(!) Since support from Microsoft will end on January 14th, 2020, Windows 7 will be excluded from the recommended environment from December 15th, 2019 on this site. Vì lý do Microsoft kết thúc hỗ trợ cho Windows 7 vào ngày 14/01/2020, Windows 7 sẽ là hệ điều hành không được khuyến khích sử dụng với trang web này từ ngày 15/12/2019.
Brand |
|
---|---|
Filter By |
|
CAD |
|
Days to Ship |
|
325 itemsMặt hàng
You can add up to 6 items per a category to the compare list.
NACHI(FUJIKOSHI)
3-flute carbide drill capable of high-precision drilling and reamer-less processing.[Features]· High-precision drilling is possible due to the 3-flute cutting edge excellent in cutting balance. It also supports reamer-less processing.· Aqua Drill 3-Flute has a proprietary thinning shape and good sharpness for minimal cutting resistance.· Highly lubricating aqua coating and groove shape for excellent chipping discharge without clogging, enabling consistent hole drilling.[Applications]· High-precision drilling is made possible by the 3-flute cutting edge with excellent cutting balance and negative corner with high centrality.
Hole diameter (drill diameter) D(mm) | Overall Length L(mm) | Groove Length L(mm) | work material | Shank Type | Tool Material Type | With/without Oil Hole | Coating Y/N | Coating Type |
---|---|---|---|---|---|---|---|---|
3 ~ 16 | 48 ~ 144 | 16 ~ 80 | general steel[○] / Quenched and tempered steel[◎] / high hardness steel[◎] / Cast Iron[○] | End Mill Shank / straight shank | Carbide | NA | Available | Other |
From: 686,931 VND |
---|
Days to Ship: Số ngày giao hàng: 6 Day(s) or more |
You can add up to 6 items per a category to the compare list.
Aqua Drill with Bottom Blade 3-Flute AQDED3F
NACHI(FUJIKOSHI)
Coated carbide drill which achieves high efficiency machining of holes in cast materials and screw pilot holes.[Features]· Cast iron and aluminum cast parts have a high performance machined hole with H7 precision.· 3-flute cutting edge with excellent cutting balance minimizes cutting vibration during machining.· Finish processing is possible with work efficiency of 10 times or more compared to a reamer.[Applications]· 3-flute cutting edge with excellent cutting balance ideal for high-quality machining.
Hole diameter (drill diameter) D(mm) | Overall Length L(mm) | Groove Length L(mm) | work material | Shank Type | Tool Material Type | With/without Oil Hole | Coating Y/N | Coating Type |
---|---|---|---|---|---|---|---|---|
3 ~ 12 | 48 ~ 108 | 16 ~ 51 | general steel[◎] / Cast Iron[○] | End Mill Shank / straight shank | Carbide | NA | Available | Other |
From: 1,668,182 VND |
---|
Days to Ship: Số ngày giao hàng: 6 Day(s) or more |
You can add up to 6 items per a category to the compare list.
NACHI(FUJIKOSHI)
Carbide drill capable of high efficiency machining of high-hardness steel of 50 to 70 HRC.[Features]· It uses carbide alloy ideal for high-hardness steel machining and AquaCoat, which has excellent heat resistance and abrasion resistance.· Wear resistance and chipping resistance are greatly improved.· Uses a thick core and weak torsion.· The high rigidity makes it resistant against vibration as well, preventing damage from microchipping, etc.[Applications]· High performance machining of 50 to 70 HRC high hardness steel is possible.
Hole diameter (drill diameter) D(mm) | Overall Length L(mm) | Groove Length L(mm) | work material | Shank Type | Tool Material Type | With/without Oil Hole | Coating Y/N | Coating Type |
---|---|---|---|---|---|---|---|---|
2 ~ 12 | 44 ~ 108 | 12 ~ 51 | high hardness steel[◎] | End Mill Shank / straight shank | Carbide | NA | Available | Other |
From: 629,109 VND |
---|
Days to Ship: Số ngày giao hàng: 4 Day(s) or more |
You can add up to 6 items per a category to the compare list.
OSG
[Features]· Carbide 4D type drill with both high blade tip rigidity and good cutting resistance. Recommended for use on a wide range of materials. Uses an EgiAs coating which boasts excellent wear resistance and toughness, helping achieve a longer tool life. Wide flutes for improved chip discharging Wave-shaped flutes that finely fragment the chips
Hole diameter (drill diameter) D(mm) | Overall Length L(mm) | Groove Length L(mm) | work material | Shank Type | Tool Material Type | With/without Oil Hole | Coating Y/N | Coating Type |
---|---|---|---|---|---|---|---|---|
2 ~ 20 | 66 ~ 153 | 20 ~ 101 | general steel[○] / Quenched and tempered steel[○] / Cast Iron[◎] | End Mill Shank | Carbide | NA | Available | Other |
From: 1,175,813 VND |
---|
Days to Ship: Số ngày giao hàng: 6 Day(s) or more |
You can add up to 6 items per a category to the compare list.
NACHI(FUJIKOSHI)
180° flat multifunctional carbide drill.[Features]· Reduces hole expansion thanks to its double margins and 2-step cutting edge tip shape.· Capable of producing an accurate counter-bore surface with one shot.· Aqua EX coating improves heat and wear resistance, providing long life.[Applications]· Can support a wide range of applications such as countersinking on inclined surfaces, correction of eccentric bores, burr-free machining of thin plates, etc.
Hole diameter (drill diameter) D(mm) | Overall Length L(mm) | Groove Length L(mm) | work material | Shank Type | Tool Material Type | With/without Oil Hole | Coating Y/N | Coating Type |
---|---|---|---|---|---|---|---|---|
0.5 ~ 20 | 47 ~ 145 | 1.65 ~ 90 | general steel[◎] / Quenched and tempered steel[◎] / high hardness steel[○] / Stainless Steel[○] / Cast Iron[◎] / Aluminum[○] / Copper[○] | End Mill Shank / straight shank | Carbide | NA | Available | Other |
From: 1,210,000 VND |
---|
Days to Ship: Số ngày giao hàng: 4 Day(s) or more |
You can add up to 6 items per a category to the compare list.
PANG PANG Drill Regular Series
YG 1
Hole diameter (drill diameter) D(mm) | Overall Length L(mm) | Groove Length L(mm) | work material | Shank Type | Tool Material Type | With/without Oil Hole | Coating Y/N | Coating Type |
---|---|---|---|---|---|---|---|---|
1 ~ 20 | 38 ~ 131 | 8 ~ 80 | general steel[◎] / Quenched and tempered steel[○] / Stainless Steel[○] / Cast Iron[○] | End Mill Shank | Carbide | NA | Available | TiAlN |
From: 488,865 VND |
---|
Special Price |
Days to Ship: Số ngày giao hàng: Same day or more |
You can add up to 6 items per a category to the compare list.
ATOM
ADS standard straight shank drill long type.
Hole diameter (drill diameter) D(mm) | Overall Length L(mm) | Groove Length L(mm) | work material | Shank Type | Tool Material Type | With/without Oil Hole | Coating Y/N | Coating Type |
---|---|---|---|---|---|---|---|---|
0.3 ~ 13 | 60 ~ 200 | 10 ~ 90 | general steel[○] / Quenched and tempered steel[○] / Stainless Steel[○] / Aluminum[◎] / Resin[◎] | straight shank | Carbide | NA | NA | Non-Coated |
From: 564,388 VND |
---|
Days to Ship: Số ngày giao hàng: 6 Day(s) or more |
You can add up to 6 items per a category to the compare list.
