(!) Since support from Microsoft will end on January 14th, 2020, Windows 7 will be excluded from the recommended environment from December 15th, 2019 on this site. Vì lý do Microsoft kết thúc hỗ trợ cho Windows 7 vào ngày 14/01/2020, Windows 7 sẽ là hệ điều hành không được khuyến khích sử dụng với trang web này từ ngày 15/12/2019.
Tel: 0222-361-1555
Email: [email protected]
8:00 - 17:00 (Mon - Sat)
Search by Category / Brand Tìm theo danh mục, nhãn hiệu
Search by Category Tìm theo danh mục
- [Thông báo] Cập nhật địa chỉ kho tập kết hàng hóa tại khu vực miền Nam của MISUMI Việt Nam. Xem chi tiết.
[Announcement] Update on warehouse address in the Southern region of MISUIMI Vietnam. See more. - [Cảnh Báo] Thủ Đoạn Lừa Đảo Từ Nhân Viên Giao Hàng – Yêu Cầu Trả Phí Ship. Xem chi tiết.
[Warning] Fraud Calling from Shipper - Asking to Pay Shipping Fee. See more.
Screw-Hole-Related Tools（Page10）
Search by specifying the lower class categoryTìm kiếm bằng cách chỉ định danh mục lớp thấp hơn
Hand Taps
Spiral Taps
Point Taps
Roll Taps
Taps for Pipes
Thread Cutters
Thread-Cutting-Related Tools
Dies
Tap Wrenches
Modification/Removal Tools
Brand |
|
|---|---|
Filter By |
|
| CAD |
|
| Days to Ship |
|
2,423 itemsMặt hàng
- Sort By
-
You can add up to 6 items per a category to the compare list.
ISHIHASHI
【特長】・高モリブデン含有により靭性があり、高硬度・耐熱・耐磨耗性に秀れています。・全体溝が左螺旋状溝となっているので、切粉が進行前方へ残らず排出されます。・溝が浅く、タップの心厚が大きいので、ねじれ強度が強く折れにくいです。【用途】・加工ねじ：メートル細目ねじ・通り穴専用。・被削材：ステンレス、難削材【商品仕様】・精度：JIS2級・呼び寸：M16・ピッチ(mm)：1.5・全長(mm)：88・シャンク径(mm)：10.5・シャンク四角部(mm)：8.0・下穴径(mm)：14.5・食い付山数：5山・ねじ長(mm)：30・表面処理：ノンコーティング・難削材用・トラスココード：500-3806・質量：111g【材質/仕上】・コバルト高速度鋼(HSCO-M42)
Screw size (Nominal) Screw Types work material Pitch (P), Number of Threading(mm) Tool Material Type Tap Type Hole type Chamfer threads (Lcf) Coating Type Coating Y/N Overall Length (L)(mm) - - - - - - - - - - - From: 1,653,461 VND Days to Ship: Số ngày giao hàng: 16 Day(s) 
16 Day(s)
-
You can add up to 6 items per a category to the compare list.
ISHIHASHI
【特長】・高モリブデン含有により靭性があり、高硬度・耐熱・耐磨耗性に秀れています。・切削性が良く切り屑はカール状に上へ巻き上がります。【用途】・加工ねじ：メートル細目ねじ・止り穴用。・被削材：ステンレス、難削材。【商品仕様】・精度：JIS2級・呼び寸：M10・ピッチ(mm)：1.25・全長(mm)：75・シャンク径(mm)：7.0・シャンク四角部(mm)：5.5・下穴径(mm)：8.8・食い付山数：2.5山・ねじ長(mm)：24・表面処理：ノンコーティング・難削材用・トラスココード：501-3356・質量：26g【材質/仕上】・コバルト高速度鋼(HSCO-M42)
Screw size (Nominal) Screw Types work material Pitch (P), Number of Threading(mm) Tool Material Type Tap Type Hole type Chamfer threads (Lcf) Coating Type Coating Y/N Overall Length (L)(mm) - - - - - - - - - - - From: 766,686 VND Days to Ship: Số ngày giao hàng: 13 Day(s)
13 Day(s)
-
You can add up to 6 items per a category to the compare list.
ISHIHASHI
【特長】・高モリブデン含有により靭性があり、高硬度・耐熱・耐磨耗性に秀れています。・切削性が良く切り屑はカール状に上へ巻き上がります。【用途】・加工ねじ：メートル細目ねじ・止り穴用。・被削材：ステンレス、難削材。【商品仕様】・精度：JIS2級・呼び寸：M12・ピッチ(mm)：1.5・全長(mm)：82・シャンク径(mm)：8.5・シャンク四角部(mm)：6.5・下穴径(mm)：10.5・食い付山数：2.5山・ねじ長(mm)：29・表面処理：ノンコーティング・難削材用・トラスココード：501-3399・質量：44g【材質/仕上】・コバルト高速度鋼(HSCO-M42)
Screw size (Nominal) Screw Types work material Pitch (P), Number of Threading(mm) Tool Material Type Tap Type Hole type Chamfer threads (Lcf) Coating Type Coating Y/N Overall Length (L)(mm) - - - - - - - - - - - From: 992,642 VND Days to Ship: Số ngày giao hàng: 13 Day(s)
13 Day(s)
-
You can add up to 6 items per a category to the compare list.
ISHIHASHI
【特長】・通り穴の加工深さがタップの呼び寸法の倍程要する場合に最適です。・刃長がショートタイプです。【用途】・深穴の通り穴専用。・被削材：一般鋼、低中炭素鋼、合金鋼。【商品仕様】・精度：JIS2級・呼び寸：M5.0・ピッチ(mm)：0.80・全長(mm)：60・シャンク径(mm)：5.5・シャンク四角部(mm)：4.5・下穴径(mm)：4.2・加工ねじ：メートルねじ・食い付山数：5山・首径：(mm)3.8・首下長：(mm)24・ねじ長(mm)：10・表面処理：ホモ処理・JANコード：4957656275954・トラスココード：502-1201・質量：11g【材質/仕上】・材質：SKH
Screw size (Nominal) Screw Types work material Pitch (P), Number of Threading(mm) Tool Material Type Tap Type Hole type Chamfer threads (Lcf) Coating Type Coating Y/N Overall Length (L)(mm) - - - - - - - - - - - From: 406,315 VND Days to Ship: Số ngày giao hàng: 13 Day(s)
13 Day(s)
-
You can add up to 6 items per a category to the compare list.
ISHIHASHI
【特長】・一般的なタップであらゆる方面で使用されています。【用途】・加工ねじ：メートルねじ・被削材：炭素鋼、アルミ合金、合金鋼。【商品仕様】・呼び寸：M12・ピッチ(mm)：1.75・加工ねじ：メートルねじ・全長(mm)：82・下穴径(mm)：10.3・シャンク径(mm)：8.5・シャンク四角部(mm)：6.5・先・中・上の3本組です。・ねじ長(mm)：38・タップ等級：JIS2級・(先)(中)(上)の各1本がセットです。・トラスココード：502-9724・質量：125g【材質/仕上】・材質：SKH
Screw size (Nominal) Screw Types work material Pitch (P), Number of Threading(mm) Tool Material Type Tap Type Hole type Chamfer threads (Lcf) Coating Type Coating Y/N Overall Length (L)(mm) - - - - - - - - - - - From: 1,670,991 VND Days to Ship: Số ngày giao hàng: 16 Day(s)
16 Day(s)
-
You can add up to 6 items per a category to the compare list.
ISHIHASHI
【特長】・一般的なタップであらゆる方面で使用されています。【用途】・加工ねじ：メートル細目ねじ・被削材：炭素鋼、アルミ合金、合金鋼。【商品仕様】・呼び寸：M8・ピッチ(mm)：0.75・全長(mm)：62・シャンク径(mm)：6.2・シャンク四角部(mm)：5.0・下穴径(mm)：7.3・加工ねじ：メートル細目ねじ・食い付山数：9山・先端食付き：9山・ねじ長(mm)：20・タップ等級：JIS2級・トラスココード：503-4477・質量：19g【材質/仕上】・材質：SKH
Screw size (Nominal) Screw Types work material Pitch (P), Number of Threading(mm) Tool Material Type Tap Type Hole type Chamfer threads (Lcf) Coating Type Coating Y/N Overall Length (L)(mm) - - - - - - - - - - - From: 559,270 VND Days to Ship: Số ngày giao hàng: 13 Day(s)
13 Day(s)
-
You can add up to 6 items per a category to the compare list.
ISHIHASHI
【特長】・ロングシャンクです。・管用ねじ用平行PFタップは管・管用部品等の接続で機械的結合を主目的とするもののねじ立てに使用され、PFタップで加工されたPF雌ねじはPF雄ねじとはめあい使用されます。【用途】・加工ねじ：平行ねじ用・被削材：中・高炭素鋼・ステンレス鋼等【商品仕様】・精度：JIS2級・呼び寸：3/8×19・全長(mm)：100・シャンク径(mm)：14.0・シャンク四角部(mm)：11.0・下穴径(mm)：15.0・材質：SKH・食い付：2.5山・ロングシャンク・ねじ長(mm)：28・ロングシャンクの管用ねじです。・トラスココード：503-6178・質量：119g【材質/仕上】・材質：SKH
Screw size (Nominal) Screw Types work material Pitch (P), Number of Threading(mm) Tool Material Type Tap Type Hole type Chamfer threads (Lcf) Coating Type Coating Y/N Overall Length (L)(mm) - - - - - - - - - - - From: 2,274,186 VND Days to Ship: Số ngày giao hàng: 16 Day(s)
16 Day(s)
-
You can add up to 6 items per a category to the compare list.
