Holding Tools for O.D. Tuning（Applicable Tip Shape：C (80° Diamond-Shape)）

• You can add up to 6 items per a category to the compare list. Compare

  

  Sandvik, T-Max P, Cutting Unit, Turning, PCLNR/L

  SANDVIK

  Coromant Capto is a unique coupling with a unique polygonal shapeThe quick change of the lathe greatly contributes to the improvement of the user's productivity.

  Applicable Tip Shape	Applicable Chip Clearance Angle	Selfishly	Application	Clamp Shape	Shank height(mm)	Shank width(mm)
  C (80° Diamond-Shape)	Negative	Right-hand / Left-hand	Outer Diameter / End Face / Chamfer	Pin Lock	-	-

  From: 7,315,865 VND
  Days to Ship: Số ngày giao hàng: 7 Day(s) or more

  7 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  SEC-D Type Tool Bit DCLN Type (Cutting Direction: Right)

  SUMITOMO ELECTRIC HARDMETAL

  Double clamp type. For general / end face cutting[Features]・ A stable clamp improves insert fracture resistance.・ High index precision improves machining precision.・ Insert replacement work is possible from the bottom side of the tool bit.・ Ideal for high efficiency, intermittent, and high hardness material machining.

  Applicable Tip Shape	Applicable Chip Clearance Angle	Selfishly	Application	Clamp Shape	Shank height(mm)	Shank width(mm)
  C (80° Diamond-Shape)	Negative	Right-hand	Outer Diameter / End Face	Cable clamp	20 ～ 25	20 ～ 25

  From: 1,944,769 VND
  Days to Ship: Số ngày giao hàng: 8 Day(s) or more

  8 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  ACLC-FF Type (without Offset) (Outer Diameter Machining / End Machining)

  KYOCERA

  [Specifications]·Machining applications: outer diameter and flange; compatible insert shape: C (80° two-bolt); compatible insert relief angle: positive 7; clamp method: non-ISO standard

  Applicable Tip Shape	Applicable Chip Clearance Angle	Selfishly	Application	Clamp Shape	Shank height(mm)	Shank width(mm)
  C (80° Diamond-Shape)	Pozidriv	Right-hand / Left-hand	Outer Diameter / End Face	Back Surface Clamp	-	-

  From: 1,990,408 VND
  Days to Ship: Số ngày giao hàng: 9 Day(s) or more

  9 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  SEC-MINI Tool Holder (Back Clamp) PCLC Type

  SUMITOMO ELECTRIC HARDMETAL

  [Specifications]·Machining applications: flange; compatible insert shape: C (80° two-bolt); compatible insert relief angle: positive 7° (C); clamp method: pin lock (P)

  Applicable Tip Shape	Applicable Chip Clearance Angle	Selfishly	Application	Clamp Shape	Shank height(mm)	Shank width(mm)
  C (80° Diamond-Shape)	Pozidriv	Left-hand	Outer Diameter / End Face	Lever lock / Back Surface Clamp	8 ～ 20	10 ～ 20

  From: 1,983,326 VND
  Days to Ship: Số ngày giao hàng: 6 Day(s) or more

  6 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  DCLN Type (Outer Diameter Machining / End Machining)

  KYOCERA

  [Specifications]·Machining applications: outer diameter and flange; compatible insert shape: C (80° two-bolt); compatible insert relief angle: negative 0° (N); clamp method: double clamp (D)

  Applicable Tip Shape	Applicable Chip Clearance Angle	Selfishly	Application	Clamp Shape	Shank height(mm)	Shank width(mm)
  C (80° Diamond-Shape)	Negative	Right-hand / Left-hand	Outer Diameter / End Face	Cable clamp	20 ～ 25	20 ～ 25

  From: 2,008,113 VND
  Days to Ship: Số ngày giao hàng: 6 Day(s) or more

  6 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Tool Bit for SEC-Solid Sumi Boron FCLN

  SUMITOMO ELECTRIC HARDMETAL

  [Specifications]·Machining applications: outer diameter and flange; compatible insert shape: C (80° two-bolt); compatible insert relief angle: negative 0° (N); clamp method: clamp-on (C)

  Applicable Tip Shape	Applicable Chip Clearance Angle	Selfishly	Application	Clamp Shape	Shank height(mm)	Shank width(mm)
  C (80° Diamond-Shape)	-	Right-hand / Left-hand	Outer Diameter / End Face	Clamp-on	25	25

  From: 3,777,015 VND
  Days to Ship: Số ngày giao hàng: 6 Day(s) or more

  6 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  SEC-MINI Tool Holder (Back Clamp) PCLC Type (Cutting Direction: Right)

  SUMITOMO ELECTRIC HARDMETAL

  [Specifications]·Machining applications: flange; compatible insert shape: C (80° two-bolt); compatible insert relief angle: positive 7° (C); clamp method: pin lock (P)

  Applicable Tip Shape	Applicable Chip Clearance Angle	Selfishly	Application	Clamp Shape	Shank height(mm)	Shank width(mm)
  C (80° Diamond-Shape)	Pozidriv	Right-hand	Outer Diameter / End Face	Lever lock	8 ～ 20	10 ～ 20

  From: 1,983,326 VND
  Days to Ship: Số ngày giao hàng: 6 Day(s) or more

  6 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  SEC-MINI Tool Holder Zero Offset Holder SCLC-X Type (Cutting Direction: Left)

  SUMITOMO ELECTRIC HARDMETAL

  [Specifications]·Machining applications: flange; compatible insert shape: C (80° two-bolt); compatible insert relief angle: positive 7° (C); clamp method: screw-on (S)

