Thread-Cutting-Related Tools（Screw size (Nominal)：M10）

• You can add up to 6 items per a category to the compare list. Compare

  

  MACHINING CENTER Tap with Long Shank_EX-MCT

  OSG

  Stable performance can be obtained by suppressing the cutting chips from getting caught that tends to occur in the horizontal machining center.

  Screw size (Nominal)	Screw Types	work material	Pitch (P), Number of Threading(mm)	Tool Material Type	Tap Type	Hole type	Chamfer threads (Lcf)	Coating Type	Coating Y/N	Overall Length (L)(mm)
  M10	Meter	Low-Carbon Steel (carbon alloy less than 0.25%)[◎] / Medium carbon steel (carbon content 0.25 to 0.45%)[◎] / Alloy Steel (SCM)[○] / Steel casting (SC)[◎] / Cast Iron (FC)[○] / Ductile Cast Iron (FCD)[○] / Aluminum Alloy Casting (AC, ADC)[○] / Zinc Alloy Casting (ZDC)[○]	1.5	Vanadium High-Speed Steel	Thread-cutting-related tool	For through hole / For blind hole	3P	Non-Coated	NA	150

  From: 1,031,725 VND
  Days to Ship: Số ngày giao hàng: 17 Day(s)

  17 Day(s)

• You can add up to 6 items per a category to the compare list. Compare

  

  Hexagonal Shaft Spiral Tap (for Through Hole / Blind Hole)

  ONISHI MANUFACTURING

  [Features]· Uses HSS that features excellent abrasion resistance.· Can be attached to impact screwdriver models capable of forward and reverse rotation to easily drill screw holes.· Cutting chips are discharged upwards due to the spiral groove

  Screw size (Nominal)	Screw Types	work material	Pitch (P), Number of Threading(mm)	Tool Material Type	Tap Type	Hole type	Chamfer threads (Lcf)	Coating Type	Coating Y/N	Overall Length (L)(mm)
  M10	Meter	Steel casting (SC)[○] / Brass cast iron (BsC)[○] / Aluminum Rolled Material (AL)[○] / Aluminum Alloy Casting (AC, ADC)[○]	1.5	High-speed steel	Thread-cutting-related tool	For through hole / For blind hole	-	Non-Coated	NA	70

  From: 571,975 VND
  Days to Ship: Số ngày giao hàng: 9 Day(s)

  9 Day(s)

• You can add up to 6 items per a category to the compare list. Compare

  

  Check Pins for Bored Hole in Thread Cut Tapping (Straight Type)_CPC-S

  YAMAWA MFG

  5-piece set that can be used to check several types of pilot holes and pilot hole depth. High-speed tool steel is used out of consideration for abrasion resistance. Can be used for both through-holes and blind-holes.

  Screw size (Nominal)	Screw Types	work material	Pitch (P), Number of Threading(mm)	Tool Material Type	Tap Type	Hole type	Chamfer threads (Lcf)	Coating Type	Coating Y/N	Overall Length (L)(mm)
  M10	Meter	-	0.75 ～ 1.5	High-speed steel	Thread-cutting-related tool	For through hole / For blind hole	-	-	NA	110

  From: 770,610 VND
  Days to Ship: Số ngày giao hàng: 8 Day(s) or more

  8 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  六角軸タッピングドリル

  RUKO

  【特長】・六角軸シャンク仕様で、コードレスドライバーに装着可能です。・鉄板等の下穴開け作業とネジ切り作業をドリルを交換せずに行うことができます。【用途】・穴あけ、ネジ山の形成・修正に。・被削材：鉄、アルミ、銅。

  Screw size (Nominal)	Screw Types	work material	Pitch (P), Number of Threading(mm)	Tool Material Type	Tap Type	Hole type	Chamfer threads (Lcf)	Coating Type	Coating Y/N	Overall Length (L)(mm)
  M10	Meter	-	1.5	-	Thread-cutting-related tool	-	-	-	-	59

  From: 1,012,680 VND
  Days to Ship: Số ngày giao hàng: 9 Day(s)

  9 Day(s)

• You can add up to 6 items per a category to the compare list. Compare

  

  Check Pins for Bored Holes in Thread Cut Tapping (Taper Type)_CPC-T

  YAMAWA MFG

  Provides simple check of pilot hole diameter. Uses high speed tool steel out of consideration for wear resistance. Can be used for either through holes or blind holes with margin.