ISHIHASHI
【特長】・一般的なタップであらゆる方面で使用されています。・母材がSKS2鋼で経済的です。【用途】・加工ねじ：メートル細目ねじ・被削材：一般鉄鋼・軽合金【商品仕様】・呼び寸：M28・ピッチ(mm)：1.5・全長(mm)：105・シャンク径(mm)：21.0・シャンク四角部(mm)：17.0・下穴径(mm)：26.5・加工ねじ：メートルねじ・食い付山数：1.5山・先端食付き：1.5山・ねじ長(mm)：45・タップ等級：JIS3級・トラスココード：504-7340・質量：29g【材質/仕上】・合金工具鋼(SKS2)
Screw size (Nominal) Screw Types work material Pitch (P), Number of Threading(mm) Tool Material Type Tap Type Hole type Chamfer threads (Lcf) Coating Type Coating Y/N Overall Length (L)(mm) - - - - - - - - - - - From: 2,906,868 VND Days to Ship: Số ngày giao hàng: 16 Day(s)
16 Day(s)
-
You can add up to 6 items per a category to the compare list.
ISHIHASHI
【特長】・一般的なタップであらゆる方面で使用されています。・母材がSKS2鋼で経済的です。【用途】・加工ねじ：ユニファイ並目ねじ・被削材：一般鉄鋼・軽合金【商品仕様】・加工ねじ：ユニファイねじ・全長(mm)：46・下穴径(mm)：2.6・山数：40・シャンク四角部(mm)：3.2・シャンク径(mm)：4.0・先・中・上の3本組です。・ねじ長(mm)：18・タップ等級：JIS3級・(先)(中)(上)の各1本がセットです。・トラスココード：505-2238・質量：15g【材質/仕上】・合金工具鋼(SKS2)
Screw size (Nominal) Screw Types work material Pitch (P), Number of Threading(mm) Tool Material Type Tap Type Hole type Chamfer threads (Lcf) Coating Type Coating Y/N Overall Length (L)(mm) - - - - - - - - - - - From: 613,731 VND Days to Ship: Số ngày giao hàng: 13 Day(s)
13 Day(s)
-
You can add up to 6 items per a category to the compare list.
ISHIHASHI
【特長】・タングステン鋼の管用タップです。・ハイスに比べ経済的です。・管用テーパーねじ用タップは管・管用部品等の接続においてねじ部の耐密性を主目的とするもののねじ立てに使用され、PTタップで加工されたPT雌ねじはPT雄ねじとはめあい使用されます。【用途】・タングステン管用タップです。・被削材：一般鉄鋼・軽合金【商品仕様】・精度：JIS3級・ねじ長さ(mm)：28・全長(mm)：65・シャンク径(mm)：14.0・シャンク四角部(mm)：11.0・下穴径(mm)：14.5・呼び寸×山数：3/8×19PT・ねじ長(mm)：28・タングステン鋼の管用ねじ用・JANコード：4957656335023・トラスココード：505-2718・質量：72g【材質/仕上】・合金工具鋼(SKS2)
Screw size (Nominal) Screw Types work material Pitch (P), Number of Threading(mm) Tool Material Type Tap Type Hole type Chamfer threads (Lcf) Coating Type Coating Y/N Overall Length (L)(mm) - - - - - - - - - - - From: 1,115,205 VND Days to Ship: Số ngày giao hàng: 13 Day(s)
13 Day(s)
-
You can add up to 6 items per a category to the compare list.
ONISHI MANUFACTURING
【特長】・インパクトドライバー(12V以上)などの正逆回転付の電動工具に取り付けて、短時間でねじ穴加工ができます。タップの下穴用の6角軸鉄工ドリル3.3mmがセットされています。【用途】・貫通穴のねじ山の形成および修正。・被削材：鉄・アルミ・真鍮。【商品仕様】・精度：-・全長(mm)：70・シャンク径(mm)：6.35(六角軸)・呼び寸：M4・ピッチ(mm)：0.70・下穴径(mm)：3.3の六角軸鉄工ドリル・適合機種：12V以上の正逆回転付きインパクトドライバー・ねじ長(mm)：20・JANコード：4957934370227・トラスココード：808-1414・質量：34g【材質/仕上】・タップ：合金工具鋼(SKS)・鉄工ドリル：ハイス鋼(HSS)【セット内容/付属品】・6角軸タップM4X0.7 6角軸鉄工用ドリル3.3mmのセット
Screw size (Nominal) Screw Types work material Pitch (P), Number of Threading(mm) Tool Material Type Tap Type Hole type Chamfer threads (Lcf) Coating Type Coating Y/N Overall Length (L)(mm) - - - - - - - - - - - From: 497,624 VND Days to Ship: Số ngày giao hàng: 13 Day(s)
13 Day(s)
-
You can add up to 6 items per a category to the compare list.
ISHIHASHI
【特長】・切り屑を逃がす穴を持った雌ネジ形の工具です。・調整ねじ付です。・ブリスターパック1個入りです。【用途】・雄ねじ加工用。・被削材：低炭素鋼【商品仕様】・呼び寸：M8・ピッチ(mm)：1.25・外径(mm)：38.0・調整ねじ付き・ブリスターパック品・JANコード：4957656506393・トラスココード：506-1521・質量：82g【材質/仕上】・合金工具鋼(SKS2)
Screw size (Nominal) Screw Types work material Pitch (P), Number of Threading(mm) Tool Material Type Tap Type Hole type Chamfer threads (Lcf) Coating Type Coating Y/N Overall Length (L)(mm) - - - - - - - - - - - From: 1,258,093 VND Days to Ship: Số ngày giao hàng: 9 Day(s)
9 Day(s)
-
You can add up to 6 items per a category to the compare list.
ISHIHASHI
【特長】・手回し用タップハンドルです。【用途】・一文字ハンドル【商品仕様】・適用タップ寸法M3～M10・タップ立て用ハンドルです。・JANコード：4957656486145・トラスココード：506-6492・質量：155g【材質/仕上】・材質：亜鉛ダイカスト
Screw size (Nominal) Screw Types work material Pitch (P), Number of Threading(mm) Tool Material Type Tap Type Hole type Chamfer threads (Lcf) Coating Type Coating Y/N Overall Length (L)(mm) - - - - - - - - - - - From: 454,999 VND Days to Ship: Số ngày giao hàng: 9 Day(s)
9 Day(s)
-
You can add up to 6 items per a category to the compare list.
IS ラチェット式T型タップホルダー 3/8用(M3～M10)
ISHIHASHI
【特長】・ラチェット式で正逆回転切換えです。【用途】・適用タップ寸法M6～M12【商品仕様】・T型ハンドル・タップ立て用です。・JANコード：4957656486084・トラスココード：506-6573・質量：187g【材質/仕上】・材質：スチール
Screw size (Nominal) Screw Types work material Pitch (P), Number of Threading(mm) Tool Material Type Tap Type Hole type Chamfer threads (Lcf) Coating Type Coating Y/N Overall Length (L)(mm) - - - - - - - - - - - From: 922,361 VND Days to Ship: Số ngày giao hàng: 8 Day(s)
8 Day(s)
-
You can add up to 6 items per a category to the compare list.
ISHIHASHI
【特長】・切削性が良く切り屑はカール状に上へ巻き上がります。・ホモ処理により、切削油の保持をし摩擦熱の発生を少なくし、溶着も防止します。【用途】・加工ねじ：ユニファイ細目ねじ・止り穴用。・被削材：一般鋼、低中炭素鋼、合金鋼。【商品仕様】・精度：JIS2級・呼び寸：ユニファイ二分五厘・全長(mm)：70・シャンク径(mm)：6.1・シャンク四角部(mm)：5.0・下穴径(mm)：6.9・山数：24・加工ねじ：ユニファイねじ・食い付山数：..2.5山・表面処理：ホモ処理・ねじ長(mm)：30・タップ等級：H級・トラスココード：508-1068・質量：19g【材質/仕上】・高速度鋼(HSS-E)
Screw size (Nominal) Screw Types work material Pitch (P), Number of Threading(mm) Tool Material Type Tap Type Hole type Chamfer threads (Lcf) Coating Type Coating Y/N Overall Length (L)(mm) - - - - - - - - - - - From: 559,270 VND Days to Ship: Số ngày giao hàng: 13 Day(s)
13 Day(s)
-
You can add up to 6 items per a category to the compare list.