Carbide Flat Drill 2D Type_ADF-2D
OSG
[Features]· Can be used in various applications such as counterboring of inclined and curved surfaces and semi-split hole drilling.· The wear-resistant layer suppresses abrasion and prevents crack propagation due to the periodic nano-layered coating.· The original bottom edge shape reduces the cutting resistance and achieves stable processing.
Hole diameter (drill diameter) D(mm) | Overall Length L(mm) | Groove Length L(mm) | work material | Shank Type | Tool Material Type | With/without Oil Hole | Coating Y/N | Coating Type |
---|---|---|---|---|---|---|---|---|
2 ~ 20 | 50 ~ 140 | 10 ~ 88 | general steel[○] / Quenched and tempered steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○] / Resin[○] | End Mill Shank / straight shank | Carbide | NA | Available | Other |
From: 1,179,999 VND |
---|
Days to Ship: Số ngày giao hàng: Same day or more |
You can add up to 6 items per a category to the compare list.
NSMD-MS MUGEN Micro Coating Micro Drill Short
NS TOOL
[Features]・ Short type with groove length 6 times the cutting diameter.・ By adopting a thin film coating dedicated for micro drill bits, it demonstrates excellent performance for drilling holes in stainless steel, etc.・ Uses thinning on the tip to reduce cutting force. Stable drilling precision. (ø0.02 or more)
Hole diameter (drill diameter) D(mm) | Overall Length L(mm) | Groove Length L(mm) | work material | Shank Type | Tool Material Type | With/without Oil Hole | Coating Y/N | Coating Type |
---|---|---|---|---|---|---|---|---|
0.01 ~ 0.05 | 40 | 0.06 ~ 0.3 | general steel[◎] / Quenched and tempered steel[◎] / Stainless Steel[◎] / Aluminum[○] / Titanium[◎] / Copper[○] / Resin[○] | End Mill Shank | Carbide | NA | Available | TiAlN |
From: 2,384,241 VND |
---|
Days to Ship: Số ngày giao hàng: 9 Day(s) |
You can add up to 6 items per a category to the compare list.
Carbide 2-Flute Leading Drill 90° D922X
7 LEADERS
[Features]· 90° leading drill.· Prevents the chipping of the tip.· Nanoparticle multilayer coating.· Excellent lubricity and abrasion resistance.· Exhibits its strength in general cutting processes.
Hole diameter (drill diameter) D(mm) | Overall Length L(mm) | Groove Length L(mm) | work material | Shank Type | Tool Material Type | With/without Oil Hole | Coating Y/N | Coating Type |
---|---|---|---|---|---|---|---|---|
0.5 ~ 20 | 38 ~ 130 | 1 ~ 40 | general steel[◎] / Quenched and tempered steel[○] / high hardness steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Titanium[○] / Copper[○] / Resin[○] | End Mill Shank | Carbide | - | - | Other |
From: 612,526 VND |
---|
Days to Ship: Số ngày giao hàng: 9 Day(s) or more |
You can add up to 6 items per a category to the compare list.
Carbide Drill with Internal Coolant Supply (3D Type)_ADO-SUS-3D
OSG
[Features]· Has a blade shape designed for sharpness and uses a "MEGA COOLER" oil hole, enabling stable machining and a longer service life, even when used for high efficiency work. 3D type with oil hole
Hole diameter (drill diameter) D(mm) | Overall Length L(mm) | Groove Length L(mm) | work material | Shank Type | Tool Material Type | With/without Oil Hole | Coating Y/N | Coating Type |
---|---|---|---|---|---|---|---|---|
2.8 ~ 20 | 66 ~ 165 | 17 ~ 100 | general steel[○] / Stainless Steel[◎] / Cast Iron[○] / Aluminum[○] / Titanium[◎] / Copper[◎] | End Mill Shank / straight shank | Carbide | Available | Available | Other |
From: 1,878,788 VND |
---|
Days to Ship: Số ngày giao hàng: 6 Day(s) or more |
You can add up to 6 items per a category to the compare list.
ATOM
A high-quality general-purpose drill which can support a wide range of materials, from steel/non-ferrous to resin. Versatile type that allows high performance to be achieved not only in high-speed cutting but also in low-speed cutting.
Hole diameter (drill diameter) D(mm) | Overall Length L(mm) | Groove Length L(mm) | work material | Shank Type | Tool Material Type | With/without Oil Hole | Coating Y/N | Coating Type |
---|---|---|---|---|---|---|---|---|
0.3 ~ 13 | 30 ~ 100 | 4 ~ 50 | general steel[○] / Quenched and tempered steel[○] / Stainless Steel[○] / Aluminum[◎] / Resin[◎] | straight shank | Carbide | NA | NA | Non-Coated |
From: 399,336 VND |
---|
Days to Ship: Số ngày giao hàng: 6 Day(s) or more |
You can add up to 6 items per a category to the compare list.
MISUMI
[Features]·Drilling and counterbore processing can be performed in 1 process for bolt hole processing, realizing highly efficient processing (Counterbore type)·Since relief hole can be drilled at same time as drilling power strip pilot hole, it is ideal for drilling pilot hole in thick plates that require relief (Incision type)
Hole diameter (drill diameter) D(mm) | Overall Length L(mm) | Groove Length L(mm) | work material | Shank Type | Tool Material Type | With/without Oil Hole | Coating Y/N | Coating Type |
---|---|---|---|---|---|---|---|---|
3.4 ~ 10.3 | 73 ~ 136 | 21 ~ 72 | general steel[◎] / Quenched and tempered steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○] | straight shank | Carbide | NA | Available | TiAlN |
From: 1,826,033 VND |
---|
Days to Ship: Số ngày giao hàng: Same day or more |
You can add up to 6 items per a category to the compare list.
Solid Carbide Drills Stub for Byway and Precision Operation_WX-MS-GDS
OSG
Achieves high precision and high performance for drilling ultra-fine diameters for precision equipment or IT components
Hole diameter (drill diameter) D(mm) | Overall Length L(mm) | Groove Length L(mm) | work material | Shank Type | Tool Material Type | With/without Oil Hole | Coating Y/N | Coating Type |
---|---|---|---|---|---|---|---|---|
0.19 ~ 5 | 38 ~ 64 | 1.2 ~ 26 | general steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[◎] / Copper[◎] | End Mill Shank / straight shank | Carbide | NA | Available | Other |
Days to Ship: Số ngày giao hàng: Same day or more |
You can add up to 6 items per a category to the compare list.
Carbide Drill with Internal Coolant Supply (5D Type)_ADO-5D
OSG
[Features]· Carbide 5D type drill with both high blade tip rigidity and good cutting resistance. Recommended for use on a wide range of materials. Uses an EgiAs coating which boasts excellent wear resistance and toughness, helping achieve a longer tool life. Wide flutes for improved chip discharging Wave-shaped flutes that finely fragment the chips
Hole diameter (drill diameter) D(mm) | Overall Length L(mm) | Groove Length L(mm) | work material | Shank Type | Tool Material Type | With/without Oil Hole | Coating Y/N | Coating Type |
---|---|---|---|---|---|---|---|---|
2 ~ 20 | 70 ~ 225 | 18 ~ 160 | general steel[◎] / Quenched and tempered steel[○] / Stainless Steel[○] / Cast Iron[◎] / Aluminum[○] / Titanium[○] / Copper[○] | End Mill Shank | Carbide | Available | Available | Other |
From: 2,322,975 VND |
---|
Days to Ship: Số ngày giao hàng: 6 Day(s) or more |
You can add up to 6 items per a category to the compare list.
