Chamfer, V-Grooves（work material：high hardness steel）

• You can add up to 6 items per a category to the compare list. Compare

  

  XAL Series Carbide Chamfer End Mill 2-Flute

  MISUMI

  [Features]・Recommended for chamfering general steel.・Ideal for chamfering and V-groove machining.・The coating with excellent lubricity exhibits stable abrasion resistance, especially in raw material machining, and can be expected to improve the shape accuracy of the workpiece.

  • Volume Discount

  CAD ：

  2D / 3D

  Tool Material Type	Tool Diameter (D)(mm)	Tip angle (θ)	Application	work material	Single blade, two blades	Peripheral Blade Y/N	Coating Y/N	Coating Type	R Size (R)(mm)
  Carbide	3 ～ 16	60 ～ 120	Centering (Positioning) / Hole Chamfer / Chamfering/Horizontal	high hardness steel[○]	Single blade	NA	Available	AlCrN	-

  From: 935,000 VND
  Days to Ship: Số ngày giao hàng: 4 Day(s) or more

  4 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  

  Leading Drill VP-LDS

  OSG

  V coating allows longer lifespan than TIN-NC-LDS.

  Tool Material Type	Tool Diameter (D)(mm)	Tip angle (θ)	Application	work material	Single blade, two blades	Peripheral Blade Y/N	Coating Y/N	Coating Type	R Size (R)(mm)
  Powder high-speed steel	3 ～ 25	90	Centering (Positioning) / Hole Chamfer	high hardness steel[○]	Single blade	NA	Available	TiCN	-

  From: 471,340 VND
  Special Price
  Days to Ship: Số ngày giao hàng: Same day or more

  Same day or more

• You can add up to 6 items per a category to the compare list. Compare

  

  XCP Series Carbide Chamfer End Mill for High Hardness Steel Machining / 6-Flute / Short Type

  MISUMI

  [Features]・The popular high hardness steel chamfer end mill is even more affordable.・Ideal for chamfering high hardness steel up to 65 HRC. (V-groove machining is not possible because there is no cutting edge at the tip)・High-efficiency machining is possible by adopting a 6-flute shape.・Ideal for high speed machining and dry machining of heat-treated steel and high hardness steel due to the coating with high oxidation-resistance temperature and high hardness.・The finish of the surface roughness of the workpiece after machining is very good.

  • Volume Discount

  CAD ：

  2D / 3D

  Tool Material Type	Tool Diameter (D)(mm)	Tip angle (θ)	Application	work material	Single blade, two blades	Peripheral Blade Y/N	Coating Y/N	Coating Type	R Size (R)(mm)
  Carbide	3 ～ 12	90	Centering (Positioning) / Hole Chamfer / Chamfering/Horizontal	high hardness steel[◎]	Single blade	NA	Available	TS	-

  From: 1,227,500 VND
  Days to Ship: Số ngày giao hàng: 4 Day(s) or more

  4 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  TS coated carbide chamfer, V grooving end mill, 2-flute

  MISUMI

  [Features]·Ideal for chamfering and V-groove·It has coating with high oxidation resistance and high hardness, and achieves a long service lifespan. Effective in high-speed machining and dry machining as coating properties·Can be regrinded. Please refer to the page dedicated to "regrinding service" for usage procedures, range of services, prices, delivery times, etc.

  • Volume Discount

  • TS
  • General Steel
  • 2 Flutes

  CAD ：

  2D / 3D

  Tool Material Type	Tool Diameter (D)(mm)	Tip angle (θ)	Application	work material	Single blade, two blades	Peripheral Blade Y/N	Coating Y/N	Coating Type	R Size (R)(mm)
  Carbide	3 ～ 16	60 ～ 120	Centering (Positioning) / Hole Chamfer / Chamfering/Horizontal / V Groove	high hardness steel[○]	Single blade	NA	Available	TS	-

  From: 1,763,476 VND
  Days to Ship: Số ngày giao hàng: 4 Day(s) or more

  4 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  TS coated carbide chamfer, V grooving end mill, 2-flute / long shank model