ISHIHASHI
【特長】・オーバーサイズです。・切削性が良く切り屑はカール状に上へ巻き上がります。・ホモ処理により、切削油の保持をし摩擦熱の発生を少なくし、溶着も防止します。【用途】・加工ねじ：メートルねじ・止り穴用。・食い付山数：2.5山・被削材：一般鋼、低中炭素鋼、合金鋼。【商品仕様】・精度：JIS2級+0.03相当・呼び寸：M20・ピッチ(mm)：2.5・全長(mm)：105・シャンク径(mm)：15.0・シャンク四角部(mm)：12.0・下穴径(mm)：17.5・加工ねじ：メートルねじ・食い付山数：..2.5山・表面処理：ホモ処理・ねじ長(mm)：37・オーバーサイズ・タップ等級：H級・トラスココード：508-2421・質量：135g【材質/仕上】・高速度鋼(HSS-E)
Screw size (Nominal) Screw Types work material Pitch (P), Number of Threading(mm) Tool Material Type Tap Type Hole type Chamfer threads (Lcf) Coating Type Coating Y/N Overall Length (L)(mm) - - - - - - - - - - - From: 2,267,016 VND Days to Ship: Số ngày giao hàng: 16 Day(s)
16 Day(s)
-
You can add up to 6 items per a category to the compare list.
ISHIHASHI
【特長】・オーバーサイズです。・切削性が良く切り屑はカール状に上へ巻き上がります。・ホモ処理により、切削油の保持をし摩擦熱の発生を少なくし、溶着も防止します。【用途】・加工ねじ：メートルねじ・止り穴用。・食い付山数：2.5山・被削材：一般鋼、低中炭素鋼、合金鋼。【商品仕様】・精度：JIS2級+0.05相当・呼び寸：M20・ピッチ(mm)：2.5・全長(mm)：105・シャンク径(mm)：15.0・シャンク四角部(mm)：12.0・下穴径(mm)：17.5・加工ねじ：メートルねじ・食い付山数：..2.5山・表面処理：ホモ処理・ねじ長(mm)：37・オーバーサイズ・タップ等級：H級・トラスココード：508-2439・質量：136g【材質/仕上】・高速度鋼(HSS-E)
Screw size (Nominal) Screw Types work material Pitch (P), Number of Threading(mm) Tool Material Type Tap Type Hole type Chamfer threads (Lcf) Coating Type Coating Y/N Overall Length (L)(mm) - - - - - - - - - - - From: 2,267,016 VND Days to Ship: Số ngày giao hàng: 16 Day(s)
16 Day(s)
-
You can add up to 6 items per a category to the compare list.
ISHIHASHI
【特長】・切削性が良く切り屑はカール状に上へ巻き上がります。・ホモ処理により、切削油の保持をし摩擦熱の発生を少なくし、溶着も防止します。【用途】・加工ねじ：メートルねじ・止り穴用。・食い付山数：2.5山・被削材：一般鋼、低中炭素鋼、合金鋼。【商品仕様】・精度：JIS2級・呼び寸：M8・ピッチ(mm)：1.0・全長(mm)：70・シャンク径(mm)：6.2・シャンク四角部(mm)：5.0・下穴径(mm)：7.0・加工ねじ：メートルねじ・食い付山数：..2.5山・表面処理：ホモ処理・ねじ長(mm)：22・タップ等級：H級・トラスココード：508-2595・質量：20g【材質/仕上】・高速度鋼(HSS-E)
Screw size (Nominal) Screw Types work material Pitch (P), Number of Threading(mm) Tool Material Type Tap Type Hole type Chamfer threads (Lcf) Coating Type Coating Y/N Overall Length (L)(mm) - - - - - - - - - - - From: 562,746 VND Days to Ship: Số ngày giao hàng: 13 Day(s)
13 Day(s)
-
You can add up to 6 items per a category to the compare list.
SG Spiral Tap Long Shank SGSPL
NACHI(FUJIKOSHI)
[Applications]·Used when standard dimension does not have enough tool runout length
Screw size (Nominal) Screw Types work material Pitch (P), Number of Threading(mm) Tool Material Type Tap Type Hole type Chamfer threads (Lcf) Coating Type Coating Y/N Overall Length (L)(mm) M3 ～ M17 Meter Low-Carbon Steel (carbon alloy less than 0.25%)[○] / Medium carbon steel (carbon content 0.25 to 0.45%)[◎] / High Carbon Steel (C with a content over 0.45%)[◎] / Alloy Steel (SCM)[○] / Stainless steel (SUS)[○] / Quenched and tempered steel (25 to 35 HRC)[○] / Ductile Cast Iron (FCD)[○] / Copper (Cu)[○] / Aluminum Rolled Material (AL)[○] / Aluminum Alloy Casting (AC, ADC)[○] 0.35 ～ 3 Alloy HSS Spiral Tap For through hole / For blind hole 2.5 - Available 150 ～ 200 From: 801,414 VND Days to Ship: Số ngày giao hàng: 6 Day(s) or more
6 Day(s) or more
-
You can add up to 6 items per a category to the compare list.
CMT Vertical Mill Thread (ISO-60°, Internal Diameter)
CARMEX
Screw size (Nominal) Screw Types work material Pitch (P), Number of Threading(mm) Tool Material Type Tap Type Hole type Chamfer threads (Lcf) Coating Type Coating Y/N Overall Length (L)(mm) - - - - - - - - - - - From: 2,225,236 VND Days to Ship: Số ngày giao hàng: 4 Day(s) or more
4 Day(s) or more
-
You can add up to 6 items per a category to the compare list.
SMATO
Screw size (Nominal) Screw Types work material Pitch (P), Number of Threading(mm) Tool Material Type Tap Type Hole type Chamfer threads (Lcf) Coating Type Coating Y/N Overall Length (L)(mm) M3 ～ M20 Meter - 0.5 ～ 2.5 SKS Die - - - - - From: 396,277 VND Days to Ship: Số ngày giao hàng: 4 Day(s) or more
4 Day(s) or more
-
You can add up to 6 items per a category to the compare list.
SMATO
Screw size (Nominal) Screw Types work material Pitch (P), Number of Threading(mm) Tool Material Type Tap Type Hole type Chamfer threads (Lcf) Coating Type Coating Y/N Overall Length (L)(mm) PF1-11 ～ PF3/8-19 - - - High-speed steel Tap for pipes - - - NA - From: 494,278 VND Days to Ship: Số ngày giao hàng: 4 Day(s) or more
4 Day(s) or more
-
You can add up to 6 items per a category to the compare list.
ENGINEER
Screw size (Nominal) Screw Types work material Pitch (P), Number of Threading(mm) Tool Material Type Tap Type Hole type Chamfer threads (Lcf) Coating Type Coating Y/N Overall Length (L)(mm) - - - - - Hand Tap - - - - - From: 1,061,636 VND Days to Ship: Số ngày giao hàng: 9 Day(s)
9 Day(s)
-
You can add up to 6 items per a category to the compare list.
YAMAWA MFG
[Features]· Ideal for S48C to S55C forged products and tempered materials (20 to 30 HRC).· Realizes longer life by adopting a special coating and high-speed steel material for abrasion resistance.· Adopts an original groove shape that realizes stable scrap discharge at medium speeds.· Improves the surface roughness of female threads.
Screw size (Nominal) Screw Types work material Pitch (P), Number of Threading(mm) Tool Material Type Tap Type Hole type Chamfer threads (Lcf) Coating Type Coating Y/N Overall Length (L)(mm) M6 ～ M16 Meter Low-Carbon Steel (carbon alloy less than 0.25%)[○] / Medium carbon steel (carbon content 0.25 to 0.45%)[○] / High Carbon Steel (C with a content over 0.45%)[◎] / Alloy Steel (SCM)[○] / Stainless steel (SUS)[○] / Quenched and tempered steel (25 to 35 HRC)[◎] / Tool Steel (Before SKD Hardening)[○] 1 ～ 1.75 Cobalt HSS Spiral Tap For through hole 5P ～ 7P Other Available 62 ～ 95 From: 550,062 VND Days to Ship: Số ngày giao hàng: 8 Day(s) or more
8 Day(s) or more
-
You can add up to 6 items per a category to the compare list.
Solid Round Dies for American Taper Pipe Threads_D-NPT
YAMAWA MFG
A solid die for machining tapered male threads for American pipes with improved runout accuracy.
Screw size (Nominal) Screw Types work material Pitch (P), Number of Threading(mm) Tool Material Type Tap Type Hole type Chamfer threads (Lcf) Coating Type Coating Y/N Overall Length (L)(mm) 1 ～ 3/8 Taper for Pipe - 11.5 ～ 27 High-speed steel Die - - Non-Coated NA - From: 2,664,500 VND Days to Ship: Số ngày giao hàng: 8 Day(s) or more
8 Day(s) or more
-
You can add up to 6 items per a category to the compare list.
TRUSCO Hexagonal Die & Gas Pipe Tap Set For PS Screws【12 Pieces Per Package】
TRUSCO NAKAYAMA
[Features]· Set of taps for parallel pipe screw threads and hexagonal chamfered nut dies (PS screw) for work using monkey wrenches. · Tap and die set in a case for convenient storage.
Screw size (Nominal) Screw Types work material Pitch (P), Number of Threading(mm) Tool Material Type Tap Type Hole type Chamfer threads (Lcf) Coating Type Coating Y/N Overall Length (L)(mm) - Parallel for Pipes - - - Tap for pipes - - - - - From: 25,642,000 VND Days to Ship: Số ngày giao hàng: 9 Day(s)
9 Day(s)
-
You can add up to 6 items per a category to the compare list.
Oxidized Spiral Pointed Taps for High Carbon Steels_HC-PO-OX
YAMAWA MFG
[Features]· A point tap suitable for tapping high carbon steel varieties such as S55C.