Carbide Drill with Internal Coolant Supply (30D Type)_ADO-30D
OSG
[Features]· Carbide 30D type drill with both high blade tip rigidity and good cutting resistance. Recommended for use on a wide range of materials. Uses an EgiAs coating which boasts excellent wear resistance and toughness, helping achieve a longer tool life. Those drills with oil holes use an internal oil supply system, enabling use in a wide range of applications. They also provide higher speed performance and have a longer service life. The use of a middle margin improves stability when machining deep holes
Hole diameter (drill diameter) D(mm) | Overall Length L(mm) | Groove Length L(mm) | work material | Shank Type | Tool Material Type | With/without Oil Hole | Coating Y/N | Coating Type |
---|---|---|---|---|---|---|---|---|
3.5 ~ 10 | 185 ~ 390 | 116 ~ 330 | general steel[◎] / Quenched and tempered steel[○] / Stainless Steel[○] / Cast Iron[◎] | End Mill Shank | Carbide | Available | Available | Other |
From: 5,625,413 VND |
---|
Days to Ship: Số ngày giao hàng: 6 Day(s) or more |
You can add up to 6 items per a category to the compare list.
Solid Carbide Drills for Stainless (Micro Revolution Drill)_MRS-GDL
OSG
Small diameter carbide drill long type for stainless steel machining. Stainless steel processing provides stable durability.
Hole diameter (drill diameter) D(mm) | Overall Length L(mm) | Groove Length L(mm) | work material | Shank Type | Tool Material Type | With/without Oil Hole | Coating Y/N | Coating Type |
---|---|---|---|---|---|---|---|---|
0.44 ~ 3 | 38 ~ 66 | 6 ~ 36 | Stainless Steel[◎] | End Mill Shank / straight shank | Carbide | NA | Available | Other |
From: 527,601 VND |
---|
Days to Ship: Số ngày giao hàng: 6 Day(s) or more |
You can add up to 6 items per a category to the compare list.
GP Carbide Drill (General Processing, 3D Type)
OSG KOREA CORP
Hole diameter (drill diameter) D(mm) | Overall Length L(mm) | Groove Length L(mm) | work material | Shank Type | Tool Material Type | With/without Oil Hole | Coating Y/N | Coating Type |
---|---|---|---|---|---|---|---|---|
- | 53 ~ 131 | 14 ~ 79 | general steel[◎] / Quenched and tempered steel[◎] / high hardness steel[○] / Cast Iron[◎] / Aluminum[○] | straight shank | Carbide | NA | Available | - |
From: 403,782 VND |
---|
Days to Ship: Số ngày giao hàng: 4 Day(s) or more |
You can add up to 6 items per a category to the compare list.
NACHI(FUJIKOSHI)
Carbide universal drill capable of stable high efficiency machining across a wide range of speeds from medium-low to high speed.[Features]· Shape of the new cutting edge greatly improves chip discharge performance.· The cutting resistance is reduced to provide stable machining even on small machines.· A special lubrication function film is provided on the surface layer of the AlCrSi coating.· Longer life by improving lubricity and heat/abrasion resistance.· The unique thinning shape increases biting and reduces cutting resistance.[Applications]· Ideal for thin work materials and small low-rigidity processing machines.
Hole diameter (drill diameter) D(mm) | Overall Length L(mm) | Groove Length L(mm) | work material | Shank Type | Tool Material Type | With/without Oil Hole | Coating Y/N | Coating Type |
---|---|---|---|---|---|---|---|---|
2.1 ~ 16 | 49 ~ 160 | 17 ~ 96 | general steel[◎] / Quenched and tempered steel[◎] / high hardness steel[◎] / Stainless Steel[○] / Cast Iron[○] | End Mill Shank / straight shank | Carbide | NA | Available | Other |
From: 1,880,639 VND |
---|
Days to Ship: Số ngày giao hàng: 6 Day(s) or more |
You can add up to 6 items per a category to the compare list.
NACHI(FUJIKOSHI)
Carbide universal drill capable of stable high efficiency machining across a wide range of speeds from medium-low to high speed.[Features]· Shape of the new cutting edge greatly improves chip discharge performance.· The cutting resistance is reduced to provide stable machining even on small machines.· A special lubrication function film is provided on the surface layer of the AlCrSi coating to improve the lubricity, heat resistance and abrasion resistance, thereby prolonging the service life.[Applications]· The unique thinning shape increases biting and reduces cutting resistance.· Stable cutting performance even with thin work materials and small low-rigidity processing machines.
Hole diameter (drill diameter) D(mm) | Overall Length L(mm) | Groove Length L(mm) | work material | Shank Type | Tool Material Type | With/without Oil Hole | Coating Y/N | Coating Type |
---|---|---|---|---|---|---|---|---|
2 ~ 16 | 45 ~ 112 | 8 ~ 55 | general steel[◎] / Quenched and tempered steel[◎] / high hardness steel[◎] / Stainless Steel[○] / Cast Iron[○] | End Mill Shank / straight shank | Carbide | - | Available | Other |
From: 1,025,000 VND |
---|
Days to Ship: Số ngày giao hàng: 6 Day(s) or more |
You can add up to 6 items per a category to the compare list.
Sweep Cut Drill Reamer Type 3 mm Shank
ATOM
Sweep Cut Drills drastically reduce the burrs produced with through-holes. [Features] · Suppresses hole bending. · Suppresses runout of the drill bit when biting in, realizing high hole position and hole diameter accuracy.
Hole diameter (drill diameter) D(mm) | Overall Length L(mm) | Groove Length L(mm) | work material | Shank Type | Tool Material Type | With/without Oil Hole | Coating Y/N | Coating Type |
---|---|---|---|---|---|---|---|---|
0.1 ~ 3 | 38 ~ 50 | 1.2 ~ 25 | Aluminum[◎] / Resin[◎] | End Mill Shank | Carbide | NA | NA | Non-Coated |
From: 1,349,299 VND |
---|
Days to Ship: Số ngày giao hàng: 6 Day(s) or more |
You can add up to 6 items per a category to the compare list.
Micro Drill "NEO PRO" Semi-Long Blades
ATOM
A series that achieves stable long life developed for thin hole machining on steel. A coated drill supporting a wide range of materials from mild steel to high hardness steel (HRC 50).
Hole diameter (drill diameter) D(mm) | Overall Length L(mm) | Groove Length L(mm) | work material | Shank Type | Tool Material Type | With/without Oil Hole | Coating Y/N | Coating Type |
---|---|---|---|---|---|---|---|---|
0.04 ~ 0.99 | 38 | 0.6 ~ 11 | general steel[◎] / Quenched and tempered steel[◎] / high hardness steel[○] / Stainless Steel[○] / Aluminum[○] / Resin[○] | End Mill Shank | Carbide | NA | Available | For General Steels (AlCrN, etc.) |
From: 854,549 VND |
---|
Days to Ship: Số ngày giao hàng: 6 Day(s) or more |
You can add up to 6 items per a category to the compare list.
Aqua Drill EX Starting AQDEXST
NACHI(FUJIKOSHI)
[Features]· Highly accurate positioning is possible with good bite.· A multi-function type capable of centering, chamfering and V-grooving.
Hole diameter (drill diameter) D(mm) | Overall Length L(mm) | Groove Length L(mm) | work material | Shank Type | Tool Material Type | With/without Oil Hole | Coating Y/N | Coating Type |
---|---|---|---|---|---|---|---|---|
3 ~ 20 | 48 ~ 131 | 9 ~ 40 | general steel[○] / Quenched and tempered steel[○] / high hardness steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○] | straight shank | Carbide | NA | Available | For General Steels (AlCrN, etc.) |
From: 1,418,252 VND |
---|
Days to Ship: Số ngày giao hàng: 6 Day(s) or more |
You can add up to 6 items per a category to the compare list.