  Applicable Tip Shape	Applicable Chip Clearance Angle	Selfishly	Application	Clamp Shape	Shank height(mm)	Shank width(mm)
  C (80° Diamond-Shape)	Pozidriv	Left-hand	Outer Diameter / End Face	Screw-on	10 ～ 12	10 ～ 15

  From: 1,739,394 VND
  Days to Ship: Số ngày giao hàng: 6 Day(s) or more

  6 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  PCLN Type (External Diameter/End-Face Machining)

  KYOCERA

  [Specifications]·Machining applications: outer diameter and flange; compatible insert shape: C (80° two-bolt); relief angle: negative 0° (N); clamp method: pin lock (P), non-ISO standard

  Applicable Tip Shape	Applicable Chip Clearance Angle	Selfishly	Application	Clamp Shape	Shank height(mm)	Shank width(mm)
  C (80° Diamond-Shape)	Negative	Right-hand / Left-hand	Outer Diameter / End Face	Lever lock	16 ～ 32	16 ～ 32

  From: 1,803,918 VND
  Days to Ship: Số ngày giao hàng: 6 Day(s) or more

  6 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  SCLC Type (External Diameter/End-Face Machining)

  KYOCERA

  [Specifications]·Machining applications: outer diameter and flange; compatible insert shape: C (80° two-bolt); compatible insert relief angle: positive 7° (C); clamp method: screw-on (S)

  Applicable Tip Shape	Applicable Chip Clearance Angle	Selfishly	Application	Clamp Shape	Shank height(mm)	Shank width(mm)
  C (80° Diamond-Shape)	Pozidriv	Right-hand / Left-hand	Outer Diameter / End Face	Screw-on	10 ～ 25	10 ～ 25

  From: 1,701,821 VND
  Days to Ship: Số ngày giao hàng: 6 Day(s) or more

  6 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  S...SCLC Type (External Diameter/End-Face Machining)

  KYOCERA

  [Specifications]·Machining applications: outer diameter and flange; compatible insert shape: C (80° two-bolt); compatible insert relief angle: positive 7° (C); clamp method: screw-on (S)

  Applicable Tip Shape	Applicable Chip Clearance Angle	Selfishly	Application	Clamp Shape	Shank height(mm)	Shank width(mm)
  C (80° Diamond-Shape)	Pozidriv	Left-hand	Outer Diameter / End Face	Screw-on	11 ～ 23	11 ～ 23

  From: 4,825,924 VND
  Days to Ship: Số ngày giao hàng: 9 Day(s) or more

  9 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Shank Tool Bit, CoroTurn RC Double Clamp For Ceramic Inserts, DCLNR/L -2

  SANDVIK

  Highly productive external turning of large to medium-sized partsstable and secure clamping

  Applicable Tip Shape	Applicable Chip Clearance Angle	Selfishly	Application	Clamp Shape	Shank height(mm)	Shank width(mm)
  C (80° Diamond-Shape)	Negative	Right-hand / Left-hand	Outer Diameter	Cable clamp	25 ～ 32	25

  From: 5,519,688 VND
  Days to Ship: Số ngày giao hàng: 7 Day(s) or more

  7 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Sandvik, T-Max P, Cutting Unit, Turning, C-PCLNR/L-HP

  SANDVIK

  Excellent chip control and process stability for best part qualityAccurate high-precision coolant supply controls chip control and provides stable machining

  Applicable Tip Shape	Applicable Chip Clearance Angle	Selfishly	Application	Clamp Shape	Shank height(mm)	Shank width(mm)
  C (80° Diamond-Shape)	Negative	Right-hand / Left-hand	Outer Diameter / End Face / Chamfer	Pin Lock	-	-

  From: 14,107,208 VND
  Days to Ship: Số ngày giao hàng: 7 Day(s) or more

  7 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  SEC-Outer Diameter Bit, PCLN Type

  SUMITOMO ELECTRIC HARDMETAL

  [Specifications]·Machining applications: flange; compatible insert shape: C (80° two-bolt); compatible insert relief angle: negative 0° (N); clamp method: pin lock (P)

  Applicable Tip Shape	Applicable Chip Clearance Angle	Selfishly	Application	Clamp Shape	Shank height(mm)	Shank width(mm)
  C (80° Diamond-Shape)	Negative	Right-hand / Left-hand	Outer Diameter / End Face	Lever lock	40	40

  From: 3,310,593 VND
  Days to Ship: Số ngày giao hàng: 6 Day(s) or more

  6 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  SEC-Mini Bit, SC Type

  SUMITOMO ELECTRIC HARDMETAL

  [Specifications]·Compatible insert shape: C (80° two-bolt); compatible insert relief angle: positive 7° (C); clamp method: screw-on (S)

  Applicable Tip Shape	Applicable Chip Clearance Angle	Selfishly	Application	Clamp Shape	Shank height(mm)	Shank width(mm)
  C (80° Diamond-Shape)	Pozidriv	Right-hand / Left-hand	Outer Diameter / End Face	-	8 ～ 20	8 ～ 20

  From: 1,739,394 VND
  Days to Ship: Số ngày giao hàng: 6 Day(s) or more

  6 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  SEC-D type tool DCLN type

  SUMITOMO ELECTRIC HARDMETAL

  [Specifications]·Machining applications: flange; compatible insert shape: C (80° two-bolt); compatible insert relief angle: negative 0° (N); clamp method: double clamp (D)

  Applicable Tip Shape	Applicable Chip Clearance Angle	Selfishly	Application	Clamp Shape	Shank height(mm)	Shank width(mm)
  C (80° Diamond-Shape)	Negative	Left-hand	Outer Diameter / End Face	Cable clamp	20 ～ 25	20 ～ 25

  From: 1,944,769 VND
  Days to Ship: Số ngày giao hàng: 6 Day(s) or more

  6 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  SEC-70 Type Tool Bit, PCBN Type

  SUMITOMO ELECTRIC HARDMETAL

  Sumitomo Electric Industries Hardmetal, outer diameter turning holder SEC-70 type tool bit PCBN type.