Screw size (Nominal) Screw Types work material Pitch (P), Number of Threading(mm) Tool Material Type Tap Type Hole type Chamfer threads (Lcf) Coating Type Coating Y/N Overall Length (L)(mm) M6 ～ M8 Meter High Carbon Steel (C with a content over 0.45%)[○] 1 ～ 1.25 High-speed steel Point tap For through hole 5P Other Available 62 ～ 70 From: 296,610 VND Days to Ship: Số ngày giao hàng: 8 Day(s) or more
8 Day(s) or more
-
You can add up to 6 items per a category to the compare list.
Spiral Fluted Taps for Stainless Steels, Deep Hole Use_LS-SU-S-SP
YAMAWA MFG
[Features]· A long-shank short-spiral tap for stainless steel; ideal for machining pilot holes into stainless steel—a material which tends to become viscous when machining—as well as chrome steels and molybdenum steels.· Can also be used for deep tapping operations.
Screw size (Nominal) Screw Types work material Pitch (P), Number of Threading(mm) Tool Material Type Tap Type Hole type Chamfer threads (Lcf) Coating Type Coating Y/N Overall Length (L)(mm) M3 ～ M24 Meter High Carbon Steel (C with a content over 0.45%)[○] / Stainless steel (SUS)[○] 0.5 ～ 3 High-speed steel Spiral Tap For blind hole 2.5P Other Available 100 ～ 200 From: 582,981 VND Days to Ship: Số ngày giao hàng: 7 Day(s) or more
7 Day(s) or more
-
You can add up to 6 items per a category to the compare list.
Long Shank Spiral Fluted Taps with Long Neck_LS-SP-K
YAMAWA MFG
[Features]· A long-shank spiral tap with a long neck. Used for deep tapping.
Screw size (Nominal) Screw Types work material Pitch (P), Number of Threading(mm) Tool Material Type Tap Type Hole type Chamfer threads (Lcf) Coating Type Coating Y/N Overall Length (L)(mm) M3 ～ M6 Meter Medium carbon steel (carbon content 0.25 to 0.45%)[○] / High Carbon Steel (C with a content over 0.45%)[○] 0.5 ～ 1 High-speed steel Spiral Tap For blind hole 2.5P - NA 100 ～ 150 From: 489,871 VND Days to Ship: Số ngày giao hàng: 8 Day(s) or more
8 Day(s) or more
-
You can add up to 6 items per a category to the compare list.
Spiral Pointed Taps for Aluminum Materials (for Helical Coil Wire Screw Thread Inserts)_AL-PO-STI
YAMAWA MFG
[Features]· A part for use with comparatively soft materials such as aluminum. For female thread machining so that insert coils can be inserted with the purpose of reinforcing female threads and increasing durability.· Especially for through holes.
Screw size (Nominal) Screw Types work material Pitch (P), Number of Threading(mm) Tool Material Type Tap Type Hole type Chamfer threads (Lcf) Coating Type Coating Y/N Overall Length (L)(mm) STI M3 ～ STI M12 Meter Copper (Cu)[○] / Brass (Bs)[○] / Brass cast iron (BsC)[○] / Aluminum Rolled Material (AL)[○] / Aluminum Alloy Casting (AC, ADC)[○] / Magnesium Alloy (MC)[○] / Zinc Alloy Casting (ZDC)[○] 0.5 ～ 1.75 High-speed steel Point tap For through hole 5P - NA 52 ～ 95 From: 472,726 VND Days to Ship: Số ngày giao hàng: 7 Day(s) or more
7 Day(s) or more
-
You can add up to 6 items per a category to the compare list.
YAMAWA MFG
[Features]· A long-shank spiral tap for through holes. For use in high-speed machining between 15 m/min and 25 m/min.
Screw size (Nominal) Screw Types work material Pitch (P), Number of Threading(mm) Tool Material Type Tap Type Hole type Chamfer threads (Lcf) Coating Type Coating Y/N Overall Length (L)(mm) M3 ～ M30 Meter Low-Carbon Steel (carbon alloy less than 0.25%)[○] / Medium carbon steel (carbon content 0.25 to 0.45%)[○] 0.5 ～ 3.5 High-speed steel Spiral Tap For through hole 5P ～ 5.5P - Available 100 ～ 200 From: 956,798 VND Days to Ship: Số ngày giao hàng: 8 Day(s) or more
8 Day(s) or more
-
You can add up to 6 items per a category to the compare list.
Spiral Fluted Taps for High Speed Tapping_LS-F-SP
YAMAWA MFG
[Features]· A long-shank spiral tap for use in high-speed machining between 15 m/min and 25 m/min.
Screw size (Nominal) Screw Types work material Pitch (P), Number of Threading(mm) Tool Material Type Tap Type Hole type Chamfer threads (Lcf) Coating Type Coating Y/N Overall Length (L)(mm) M3 ～ M30 Meter Low-Carbon Steel (carbon alloy less than 0.25%)[○] / Medium carbon steel (carbon content 0.25 to 0.45%)[○] 0.5 ～ 3.5 High-speed steel Spiral Tap For blind hole 2.5P ～ 3P - Available 100 ～ 200 From: 956,798 VND Days to Ship: Số ngày giao hàng: 8 Day(s) or more
8 Day(s) or more
-
You can add up to 6 items per a category to the compare list.
A Spiral Flute Left Hand Trapezoidal Thread Tap Spiral Tap_SL-LH-Tr
YAMAWA MFG
[Features]· The angle of the thread crest is 30°.· The symbol used for the thread is represented by "Tr."
Screw size (Nominal) Screw Types work material Pitch (P), Number of Threading(mm) Tool Material Type Tap Type Hole type Chamfer threads (Lcf) Coating Type Coating Y/N Overall Length (L)(mm) Tr 10 ～ Tr 30 Trapezoid Low-Carbon Steel (carbon alloy less than 0.25%)[○] / Medium carbon steel (carbon content 0.25 to 0.45%)[○] 2 ～ 6 High-speed steel Spiral Tap For through hole 22P ～ 30P - NA 160 ～ 300 From: 11,002,378 VND Days to Ship: Số ngày giao hàng: 7 Day(s) or more
7 Day(s) or more
-
You can add up to 6 items per a category to the compare list.
SMATO
Screw size (Nominal) Screw Types work material Pitch (P), Number of Threading(mm) Tool Material Type Tap Type Hole type Chamfer threads (Lcf) Coating Type Coating Y/N Overall Length (L)(mm) - - - - - - - - - - - From: 387,961 VND Days to Ship: Số ngày giao hàng: 6 Day(s)
6 Day(s)
-
You can add up to 6 items per a category to the compare list.
DLC Coated Carbide Threading Cutter for Aluminum Machining, for Internal Metric Threads / 2D Model
MISUMI
[Features]·Carbide thread mill cutter capable of high-speed stable machining·Can be used for both blind holes and through holes·DLC coating with excellent abrasion resistance and chip-weld resistance makes it ideal for Non steel metals such as Aluminum and Copper
- Volume Discount
Screw size (Nominal) Screw Types work material Pitch (P), Number of Threading(mm) Tool Material Type Tap Type Hole type Chamfer threads (Lcf) Coating Type Coating Y/N Overall Length (L)(mm) M3 ～ M16 Meter Ductile Cast Iron (FCD)[○] / Copper (Cu)[○] / Brass (Bs)[○] / Brass cast iron (BsC)[○] / Bronze (Pb)[◎] / Aluminum Rolled Material (AL)[◎] 0.5 ～ 2 Carbide Thread cutter For through hole / For blind hole - DLC Available 57 ～ 92 From: 3,376,609 VND Days to Ship: Số ngày giao hàng: 4 Day(s) or more
4 Day(s) or more
-
You can add up to 6 items per a category to the compare list.
TiAlN Coated Carbide Threading Cutter, for High-Hardness Steel / for Internal Metric Threads
MISUMI
The left-flute left-rotary cutting that's achieved by the original geometry and coating allow the milling threading of high hardness steel of up to HRC62.
- Volume Discount
Screw size (Nominal) Screw Types work material Pitch (P), Number of Threading(mm) Tool Material Type Tap Type Hole type Chamfer threads (Lcf) Coating Type Coating Y/N Overall Length (L)(mm) M2 ～ M12 Meter Low-Carbon Steel (carbon alloy less than 0.25%)[○] / Medium carbon steel (carbon content 0.25 to 0.45%)[○] / High Carbon Steel (C with a content over 0.45%)[○] / Alloy Steel (SCM)[○] / Stainless steel (SUS)[○] / Quenched and tempered steel (25 to 35 HRC)[◎] / Quenched and tempered steel (35 to 45 HRC)[◎] / Quenched and tempered steel (45 to 55 HRC)[◎] / High Hardness Steel (50-60 HRC)[◎] / Tool Steel (Before SKD Hardening)[○] / Steel casting (SC)[○] / Cast Iron (FC)[○] / Ductile Cast Iron (FCD)[○] / Copper (Cu)[○] / Brass (Bs)[○] / Brass cast iron (BsC)[○] / Bronze (Pb)[○] / Aluminum Rolled Material (AL)[○] 0.4 ～ 1.75 Carbide Thread cutter For through hole / For blind hole - TiAlN Available 58 ～ 73 From: 7,894,879 VND Days to Ship: Số ngày giao hàng: 6 Day(s) or more
6 Day(s) or more
-
You can add up to 6 items per a category to the compare list.