  MISUMI

  Ideal for the Deep Chamfering of Workpieces

  • Volume Discount

  • TS
  • General Steel
  • 2 Flutes

  CAD ：

  2D / 3D

  Tool Material Type	Tool Diameter (D)(mm)	Tip angle (θ)	Application	work material	Single blade, two blades	Peripheral Blade Y/N	Coating Y/N	Coating Type	R Size (R)(mm)
  Carbide	3 ～ 12	90	Centering (Positioning) / Hole Chamfer / Chamfering/Horizontal / V Groove	high hardness steel[○]	Single blade	Available	Available	TS	-

  From: 2,000,567 VND
  Days to Ship: Số ngày giao hàng: Same day or more

  Same day or more

• You can add up to 6 items per a category to the compare list. Compare

  

  

  

  TS coated carbide chamfering end mill, 2-flute / short model

  MISUMI

  [Features]·Ideal for chamfering. Can also be used as a deburring tool·Since it has peripheral flutes, it is possible to perform inclined, contour, and helical cutting·Since the peripheral flutes have helix angle, it is possible to process as shown in the above figure·It has coating with high oxidation resistance and high hardness, and achieves a long service lifespan. Effective in high-speed machining and dry machining as coating properties·Can be regrinded. Please refer to the page dedicated to "regrinding service" for usage procedures, range of services, etc.

  • Volume Discount

  • TS
  • General Steel
  • 2 Flutes
  • S (Short)

  CAD ：

  2D / 3D

  Tool Material Type	Tool Diameter (D)(mm)	Tip angle (θ)	Application	work material	Single blade, two blades	Peripheral Blade Y/N	Coating Y/N	Coating Type	R Size (R)(mm)
  Carbide	3 ～ 12	60 ～ 120	Centering (Positioning) / Hole Chamfer / Chamfering/Horizontal	high hardness steel[○]	Single blade	Available	Available	TS	-

  From: 1,222,151 VND
  Days to Ship: Số ngày giao hàng: Same day or more

  Same day or more

• You can add up to 6 items per a category to the compare list. Compare

  

  2-flute Spiral Chamfering Cutter FX-SCC

  OSG

  By using a sharp cutting helical blade, you can obtain a clean machined surface with less burrs.

  Tool Material Type	Tool Diameter (D)(mm)	Tip angle (θ)	Application	work material	Single blade, two blades	Peripheral Blade Y/N	Coating Y/N	Coating Type	R Size (R)(mm)
  Carbide	0.8 ～ 1	90	Centering (Positioning) / Hole Chamfer / Chamfering/Horizontal / V Groove	high hardness steel[◎]	Single blade	NA	Available	TiAlN	-

  From: 2,420,240 VND
  Days to Ship: Số ngày giao hàng: 6 Day(s) or more

  6 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  CoroMill Plura - General Purpose Chamfering End Mill, Cylindrical Shank / Weldon Shank

  SANDVIK

  High performance end mill with high versatility[Features]·One end mill for all work materials·Improved machine operating rate·Minimize tool inventory·Safe and predictable tool life·High flexibility and optimized tooling

  Tool Material Type	Tool Diameter (D)(mm)	Tip angle (θ)	Application	work material	Single blade, two blades	Peripheral Blade Y/N	Coating Y/N	Coating Type	R Size (R)(mm)
  Carbide	6 ～ 12	90°	Chamfering/Horizontal	high hardness steel[○]	Single blade	NA	Available	Other	-

  From: 2,185,571 VND
  Days to Ship: Số ngày giao hàng: 8 Day(s) or more

  8 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  TS Coated Carbide Chamfering End Mill, for High-Hardness Steel Machining, 6-Flute / Short Model

  MISUMI

  The popular high-hardness steel chamfer is even more affordable

  • Volume Discount

  • TS
  • High-Hardness Steel
  • Multi-Flutes （5 ~）
  • S (Short)