  Screw size (Nominal)	Screw Types	work material	Pitch (P), Number of Threading(mm)	Tool Material Type	Tap Type	Hole type	Chamfer threads (Lcf)	Coating Type	Coating Y/N	Overall Length (L)(mm)
  M10	Meter	-	1.5	High-speed steel	Thread-cutting-related tool	-	-	-	NA	100

  From: 525,953 VND
  Days to Ship: Số ngày giao hàng: 8 Day(s) or more

  8 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  六角軸タッピングドリル（TiNコーティング）

  RUKO

  【特長】・六角軸シャンク仕様で、コードレスドライバーに装着可能です。・鉄板等の下穴開け作業とネジ切り作業をドリルを交換せずに行うことができます。【用途】・穴あけ、ネジ山の形成・修正に。・被削材：鉄、アルミ、銅、ステンレス。

  Screw size (Nominal)	Screw Types	work material	Pitch (P), Number of Threading(mm)	Tool Material Type	Tap Type	Hole type	Chamfer threads (Lcf)	Coating Type	Coating Y/N	Overall Length (L)(mm)
  M10	Meter	-	1.5	-	Thread-cutting-related tool	-	-	-	-	59

  From: 1,304,280 VND
  Days to Ship: Số ngày giao hàng: 9 Day(s)

  9 Day(s)

• You can add up to 6 items per a category to the compare list. Compare

  

  Check Pins for Bored Hole in Thread Form Tapping (Straight Type)_CPR-S

  YAMAWA MFG

  [Features]· (Straight type) Roll tap check pin that can be used to check several types of pilot hole diameters and pilot hole depth.· High-speed tool steel is used out of consideration for abrasion resistance.· Can be used for blind holes.

  Screw size (Nominal)	Screw Types	work material	Pitch (P), Number of Threading(mm)	Tool Material Type	Tap Type	Hole type	Chamfer threads (Lcf)	Coating Type	Coating Y/N	Overall Length (L)(mm)
  M10	Meter	-	1.25 ～ 1.5	High-speed steel	Thread-cutting-related tool	For blind hole	-	Non-Coated	NA	-

  From: 770,610 VND
  Days to Ship: Số ngày giao hàng: 8 Day(s) or more

  8 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Check Pins for Bored Holes in Thread Form Tapping (Taper Type)_CPR-T

  YAMAWA MFG

  [Features]· (Taper type) Roll tap pilot hole check pin that can be used to easily check pilot hole diameters with the 1 tool.· High-speed tool steel is used out of consideration for abrasion resistance.· Can be used for both through-holes and blind-holes if the latter has ample room.

  Screw size (Nominal)	Screw Types	work material	Pitch (P), Number of Threading(mm)	Tool Material Type	Tap Type	Hole type	Chamfer threads (Lcf)	Coating Type	Coating Y/N	Overall Length (L)(mm)
  M10	Meter	-	1.25 ～ 1.5	High-speed steel	Thread-cutting-related tool	For through hole / For blind hole	-	Non-Coated	NA	-

  From: 553,924 VND
  Days to Ship: Số ngày giao hàng: 8 Day(s) or more

  8 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Shank Adjusters_SA

  YAMAWA MFG

  [Features]· Tap holder used to extend the tap length for use.· Can be used to make I series taps (ISP/IPO/IHT) longer.· Alloy steel.