TiAlN Coated Carbide Threading Cutter for Inner Diameter Metric Threads (manufactured by Carmex)
MISUMI
[Features]·Small diameter thread cutting from M1.4 × 0.3 (Pilot hole diameter ø1.1 mm) is possible·Reduced cutting load due to short flute length (3 ridges)·Enables effective thread cutting to corners of blind holes
- Volume Discount
Screw size (Nominal) Screw Types work material Pitch (P), Number of Threading(mm) Tool Material Type Tap Type Hole type Chamfer threads (Lcf) Coating Type Coating Y/N Overall Length (L)(mm) M1.4 ～ M20 Meter Low-Carbon Steel (carbon alloy less than 0.25%)[◎] / Medium carbon steel (carbon content 0.25 to 0.45%)[◎] / High Carbon Steel (C with a content over 0.45%)[◎] / Alloy Steel (SCM)[◎] / Stainless steel (SUS)[○] / Quenched and tempered steel (25 to 35 HRC)[○] / Tool Steel (Before SKD Hardening)[○] / Steel casting (SC)[○] / Cast Iron (FC)[○] / Ductile Cast Iron (FCD)[○] / Copper (Cu)[○] / Brass (Bs)[○] / Brass cast iron (BsC)[○] / Bronze (Pb)[○] / Aluminum Rolled Material (AL)[○] 0.3 ～ 2.5 Carbide Thread cutter For through hole / For blind hole - TiAlN Available 39 ～ 105 From: 6,588,067 VND Days to Ship: Số ngày giao hàng: 6 Day(s) or more
6 Day(s) or more
-
You can add up to 6 items per a category to the compare list.
Stainless Steel Machining Tap, Point Tap / Spiral Tap
MISUMI
in order to allow the small diameter tapping of stainless steel that's most prone to breakage, it is given the special surface treatment.
- Volume Discount
Screw size (Nominal) Screw Types work material Pitch (P), Number of Threading(mm) Tool Material Type Tap Type Hole type Chamfer threads (Lcf) Coating Type Coating Y/N Overall Length (L)(mm) M4 ～ M5 Meter Low-Carbon Steel (carbon alloy less than 0.25%)[○] / Medium carbon steel (carbon content 0.25 to 0.45%)[○] / High Carbon Steel (C with a content over 0.45%)[○] / Stainless steel (SUS)[◎] / Steel casting (SC)[○] / Cast Iron (FC)[○] / Ductile Cast Iron (FCD)[○] / Copper (Cu)[○] / Brass (Bs)[○] / Brass cast iron (BsC)[○] / Bronze (Pb)[○] 0.7 ～ 0.8 Vanadium High-Speed Steel Spiral Tap For blind hole - - NA 52 ～ 60 From: 1,806,128 VND Days to Ship: Số ngày giao hàng: Same day
Same day
-
You can add up to 6 items per a category to the compare list.
POWERCOIL
Screw size (Nominal) Screw Types work material Pitch (P), Number of Threading(mm) Tool Material Type Tap Type Hole type Chamfer threads (Lcf) Coating Type Coating Y/N Overall Length (L)(mm) - - - - - - - - - - - From: 1,630,753 VND Days to Ship: Số ngày giao hàng: 4 Day(s)
4 Day(s)
-
You can add up to 6 items per a category to the compare list.
POWERCOIL
Screw size (Nominal) Screw Types work material Pitch (P), Number of Threading(mm) Tool Material Type Tap Type Hole type Chamfer threads (Lcf) Coating Type Coating Y/N Overall Length (L)(mm) 2~2.5 ～ 27~36 Meter - 1-1/8-7~1-1/26 ～ 10-24~5/16-18 - Modification/removal Tool - - - - - From: 700,065 VND Days to Ship: Số ngày giao hàng: 4 Day(s) or more
4 Day(s) or more
-
You can add up to 6 items per a category to the compare list.
Screw Insert (16 IR / 16U ER/L)
CARMEX
Screw size (Nominal) Screw Types work material Pitch (P), Number of Threading(mm) Tool Material Type Tap Type Hole type Chamfer threads (Lcf) Coating Type Coating Y/N Overall Length (L)(mm) - - - 4 ～ 8 - - - - - - 16 ～ 22U From: 379,305 VND Days to Ship: Số ngày giao hàng: 4 Day(s)
4 Day(s)
-
You can add up to 6 items per a category to the compare list.
Screw Insert (16 ER B / 16V ER)
CARMEX
Screw size (Nominal) Screw Types work material Pitch (P), Number of Threading(mm) Tool Material Type Tap Type Hole type Chamfer threads (Lcf) Coating Type Coating Y/N Overall Length (L)(mm) - - - - - - - - - - 16 From: 362,820 VND Days to Ship: Số ngày giao hàng: 4 Day(s)
4 Day(s)
-
You can add up to 6 items per a category to the compare list.
Screw Insert-Whitworth-55° (16 IL / 16 ER)
CARMEX
Screw size (Nominal) Screw Types work material Pitch (P), Number of Threading(mm) Tool Material Type Tap Type Hole type Chamfer threads (Lcf) Coating Type Coating Y/N Overall Length (L)(mm) - - - - - - - - - - 16 From: 422,445 VND Days to Ship: Số ngày giao hàng: 4 Day(s)
4 Day(s)
-
You can add up to 6 items per a category to the compare list.
Screw Insert-NPT (16 ER / 16IR)
CARMEX
Screw size (Nominal) Screw Types work material Pitch (P), Number of Threading(mm) Tool Material Type Tap Type Hole type Chamfer threads (Lcf) Coating Type Coating Y/N Overall Length (L)(mm) - - - - - - - - - - 16 From: 422,445 VND Days to Ship: Số ngày giao hàng: 4 Day(s)
4 Day(s)
-
You can add up to 6 items per a category to the compare list.
Screw Insert-Whitworth-55° (16 IL 11 W)
CARMEX
Screw size (Nominal) Screw Types work material Pitch (P), Number of Threading(mm) Tool Material Type Tap Type Hole type Chamfer threads (Lcf) Coating Type Coating Y/N Overall Length (L)(mm) - - - - - - - - - - 16 From: 362,820 VND Days to Ship: Số ngày giao hàng: 4 Day(s)
4 Day(s)
| BrandNhãn hiệu |
|---|
| Product SeriesDòng sản phẩm |
| From |
| Days to ShipSố ngày giao hàng |
| Screw size (Nominal) |
| Screw Types |
| work material |
| Pitch (P), Number of Threading(mm) |
| Tool Material Type |
| Tap Type |
| Hole type |
| Chamfer threads (Lcf) |
| Coating Type |
| Coating Y/N |
| Overall Length (L)(mm) |
You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list. | You can add up to 6 items per a category to the compare list. | You can add up to 6 items per a category to the compare list. | You can add up to 6 items per a category to the compare list. | You can add up to 6 items per a category to the compare list. | You can add up to 6 items per a category to the compare list. | You can add up to 6 items per a category to the compare list. | You can add up to 6 items per a category to the compare list. | You can add up to 6 items per a category to the compare list. | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list. | You can add up to 6 items per a category to the compare list. | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list. | You can add up to 6 items per a category to the compare list. | You can add up to 6 items per a category to the compare list. | You can add up to 6 items per a category to the compare list. | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.    | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | |
