA
Scale type	Balance Scale	Balance Scale	Balance Scale	Balance Scale	Balance Scale	Balance Scale	Balance Scale	Balance Scale	Balance Scale	Balance Scale	Balance Scale	Balance Scale	Balance Scale	Balance Scale	Balance Scale	Balance Scale	Balance Scale	Balance Scale	Balance Scale	Balance Scale	Balance Scale	Balance Scale	Balance Scale	Balance Scale	Balance Scale	Balance Scale	Balance Scale	Balance Scale	Balance Scale	Balance Scale	Balance Scale	Balance Scale	Balance Scale	Balance Scale	Balance Scale	Balance Scale	Balance Scale	Balance Scale	Balance Scale	Balance Scale	Balance Scale	Balance Scale
Calibration Certificate	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	No	No	-	-	-	-	-	No	No	No	-	-	-	-	-	-	-	-	-	-	-	-	-	-	No

Loading...Tải…