  Screw size (Nominal)	Screw Types	work material	Pitch (P), Number of Threading(mm)	Tool Material Type	Tap Type	Hole type	Chamfer threads (Lcf)	Coating Type	Coating Y/N	Overall Length (L)(mm)
  M10	Meter	-	150	-	Thread-cutting-related tool	-	-	Non-Coated	NA	103

  From: 3,863,314 VND
  Days to Ship: Số ngày giao hàng: 8 Day(s)

  8 Day(s)

BrandNhãn hiệu
Product SeriesDòng sản phẩm
From
Days to ShipSố ngày giao hàng
Screw size (Nominal)
Screw Types
work material
Pitch (P), Number of Threading(mm)
Tool Material Type
Tap Type
Hole type
Chamfer threads (Lcf)
Coating Type
Coating Y/N
Overall Length (L)(mm)

	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare
BrandNhãn hiệu	OSG	ONISHI MANUFACTURING	YAMAWA MFG	RUKO	YAMAWA MFG	RUKO	YAMAWA MFG	YAMAWA MFG	YAMAWA MFG
Product SeriesDòng sản phẩm	MACHINING CENTER Tap with Long Shank_EX-MCT	Hexagonal Shaft Spiral Tap (for Through Hole / Blind Hole)	Check Pins for Bored Hole in Thread Cut Tapping (Straight Type)_CPC-S	六角軸タッピングドリル	Check Pins for Bored Holes in Thread Cut Tapping (Taper Type)_CPC-T	六角軸タッピングドリル（TiNコーティング）	Check Pins for Bored Hole in Thread Form Tapping (Straight Type)_CPR-S	Check Pins for Bored Holes in Thread Form Tapping (Taper Type)_CPR-T	Shank Adjusters_SA
From	1,031,725 VND	571,975 VND	770,610 VND	1,012,680 VND	525,953 VND	1,304,280 VND	770,610 VND	553,924 VND	3,863,314 VND
Days to ShipSố ngày giao hàng	17 Day(s)	9 Day(s)	8 Day(s) or more	9 Day(s)	8 Day(s) or more	9 Day(s)	8 Day(s) or more	8 Day(s) or more	8 Day(s)
Screw size (Nominal)	M10	M10	M10	M10	M10	M10	M10	M10	M10
Screw Types	Meter	Meter	Meter	Meter	Meter	Meter	Meter	Meter	Meter
work material	Low-Carbon Steel (carbon alloy less than 0.25%)[◎] / Medium carbon steel (carbon content 0.25 to 0.45%)[◎] / Alloy Steel (SCM)[○] / Steel casting (SC)[◎] / Cast Iron (FC)[○] / Ductile Cast Iron (FCD)[○] / Aluminum Alloy Casting (AC, ADC)[○] / Zinc Alloy Casting (ZDC)[○]	Steel casting (SC)[○] / Brass cast iron (BsC)[○] / Aluminum Rolled Material (AL)[○] / Aluminum Alloy Casting (AC, ADC)[○]	-	-	-	-	-	-	-
Pitch (P), Number of Threading(mm)	1.5	1.5	0.75 ～ 1.5	1.5	1.5	1.5	1.25 ～ 1.5	1.25 ～ 1.5	150
Tool Material Type	Vanadium High-Speed Steel	High-speed steel	High-speed steel	-	High-speed steel	-	High-speed steel	High-speed steel	-
Tap Type	Thread-cutting-related tool	Thread-cutting-related tool	Thread-cutting-related tool	Thread-cutting-related tool	Thread-cutting-related tool	Thread-cutting-related tool	Thread-cutting-related tool	Thread-cutting-related tool	Thread-cutting-related tool
Hole type	For through hole / For blind hole	For through hole / For blind hole	For through hole / For blind hole	-	-	-	For blind hole	For through hole / For blind hole	-
Chamfer threads (Lcf)	3P	-	-	-	-	-	-	-	-
Coating Type	Non-Coated	Non-Coated	-	-	-	-	Non-Coated	Non-Coated	Non-Coated
Coating Y/N	NA	NA	NA	-	NA	-	NA	NA	NA
Overall Length (L)(mm)	150	70	110	59	100	59	-	-	103

Loading...Tải…