| BrandNhãn hiệu | ISHIHASHI | ISHIHASHI | ISHIHASHI | ISHIHASHI | ISHIHASHI | ISHIHASHI | ISHIHASHI | ISHIHASHI | ISHIHASHI | ISHIHASHI | ONISHI MANUFACTURING | ISHIHASHI | ISHIHASHI | ISHIHASHI | ISHIHASHI | ISHIHASHI | ISHIHASHI | ISHIHASHI | NACHI(FUJIKOSHI) | CARMEX | SMATO | SMATO | ENGINEER | YAMAWA MFG | YAMAWA MFG | TRUSCO NAKAYAMA | YAMAWA MFG | YAMAWA MFG | YAMAWA MFG | YAMAWA MFG | YAMAWA MFG | YAMAWA MFG | YAMAWA MFG | SMATO | MISUMI | MISUMI | MISUMI | MISUMI | POWERCOIL | POWERCOIL | CARMEX | CARMEX | CARMEX | CARMEX | CARMEX |
| Product SeriesDòng sản phẩm | TRUSCO Hexagonal Die & Gas Pipe Tap Set For PS Screws【12 Pieces Per Package】 | Oxidized Spiral Pointed Taps for High Carbon Steels_HC-PO-OX | Spiral Fluted Taps for Stainless Steels, Deep Hole Use_LS-SU-S-SP | Spiral Pointed Taps for Aluminum Materials (for Helical Coil Wire Screw Thread Inserts)_AL-PO-STI | A Spiral Flute Left Hand Trapezoidal Thread Tap Spiral Tap_SL-LH-Tr | DLC Coated Carbide Threading Cutter for Aluminum Machining, for Internal Metric Threads / 2D Model | TiAlN Coated Carbide Threading Cutter, for High-Hardness Steel / for Internal Metric Threads | TiAlN Coated Carbide Threading Cutter for Inner Diameter Metric Threads (manufactured by Carmex) | |||||||||||||||||||||||||||||||||||||
| From | 1,653,461 VND | 766,686 VND | 992,642 VND | 406,315 VND | 1,670,991 VND | 559,270 VND | 2,274,186 VND | 2,906,868 VND | 613,731 VND | 1,115,205 VND | 497,624 VND | 1,258,093 VND | 454,999 VND | 922,361 VND | 559,270 VND | 2,267,016 VND | 2,267,016 VND | 562,746 VND | 801,414 VND | 2,225,236 VND | 396,277 VND | 494,278 VND | 1,061,636 VND | 550,062 VND | 2,664,500 VND | 25,642,000 VND | 296,610 VND | 582,981 VND | 489,871 VND | 472,726 VND | 956,798 VND | 956,798 VND | 11,002,378 VND | 387,961 VND | 3,376,609 VND | 7,894,879 VND | 6,588,067 VND | 1,806,128 VND | 1,630,753 VND | 700,065 VND | 379,305 VND | 362,820 VND | 422,445 VND | 422,445 VND | 362,820 VND |
| Days to ShipSố ngày giao hàng | 16 Day(s) | 13 Day(s) | 13 Day(s) | 13 Day(s) | 16 Day(s) | 13 Day(s) | 16 Day(s) | 16 Day(s) | 13 Day(s) | 13 Day(s) | 13 Day(s) | 9 Day(s) | 9 Day(s) | 8 Day(s) | 13 Day(s) | 16 Day(s) | 16 Day(s) | 13 Day(s) | 6 Day(s) or more | 4 Day(s) or more | 4 Day(s) or more | 4 Day(s) or more | 9 Day(s) | 8 Day(s) or more | 8 Day(s) or more | 9 Day(s) | 8 Day(s) or more | 7 Day(s) or more | 8 Day(s) or more | 7 Day(s) or more | 8 Day(s) or more | 8 Day(s) or more | 7 Day(s) or more | 6 Day(s) | 4 Day(s) or more | 6 Day(s) or more | 6 Day(s) or more | Same day | 4 Day(s) | 4 Day(s) or more | 4 Day(s) | 4 Day(s) | 4 Day(s) | 4 Day(s) | 4 Day(s) |
| Screw size (Nominal) | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | M3 ～ M17 | - | M3 ～ M20 | PF1-11 ～ PF3/8-19 | - | M6 ～ M16 | 1 ～ 3/8 | - | M6 ～ M8 | M3 ～ M24 | M3 ～ M6 | STI M3 ～ STI M12 | M3 ～ M30 | M3 ～ M30 | Tr 10 ～ Tr 30 | - | M3 ～ M16 | M2 ～ M12 | M1.4 ～ M20 | M4 ～ M5 | - | 2~2.5 ～ 27~36 | - | - | - | - | - |
| Screw Types | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | Meter | - | Meter | - | - | Meter | Taper for Pipe | Parallel for Pipes | Meter | Meter | Meter | Meter | Meter | Meter | Trapezoid | - | Meter | Meter | Meter | Meter | - | Meter | - | - | - | - | - |
| work material | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | Low-Carbon Steel (carbon alloy less than 0.25%)[○] / Medium carbon steel (carbon content 0.25 to 0.45%)[◎] / High Carbon Steel (C with a content over 0.45%)[◎] / Alloy Steel (SCM)[○] / Stainless steel (SUS)[○] / Quenched and tempered steel (25 to 35 HRC)[○] / Ductile Cast Iron (FCD)[○] / Copper (Cu)[○] / Aluminum Rolled Material (AL)[○] / Aluminum Alloy Casting (AC, ADC)[○] | - | - | - | - | Low-Carbon Steel (carbon alloy less than 0.25%)[○] / Medium carbon steel (carbon content 0.25 to 0.45%)[○] / High Carbon Steel (C with a content over 0.45%)[◎] / Alloy Steel (SCM)[○] / Stainless steel (SUS)[○] / Quenched and tempered steel (25 to 35 HRC)[◎] / Tool Steel (Before SKD Hardening)[○] | - | - | High Carbon Steel (C with a content over 0.45%)[○] | High Carbon Steel (C with a content over 0.45%)[○] / Stainless steel (SUS)[○] | Medium carbon steel (carbon content 0.25 to 0.45%)[○] / High Carbon Steel (C with a content over 0.45%)[○] | Copper (Cu)[○] / Brass (Bs)[○] / Brass cast iron (BsC)[○] / Aluminum Rolled Material (AL)[○] / Aluminum Alloy Casting (AC, ADC)[○] / Magnesium Alloy (MC)[○] / Zinc Alloy Casting (ZDC)[○] | Low-Carbon Steel (carbon alloy less than 0.25%)[○] / Medium carbon steel (carbon content 0.25 to 0.45%)[○] | Low-Carbon Steel (carbon alloy less than 0.25%)[○] / Medium carbon steel (carbon content 0.25 to 0.45%)[○] | Low-Carbon Steel (carbon alloy less than 0.25%)[○] / Medium carbon steel (carbon content 0.25 to 0.45%)[○] | - | Ductile Cast Iron (FCD)[○] / Copper (Cu)[○] / Brass (Bs)[○] / Brass cast iron (BsC)[○] / Bronze (Pb)[◎] / Aluminum Rolled Material (AL)[◎] | Low-Carbon Steel (carbon alloy less than 0.25%)[○] / Medium carbon steel (carbon content 0.25 to 0.45%)[○] / High Carbon Steel (C with a content over 0.45%)[○] / Alloy Steel (SCM)[○] / Stainless steel (SUS)[○] / Quenched and tempered steel (25 to 35 HRC)[◎] / Quenched and tempered steel (35 to 45 HRC)[◎] / Quenched and tempered steel (45 to 55 HRC)[◎] / High Hardness Steel (50-60 HRC)[◎] / Tool Steel (Before SKD Hardening)[○] / Steel casting (SC)[○] / Cast Iron (FC)[○] / Ductile Cast Iron (FCD)[○] / Copper (Cu)[○] / Brass (Bs)[○] / Brass cast iron (BsC)[○] / Bronze (Pb)[○] / Aluminum Rolled Material (AL)[○] | Low-Carbon Steel (carbon alloy less than 0.25%)[◎] / Medium carbon steel (carbon content 0.25 to 0.45%)[◎] / High Carbon Steel (C with a content over 0.45%)[◎] / Alloy Steel (SCM)[◎] / Stainless steel (SUS)[○] / Quenched and tempered steel (25 to 35 HRC)[○] / Tool Steel (Before SKD Hardening)[○] / Steel casting (SC)[○] / Cast Iron (FC)[○] / Ductile Cast Iron (FCD)[○] / Copper (Cu)[○] / Brass (Bs)[○] / Brass cast iron (BsC)[○] / Bronze (Pb)[○] / Aluminum Rolled Material (AL)[○] | Low-Carbon Steel (carbon alloy less than 0.25%)[○] / Medium carbon steel (carbon content 0.25 to 0.45%)[○] / High Carbon Steel (C with a content over 0.45%)[○] / Stainless steel (SUS)[◎] / Steel casting (SC)[○] / Cast Iron (FC)[○] / Ductile Cast Iron (FCD)[○] / Copper (Cu)[○] / Brass (Bs)[○] / Brass cast iron (BsC)[○] / Bronze (Pb)[○] | - | - | - | - | - | - | - |