OSG
[Features]· Carbide 2D type drill with both high blade tip rigidity and good cutting resistance. Recommended for use on a wide range of materials. Uses an EgiAs coating which boasts excellent wear resistance and toughness, helping achieve a longer tool life. Wide flutes for improved chip discharging Wave-shaped flutes that finely fragment the chips
Hole diameter (drill diameter) D(mm) | Overall Length L(mm) | Groove Length L(mm) | work material | Shank Type | Tool Material Type | With/without Oil Hole | Coating Y/N | Coating Type |
---|---|---|---|---|---|---|---|---|
2 ~ 12 | 62 ~ 102 | 14 ~ 55 | general steel[○] / Quenched and tempered steel[○] / Cast Iron[◎] | End Mill Shank | Carbide | NA | Available | Other |
From: 1,000,069 VND |
---|
Days to Ship: Số ngày giao hàng: 6 Day(s) or more |
You can add up to 6 items per a category to the compare list.
NS TOOL
[Features]· MUGEN flat drill bit makes drilling holes in inclined or curved surfaces easy.・ The thinning shape developed according to the size (spiral thinning (ø1 to ø2.9)/triple thinning (ø3 to ø6)), double margin (ø2.6 or more), and long neck shape ensure stable and accurate drilling operations.· MFD has a flat bottom flute that flattens out the bottoms of blind holes and is ideal for counterbore machining and thread cutting (thread milling) pilot holes.· Through-holes can be drilled without the generation of burrs.· It adopts a reliable MUGEN coating to support a range of work material from mild steel to stainless steel.· It reduces drilling process time and improve machining efficiency with this 1 tool.・ Stable drilling is possible regardless of the shape of the machined surface such as slopes and curved surfaces.・ High efficiency counter boring is possible.・ Back burr can be suppressed.
Hole diameter (drill diameter) D(mm) | Overall Length L(mm) | Groove Length L(mm) | work material | Shank Type | Tool Material Type | With/without Oil Hole | Coating Y/N | Coating Type |
---|---|---|---|---|---|---|---|---|
1 ~ 1.9 | 55 | 2 ~ 11.8 | general steel[◎] / Quenched and tempered steel[○] / Stainless Steel[◎] / Aluminum[◎] / Titanium[○] / Copper[◎] / Resin[○] | End Mill Shank | Carbide | NA | Available | TiAlN |
From: 997,254 VND |
---|
Days to Ship: Số ngày giao hàng: 9 Day(s) |
You can add up to 6 items per a category to the compare list.
NACHI(FUJIKOSHI)
A drill that is difficult to break and stable for machining.[Features]· Employs cemented carbide ideal for small diameter hole drilling.· A drill with high rigidity is used.· The cutting load has been reduced by circumferential clearance and thinning.[Applications]· Hard to break and capable of stable processing thanks to the high-rigidity shape and the use of carbide alloy ideal for small diameter drilling work.
Hole diameter (drill diameter) D(mm) | Overall Length L(mm) | Groove Length L(mm) | work material | Shank Type | Tool Material Type | With/without Oil Hole | Coating Y/N | Coating Type |
---|---|---|---|---|---|---|---|---|
0.2 ~ 1.99 | 38 ~ 47 | 2.5 ~ 15 | general steel[◎] / Quenched and tempered steel[◎] / high hardness steel[◎] / Stainless Steel[◎] / Cast Iron[○] / Titanium[○] | End Mill Shank | Carbide | NA | Available | Other |
From: 544,333 VND |
---|
Days to Ship: Số ngày giao hàng: 6 Day(s) or more |
You can add up to 6 items per a category to the compare list.
Solid Carbide Drills for Non-Ferrous Metal_NF-GDN
OSG
It realizes high-speed drilling of aluminum castings, aluminum die-casts, and wrought aluminum materials that are frequently used in automobiles with high cost-effectiveness.
Hole diameter (drill diameter) D(mm) | Overall Length L(mm) | Groove Length L(mm) | work material | Shank Type | Tool Material Type | With/without Oil Hole | Coating Y/N | Coating Type |
---|---|---|---|---|---|---|---|---|
3 ~ 13 | 59 ~ 128 | 25 ~ 76 | Cast Iron[◎] / Aluminum[◎] / Copper[○] | End Mill Shank / straight shank | Carbide | NA | NA | Non-Coated |
From: 605,000 VND |
---|
Days to Ship: Số ngày giao hàng: 6 Day(s) or more |
You can add up to 6 items per a category to the compare list.
C-UMD, Micro Coat, 2-Flute UNIMAX Drill Bit
UNION TOOL
[Features]·UT microcoating.·Tip angle 150·Tool Material: Carbide
Hole diameter (drill diameter) D(mm) | Overall Length L(mm) | Groove Length L(mm) | work material | Shank Type | Tool Material Type | With/without Oil Hole | Coating Y/N | Coating Type |
---|---|---|---|---|---|---|---|---|
0.11 ~ 3 | 38 | 1.2 ~ 12 | general steel[○] / Quenched and tempered steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[◎] / Titanium[○] / Copper[○] | End Mill Shank | Carbide | NA | Available | Other |
From: 521,503 VND |
---|
Days to Ship: Số ngày giao hàng: 6 Day(s) or more |
You can add up to 6 items per a category to the compare list.
ATOM
A high-quality general-purpose drill which can support a wide range of materials, from steel/non-ferrous to resin. Versatile type that allows high performance to be achieved not only in high-speed cutting but also in low-speed cutting.
Hole diameter (drill diameter) D(mm) | Overall Length L(mm) | Groove Length L(mm) | work material | Shank Type | Tool Material Type | With/without Oil Hole | Coating Y/N | Coating Type |
---|---|---|---|---|---|---|---|---|
0.3 ~ 13 | 40 ~ 149 | 8 ~ 70 | general steel[○] / Quenched and tempered steel[○] / Stainless Steel[○] / Aluminum[◎] / Resin[◎] | straight shank | Carbide | NA | NA | Non-Coated |
From: 419,012 VND |
---|
Days to Ship: Số ngày giao hàng: 6 Day(s) or more |
You can add up to 6 items per a category to the compare list.
Micro Drill Standard Tip Length
ATOM
A drill for precision multiporous machining. (Min. diameter φ0.02), Can be used for a wide range of applications including general steel, non-ferrous metals, and resins.
Hole diameter (drill diameter) D(mm) | Overall Length L(mm) | Groove Length L(mm) | work material | Shank Type | Tool Material Type | With/without Oil Hole | Coating Y/N | Coating Type |
---|---|---|---|---|---|---|---|---|
0.02 ~ 3 | 38 ~ 50 | 0.2 ~ 25 | general steel[○] / Quenched and tempered steel[○] / Stainless Steel[○] / Aluminum[◎] / Resin[◎] | End Mill Shank | Carbide | NA | NA | Non-Coated |
From: 608,256 VND |
---|
Days to Ship: Số ngày giao hàng: 6 Day(s) or more |
You can add up to 6 items per a category to the compare list.
Aqua Drill EX Flat Regular AQDEXZR
NACHI(FUJIKOSHI)
180° flat multifunctional carbide drill.[Features]· Reduces hole expansion thanks to its double margins and 2-step cutting edge tip shape.· Capable of producing an accurate counter-bore surface with one shot.· Aqua EX coating improves heat and wear resistance, providing long life.· Flat drill for 4D boring depth with excellent drilling performance.· A centering hole or guide hole is required.[Applications]· Countersinking on inclined surfaces and correction of eccentric bores.· Multifunctional drill that can be used for a wide range of applications, such as thin plate burrless processing, etc.