  CAD ：

  2D / 3D

  Tool Material Type	Tool Diameter (D)(mm)	Tip angle (θ)	Application	work material	Single blade, two blades	Peripheral Blade Y/N	Coating Y/N	Coating Type	R Size (R)(mm)
  Carbide	10	90	Centering (Positioning) / Hole Chamfer / Chamfering/Horizontal	high hardness steel[◎]	Single blade	NA	Available	TS	-

  From: 2,455,981 VND
  Days to Ship: Số ngày giao hàng: Same day

  Same day

• You can add up to 6 items per a category to the compare list. Compare

  

  2-flute, Corner Rounding Type FX-ECR

  OSG

  Dedicated tool for R chamfering. High-toughness carbide is used as the base material, and it is available with a wide range of work materials.

  Tool Material Type	Tool Diameter (D)(mm)	Tip angle (θ)	Application	work material	Single blade, two blades	Peripheral Blade Y/N	Coating Y/N	Coating Type	R Size (R)(mm)
  Carbide	0.5 ～ 1.5	-	Round Chamfer	high hardness steel[○]	Single blade	NA	Available	TiAlN	0.1 ～ 2

  From: 1,681,952 VND
  Days to Ship: Số ngày giao hàng: 6 Day(s) or more

  6 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  XAL Series Carbide Chamfer End Mill, 2-Flute / 15° Helix Angle

  MISUMI

  [Features]・Machining from positioning to chamfering with a single tool.

  • Volume Discount

  CAD ：

  2D / 3D

  Tool Material Type	Tool Diameter (D)(mm)	Tip angle (θ)	Application	work material	Single blade, two blades	Peripheral Blade Y/N	Coating Y/N	Coating Type	R Size (R)(mm)
  Carbide	3 ～ 10	90	Centering (Positioning) / Hole Chamfer / Chamfering/Horizontal	high hardness steel[○]	Single blade	NA	Available	AlCrN	-

  From: 1,523,836 VND
  Days to Ship: Số ngày giao hàng: 4 Day(s) or more

  4 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  

  

  

  Double Sided Chamfering Cutter 45° DFC

  THE CUT

  [Features]· Capable of V-grooving both front and back surfaces as well as the side surfaces.· Capable of chamfering up to C2.8 for front chamfering.· The use of a dedicated insert (4 cutting edges) delivers high precision machining.

  Tool Material Type	Tool Diameter (D)(mm)	Tip angle (θ)	Application	work material	Single blade, two blades	Peripheral Blade Y/N	Coating Y/N	Coating Type	R Size (R)(mm)
  -	11 ～ 20	-	Hole Chamfer / V Groove	high hardness steel[○]	-	-	-	-	-

  From: 5,660,515 VND
  Days to Ship: Số ngày giao hàng: 9 Day(s) or more

  9 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  TS coated carbide chamfering end mill, 3-flute / short model

  MISUMI

  [Features]·Ideal for chamfering (V-groove is not possible as there is no cutting flute on the tip).·Peripheral flutes enable inclined, contour and helical cutting·The 3-flute shape enables the feed rate to be improved up to 1.5 times that of the 2-flute type·With helix angle on the peripheral flutes·Can also be used as a deburring tool·It has coating with high oxidation resistance and high hardness, and achieves a long service lifespan. Effective in high-speed machining and dry machining as coating properties

  • Volume Discount

  • TS
  • General Steel
  • 3 Flutes
  • S (Short)

  CAD ：

  2D / 3D

  Tool Material Type	Tool Diameter (D)(mm)	Tip angle (θ)	Application	work material	Single blade, two blades	Peripheral Blade Y/N	Coating Y/N	Coating Type	R Size (R)(mm)
  Carbide	3 ～ 12	90	Centering (Positioning) / Hole Chamfer / Chamfering/Horizontal	high hardness steel[○]	Single blade	Available	Available	TS	-

  From: 1,891,926 VND
  Days to Ship: Số ngày giao hàng: 4 Day(s) or more

  4 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  XAL Series Carbide Chamfering / V-Groove End Mill, 2-Flute / Long Shank Type

  MISUMI

  [Features]・Recommended for deep section chamfering of general steel.・Ideal for chamfering and V-groove machining.・The coating with excellent lubricity exhibits stable abrasion resistance, especially in raw material machining, and can be expected to improve the shape accuracy of the workpiece.・The long type is ideal for deep cavity milling.