  Applicable Tip Shape	Applicable Chip Clearance Angle	Selfishly	Application	Clamp Shape	Shank height(mm)	Shank width(mm)
  C (80° Diamond-Shape)	Negative	Right-hand / Left-hand	Outer Diameter	Lever lock	20 ～ 25	20 ～ 25

  From: 1,851,721 VND
  Days to Ship: Số ngày giao hàng: 6 Day(s) or more

  6 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  SEC-70 Type Tool Bit, PCFN Type

  SUMITOMO ELECTRIC HARDMETAL

  Sumitomo Electric Industries Hardmetal, outer diameter turning holder SEC-70 type tool bit PCFN type.

  Applicable Tip Shape	Applicable Chip Clearance Angle	Selfishly	Application	Clamp Shape	Shank height(mm)	Shank width(mm)
  C (80° Diamond-Shape)	Negative	Right-hand / Left-hand	End Face	Lever lock	20 ～ 25	20 ～ 25

  From: 1,851,721 VND
  Days to Ship: Số ngày giao hàng: 6 Day(s) or more

  6 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  SEC-70 Type Tool Bit PCLN Type (Cutting Direction: Left)

  SUMITOMO ELECTRIC HARDMETAL

  Lever lock type. For general / end face cutting[Features]・ A stable clamp improves insert fracture resistance.・ High index precision improves machining precision.・ Insert replacement work is possible from the bottom side of the tool bit.・ Ideal for high efficiency, intermittent, and high hardness material machining.

  Applicable Tip Shape	Applicable Chip Clearance Angle	Selfishly	Application	Clamp Shape	Shank height(mm)	Shank width(mm)
  C (80° Diamond-Shape)	Negative	Left-hand	Outer Diameter / End Face	Lever lock	16 ～ 32	16 ～ 32

  From: 1,771,263 VND
  Days to Ship: Số ngày giao hàng: 6 Day(s) or more

  6 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  SEC-70 Type Tool Bit PCLN Type (Cutting Direction: Right)

  SUMITOMO ELECTRIC HARDMETAL

  Lever lock type. For general / end face cutting[Features]・ A stable clamp improves insert fracture resistance.・ High index precision improves machining precision.・ Insert replacement work is possible from the bottom side of the tool bit.・ Ideal for high efficiency, intermittent, and high hardness material machining.

  Applicable Tip Shape	Applicable Chip Clearance Angle	Selfishly	Application	Clamp Shape	Shank height(mm)	Shank width(mm)
  C (80° Diamond-Shape)	Negative	Right-hand	Outer Diameter / End Face	Lever lock	16 ～ 32	16 ～ 32

  From: 1,771,263 VND
  Days to Ship: Số ngày giao hàng: 6 Day(s) or more

  6 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  SEC-SC Type Tool Bit SCLC Type (Cutting Direction: Left)

  SUMITOMO ELECTRIC HARDMETAL

  Screw-on type. General / end face cutting[Features]・ A stable clamp improves insert fracture resistance.・ High index precision improves machining precision.・ Insert replacement work is possible from the bottom side of the tool bit.・ Ideal for high efficiency, intermittent, and high hardness material machining.

  Applicable Tip Shape	Applicable Chip Clearance Angle	Selfishly	Application	Clamp Shape	Shank height(mm)	Shank width(mm)
  C (80° Diamond-Shape)	Pozidriv	Left-hand	Outer Diameter / End Face	Screw-on	8 ～ 25	8 ～ 25

  From: 1,739,394 VND
  Days to Ship: Số ngày giao hàng: 6 Day(s) or more

  6 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  SEC-SC Type Tool Bit SCLC Type (Cutting Direction: Right)

  SUMITOMO ELECTRIC HARDMETAL

  Screw-on type. General / end face cutting[Features]・ A stable clamp improves insert fracture resistance.・ High index precision improves machining precision.・ Insert replacement work is possible from the bottom side of the tool bit.・ Ideal for high efficiency, intermittent, and high hardness material machining.

  Applicable Tip Shape	Applicable Chip Clearance Angle	Selfishly	Application	Clamp Shape	Shank height(mm)	Shank width(mm)
  C (80° Diamond-Shape)	Pozidriv	Right-hand	Outer Diameter / End Face	Screw-on	8 ～ 25	8 ～ 25

  From: 1,739,394 VND
  Days to Ship: Số ngày giao hàng: 6 Day(s) or more

  6 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  SEC-Mini Tool Bit, SCAC-X Type

  SUMITOMO ELECTRIC HARDMETAL

  Sumitomo Electric Industries Hardmetal, outer diameter turning holder SEC-Mini tool bit SCAC-X type.