Hole diameter (drill diameter) D(mm) | Overall Length L(mm) | Groove Length L(mm) | work material | Shank Type | Tool Material Type | With/without Oil Hole | Coating Y/N | Coating Type |
---|---|---|---|---|---|---|---|---|
3 ~ 20 | 60 ~ 195 | 19 ~ 126 | general steel[◎] / Quenched and tempered steel[◎] / high hardness steel[○] / Stainless Steel[○] / Cast Iron[◎] / Aluminum[○] / Copper[○] | - | Carbide | - | Available | Other |
From: 1,686,673 VND |
---|
Days to Ship: Số ngày giao hàng: 6 Day(s) or more |
You can add up to 6 items per a category to the compare list.
YG 1
Hole diameter (drill diameter) D(mm) | Overall Length L(mm) | Groove Length L(mm) | work material | Shank Type | Tool Material Type | With/without Oil Hole | Coating Y/N | Coating Type |
---|---|---|---|---|---|---|---|---|
- | - | - | general steel[◎] / Quenched and tempered steel[○] / high hardness steel[○] / Stainless Steel[○] / Cast Iron[○] | End Mill Shank | Carbide | NA | Available | TiAlN |
From: 719,192 VND |
---|
Days to Ship: Số ngày giao hàng: 4 Day(s) or more |
You can add up to 6 items per a category to the compare list.
Carbide Drill with Internal Coolant Supply (3D Type)_ADO-3D
OSG
[Features]· Carbide 3D type drill with both high blade tip rigidity and good cutting resistance. Recommended for use on a wide range of materials. Uses an EgiAs coating which boasts excellent wear resistance and toughness, helping achieve a longer tool life. Wide flutes for improved chip discharging Wave-shaped flutes that finely fragment the chips
Hole diameter (drill diameter) D(mm) | Overall Length L(mm) | Groove Length L(mm) | work material | Shank Type | Tool Material Type | With/without Oil Hole | Coating Y/N | Coating Type |
---|---|---|---|---|---|---|---|---|
2 ~ 20 | 66 ~ 165 | 12 ~ 100 | general steel[◎] / Quenched and tempered steel[○] / Stainless Steel[○] / Cast Iron[◎] / Aluminum[○] / Titanium[○] / Copper[○] | End Mill Shank | Carbide | Available | Available | Other |
From: 1,567,470 VND |
---|
Days to Ship: Số ngày giao hàng: 6 Day(s) or more |
You can add up to 6 items per a category to the compare list.
Solid Carbide Drills (Diamond Coated)_D-GDN
OSG
This drill bit not only cuts aluminum alloys well, but also high silicone aluminum alloys, which cause extremely short lifespans in carbide drill bits.
Hole diameter (drill diameter) D(mm) | Overall Length L(mm) | Groove Length L(mm) | work material | Shank Type | Tool Material Type | With/without Oil Hole | Coating Y/N | Coating Type |
---|---|---|---|---|---|---|---|---|
2 ~ 12 | 54 ~ 126 | 18 ~ 76 | Aluminum[◎] / Copper[○] | End Mill Shank / straight shank | Carbide | NA | Available | Dia Coat |
From: 2,852,237 VND |
---|
Days to Ship: Số ngày giao hàng: 6 Day(s) or more |
You can add up to 6 items per a category to the compare list.
EX-HARD Drills for removing Taps_EX-H-DRL
OSG
Used for damaged tap removal and missing drill holes in hardened steel (58 to 68 HRC) and stellite, etc.
Hole diameter (drill diameter) D(mm) | Overall Length L(mm) | Groove Length L(mm) | work material | Shank Type | Tool Material Type | With/without Oil Hole | Coating Y/N | Coating Type |
---|---|---|---|---|---|---|---|---|
2 ~ 12 | 30 ~ 110 | 10 ~ 60 | high hardness steel[◎] | End Mill Shank / straight shank | Carbide | NA | NA | Non-Coated |
From: 881,666 VND |
---|
Days to Ship: Số ngày giao hàng: Same day or more |
You can add up to 6 items per a category to the compare list.
Standard Solid Drill with Coating
ATOM
ADS standard type with a TiAlN coating achieves a long life and consistent machining. It is also possible to drill hardened steel of up to 50 HRC, for which machining was difficult with standard non-coated products.
Hole diameter (drill diameter) D(mm) | Overall Length L(mm) | Groove Length L(mm) | work material | Shank Type | Tool Material Type | With/without Oil Hole | Coating Y/N | Coating Type |
---|---|---|---|---|---|---|---|---|
0.3 ~ 6 | 30 ~ 80 | 4 ~ 40 | general steel[◎] / Quenched and tempered steel[◎] / high hardness steel[◎] / Stainless Steel[○] / Cast Iron[○] / Aluminum[◎] / Resin[◎] | straight shank | Carbide | NA | Available | TiAlN |
From: 468,586 VND |
---|
Days to Ship: Số ngày giao hàng: 6 Day(s) or more |
You can add up to 6 items per a category to the compare list.
Micro Drill "NEO PRO" Standard Blade Length
ATOM
A new series that achieves stable long life machining developed for thin hole machining on steel. A coated drill supporting a wide range of materials from mild steel to high hardness steel (HRC 50).
Hole diameter (drill diameter) D(mm) | Overall Length L(mm) | Groove Length L(mm) | work material | Shank Type | Tool Material Type | With/without Oil Hole | Coating Y/N | Coating Type |
---|---|---|---|---|---|---|---|---|
0.03 ~ 3 | 38 ~ 50 | 0.3 ~ 25 | general steel[◎] / Quenched and tempered steel[◎] / high hardness steel[○] / Stainless Steel[○] / Aluminum[○] / Resin[○] | End Mill Shank | Carbide | NA | Available | For General Steels (AlCrN, etc.) |
From: 719,796 VND |
---|
Days to Ship: Số ngày giao hàng: 6 Day(s) or more |
You can add up to 6 items per a category to the compare list.
End Mill Shank Type 3 x D RT100U 5514
GUHRING
[Features]· Supports a wide range of machining and enables high-efficiency, high-speed machining.
Hole diameter (drill diameter) D(mm) | Overall Length L(mm) | Groove Length L(mm) | work material | Shank Type | Tool Material Type | With/without Oil Hole | Coating Y/N | Coating Type |
---|---|---|---|---|---|---|---|---|
3 ~ 20 | 62 ~ 131 | 20 ~ 79 | general steel[◎] / Quenched and tempered steel[○] / high hardness steel[○] / Stainless Steel[○] / Cast Iron[◎] / Aluminum[◎] / Titanium[○] / Copper[◎] | End Mill Shank | Carbide | NA | Available | Other |
From: 1,631,592 VND |
---|
Days to Ship: Số ngày giao hàng: 6 Day(s) or more |
You can add up to 6 items per a category to the compare list.
Aqua Drill EX with Flat Corner R AQDEXZ-R
NACHI(FUJIKOSHI)
[Features]· Drill with excellent drilling performance for counterboring.· Ideal for inclined surfaces and tap pilot hole drilling.· Recommended for hole depth 2D (twice the diameter) or less.
Hole diameter (drill diameter) D(mm) | Overall Length L(mm) | Groove Length L(mm) | work material | Shank Type | Tool Material Type | With/without Oil Hole | Coating Y/N | Coating Type |
---|---|---|---|---|---|---|---|---|
3 ~ 12 | 50 ~ 90 | 14 ~ 54 | general steel[○] / Quenched and tempered steel[○] / high hardness steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○] | straight shank | Carbide | NA | Available | For General Steels (AlCrN, etc.) |
From: 1,659,272 VND |
---|
Days to Ship: Số ngày giao hàng: 7 Day(s) or more |
You can add up to 6 items per a category to the compare list.