  • Volume Discount

  CAD ：

  2D / 3D

  Tool Material Type	Tool Diameter (D)(mm)	Tip angle (θ)	Application	work material	Single blade, two blades	Peripheral Blade Y/N	Coating Y/N	Coating Type	R Size (R)(mm)
  Carbide	3 ～ 12	90	Centering (Positioning) / Hole Chamfer / Chamfering/Horizontal / V Groove	high hardness steel[○]	Single blade	Available	Available	AlCrN	-

  From: 1,260,000 VND
  Days to Ship: Số ngày giao hàng: 4 Day(s) or more

  4 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  VP-SCC HSS Chamfer Series V Coat XPM 2 Blade Chamfer Cutter

  OSG

  By using a sharp cutting helical blade, you can obtain a clean machined surface with less burrs.

  Tool Material Type	Tool Diameter (D)(mm)	Tip angle (θ)	Application	work material	Single blade, two blades	Peripheral Blade Y/N	Coating Y/N	Coating Type	R Size (R)(mm)
  Powder high-speed steel	-	-	Centering (Positioning) / Hole Chamfer / Chamfering/Horizontal	high hardness steel[○]	Single blade	NA	Available	TiCN	-

  From: 1,728,333 VND
  Days to Ship: Số ngày giao hàng: 17 Day(s)

  17 Day(s)

• You can add up to 6 items per a category to the compare list. Compare

  

  TS coated carbide chamfering end mill, 2-flute / 15° spiral

  MISUMI

  [Features]·With the flute tip hard to chip and shape that facilitates cutting chip discharge, processing from positioning ( = centering) to chamfering is possible with a single tool·It has coating with high oxidation resistance and high hardness, and achieves a long service lifespan. Effective in high-speed machining and dry machining as coating properties·Can be regrinded. Please refer to the page dedicated to "regrinding service" for usage procedures, range of services, prices, etc.

  • Volume Discount

  • TS
  • General Steel
  • 2 Flutes

  CAD ：

  2D / 3D

  Tool Material Type	Tool Diameter (D)(mm)	Tip angle (θ)	Application	work material	Single blade, two blades	Peripheral Blade Y/N	Coating Y/N	Coating Type	R Size (R)(mm)
  Carbide	3 ～ 12	90	Centering (Positioning) / Hole Chamfer / Chamfering/Horizontal	high hardness steel[○]	Single blade	NA	Available	TS	-

  From: 2,066,669 VND
  Days to Ship: Số ngày giao hàng: 4 Day(s) or more

  4 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  XCP Series Carbide Inner Radius Cutter for High Hardness Steel Machining / 4-Flute / Short Type

  MISUMI

  [Features]・MISUMI's original inner radius cutter specialized for machining high hardness steel.・Ideal for high hardness steel inner radius machining up to 65 HRC.・High-efficiency machining is possible by adopting a 4-flute shape.・Ideal for high speed machining and dry machining of heat-treated steel and high hardness steel due to the coating with high oxidation-resistance temperature and high hardness.・The finish of the surface roughness of the workpiece after machining is very good.