  Applicable Tip Shape	Applicable Chip Clearance Angle	Selfishly	Application	Clamp Shape	Shank height(mm)	Shank width(mm)
  C (80° Diamond-Shape)	Pozidriv	Right-hand / Left-hand	Outer Diameter	Screw-on	10 ～ 12	10 ～ 15

  From: 1,739,394 VND
  Days to Ship: Số ngày giao hàng: 6 Day(s) or more

  6 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  SEC-MINI Tool Holder Zero Offset Holder SCLC-X Type (Cutting Direction: Right)

  SUMITOMO ELECTRIC HARDMETAL

  [Specifications]·Machining applications: flange; compatible insert shape: C (80° two-bolt); compatible insert relief angle: positive 7° (C); clamp method: screw-on (S)

  Applicable Tip Shape	Applicable Chip Clearance Angle	Selfishly	Application	Clamp Shape	Shank height(mm)	Shank width(mm)
  C (80° Diamond-Shape)	Pozidriv	Right-hand	Outer Diameter / End Face	Screw-on	10 ～ 12	10 ～ 15

  From: 1,739,394 VND
  Days to Ship: Số ngày giao hàng: 6 Day(s) or more

  6 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  SEC-Mini Bit (back face clamp), Offset 0 Holder, PCLC-X Type

  SUMITOMO ELECTRIC HARDMETAL

  [Specifications]·Machining applications: flange; compatible insert shape: C (80° two-bolt); compatible insert relief angle: positive 7° (C); clamp method: pin lock (P)

  Applicable Tip Shape	Applicable Chip Clearance Angle	Selfishly	Application	Clamp Shape	Shank height(mm)	Shank width(mm)
  C (80° Diamond-Shape)	Pozidriv	Right-hand	Outer Diameter / End Face	Lever lock	10 ～ 16	10 ～ 16

  From: 1,983,326 VND
  Days to Ship: Số ngày giao hàng: 6 Day(s) or more

  6 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  CCLN Type (Outer Diameter Machining / End Machining)

  KYOCERA

  [Specifications]·Machining applications: outer diameter and flange; compatible insert shape: C (80° two-bolt); compatible insert relief angle: negative 0° (N); clamp method: clamp-on (C)

  Applicable Tip Shape	Applicable Chip Clearance Angle	Selfishly	Application	Clamp Shape	Shank height(mm)	Shank width(mm)
  C (80° Diamond-Shape)	Negative	Right-hand / Left-hand	Outer Diameter / End Face	Clamp-on	-	-

  From: 2,031,129 VND
  Days to Ship: Số ngày giao hàng: 6 Day(s) or more

  6 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  CCRN-A Type (Outer Diameter Machining)

  KYOCERA

  Holder for clamp-on type solid CBN tools.

  Applicable Tip Shape	Applicable Chip Clearance Angle	Selfishly	Application	Clamp Shape	Shank height(mm)	Shank width(mm)
  C (80° Diamond-Shape)	Negative	Right-hand / Left-hand	Outer Diameter	Clamp-on	-	-

  From: 3,746,327 VND
  Days to Ship: Số ngày giao hàng: 9 Day(s) or more

  9 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  CCLN-A Type (Outer Diameter Machining / End Machining)

  KYOCERA

  Holder for clamp-on type solid CBN tools.

  Applicable Tip Shape	Applicable Chip Clearance Angle	Selfishly	Application	Clamp Shape	Shank height(mm)	Shank width(mm)
  C (80° Diamond-Shape)	Negative	Right-hand / Left-hand	Outer Diameter / End Face	Clamp-on	-	-

  From: 3,746,327 VND
  Days to Ship: Số ngày giao hàng: 9 Day(s) or more

  9 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  SCLC-FF Type (without Offset) (External Diameter / End Face Machining)

  KYOCERA

  [Features]·This is SCLC-FF type[Applications]·For small tools, general turning holders, machining of outer diameter and flange

  Applicable Tip Shape	Applicable Chip Clearance Angle	Selfishly	Application	Clamp Shape	Shank height(mm)	Shank width(mm)
  C (80° Diamond-Shape)	Pozidriv	Right-hand / Left-hand	Outer Diameter / End Face	Screw-on	8 ～ 18	8 ～ 16

  From: 1,701,821 VND
  Days to Ship: Số ngày giao hàng: 8 Day(s) or more

  8 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  SCLN Type (without Offset) (External Diameter / End Face Machining)

  KYOCERA

  [Specifications]·Machining applications: outer diameter and flange; compatible insert shape: C (80° two-bolt); compatible insert relief angle: negative 0° (N); clamp method: screw-on (S)

  Applicable Tip Shape	Applicable Chip Clearance Angle	Selfishly	Application	Clamp Shape	Shank height(mm)	Shank width(mm)
  C (80° Diamond-Shape)	Negative	Right-hand	Outer Diameter / End Face	Screw-on	-	-

  From: 1,663,657 VND
  Days to Ship: Số ngày giao hàng: 8 Day(s) or more

  8 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  PCLN-FF Type (without Offset) (External Diameter / End Face Machining)

  KYOCERA

  [Specifications]·Machining applications: outer diameter and flange; compatible insert shape: C (80° two-bolt); compatible insert relief angle: negative 0° (N); clamp method: pin lock (P)

  Applicable Tip Shape	Applicable Chip Clearance Angle	Selfishly	Application	Clamp Shape	Shank height(mm)	Shank width(mm)
  C (80° Diamond-Shape)	Negative	Right-hand	Outer Diameter / End Face	Lever lock	-	-

  From: 1,813,754 VND
  Days to Ship: Số ngày giao hàng: 9 Day(s) or more

  9 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  CORO-TURN RC, Shank Bit for Negative Tips

  SANDVIK

  Unique shape exhibits high performance

  Applicable Tip Shape	Applicable Chip Clearance Angle	Selfishly	Application	Clamp Shape	Shank height(mm)	Shank width(mm)
  C (80° Diamond-Shape)	Negative	Right-hand / Left-hand	Outer Diameter / End Face / Chamfer	Cable clamp	20 ～ 32	20 ～ 32

  From: 3,405,139 VND
  Days to Ship: Số ngày giao hàng: 8 Day(s) or more

  8 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Shank Tool Bit T-Max P Lever Clamp PCLNR/L

  SANDVIK

  [Features]The number-one recommended turning tool for rough outer-diameter cutting and finishing. For use with negative inserts, and, as it features a center hole, it allows for speedy and accurate indexing. Supports outer-diameter turning (bore-cutting) and the use of negative inserts. Supports everything from roughing through to finishing.