TiAlN Coated Carbide Drill, Regular
MISUMI
[Features]·Designed with small core diameter to improve cutting chip discharge·The combination of superfine cemented carbide alloy and TiAlN coating provides excellent abrasion resistance and enables high-speed machining·Can be regrinded. Please refer to the page dedicated to "regrinding service" for usage procedures, range of services, prices, delivery times, etc.
Hole diameter (drill diameter) D(mm) | Overall Length L(mm) | Groove Length L(mm) | work material | Shank Type | Tool Material Type | With/without Oil Hole | Coating Y/N | Coating Type |
---|---|---|---|---|---|---|---|---|
0.3 ~ 13 | 38 ~ 124 | 3 ~ 77 | general steel[◎] / Quenched and tempered steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[◎] / Copper[◎] | End Mill Shank | Carbide | NA | Available | TiAlN |
From: 553,836 VND |
---|
Days to Ship: Số ngày giao hàng: Same day or more |
You can add up to 6 items per a category to the compare list.
Aqua Drill EX Oil Hole 8D AQDEXOH8D
NACHI(FUJIKOSHI)
Aqua Drill EX series solid carbide drills with internal coolant.[Features]· Product lineup is for 3D, 5D and 8D boring depths.· Aqua Drill EX based new flute shape adopted to achieve excellent chipping breakup.· Aqua EX coating achieves stable long life.[Applications]· Stable processing of mild steel to high hardness materials.
Hole diameter (drill diameter) D(mm) | Overall Length L(mm) | Groove Length L(mm) | work material | Shank Type | Tool Material Type | With/without Oil Hole | Coating Y/N | Coating Type |
---|---|---|---|---|---|---|---|---|
3 ~ 16 | 81 ~ 242 | 33 ~ 176 | general steel[◎] / Quenched and tempered steel[◎] / high hardness steel[◎] / Stainless Steel[◎] / Cast Iron[◎] / Titanium[○] | End Mill Shank / straight shank | Carbide | Available | Available | Other |
From: 3,347,773 VND |
---|
Days to Ship: Số ngày giao hàng: 6 Day(s) or more |
You can add up to 6 items per a category to the compare list.
ATOM
ADS standard straight shank drill extra-long type.
Hole diameter (drill diameter) D(mm) | Overall Length L(mm) | Groove Length L(mm) | work material | Shank Type | Tool Material Type | With/without Oil Hole | Coating Y/N | Coating Type |
---|---|---|---|---|---|---|---|---|
0.3 ~ 13 | 75 ~ 250 | 15 ~ 120 | general steel[○] / Quenched and tempered steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[◎] / Resin[◎] | straight shank | Carbide | NA | NA | Non-Coated |
From: 623,207 VND |
---|
Days to Ship: Số ngày giao hàng: 6 Day(s) or more |
You can add up to 6 items per a category to the compare list.
ATOM
Small diameter, deep hole machining drill. (Min. diameter φ0.03), Can be used for a wide range of applications including general steel, non-ferrous metals, and resins.
Hole diameter (drill diameter) D(mm) | Overall Length L(mm) | Groove Length L(mm) | work material | Shank Type | Tool Material Type | With/without Oil Hole | Coating Y/N | Coating Type |
---|---|---|---|---|---|---|---|---|
0.03 ~ 3 | 38 ~ 65 | 0.6 ~ 40 | general steel[○] / Quenched and tempered steel[○] / Stainless Steel[○] / Aluminum[◎] / Resin[◎] | End Mill Shank | Carbide | NA | NA | Non-Coated |
From: 827,795 VND |
---|
Days to Ship: Số ngày giao hàng: 6 Day(s) or more |
You can add up to 6 items per a category to the compare list.
End Mill Shank Drill 12 × D, with Oil Hole, RT 100 Double Margin 5525
GUHRING
The use of a double margin provides excellent straightness and enables highly accurate deep drilling. Internal lubrication enables high performance drilling without steps.
Hole diameter (drill diameter) D(mm) | Overall Length L(mm) | Groove Length L(mm) | work material | Shank Type | Tool Material Type | With/without Oil Hole | Coating Y/N | Coating Type |
---|---|---|---|---|---|---|---|---|
3 ~ 20 | 90 ~ 310 | 50 ~ 258 | - | End Mill Shank | Carbide | Available | Available | Other |
From: 4,710,843 VND |
---|
Days to Ship: Số ngày giao hàng: 8 Day(s) or more |
You can add up to 6 items per a category to the compare list.
YG 1
Hole diameter (drill diameter) D(mm) | Overall Length L(mm) | Groove Length L(mm) | work material | Shank Type | Tool Material Type | With/without Oil Hole | Coating Y/N | Coating Type |
---|---|---|---|---|---|---|---|---|
1 ~ 10.5 | 32 ~ 115 | 10 ~ 60 | Cast Iron[○] / Copper[○] | - | Carbide | NA | Available | TiAlN |
From: 288,155 VND |
---|
Days to Ship: Số ngày giao hàng: Same day or more |
BrandNhãn hiệu |
---|
Product SeriesDòng sản phẩm |
From |
Days to ShipSố ngày giao hàng |
Hole diameter (drill diameter) D(mm) |
Overall Length L(mm) |
Groove Length L(mm) |
work material |
Shank Type |
Tool Material Type |
With/without Oil Hole |
Coating Y/N |
Coating Type |
You can add up to 6 items per a category to the compare list. | You can add up to 6 items per a category to the compare list. | You can add up to 6 items per a category to the compare list. | You can add up to 6 items per a category to the compare list. | You can add up to 6 items per a category to the compare list. | You can add up to 6 items per a category to the compare list. | You can add up to 6 items per a category to the compare list. | You can add up to 6 items per a category to the compare list. | You can add up to 6 items per a category to the compare list. | You can add up to 6 items per a category to the compare list. | You can add up to 6 items per a category to the compare list. | You can add up to 6 items per a category to the compare list. | You can add up to 6 items per a category to the compare list. | You can add up to 6 items per a category to the compare list. | You can add up to 6 items per a category to the compare list. | You can add up to 6 items per a category to the compare list. | You can add up to 6 items per a category to the compare list. | You can add up to 6 items per a category to the compare list. | You can add up to 6 items per a category to the compare list. | You can add up to 6 items per a category to the compare list. | You can add up to 6 items per a category to the compare list. | You can add up to 6 items per a category to the compare list. | You can add up to 6 items per a category to the compare list. | You can add up to 6 items per a category to the compare list. | You can add up to 6 items per a category to the compare list. | You