  • Volume Discount

  CAD ：

  2D / 3D

  Tool Material Type	Tool Diameter (D)(mm)	Tip angle (θ)	Application	work material	Single blade, two blades	Peripheral Blade Y/N	Coating Y/N	Coating Type	R Size (R)(mm)
  Carbide	-	-	Round Chamfer	high hardness steel[◎]	Single blade	NA	Available	AlCrN	0.5 ～ 3

  From: 1,332,500 VND
  Days to Ship: Số ngày giao hàng: 4 Day(s) or more

  4 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  XAL Series Carbide Chamfer End Mill, 3-Flute / Short Type

  MISUMI

  [Features]・Popular 3-flute type for helix angle chambering with high feed rate.・Ideal for chamfering.(V-groove machining is not possible because there is no cutting edge at the tip)・Since it has an outer peripheral flute, it can perform inclined contours and helical cutting.・With the 3-flute shape, the feed can be increased up to 1.5 times that of the 2-flute type.・Since the outer peripheral flute has a helix angle, the machining shown in the above figure is possible.・It can also be used as a deburring tool.・The coating with excellent lubricity exhibits stable abrasion resistance, especially in raw material machining, and can be expected to improve the shape accuracy of the workpiece.

  • Volume Discount

  CAD ：

  2D / 3D

  Tool Material Type	Tool Diameter (D)(mm)	Tip angle (θ)	Application	work material	Single blade, two blades	Peripheral Blade Y/N	Coating Y/N	Coating Type	R Size (R)(mm)
  Carbide	3 ～ 12	-	Centering (Positioning) / Hole Chamfer / Chamfering/Horizontal	high hardness steel[○]	Single blade	Available	Available	AlCrN	-

  From: 1,200,000 VND
  Days to Ship: Số ngày giao hàng: 4 Day(s) or more

  4 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Leading Drill, Carbide FX Coat, Long Shank FX-LS-LDS

  OSG

  90° of the tip angle with FX coating, carbide leading drill long shank type. Ideal for chamfering deep parts.

  Tool Material Type	Tool Diameter (D)(mm)	Tip angle (θ)	Application	work material	Single blade, two blades	Peripheral Blade Y/N	Coating Y/N	Coating Type	R Size (R)(mm)
  Carbide	16 ～ 25	90	Centering (Positioning) / Hole Chamfer	high hardness steel[○]	Single blade	NA	Available	TiAlN	-

  From: 12,045,050 VND
  Days to Ship: Số ngày giao hàng: 6 Day(s) or more

  6 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Leading Drill, Carbide FX Coating FX-LDS

  OSG

  90° of the tip angle with FX coating, carbide leading drill. It enables high speed and long lifespan.

  Tool Material Type	Tool Diameter (D)(mm)	Tip angle (θ)	Application	work material	Single blade, two blades	Peripheral Blade Y/N	Coating Y/N	Coating Type	R Size (R)(mm)
  Carbide	16 ～ 25	90	Centering (Positioning) / Hole Chamfer	high hardness steel[○]	Single blade	NA	Available	TiAlN	-

  From: 7,073,445 VND
  Days to Ship: Số ngày giao hàng: 6 Day(s) or more

  6 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  2-flute, Long Shank, Spiral Chamfering Cutter FX-LS-SCC

  OSG

  Long shank type that can be used for machining deep parts. Since a twisting flute is used, chattering does not occur even if the amount of protrusion is large.

  Tool Material Type	Tool Diameter (D)(mm)	Tip angle (θ)	Application	work material	Single blade, two blades	Peripheral Blade Y/N	Coating Y/N	Coating Type	R Size (R)(mm)
  Carbide	0.8 ～ 1	90	Centering (Positioning) / Hole Chamfer / Chamfering/Horizontal / V Groove	high hardness steel[◎]	Single blade	NA	Available	TiAlN	-

  From: 2,921,398 VND
  Days to Ship: Số ngày giao hàng: 6 Day(s) or more

  6 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Toglon Sharp SP 60° ALD Coating

  IWATA TOOL

  [Features]· HRC40-72 hardened steel can be machined. High torsional shape exhibits performance hitherto unseen with hardened steel, die steel, Kovar, Hastelloy, etc., achieving the best surface roughness with a 3-flute long cutting edge and remarkable life.