  Applicable Tip Shape	Applicable Chip Clearance Angle	Selfishly	Application	Clamp Shape	Shank height(mm)	Shank width(mm)
  C (80° Diamond-Shape)	Negative	Right-hand	Outer Diameter / End Face / Profiling / Chamfer	Lever lock	20	20

  From: 3,447,280 VND
  Days to Ship: Số ngày giao hàng: 7 Day(s) or more

  7 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Coromant Capto, Cutting Head, CoroTurn, Ceramic Inserts, CCRNR/L-12-4

  SANDVIK

  Coromant Capto is a unique coupling with a unique polygonal shapeThe quick change of the lathe greatly contributes to the improvement of the user's productivity.

  Applicable Tip Shape	Applicable Chip Clearance Angle	Selfishly	Application	Clamp Shape	Shank height(mm)	Shank width(mm)
  C (80° Diamond-Shape)	-	Right-hand / Left-hand	Outer Diameter	Clamp-on	-	-

  From: 9,772,263 VND
  Days to Ship: Số ngày giao hàng: 7 Day(s) or more

  7 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  T-Max P Cutting Unit For Turning, C-PCLNR/L-12HP

  SANDVIK

  T-Max P series cutting unit for highly productive external turning of large to medium-sized parts

  Applicable Tip Shape	Applicable Chip Clearance Angle	Selfishly	Application	Clamp Shape	Shank height(mm)	Shank width(mm)
  C (80° Diamond-Shape)	-	Right-hand / Left-hand	Outer Diameter / End Face / Chamfer	-	-	-

  From: 22,638,820 VND
  Days to Ship: Số ngày giao hàng: 9 Day(s) or more

  9 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  CoroTurn HP Coromant Capto, Cutting Head For Inner Diameter Turning, C-PCLNR/L.-HP

  SANDVIK

  Sandvik External holder CoroTurn HP Coromant Capto Cutting head for internal turning C-PCLNR/L-HP

  Applicable Tip Shape	Applicable Chip Clearance Angle	Selfishly	Application	Clamp Shape	Shank height(mm)	Shank width(mm)
  C (80° Diamond-Shape)	-	Right-hand / Left-hand	Outer Diameter / End Face / Chamfer	Lever lock	-	-

  From: 12,668,141 VND
  Days to Ship: Số ngày giao hàng: 7 Day(s) or more

  7 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  CoroPlex TT Multi-Function Turning Tool, C-TB-CN

  SANDVIK

  Equipped with 2 turning inserts in the same tool, greatly reducing tool change timeSpace-saving tool pot in tool magazine

  Applicable Tip Shape	Applicable Chip Clearance Angle	Selfishly	Application	Clamp Shape	Shank height(mm)	Shank width(mm)
  C (80° Diamond-Shape)	-	No-hand	Outer Diameter / End Face / Profiling / Chamfer	-	0	-

  From: 39,085,298 VND
  Days to Ship: Số ngày giao hàng: 9 Day(s) or more

  9 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Coromant Capto, Cutting Head, CoroTurn 107 Screw Clamp, C-S-CN/BL

  SANDVIK

  For internal and external turning of slender partsHighly repeatable insert exchange improves productivity and achieves high quality

  Applicable Tip Shape	Applicable Chip Clearance Angle	Selfishly	Application	Clamp Shape	Shank height(mm)	Shank width(mm)
  C (80° Diamond-Shape)	-	No-hand	Outer Diameter / End Face / Chamfer	Clamp-on	-	-

  From: 13,931,828 VND
  Days to Ship: Số ngày giao hàng: 9 Day(s) or more

  9 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Coromant Capto, Cutting Head, CoroTurn Ceramic Inserts, CCLNR/L-4

  SANDVIK

  Coromant Capto is a unique coupling with a unique polygonal shapeThe quick change of the lathe greatly contributes to the improvement of the user's productivity.

  Applicable Tip Shape	Applicable Chip Clearance Angle	Selfishly	Application	Clamp Shape	Shank height(mm)	Shank width(mm)
  C (80° Diamond-Shape)	-	Right-hand / Left-hand	Outer Diameter / End Face / Chamfer	Clamp-on	-	-

  From: 9,772,263 VND
  Days to Ship: Số ngày giao hàng: 7 Day(s) or more

  7 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Coromant Capto, Cutting Head, CoroTurn, Ceramic Inserts, DCLNR/L-12-2

  SANDVIK

  Coromant Capto is a unique coupling with a unique polygonal shapeThe quick change of the lathe greatly contributes to the improvement of the user's productivity.

  Applicable Tip Shape	Applicable Chip Clearance Angle	Selfishly	Application	Clamp Shape	Shank height(mm)	Shank width(mm)
  C (80° Diamond-Shape)	-	Right-hand / Left-hand	Outer Diameter / End Face / Chamfer	Cable clamp	-	-

  From: 9,772,263 VND
  Days to Ship: Số ngày giao hàng: 7 Day(s) or more

  7 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Coromant Capto, Cutting Unit, Multi-Function Tool CoroPlex, TB C-TB-CN12CN12

  SANDVIK

  Tool that combines external turning and internal turning boring with two inserts in the same toolGood chip control and long tool life

  Applicable Tip Shape	Applicable Chip Clearance Angle	Selfishly	Application	Clamp Shape	Shank height(mm)	Shank width(mm)
  C (80° Diamond-Shape)	-	No-hand	Outer Diameter / End Face / Profiling / Chamfer / Post-Grinding	-	-	-

  From: 28,909,040 VND
  Days to Ship: Số ngày giao hàng: 7 Day(s) or more

  7 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Coromant Capto, CoroTurn, Cutting Head, B-Axis 45° Tool, C-PCMNN-12HP

  SANDVIK

  Coromant Capto is a unique coupling with a unique polygonal shapeThe quick change of the lathe greatly contributes to the improvement of the user's productivity.