| Pitch (P), Number of Threading(mm) | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | 0.35 ～ 3 | - | 0.5 ～ 2.5 | - | - | 1 ～ 1.75 | 11.5 ～ 27 | - | 1 ～ 1.25 | 0.5 ～ 3 | 0.5 ～ 1 | 0.5 ～ 1.75 | 0.5 ～ 3.5 | 0.5 ～ 3.5 | 2 ～ 6 | - | 0.5 ～ 2 | 0.4 ～ 1.75 | 0.3 ～ 2.5 | 0.7 ～ 0.8 | - | 1-1/8-7~1-1/26 ～ 10-24~5/16-18 | 4 ～ 8 | - | - | - | - |
| Tool Material Type | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | Alloy HSS | - | SKS | High-speed steel | - | Cobalt HSS | High-speed steel | - | High-speed steel | High-speed steel | High-speed steel | High-speed steel | High-speed steel | High-speed steel | High-speed steel | - | Carbide | Carbide | Carbide | Vanadium High-Speed Steel | - | - | - | - | - | - | - |
| Tap Type | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | Spiral Tap | - | Die | Tap for pipes | Hand Tap | Spiral Tap | Die | Tap for pipes | Point tap | Spiral Tap | Spiral Tap | Point tap | Spiral Tap | Spiral Tap | Spiral Tap | - | Thread cutter | Thread cutter | Thread cutter | Spiral Tap | - | Modification/removal Tool | - | - | - | - | - |
| Hole type | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | For through hole / For blind hole | - | - | - | - | For through hole | - | - | For through hole | For blind hole | For blind hole | For through hole | For through hole | For blind hole | For through hole | - | For through hole / For blind hole | For through hole / For blind hole | For through hole / For blind hole | For blind hole | - | - | - | - | - | - | - |
| Chamfer threads (Lcf) | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | 2.5 | - | - | - | - | 5P ～ 7P | - | - | 5P | 2.5P | 2.5P | 5P | 5P ～ 5.5P | 2.5P ～ 3P | 22P ～ 30P | - | - | - | - | - | - | - | - | - | - | - | - |
| Coating Type | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | Other | Non-Coated | - | Other | Other | - | - | - | - | - | - | DLC | TiAlN | TiAlN | - | - | - | - | - | - | - | - |
| Coating Y/N | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | Available | - | - | NA | - | Available | NA | - | Available | Available | NA | NA | Available | Available | NA | - | Available | Available | Available | NA | - | - | - | - | - | - | - |
| Overall Length (L)(mm) | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | 150 ～ 200 | - | - | - | - | 62 ～ 95 | - | - | 62 ～ 70 | 100 ～ 200 | 100 ～ 150 | 52 ～ 95 | 100 ～ 200 | 100 ～ 200 | 160 ～ 300 | - | 57 ～ 92 | 58 ～ 73 | 39 ～ 105 | 52 ～ 60 | - | - | 16 ～ 22U | 16 | 16 | 16 | 16 |
Loading...Tải…
ConfigureTạo
Specification/DimensionsĐặc điểm kỹ thuật / Kích thướcĐặc điểm kỹ thuật / Kích thước
-
Screw size (Nominal)
- CTG-54
- CTG-42
- CTG-36
- CTG-28
- CTG-22
- CTG-16
- NPT-1-11-1-2
- No.0
- No.0UN
- NO.0-80UNF
- No.10
- No.1
- No.1UN
- No.10UN
- S0.1
- NO.1-72UNF
- NO.1-64UNC
- NO.10-32UNF
- No.10-32UNF
- NO.10-24UNC
- No.10-24UNC
- No.12
- No.12UN
- NO.12-28UNF
- No.12-28UNF
- NO.12-24UNC
- No.12-24UNC
- No.2
- No.2UN
- S0.2
- NO.2-64UNF
- No.2-64UNF
- NO.2-56UNC
- No.2-56UNC
- No.3
- No.3UN
- S0.3
- NO.3-56UNF
- No.3-56UNF
- NO.3-48UNC
- No.3-48UNC
- No.4
- No.4UN
- S0.4
- NO.4-48UNF
- No.4-48UNF
- NO.4-40UNC
- No.4-40UNC
- No.5
- No.5UN
- S0.5
- NO.5-44UNF
- No.5-44UNF
- NO.5-40UNC
- No.5-40UNC
- 0.6
- No.6
- No.6UN
- S0.6
- NO.6-40UNF
- No.6-32UNC
- S0.7
- No.8
- No.8UN
- S0.8
- NO.8-36UNF
- No.8-36UNF
- NO.8-32UNC
- No.8-32UNC
- S0.9
- 1
- 1"
- 1UN
- 1UNS
- G1
- M1
- NPS1
- NPT1
- NPT 1"
- NPTF1
- PF1
- PF 1
- PF 1"
- PS1
- PS 1
- PS 1"
- PT1
- PT1"
- PT 1
- PT 1"
- R1
- Rp1
- S1
- UNC1
- UNF1
- W1
- 1"-12
- 1'-11.5
- 1'-11
- PF1-11
- PT1-11
- 1-8UNC
- 1"-8
- 1"-8UNC
- PS1-1/2
- PS1-1/4
- 1 1/2
- 1"1/2UN
- G1"1/2
- NPS1"1/2
- NPT1"1/2
- NPT 1"1/2
- PF 1"1/2
- PS1"1/2
- PT1"1/2
- PT 1 1/2
- R1"1/2
- W1"1/2
- 1'1/2-11
- 1 1/2-8UN
- 1 1/4
- 1"1/4UN
- G1"1/4
- NPS1"1/4
- NPT1"1/4
- PF 1"1/4
- PS1"1/4
- PT1"1/4
- PT 1 1/4
- PT 1"1/4
- R1"1/4
- W1"1/4
- 1'1/4-11.5
- 1'1/4-11
- 1 1/4-8UN
- 1 1/8
- 1"1/8UN
- G1"1/8
- PS1"1/8
- R1"1/8
- W1"1/8
- 1'1/8-11
- 1 1/8-8UN
- 1 1/16
- 1"1/16UN
- 1/2
- 1/2UN
- G1/2
- NPS1/2
- NPT1/2
- NPT 1/2
- NPTF1/2
- PF1/2
- PF 1/2
- PS1/2
- PS 1/2
- PT1/2
- PT 1/2
- R1/2
- Rc1/2
- Rp1/2
- UNC1/2
- UNF1/2
- W1/2
- 1/2-20
- 1/2-20UNF
- 1/2-14
- PF1/2-14
- PT1/2-14
- 1/2-13
- 1/2-13UNC
- 1/2-12
- 1/2-12W
- 1/2(1/16'-1/2)
- 1/2W12
- 1/2 - 13
- 1/2 - 20
- 1 3/4
- 1"3/4UN
- G1"3/4
- R1"3/4
- W1"3/4
- 1'3/4-11
- 1 3/4-8UN
- 1"3/4-5UNC
- 1 3/8
- 1"3/8UN
- G1"3/8
- PS1"3/8
- R1"3/8
- W1"3/8
- 1 3/8-8UN
- 1/4
- 1/4UN
- 1/4UNJ
- G1/4
- NPS1/4
- NPT1/4
- NPT 1/4
- NPTF1/4
- PF1/4
- PF 1/4
- PS1/4
- PS 1/4
- PT1/4
- PT 1/4
- R1/4
- Rc1/4
- Rp1/4
- SM1/4
- UNC1/4
- UNF1/4
- W1/4
- 1/4-28
- 1/4-28UNF
- 1/4-20
- 1/4-20UNC
- 1/4-19
- PF1/4-19
- PT1/4-19
- 1/4-18
- 1/4(1/16'-1/4)
- 1/4 - 20
- 1/4W20
- 1 5/8
- W1"5/8
- 1 5/8-8UN
- M1 to 6
- W1"7/8
- 1 7/8-8UN
- 1" - 8
- 1'W8
- 1/8
- G1/8
- NPS1/8
- NPT1/8
- NPT 1/8
- NPTF1/8
- PF1/8
- PF 1/8
- PS1/8
- PS 1/8
- PT1/8
- PT 1/8
- R1/8
- Rc1/8
- Rp1/8
- SM1/8
- W1/8
- 1/8-40W
- 1/8-28
- PF1/8-28
- PT1/8-28
- 1/8-27
- 1/8-18
- M1 to 10
- 1 12
- 1" - 12
- 1" - 14
- 1/16
- G1/16
- NPS1/16
- NPT1/16
- NPT 1/16
- PT1/16
- PT 1/16
- R1/16
- 1/16-28
- 1/16-27
- 1 20
- M1.1
- M1.2
- S1.2
- 1.25
- M1.4
- S1.4
- 1.5
- M1.6
- M1.7
- M1.8
- 2
- 2UN
- G2
- M2
- M2.0
- NPS2
- NPT2
- NPT 2"
- PF 2"
- PS 2
- PS 2"
- PT2"
- PT 2
- PT 2"
- R2
- W2
- W/2
- NO 2-56
- 2'-11.5
- 2'-11
- 2-8UN
- 2'1/2-11
- W2"1/4
- 2'1/4-11
- 2~2.5
- 2 4.5
- M2 to 4.5
- M2.2
- M 2.2
- M2.3
- M2.5
- M2.6
- 3
- 3M
- M3
- M3.0
- M 3
- M 3.0
- STI M3
- 3'-11
- PS3-8-19
- NPT3-8-18
- 3/4
- 3/4UN
- G3/4
- NPS3/4
- NPT3/4
- NPT 3/4
- NPTF3/4
- PF3/4
- PF 3/4
- PS3/4
- PS 3/4
- PT3/4
- PT 3/4
- R3/4
- Rp3/4
- UNC3/4
- UNF3/4
- W3/4
- 3/4-16