  Tool Material Type	Tool Diameter (D)(mm)	Tip angle (θ)	Application	work material	Single blade, two blades	Peripheral Blade Y/N	Coating Y/N	Coating Type	R Size (R)(mm)
  Carbide	0.6 ～ 4	60	Centering (Positioning) / Hole Chamfer / Chamfering/Horizontal / V Groove	high hardness steel[○]	Single blade	NA	Available	Other	-

  From: 2,149,554 VND
  Days to Ship: Số ngày giao hàng: 6 Day(s) or more

  6 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Toglon Hard SP 90° ALD Coating

  IWATA TOOL

  [Features]· HRC40-72 hardened steel can be machined. High torsional shape exhibits performance hitherto unseen with hardened steel, die steel, Kovar, Hastelloy, etc., achieving the best surface roughness with a 3-flute long cutting edge and remarkable life.

  Tool Material Type	Tool Diameter (D)(mm)	Tip angle (θ)	Application	work material	Single blade, two blades	Peripheral Blade Y/N	Coating Y/N	Coating Type	R Size (R)(mm)
  Carbide	0.6 ～ 4	90	Centering (Positioning) / Hole Chamfer / Chamfering/Horizontal / V Groove	high hardness steel[○]	Single blade	NA	Available	Other	-

  From: 1,847,196 VND
  Days to Ship: Số ngày giao hàng: 6 Day(s) or more

  6 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Toglon Miniature Hard SP 90° ALT Coating

  IWATA TOOL

  [Features]· HRC40-72 hardened steel can be machined. High torsional shape exhibits performance hitherto unseen with hardened steel, die steel, Kovar, Hastelloy, etc., achieving the best surface roughness with a 3-flute long cutting edge and remarkable life.

  Tool Material Type	Tool Diameter (D)(mm)	Tip angle (θ)	Application	work material	Single blade, two blades	Peripheral Blade Y/N	Coating Y/N	Coating Type	R Size (R)(mm)
  Carbide	0.1 ～ 1.5	90	Centering (Positioning) / Hole Chamfer / Chamfering/Horizontal / V Groove	high hardness steel[○]	Single blade	NA	Available	ALT	-

  From: 1,937,884 VND
  Days to Ship: Số ngày giao hàng: 6 Day(s) or more

  6 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  MUGEN Coating C Chamfer Cutter NSCV-M

  NS TOOL

  [Features]· It enables easy C chamfering.· Uses MUGEN coating that dramatically improves the durability.

  Tool Material Type	Tool Diameter (D)(mm)	Tip angle (θ)	Application	work material	Single blade, two blades	Peripheral Blade Y/N	Coating Y/N	Coating Type	R Size (R)(mm)
  Carbide	4 ～ 6	45°	Chamfering/Horizontal	high hardness steel[○]	Single blade	Available	Available	TiAlN	-

  From: 2,077,788 VND
  Days to Ship: Số ngày giao hàng: 6 Day(s) or more

  6 Day(s) or more

BrandNhãn hiệu
Product SeriesDòng sản phẩm
CADCAD
From
Days to ShipSố ngày giao hàng
SpecificationsĐặc điểm kĩ thuật
Tool Material Type
Tool Diameter (D)(mm)
Tip angle (θ)
Application
work material
Single blade, two blades
Peripheral Blade Y/N
Coating Y/N
Coating Type
R Size (R)(mm)