  Applicable Tip Shape	Applicable Chip Clearance Angle	Selfishly	Application	Clamp Shape	Shank height(mm)	Shank width(mm)
  C (80° Diamond-Shape)	-	No-hand	Outer Diameter / End Face / Chamfer	-	-	-

  From: 16,745,498 VND
  Days to Ship: Số ngày giao hàng: 9 Day(s) or more

  9 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Coromant Capto, CoroTurn, Cutting Head, High Pressure Coolant Specification, C8-PCMNN-12HP

  SANDVIK

  Coromant Capto is a unique coupling with a unique polygonal shapeThe quick change of the lathe greatly contributes to the improvement of the user's productivity.

  Applicable Tip Shape	Applicable Chip Clearance Angle	Selfishly	Application	Clamp Shape	Shank height(mm)	Shank width(mm)
  C (80° Diamond-Shape)	-	No-hand	Outer Diameter / End Face / Chamfer	Lever lock	-	-

  From: 24,557,575 VND
  Days to Ship: Số ngày giao hàng: 9 Day(s) or more

  9 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Outer Diameter Turning, Shank Tool Bit, CoroTurn 107 Screw Clamp, SCACR/L-S

  SANDVIK

  For internal and external turning of slender partsHighly repeatable insert exchange improves productivity and achieves high quality

  Applicable Tip Shape	Applicable Chip Clearance Angle	Selfishly	Application	Clamp Shape	Shank height(mm)	Shank width(mm)
  C (80° Diamond-Shape)	Pozidriv	Right-hand / Left-hand	Outer Diameter / Chamfer	Clamp-on	8	8

  From: 3,339,521 VND
  Days to Ship: Số ngày giao hàng: 7 Day(s) or more

  7 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Outer Diameter Turning, Shank Tool Bit, CoroTurn 107 Screw Clamp, SCLCR/L-S

  SANDVIK

  For internal and external turning of slender partsHighly repeatable insert exchange improves productivity and achieves high quality

  Applicable Tip Shape	Applicable Chip Clearance Angle	Selfishly	Application	Clamp Shape	Shank height(mm)	Shank width(mm)
  C (80° Diamond-Shape)	Pozidriv	Right-hand / Left-hand	Outer Diameter / End Face / Chamfer	Clamp-on	8	8

  From: 3,339,521 VND
  Days to Ship: Số ngày giao hàng: 7 Day(s) or more

  7 Day(s) or more

BrandNhãn hiệu
Product SeriesDòng sản phẩm
From
Days to ShipSố ngày giao hàng
Applicable Tip Shape
Applicable Chip Clearance Angle
Selfishly
Application
Clamp Shape
Shank height(mm)
Shank width(mm)