can add up to 6 items per a category to the compare list. | You can add up to 6 items per a category to the compare list. | You can add up to 6 items per a category to the compare list. | You can add up to 6 items per a category to the compare list. | You can add up to 6 items per a category to the compare list. | You can add up to 6 items per a category to the compare list. | You can add up to 6 items per a category to the compare list. | You can add up to 6 items per a category to the compare list. | You can add up to 6 items per a category to the compare list. | You can add up to 6 items per a category to the compare list. | You can add up to 6 items per a category to the compare list. | You can add up to 6 items per a category to the compare list. | You can add up to 6 items per a category to the compare list. | You can add up to 6 items per a category to the compare list. | You can add up to 6 items per a category to the compare list. | You can add up to 6 items per a category to the compare list. | You can add up to 6 items per a category to the compare list. | You can add up to 6 items per a category to the compare list. | You can add up to 6 items per a category to the compare list. | You can add up to 6 items per a category to the compare list. | |
BrandNhãn hiệu | NACHI(FUJIKOSHI) | NACHI(FUJIKOSHI) | NACHI(FUJIKOSHI) | OSG | NACHI(FUJIKOSHI) | YG 1 | ATOM | OSG | NS TOOL | 7 LEADERS | OSG | ATOM | MISUMI | OSG | OSG | OSG | OSG | OSG KOREA CORP | NACHI(FUJIKOSHI) | NACHI(FUJIKOSHI) | ATOM | ATOM | NACHI(FUJIKOSHI) | OSG | NS TOOL | NACHI(FUJIKOSHI) | OSG | UNION TOOL | ATOM | ATOM | NACHI(FUJIKOSHI) | YG 1 | OSG | OSG | OSG | ATOM | ATOM | GUHRING | NACHI(FUJIKOSHI) | MISUMI | NACHI(FUJIKOSHI) | ATOM | ATOM | GUHRING | YG 1 |
Product SeriesDòng sản phẩm | Carbide Drill with Internal Coolant Supply (3D Type)_ADO-SUS-3D | Solid Carbide Drills Stub for Byway and Precision Operation_WX-MS-GDS | Carbide Drill with Internal Coolant Supply (30D Type)_ADO-30D | Solid Carbide Drills for Stainless (Micro Revolution Drill)_MRS-GDL | End Mill Shank Drill 12 × D, with Oil Hole, RT 100 Double Margin 5525 | ||||||||||||||||||||||||||||||||||||||||
From | 686,931 VND | 1,668,182 VND | 629,109 VND | 1,175,813 VND | 1,210,000 VND | 488,865 VND Special Price On Sale Till 31/03/2025 | 564,388 VND | 1,179,999 VND | 2,384,241 VND | 612,526 VND | 1,878,788 VND | 399,336 VND | 1,826,033 VND | 2,322,975 VND | 5,625,413 VND | 527,601 VND | 403,782 VND | 1,880,639 VND | 1,025,000 VND | 1,349,299 VND | 854,549 VND | 1,418,252 VND | 1,000,069 VND | 997,254 VND | 544,333 VND | 605,000 VND | 521,503 VND | 419,012 VND | 608,256 VND | 1,686,673 VND | 719,192 VND | 1,567,470 VND | 2,852,237 VND | 881,666 VND | 468,586 VND | 719,796 VND | 1,631,592 VND | 1,659,272 VND | 553,836 VND | 3,347,773 VND | 623,207 VND | 827,795 VND | 4,710,843 VND | 288,155 VND | |
Days to ShipSố ngày giao hàng | 6 Day(s) or more | 6 Day(s) or more | 4 Day(s) or more | 6 Day(s) or more | 4 Day(s) or more | Same day or more | 6 Day(s) or more | Same day or more | 9 Day(s) | 9 Day(s) or more | 6 Day(s) or more | 6 Day(s) or more | Same day or more | Same day or more | 6 Day(s) or more | 6 Day(s) or more | 6 Day(s) or more | 4 Day(s) or more | 6 Day(s) or more | 6 Day(s) or more | 6 Day(s) or more | 6 Day(s) or more | 6 Day(s) or more | 6 Day(s) or more | 9 Day(s) | 6 Day(s) or more | 6 Day(s) or more | 6 Day(s) or more | 6 Day(s) or more | 6 Day(s) or more | 6 Day(s) or more | 4 Day(s) or more | 6 Day(s) or more | 6 Day(s) or more | Same day or more | 6 Day(s) or more | 6 Day(s) or more | 6 Day(s) or more | 7 Day(s) or more | Same day or more | 6 Day(s) or more | 6 Day(s) or more | 6 Day(s) or more | 8 Day(s) or more | Same day or more |
Hole diameter (drill diameter) D(mm) | 3 ~ 16 | 3 ~ 12 | 2 ~ 12 | 2 ~ 20 | 0.5 ~ 20 | 1 ~ 20 | 0.3 ~ 13 | 2 ~ 20 | 0.01 ~ 0.05 | 0.5 ~ 20 | 2.8 ~ 20 | 0.3 ~ 13 | 3.4 ~ 10.3 | 0.19 ~ 5 | 2 ~ 20 | 3.5 ~ 10 | 0.44 ~ 3 | - | 2.1 ~ 16 | 2 ~ 16 | 0.1 ~ 3 | 0.04 ~ 0.99 | 3 ~ 20 | 2 ~ 12 | 1 ~ 1.9 | 0.2 ~ 1.99 | 3 ~ 13 | 0.11 ~ 3 | 0.3 ~ 13 | 0.02 ~ 3 | 3 ~ 20 | - | 2 ~ 20 | 2 ~ 12 | 2 ~ 12 | 0.3 ~ 6 | 0.03 ~ 3 | 3 ~ 20 | 3 ~ 12 | 0.3 ~ 13 | 3 ~ 16 | 0.3 ~ 13 | 0.03 ~ 3 | 3 ~ 20 | 1 ~ 10.5 |
Overall Length L(mm) | 48 ~ 144 | 48 ~ 108 | 44 ~ 108 | 66 ~ 153 | 47 ~ 145 | 38 ~ 131 | 60 ~ 200 | 50 ~ 140 | 40 | 38 ~ 130 | 66 ~ 165 | 30 ~ 100 | 73 ~ 136 | 38 ~ 64 | 70 ~ 225 | 185 ~ 390 | 38 ~ 66 | 53 ~ 131 | 49 ~ 160 | 45 ~ 112 | 38 ~ 50 | 38 | 48 ~ 131 | 62 ~ 102 | 55 | 38 ~ 47 | 59 ~ 128 | 38 | 40 ~ 149 | 38 ~ 50 | 60 ~ 195 | - | 66 ~ 165 | 54 ~ 126 | 30 ~ 110 | 30 ~ 80 | 38 ~ 50 | 62 ~ 131 | 50 ~ 90 | 38 ~ 124 | 81 ~ 242 | 75 ~ 250 | 38 ~ 65 | 90 ~ 310 | 32 ~ 115 |
Groove Length L(mm) | 16 ~ 80 | 16 ~ 51 | 12 ~ 51 | 20 ~ 101 | 1.65 ~ 90 | 8 ~ 80 | 10 ~ 90 | 10 ~ 88 | 0.06 ~ 0.3 | 1 ~ 40 | 17 ~ 100 | 4 ~ 50 | 21 ~ 72 | 1.2 ~ 26 | 18 ~ 160 | 116 ~ 330 | 6 ~ 36 | 14 ~ 79 | 17 ~ 96 | 8 ~ 55 | 1.2 ~ 25 | 0.6 ~ 11 | 9 ~ 40 | 14 ~ 55 | 2 ~ 11.8 | 2.5 ~ 15 | 25 ~ 76 | 1.2 ~ 12 | 8 ~ 70 | 0.2 ~ 25 | 19 ~ 126 | - | 12 ~ 100 | 18 ~ 76 | 10 ~ 60 | 4 ~ 40 | 0.3 ~ 25 | 20 ~ 79 | 14 ~ 54 | 3 ~ 77 | 33 ~ 176 | 15 ~ 120 | 0.6 ~ 40 | 50 ~ 258 | 10 ~ 60 |
work material | general steel[○] / Quenched and tempered steel[◎] / high hardness steel[◎] / Cast Iron[○] | general steel[◎] / Cast Iron[○] | high hardness steel[◎] | general steel[○] / Quenched and tempered steel[○] / Cast Iron[◎] | general steel[◎] / Quenched and tempered steel[◎] / high hardness steel[○] / Stainless Steel[○] / Cast Iron[◎] / Aluminum[○] / Copper[○] | general steel[◎] / Quenched and tempered steel[○] / Stainless Steel[○] / Cast Iron[○] | general steel[○] / Quenched and tempered steel[○] / Stainless Steel[○] / Aluminum[◎] / Resin[◎] | general steel[○] / Quenched and tempered steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○] / Resin[○] | general steel[◎] / Quenched and tempered steel[◎] / Stainless Steel[◎] / Aluminum[○] / Titanium[◎] / Copper[○] / Resin[○] | general steel[◎] / Quenched and tempered steel[○] / high hardness steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Titanium[○] / Copper[○] / Resin[○] | general steel[○] / Stainless Steel[◎] / Cast Iron[○] / Aluminum[○] / Titanium[◎] / Copper[◎] | general steel[○] / Quenched