	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare
BrandNhãn hiệu	MISUMI	OSG	MISUMI	MISUMI	MISUMI	MISUMI	OSG	SANDVIK	MISUMI	OSG	MISUMI	THE CUT	MISUMI	MISUMI	OSG	MISUMI	MISUMI	MISUMI	OSG	OSG	OSG	IWATA TOOL	IWATA TOOL	IWATA TOOL	NS TOOL
Product SeriesDòng sản phẩm	XAL Series Carbide Chamfer End Mill 2-Flute	Leading Drill VP-LDS	XCP Series Carbide Chamfer End Mill for High Hardness Steel Machining / 6-Flute / Short Type	TS coated carbide chamfer, V grooving end mill, 2-flute	TS coated carbide chamfer, V grooving end mill, 2-flute / long shank model	TS coated carbide chamfering end mill, 2-flute / short model	2-flute Spiral Chamfering Cutter FX-SCC	CoroMill Plura - General Purpose Chamfering End Mill, Cylindrical Shank / Weldon Shank	TS Coated Carbide Chamfering End Mill, for High-Hardness Steel Machining, 6-Flute / Short Model	2-flute, Corner Rounding Type FX-ECR	XAL Series Carbide Chamfer End Mill, 2-Flute / 15° Helix Angle	Double Sided Chamfering Cutter 45° DFC	TS coated carbide chamfering end mill, 3-flute / short model	XAL Series Carbide Chamfering / V-Groove End Mill, 2-Flute / Long Shank Type	VP-SCC HSS Chamfer Series V Coat XPM 2 Blade Chamfer Cutter	TS coated carbide chamfering end mill, 2-flute / 15° spiral	XCP Series Carbide Inner Radius Cutter for High Hardness Steel Machining / 4-Flute / Short Type	XAL Series Carbide Chamfer End Mill, 3-Flute / Short Type	Leading Drill, Carbide FX Coat, Long Shank FX-LS-LDS	Leading Drill, Carbide FX Coating FX-LDS	2-flute, Long Shank, Spiral Chamfering Cutter FX-LS-SCC	Toglon Sharp SP 60° ALD Coating	Toglon Hard SP 90° ALD Coating	Toglon Miniature Hard SP 90° ALT Coating	MUGEN Coating C Chamfer Cutter NSCV-M
CADCAD	2D / 3D		2D / 3D	2D / 3D	2D / 3D	2D / 3D			2D / 3D		2D / 3D		2D / 3D	2D / 3D		2D / 3D	2D / 3D	2D / 3D
From	935,000 VND	471,340 VND Special Price On Sale Till 31/03/2025	1,227,500 VND	1,763,476 VND	2,000,567 VND	1,222,151 VND	2,420,240 VND	2,185,571 VND	2,455,981 VND	1,681,952 VND	1,523,836 VND	5,660,515 VND	1,891,926 VND	1,260,000 VND	1,728,333 VND	2,066,669 VND	1,332,500 VND	1,200,000 VND	12,045,050 VND	7,073,445 VND	2,921,398 VND	2,149,554 VND	1,847,196 VND	1,937,884 VND	2,077,788 VND
Days to ShipSố ngày giao hàng	4 Day(s) or more	Same day or more	4 Day(s) or more	4 Day(s) or more	Same day or more	Same day or more	6 Day(s) or more	8 Day(s) or more	Same day	6 Day(s) or more	4 Day(s) or more	9 Day(s) or more	4 Day(s) or more	4 Day(s) or more	17 Day(s)	4 Day(s) or more	4 Day(s) or more	4 Day(s) or more	6 Day(s) or more	6 Day(s) or more	6 Day(s) or more	6 Day(s) or more	6 Day(s) or more	6 Day(s) or more	6 Day(s) or more
SpecificationsĐặc điểm kĩ thuật				TS General Steel 2 Flutes	TS General Steel 2 Flutes	TS General Steel 2 Flutes S (Short)			TS High-Hardness Steel Multi-Flutes （5 ~） S (Short)				TS General Steel 3 Flutes S (Short)			TS General Steel 2 Flutes
Tool Material Type	Carbide	Powder high-speed steel	Carbide	Carbide	Carbide	Carbide	Carbide	Carbide	Carbide	Carbide	Carbide	-	Carbide	Carbide	Powder high-speed steel	Carbide	Carbide	Carbide	Carbide	Carbide	Carbide	Carbide	Carbide	Carbide	Carbide