	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare
BrandNhãn hiệu	SANDVIK	SUMITOMO ELECTRIC HARDMETAL	KYOCERA	SUMITOMO ELECTRIC HARDMETAL	KYOCERA	SUMITOMO ELECTRIC HARDMETAL	SUMITOMO ELECTRIC HARDMETAL	SUMITOMO ELECTRIC HARDMETAL	KYOCERA	KYOCERA	KYOCERA	SANDVIK	SANDVIK	SUMITOMO ELECTRIC HARDMETAL	SUMITOMO ELECTRIC HARDMETAL	SUMITOMO ELECTRIC HARDMETAL	SUMITOMO ELECTRIC HARDMETAL	SUMITOMO ELECTRIC HARDMETAL	SUMITOMO ELECTRIC HARDMETAL	SUMITOMO ELECTRIC HARDMETAL	SUMITOMO ELECTRIC HARDMETAL	SUMITOMO ELECTRIC HARDMETAL	SUMITOMO ELECTRIC HARDMETAL	SUMITOMO ELECTRIC HARDMETAL	SUMITOMO ELECTRIC HARDMETAL	KYOCERA	KYOCERA	KYOCERA	KYOCERA	KYOCERA	KYOCERA	SANDVIK	SANDVIK	SANDVIK	SANDVIK	SANDVIK	SANDVIK	SANDVIK	SANDVIK	SANDVIK	SANDVIK	SANDVIK	SANDVIK	SANDVIK	SANDVIK
Product SeriesDòng sản phẩm	Sandvik, T-Max P, Cutting Unit, Turning, PCLNR/L	SEC-D Type Tool Bit DCLN Type (Cutting Direction: Right)	ACLC-FF Type (without Offset) (Outer Diameter Machining / End Machining)	SEC-MINI Tool Holder (Back Clamp) PCLC Type	DCLN Type (Outer Diameter Machining / End Machining)	Tool Bit for SEC-Solid Sumi Boron FCLN	SEC-MINI Tool Holder (Back Clamp) PCLC Type (Cutting Direction: Right)	SEC-MINI Tool Holder Zero Offset Holder SCLC-X Type (Cutting Direction: Left)	PCLN Type (External Diameter/End-Face Machining)	SCLC Type (External Diameter/End-Face Machining)	S...SCLC Type (External Diameter/End-Face Machining)	Shank Tool Bit, CoroTurn RC Double Clamp For Ceramic Inserts, DCLNR/L -2	Sandvik, T-Max P, Cutting Unit, Turning, C-PCLNR/L-HP	SEC-Outer Diameter Bit, PCLN Type	SEC-Mini Bit, SC Type	SEC-D type tool DCLN type	SEC-70 Type Tool Bit, PCBN Type	SEC-70 Type Tool Bit, PCFN Type	SEC-70 Type Tool Bit PCLN Type (Cutting Direction: Left)	SEC-70 Type Tool Bit PCLN Type (Cutting Direction: Right)	SEC-SC Type Tool Bit SCLC Type (Cutting Direction: Left)	SEC-SC Type Tool Bit SCLC Type (Cutting Direction: Right)	SEC-Mini Tool Bit, SCAC-X Type	SEC-MINI Tool Holder Zero Offset Holder SCLC-X Type (Cutting Direction: Right)	SEC-Mini Bit (back face clamp), Offset 0 Holder, PCLC-X Type	CCLN Type (Outer Diameter Machining / End Machining)	CCRN-A Type (Outer Diameter Machining)	CCLN-A Type (Outer Diameter Machining / End Machining)	SCLC-FF Type (without Offset) (External Diameter / End Face Machining)	SCLN Type (without Offset) (External Diameter / End Face Machining)	PCLN-FF Type (without Offset) (External Diameter / End Face Machining)	CORO-TURN RC, Shank Bit for Negative Tips	Shank Tool Bit T-Max P Lever Clamp PCLNR/L	Coromant Capto, Cutting Head, CoroTurn, Ceramic Inserts, CCRNR/L-12-4	T-Max P Cutting Unit For Turning, C-PCLNR/L-12HP	CoroTurn HP Coromant Capto, Cutting Head For Inner Diameter Turning, C-PCLNR/L.-HP	CoroPlex TT Multi-Function Turning Tool, C-TB-CN	Coromant Capto, Cutting Head, CoroTurn 107 Screw Clamp, C-S-CN/BL	Coromant Capto, Cutting Head, CoroTurn Ceramic Inserts, CCLNR/L-4	Coromant Capto, Cutting Head, CoroTurn, Ceramic Inserts, DCLNR/L-12-2	Coromant Capto, Cutting Unit, Multi-Function Tool CoroPlex, TB C-TB-CN12CN12	Coromant Capto, CoroTurn, Cutting Head, B-Axis 45° Tool, C-PCMNN-12HP	Coromant Capto, CoroTurn, Cutting Head, High Pressure Coolant Specification, C8-PCMNN-12HP	Outer Diameter Turning, Shank Tool Bit, CoroTurn 107 Screw Clamp, SCACR/L-S	Outer Diameter Turning, Shank Tool Bit, CoroTurn 107 Screw Clamp, SCLCR/L-S
From	7,315,865 VND	1,944,769 VND	1,990,408 VND	1,983,326 VND	2,008,113 VND	3,777,015 VND	1,983,326 VND	1,739,394 VND	1,803,918 VND	1,701,821 VND	4,825,924 VND	5,519,688 VND	14,107,208 VND	3,310,593 VND	1,739,394 VND	1,944,769 VND	1,851,721 VND	1,851,721 VND	1,771,263 VND	1,771,263 VND	1,739,394 VND	1,739,394 VND	1,739,394 VND	1,739,394 VND	1,983,326 VND	2,031,129 VND	3,746,327 VND	3,746,327 VND	1,701,821 VND	1,663,657 VND	1,813,754 VND	3,405,139 VND	3,447,280 VND	9,772,263 VND	22,638,820 VND	12,668,141 VND	39,085,298 VND	13,931,828 VND	9,772,263 VND	9,772,263 VND	28,909,040 VND	16,745,498 VND	24,557,575 VND	3,339,521 VND	3,339,521 VND
Days to ShipSố ngày giao hàng	7 Day(s) or more	8 Day(s) or more	9 Day(s) or more	6 Day(s) or more	6 Day(s) or more	6 Day(s) or more	6 Day(s) or more	6 Day(s) or more	6 Day(s) or more	6 Day(s) or more	9 Day(s) or more	7 Day(s) or more	7 Day(s) or more	6 Day(s) or more	6 Day(s) or more	6 Day(s) or more	6 Day(s) or more	6 Day(s) or more	6 Day(s) or more	6 Day(s) or more	6 Day(s) or more	6 Day(s) or more	6 Day(s) or more	6 Day(s) or more	6 Day(s) or more	6 Day(s) or more	9 Day(s) or more	9 Day(s) or more	8 Day(s) or more	8 Day(s) or more	9 Day(s) or more	8 Day(s) or more	7 Day(s) or more	7 Day(s) or more	9 Day(s) or more	7 Day(s) or more	9 Day(s) or more	9 Day(s) or more	7 Day(s) or more	7 Day(s) or more	7 Day(s) or more	9 Day(s) or more	9 Day(s) or more	7 Day(s) or more	7 Day(s) or more