- 3/4-16UNF
- 3/4-14
- PF3/4-14
- PT3/4-14
- 3/4-10
- 3/4-10UNC
- 3/4 - 10
- 3/4W10
- 3/4 - 16
- 3/8
- 3/8-UNJ
- 3/8UN
- G3/8
- NPS3/8
- NPT3/8
- NPT 3/8
- NPTF3/8
- PF3/8
- PF 3/8
- PS3/8
- PS 3/8
- PT3/8
- PT 3/8
- R3/8
- Rc3/8
- Rp3/8
- UNC3/8
- UNF3/8
- W3/8
- 3/8-24
- 3/8-24UNF
- 3/8-19
- PF3/8-19
- PT3/8-19
- 3/8-18
- 3/8-16
- 3/8-16UNC
- 3/8 - 16
- 3/8W16
- 3/8 - 24
- 3~10
- M3 to 10
- 3/16
- SM3/16
- W3/16
- 3/16-32SM
- 3/16-24W
- 3/32
- SM3/32
- # 3 - 48
- # 3 - 56
- 3.5
- M3.5
- M3.5
- 4
- 4M
- M4
- M4.0
- M 4
- M 4.0
- STI M4
- NO 4-40
- M4 to 6
- M4 to 13
- # 4 - 40
- # 4 - 48
- M4.5
- M4.5
- 5
- 5M
- M5
- M5.0
- M5
- M 5
- M 5.0
- STI M5
- 5/8
- 5/8UN
- G5/8
- NPS5/8
- PS5/8
- PT5/8
- R5/8
- UNC5/8
- UNF5/8
- W5/8
- 5/8-18
- 5/8-18UNF
- 5/8-14
- 5/8-11
- 5/8-11UNC
- 5/8 - 11
- 5/8W11
- 5/8 - 18
- M5 to 10
- M5-M12
- M5 to 13
- 5/16
- 5/16UN
- 5/16UNJ
- UNC5/16
- UNF5/16
- W5/16
- 5/16-24
- 5/16-24UNF
- 5/16-18
- 5/16-18UNC
- 5/16 - 18
- 5/16W18
- 5/16 - 24
- 5/32
- W5/32
- 5/32-36 UNC
- 5/32-32W
- # 5 - 40
- 5/64
- 5.5M
- M5.5
- M5.5
- 6
- M6
- M6.0
- M 6
- M 6.0
- STI M6
- No6-40UNF
- 6-32UNC
- NO 6-32
- M6 to 20
- # 6 - 32
- # 6 - 40
- M7
- M7.0
- M7
- M 7.0
- PG7
- 7/8
- 7/8UN
- G7/8
- NPS7/8
- PS7/8
- PT7/8
- R7/8
- UNC7/8
- UNF7/8
- W7/8
- 7/8-14
- 7/8-14UNF
- 7/8-9
- 7/8-9UNC
- 7/8- 9
- 7/8W9
- 7/8- 14
- 7/16
- 7/16UN
- UNC7/16
- UNF7/16
- W7/16
- 7/16-20
- 7/16-20UNF
- 7/16-14UNC
- 7/16 - 14
- 7/16W14
- 7/16 - 20
- 7/32
- SM7/32
- 7/32-24W
- 7/64
- 7.5
- 8
- #8
- M8
- M8.0
- M 8
- M 8.0
- STI M8
- 8-32UNC
- NO 8-32
- # 8 - 32
- # 8 - 36
- 9
- M9
- M9
- PG9
- 9/16
- 9/16UN
- UNF9/16
- W9/16
- 9/16-18
- 9/16-18UNF
- 9/16-12
- 9/16-12UNC
- 9/16 - 12
- 9/16 - 18
- SM9/32
- 9/64
- SM9/64
- 10
- M10
- M10.0
- M10
- STI M10
- Tr 10
- 10-32UNF
- NO 10-32
- NO 10-24
- M10 to 13
- #10 - 24
- M10 to 25
- #10 - 32
- M11
- M11
- PG11
- 11/2
- NPT 11/2
- PF 11/2
- PS 11/2
- PT 11/2
- 11/4
- NPT 11/4
- PF 11/4
- PS 11/4
- PT 11/4
- 11/8
- 11/16
- 11~24
- SM11/32
- 11/64
- SM11/64
- 12
- M12
- M12.0
- M12
- STI M12
- Tr 12
- 12-1.0-2
- #12 - 24
- M13
- 13/4
- 13/8
- 13/16
- 13/32
- PG13.5
- 14
- M14
- M14.0
- M14
- Tr 14
- M15
- 15/8
- 15/64
- SM15/64
- 16
- M16
- M16.0
- M16
- PG16
- Tr 16
- M17
- 17/8
- 17/16
- 17/32
- 17/64
- 18
- M18
- M18.0
- M18
- Tr 18
- M19
- M19 to 32
- M19 to 38
- 20
- M20
- M20.0
- M20
- Tr 20
- M21
- PG21
- 22
- M22
- M22.0
- M22
- M22X
- Tr 22
- 22-1.0
- M23
- 24
- M24
- M24.0
- M24
- M24X
- Tr 24
- 24-2.0-2
- 25
- M25
- M25X
- Tr 25
- M25 to 50
- M25 to 70
- M26
- Tr 26
- M27
- M27.0
- 27~36
- M28
- Tr 28
- PG29
- 30
- M30
- M30.0
- Tr 30
- M32
- 33
- M33
- M34
- M35
- 36
- M36
- PG36
- M37
- M38
- M39
- M40
- M42
- PG42
- M44
- M45
- M46
- M48
- M50
- M56
- M64
- 1015
- 1020N100M
- 1020N150M
- 06510X28R
- 10154
- 12204
- 12254N100M
- 12254N150M
- 12254N200M
- 16304N100M
- 16304N150M
- 16304N200M
- 16304N250M
- 20305
- 20505N100M
- 20505N150M
- 20505N200M
- 20505N300M
- 20505N350M
- 25506N100M
- 25506N150M
- 25506N200M
- 25506N300M
- 25506N350M
- 32506
- 32506N150M
- 32506N200M
- 32506N300M
- 035083N075M
- 035083N080M
- 040123N100M
- 060163N050M
- 060163N100M
- 060163N125M
- 065103X28G
- 075203N125M
- 075203N150M
- 080153X19G
- 080153X19R
- 080203N050M
- 080203N100M
- 090244N125M
- 090244N175M
- 100254N050M
- 100254N100M
- 100254N150M
- 100254N200M
- 120204X14G
- 120204X14R
- 120304N100M
- 120304N150M
- 120304N200M
- 160264X11G
- 160264X11R
- 160404N150M
- 160404N200M
- 160404N250M
- 200305X11G
- 200305X11R
- 200505N150M
- 200505N200M
- 200505N300M
-
Screw Types
-
work material
- Low-Carbon Steel (carbon alloy less than 0.25%)
- Medium carbon steel (carbon content 0.25 to 0.45%)
- High Carbon Steel (C with a content over 0.45%)
- Alloy Steel (SCM)
- Stainless steel (SUS)
- Quenched and tempered steel (25 to 35 HRC)
- Quenched and tempered steel (35 to 45 HRC)
- Quenched and tempered steel (45 to 55 HRC)
- High Hardness Steel (50-60 HRC)
- Tool Steel (Before SKD Hardening)
- Steel casting (SC)
- Cast Iron (FC)
- Ductile Cast Iron (FCD)
- Copper (Cu)
- Brass (Bs)
- Brass cast iron (BsC)
- Bronze (Pb)
- Aluminum Rolled Material (AL)
- Aluminum Alloy Casting (AC, ADC)
- Magnesium Alloy (MC)
- Zinc Alloy Casting (ZDC)
- Titanium Alloy (Ti-6Al-4V, etc)
- Nickel-based alloy (Inconel, etc.)
- Thermosetting plastic (bakelite, phenol, etc.)
- Thermoplastic plastic (vinyl chloride, nylon, etc.)
-
Pitch (P), Number of Threading(mm)
- .02
- 0.025
- 0.05
- 0.08
- 0.1
- 0.125
- 0.15
- 0.175
- 0.2
- 0.225
- 0.25
- 0.3
- 0.35
- 0.4
- 0.45
- 0.5
- 0.6
- 0.7
- 0.75
- 0.75、1.00、1.25、1.50、1.75、2.00、2.50、3.00
- 0.8
- 0.9
- 1
- 1-1/8-7~1-1/26
- 1.2
- 1.25
- 1.5
- 1.7
- 1.75
- 2
- 2-56~8-32
- 2.5
- 3
- 3/8-16~1-8
- 3.5
- 4
- 4 1/2 UNC
- 4.5
- 5
- 5 UNC
- 5.5
- 6
- 6 UNC
- 7
- 7 UNC
- 8
- 8 UNC
- 8 UNS
- 8DØ
- 8J UNS
- 9
- 9 UNC
- 10
- 10 UNC
- 10-24~5/16-18
- 10、11、12、14、16、18、20、24F
- 11
- 11 UNC
- 11 1/2
- 11 1/2DØ
- 11.5
- 12
- 12 UNF
- 12 UNS
- 13
- 13 UNC
- 14
- 14 UNC
- 14 UNF
- 14 UNS
- 14DØ
- 16
- 16 UNC
- 16 UNF
- 16UNC
- 18
- 18 UNC
- 18 UNF
- 18DØ
- 19
- 20
- 20 UNC
- 20 UNF
- 20UNC
- 24
- 24 UNF
- 27
- 27DØ
- 28
- 28 UNF
- 32
- 32UNC
- 36
- 40
- 44
- 48
- 56
- 64
- 72
- 80
- 100
- 150
-
Tool Material Type
-
Tap Type
-
Hole type
-
Chamfer threads (Lcf)
-
Coating Type
-
Coating Y/N
-
Overall Length (L)(mm)
Related Categories to Screw-Hole-Related ToolsDanh mục liên quan đến Screw-Hole-Related Tools
-
- Carbide End Mills
- HSS End Mills
- Milling Cutter Inserts/Holders
- Customized Straight Blade End Mills
- Dedicated Cutters
- Turning Tools
- Drill Bits
- Screw-Hole-Related Tools
- Reamers
- Chamfering / Centering Tools
- Fixtures Related to Cutting Tools
- Step Drills
- Hole Saws
- Clean Key Cutters
- Core Drills (Tip Tools)
- Magnetic Drilling Machine Cutters
- Drill Bits for Electric Drilling Machines
- Woodworking Drill Cutters
- Drills for Concrete
How can we improve?
How can we improve?
While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
Customer Privacy Policy
Thank you for your cooperation.
While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
Please use the inquiry form.
Customer Privacy Policy