Tool Diameter (D)(mm)	3 ～ 16	3 ～ 25	3 ～ 12	3 ～ 16	3 ～ 12	3 ～ 12	0.8 ～ 1	6 ～ 12	10	0.5 ～ 1.5	3 ～ 10	11 ～ 20	3 ～ 12	3 ～ 12	-	3 ～ 12	-	3 ～ 12	16 ～ 25	16 ～ 25	0.8 ～ 1	0.6 ～ 4	0.6 ～ 4	0.1 ～ 1.5	4 ～ 6
Tip angle (θ)	60 ～ 120	90	90	60 ～ 120	90	60 ～ 120	90	90°	90	-	90	-	90	90	-	90	-	-	90	90	90	60	90	90	45°
Application	Centering (Positioning) / Hole Chamfer / Chamfering/Horizontal	Centering (Positioning) / Hole Chamfer	Centering (Positioning) / Hole Chamfer / Chamfering/Horizontal	Centering (Positioning) / Hole Chamfer / Chamfering/Horizontal / V Groove	Centering (Positioning) / Hole Chamfer / Chamfering/Horizontal / V Groove	Centering (Positioning) / Hole Chamfer / Chamfering/Horizontal	Centering (Positioning) / Hole Chamfer / Chamfering/Horizontal / V Groove	Chamfering/Horizontal	Centering (Positioning) / Hole Chamfer / Chamfering/Horizontal	Round Chamfer	Centering (Positioning) / Hole Chamfer / Chamfering/Horizontal	Hole Chamfer / V Groove	Centering (Positioning) / Hole Chamfer / Chamfering/Horizontal	Centering (Positioning) / Hole Chamfer / Chamfering/Horizontal / V Groove	Centering (Positioning) / Hole Chamfer / Chamfering/Horizontal	Centering (Positioning) / Hole Chamfer / Chamfering/Horizontal	Round Chamfer	Centering (Positioning) / Hole Chamfer / Chamfering/Horizontal	Centering (Positioning) / Hole Chamfer	Centering (Positioning) / Hole Chamfer	Centering (Positioning) / Hole Chamfer / Chamfering/Horizontal / V Groove	Centering (Positioning) / Hole Chamfer / Chamfering/Horizontal / V Groove	Centering (Positioning) / Hole Chamfer / Chamfering/Horizontal / V Groove	Centering (Positioning) / Hole Chamfer / Chamfering/Horizontal / V Groove	Chamfering/Horizontal
work material	high hardness steel[○]	high hardness steel[○]	high hardness steel[◎]	high hardness steel[○]	high hardness steel[○]	high hardness steel[○]	high hardness steel[◎]	high hardness steel[○]	high hardness steel[◎]	high hardness steel[○]	high hardness steel[○]	high hardness steel[○]	high hardness steel[○]	high hardness steel[○]	high hardness steel[○]	high hardness steel[○]	high hardness steel[◎]	high hardness steel[○]	high hardness steel[○]	high hardness steel[○]	high hardness steel[◎]	high hardness steel[○]	high hardness steel[○]	high hardness steel[○]	high hardness steel[○]
Single blade, two blades	Single blade	Single blade	Single blade	Single blade	Single blade	Single blade	Single blade	Single blade	Single blade	Single blade	Single blade	-	Single blade	Single blade	Single blade	Single blade	Single blade	Single blade	Single blade	Single blade	Single blade	Single blade	Single blade	Single blade	Single blade
Peripheral Blade Y/N	NA	NA	NA	NA	Available	Available	NA	NA	NA	NA	NA	-	Available	Available	NA	NA	NA	Available	NA	NA	NA	NA	NA	NA	Available
Coating Y/N	Available	Available	Available	Available	Available	Available	Available	Available	Available	Available	Available	-	Available	Available	Available	Available	Available	Available	Available	Available	Available	Available	Available	Available	Available
Coating Type	AlCrN	TiCN	TS	TS	TS	TS	TiAlN	Other	TS	TiAlN	AlCrN	-	TS	AlCrN	TiCN	TS	AlCrN	AlCrN	TiAlN	TiAlN	TiAlN	Other	Other	ALT	TiAlN
R Size (R)(mm)	-	-	-	-	-	-	-	-	-	0.1 ～ 2	-	-	-	-	-	-	0.5 ～ 3	-	-	-	-	-	-	-	-

Loading...Tải…