Applicable Tip Shape	C (80° Diamond-Shape)	C (80° Diamond-Shape)	C (80° Diamond-Shape)	C (80° Diamond-Shape)	C (80° Diamond-Shape)	C (80° Diamond-Shape)	C (80° Diamond-Shape)	C (80° Diamond-Shape)	C (80° Diamond-Shape)	C (80° Diamond-Shape)	C (80° Diamond-Shape)	C (80° Diamond-Shape)	C (80° Diamond-Shape)	C (80° Diamond-Shape)	C (80° Diamond-Shape)	C (80° Diamond-Shape)	C (80° Diamond-Shape)	C (80° Diamond-Shape)	C (80° Diamond-Shape)	C (80° Diamond-Shape)	C (80° Diamond-Shape)	C (80° Diamond-Shape)	C (80° Diamond-Shape)	C (80° Diamond-Shape)	C (80° Diamond-Shape)	C (80° Diamond-Shape)	C (80° Diamond-Shape)	C (80° Diamond-Shape)	C (80° Diamond-Shape)	C (80° Diamond-Shape)	C (80° Diamond-Shape)	C (80° Diamond-Shape)	C (80° Diamond-Shape)	C (80° Diamond-Shape)	C (80° Diamond-Shape)	C (80° Diamond-Shape)	C (80° Diamond-Shape)	C (80° Diamond-Shape)	C (80° Diamond-Shape)	C (80° Diamond-Shape)	C (80° Diamond-Shape)	C (80° Diamond-Shape)	C (80° Diamond-Shape)	C (80° Diamond-Shape)	C (80° Diamond-Shape)
Applicable Chip Clearance Angle	Negative	Negative	Pozidriv	Pozidriv	Negative	-	Pozidriv	Pozidriv	Negative	Pozidriv	Pozidriv	Negative	Negative	Negative	Pozidriv	Negative	Negative	Negative	Negative	Negative	Pozidriv	Pozidriv	Pozidriv	Pozidriv	Pozidriv	Negative	Negative	Negative	Pozidriv	Negative	Negative	Negative	Negative	-	-	-	-	-	-	-	-	-	-	Pozidriv	Pozidriv
Selfishly	Right-hand / Left-hand	Right-hand	Right-hand / Left-hand	Left-hand	Right-hand / Left-hand	Right-hand / Left-hand	Right-hand	Left-hand	Right-hand / Left-hand	Right-hand / Left-hand	Left-hand	Right-hand / Left-hand	Right-hand / Left-hand	Right-hand / Left-hand	Right-hand / Left-hand	Left-hand	Right-hand / Left-hand	Right-hand / Left-hand	Left-hand	Right-hand	Left-hand	Right-hand	Right-hand / Left-hand	Right-hand	Right-hand	Right-hand / Left-hand	Right-hand / Left-hand	Right-hand / Left-hand	Right-hand / Left-hand	Right-hand	Right-hand	Right-hand / Left-hand	Right-hand	Right-hand / Left-hand	Right-hand / Left-hand	Right-hand / Left-hand	No-hand	No-hand	Right-hand / Left-hand	Right-hand / Left-hand	No-hand	No-hand	No-hand	Right-hand / Left-hand	Right-hand / Left-hand
Application	Outer Diameter / End Face / Chamfer	Outer Diameter / End Face	Outer Diameter / End Face	Outer Diameter / End Face	Outer Diameter / End Face	Outer Diameter / End Face	Outer Diameter / End Face	Outer Diameter / End Face	Outer Diameter / End Face	Outer Diameter / End Face	Outer Diameter / End Face	Outer Diameter	Outer Diameter / End Face / Chamfer	Outer Diameter / End Face	Outer Diameter / End Face	Outer Diameter / End Face	Outer Diameter	End Face	Outer Diameter / End Face	Outer Diameter / End Face	Outer Diameter / End Face	Outer Diameter / End Face	Outer Diameter	Outer Diameter / End Face	Outer Diameter / End Face	Outer Diameter / End Face	Outer Diameter	Outer Diameter / End Face	Outer Diameter / End Face	Outer Diameter / End Face	Outer Diameter / End Face	Outer Diameter / End Face / Chamfer	Outer Diameter / End Face / Profiling / Chamfer	Outer Diameter	Outer Diameter / End Face / Chamfer	Outer Diameter / End Face / Chamfer	Outer Diameter / End Face / Profiling / Chamfer	Outer Diameter / End Face / Chamfer	Outer Diameter / End Face / Chamfer	Outer Diameter / End Face / Chamfer	Outer Diameter / End Face / Profiling / Chamfer / Post-Grinding	Outer Diameter / End Face / Chamfer	Outer Diameter / End Face / Chamfer	Outer Diameter / Chamfer	Outer Diameter / End Face / Chamfer
Clamp Shape	Pin Lock	Cable clamp	Back Surface Clamp	Lever lock / Back Surface Clamp	Cable clamp	Clamp-on	Lever lock	Screw-on	Lever lock	Screw-on	Screw-on	Cable clamp	Pin Lock	Lever lock	-	Cable clamp	Lever lock	Lever lock	Lever lock	Lever lock	Screw-on	Screw-on	Screw-on	Screw-on	Lever lock	Clamp-on	Clamp-on	Clamp-on	Screw-on	Screw-on	Lever lock	Cable clamp	Lever lock	Clamp-on	-	Lever lock	-	Clamp-on	Clamp-on	Cable clamp	-	-	Lever lock	Clamp-on	Clamp-on
Shank height(mm)	-	20 ～ 25	-	8 ～ 20	20 ～ 25	25	8 ～ 20	10 ～ 12	16 ～ 32	10 ～ 25	11 ～ 23	25 ～ 32	-	40	8 ～ 20	20 ～ 25	20 ～ 25	20 ～ 25	16 ～ 32	16 ～ 32	8 ～ 25	8 ～ 25	10 ～ 12	10 ～ 12	10 ～ 16	-	-	-	8 ～ 18	-	-	20 ～ 32	20	-	-	-	0	-	-	-	-	-	-	8	8
Shank width(mm)	-	20 ～ 25	-	10 ～ 20	20 ～ 25	25	10 ～ 20	10 ～ 15	16 ～ 32	10 ～ 25	11 ～ 23	25	-	40	8 ～ 20	20 ～ 25	20 ～ 25	20 ～ 25	16 ～ 32	16 ～ 32	8 ～ 25	8 ～ 25	10 ～ 15	10 ～ 15	10 ～ 16	-	-	-	8 ～ 16	-	-	20 ～ 32	20	-	-	-	-	-	-	-	-	-	-	8	8

Loading...Tải…