and tempered steel[○] / Stainless Steel[○] / Aluminum[◎] / Resin[◎] | general steel[◎] / Quenched and tempered steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○] | general steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[◎] / Copper[◎] | general steel[◎] / Quenched and tempered steel[○] / Stainless Steel[○] / Cast Iron[◎] / Aluminum[○] / Titanium[○] / Copper[○] | general steel[◎] / Quenched and tempered steel[○] / Stainless Steel[○] / Cast Iron[◎] | Stainless Steel[◎] | general steel[◎] / Quenched and tempered steel[◎] / high hardness steel[○] / Cast Iron[◎] / Aluminum[○] | general steel[◎] / Quenched and tempered steel[◎] / high hardness steel[◎] / Stainless Steel[○] / Cast Iron[○] | general steel[◎] / Quenched and tempered steel[◎] / high hardness steel[◎] / Stainless Steel[○] / Cast Iron[○] | Aluminum[◎] / Resin[◎] | general steel[◎] / Quenched and tempered steel[◎] / high hardness steel[○] / Stainless Steel[○] / Aluminum[○] / Resin[○] | general steel[○] / Quenched and tempered steel[○] / high hardness steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○] | general steel[○] / Quenched and tempered steel[○] / Cast Iron[◎] | general steel[◎] / Quenched and tempered steel[○] / Stainless Steel[◎] / Aluminum[◎] / Titanium[○] / Copper[◎] / Resin[○] | general steel[◎] / Quenched and tempered steel[◎] / high hardness steel[◎] / Stainless Steel[◎] / Cast Iron[○] / Titanium[○] | Cast Iron[◎] / Aluminum[◎] / Copper[○] | general steel[○] / Quenched and tempered steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[◎] / Titanium[○] / Copper[○] | general steel[○] / Quenched and tempered steel[○] / Stainless Steel[○] / Aluminum[◎] / Resin[◎] | general steel[○] / Quenched and tempered steel[○] / Stainless Steel[○] / Aluminum[◎] / Resin[◎] | general steel[◎] / Quenched and tempered steel[◎] / high hardness steel[○] / Stainless Steel[○] / Cast Iron[◎] / Aluminum[○] / Copper[○] | general steel[◎] / Quenched and tempered steel[○] / high hardness steel[○] / Stainless Steel[○] / Cast Iron[○] | general steel[◎] / Quenched and tempered steel[○] / Stainless Steel[○] / Cast Iron[◎] / Aluminum[○] / Titanium[○] / Copper[○] | Aluminum[◎] / Copper[○] | high hardness steel[◎] | general steel[◎] / Quenched and tempered steel[◎] / high hardness steel[◎] / Stainless Steel[○] / Cast Iron[○] / Aluminum[◎] / Resin[◎] | general steel[◎] / Quenched and tempered steel[◎] / high hardness steel[○] / Stainless Steel[○] / Aluminum[○] / Resin[○] | general steel[◎] / Quenched and tempered steel[○] / high hardness steel[○] / Stainless Steel[○] / Cast Iron[◎] / Aluminum[◎] / Titanium[○] / Copper[◎] | general steel[○] / Quenched and tempered steel[○] / high hardness steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○] | general steel[◎] / Quenched and tempered steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[◎] / Copper[◎] | general steel[◎] / Quenched and tempered steel[◎] / high hardness steel[◎] / Stainless Steel[◎] / Cast Iron[◎] / Titanium[○] | general steel[○] / Quenched and tempered steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[◎] / Resin[◎] | general steel[○] / Quenched and tempered steel[○] / Stainless Steel[○] / Aluminum[◎] / Resin[◎] | - | Cast Iron[○] / Copper[○] |
Shank Type | End Mill Shank / straight shank | End Mill Shank / straight shank | End Mill Shank / straight shank | End Mill Shank | End Mill Shank / straight shank | End Mill Shank | straight shank | End Mill Shank / straight shank | End Mill Shank | End Mill Shank | End Mill Shank / straight shank | straight shank | straight shank | End Mill Shank / straight shank | End Mill Shank | End Mill Shank | End Mill Shank / straight shank | straight shank | End Mill Shank / straight shank | End Mill Shank / straight shank | End Mill Shank | End Mill Shank | straight shank | End Mill Shank | End Mill Shank | End Mill Shank | End Mill Shank / straight shank | End Mill Shank | straight shank | End Mill Shank | - | End Mill Shank | End Mill Shank | End Mill Shank / straight shank | End Mill Shank / straight shank | straight shank | End Mill Shank | End Mill Shank | straight shank | End Mill Shank | End Mill Shank / straight shank | straight shank | End Mill Shank | End Mill Shank | - |
Tool Material Type | Carbide | Carbide | Carbide | Carbide | Carbide | Carbide | Carbide | Carbide | Carbide | Carbide | Carbide | Carbide | Carbide | Carbide | Carbide | Carbide | Carbide | Carbide | Carbide | Carbide | Carbide | Carbide | Carbide | Carbide | Carbide | Carbide | Carbide | Carbide | Carbide | Carbide | Carbide | Carbide | Carbide | Carbide | Carbide | Carbide | Carbide | Carbide | Carbide | Carbide | Carbide | Carbide | Carbide | Carbide | Carbide |
With/without Oil Hole | NA | NA | NA | NA | NA | NA | NA | NA | NA | - | Available | NA | NA | NA | Available | Available | NA | NA | NA | - | NA | NA | NA | NA | NA | NA | NA | NA | NA | NA | - | NA | Available | NA | NA | NA | NA | NA | NA | NA | Available | NA | NA | Available | NA |
Coating Y/N | Available | Available | Available | Available | Available | Available | NA | Available | Available | - | Available | NA | Available | Available | Available | Available | Available | Available | Available | Available | NA | Available | Available | Available | Available | Available | NA | Available | NA | NA | Available | Available | Available | Available | NA | Available | Available | Available | Available | Available | Available | NA | NA | Available | Available |
Coating Type | Other | Other | Other | Other | Other | TiAlN | Non-Coated | Other | TiAlN | Other | Other | Non-Coated | TiAlN | Other | Other | Other | Other | - | Other | Other | Non-Coated | For General Steels (AlCrN, etc.) | For General Steels (AlCrN, etc.) | Other | TiAlN | Other | Non-Coated | Other | Non-Coated | Non-Coated | Other | TiAlN | Other | Dia Coat | Non-Coated | TiAlN | For General Steels (AlCrN, etc.) | Other | For General Steels (AlCrN, etc.) | TiAlN | Other | Non-Coated | Non-Coated | Other | TiAlN |
Loading...Tải…
How can we improve?
How can we improve?
While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
Customer Privacy Policy
Thank you for your cooperation.
While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
Please use the inquiry form.
Customer Privacy Policy