(!) Since support from Microsoft will end on January 14th, 2020, Windows 7 will be excluded from the recommended environment from December 15th, 2019 on this site. Vì lý do Microsoft kết thúc hỗ trợ cho Windows 7 vào ngày 14/01/2020, Windows 7 sẽ là hệ điều hành không được khuyến khích sử dụng với trang web này từ ngày 15/12/2019.
Tel: 0222-361-1555
Email: [email protected]
8:00 - 17:00 (Mon - Sat)
Search by Category / Brand Tìm theo danh mục, nhãn hiệu
Search by Category Tìm theo danh mục
- [Thông báo] Cập nhật địa chỉ kho tập kết hàng hóa tại khu vực miền Nam của MISUMI Việt Nam. Xem chi tiết.
[Announcement] Update on warehouse address in the Southern region of MISUIMI Vietnam. See more. - [Cảnh Báo] Thủ Đoạn Lừa Đảo Từ Nhân Viên Giao Hàng – Yêu Cầu Trả Phí Ship. Xem chi tiết.
[Warning] Fraud Calling from Shipper - Asking to Pay Shipping Fee. See more.
Turning Inserts（Shape：D (55° Diamond-Shape) Page3）
[What is turning?]
A shape is created by rotating the work material and cutting the surface while pressing the cutting edge. Processing methods can be divided into outer diameter processing, threading, inner diameter processing, and cut-off processing. The model numbers written on the insert and holder are codes unique to each tool manufacturer. Understanding how to read the model number provides basic information such as shape, type, and size. In many cases, cutting conditions are written on the label of the insert case, so check it before use.
Brand |
|
|---|---|
| CAD |
|
| Days to Ship |
|
213 itemsMặt hàng
- Sort By
-
You can add up to 6 items per a category to the compare list.
Replacement Blade Insert D (55° Diamond) DCGT-T-MN-FC
SUMITOMO ELECTRIC HARDMETAL
It is a diamond-shaped chip. [Features of the grade]・AC5015S has more than twice the wear resistance compared to conventional models and is the first recommended grade for turning difficult-to-cut materials・AC5025S has chipping resistance that is 1.5 times higher than conventional grades Grade for interrupted machining and turning of difficult-to-cut materials.
Shape work material Application Available corners Breaker Use Rake angle Nose R Selfishly Groove Width (For Grooving / Plunging) Pitch (for Threading) O.D./ I.D. (For Threading) Screw Types (for threading) Number of threads (for threading) D (55° Diamond-Shape) Steel / Stainless Steel / Cast Iron / Non-ferrous metal Outer Diameter/Inner Diameter - Finish Pozidriv 0.2 - - - - - - From: 406,350 VND Days to Ship: Số ngày giao hàng: 9 Day(s) 
9 Day(s)
-
You can add up to 6 items per a category to the compare list.
Replacement Blade Insert D (55° Diamond) DCGT-T-MN-SI
SUMITOMO ELECTRIC HARDMETAL
A diamond-shaped insert.
Shape work material Application Available corners Breaker Use Rake angle Nose R Selfishly Groove Width (For Grooving / Plunging) Pitch (for Threading) O.D./ I.D. (For Threading) Screw Types (for threading) Number of threads (for threading) D (55° Diamond-Shape) Steel / Stainless Steel / Cast Iron / Non-ferrous metal / Heat-resistant alloy, titanium alloy Outer Diameter/Inner Diameter - - Pozidriv 0.2 ～ Other No-hand - - - - - From: 350,418 VND Days to Ship: Số ngày giao hàng: 6 Day(s) or more
6 Day(s) or more
-
You can add up to 6 items per a category to the compare list.
Blade Replacement Insert D (55° Rhombic) DCGT-T-N-AG
SUMITOMO ELECTRIC HARDMETAL
A diamond-shaped insert.
Shape work material Application Available corners Breaker Use Rake angle Nose R Selfishly Groove Width (For Grooving / Plunging) Pitch (for Threading) O.D./ I.D. (For Threading) Screw Types (for threading) Number of threads (for threading) D (55° Diamond-Shape) Cast Iron Outer Diameter/Inner Diameter - - Pozidriv 0.2 ～ 0.8 No-hand - - - - - From: 315,931 VND Days to Ship: Số ngày giao hàng: 6 Day(s) or more
6 Day(s) or more
-
You can add up to 6 items per a category to the compare list.
Replacement Blade Insert D (55° Diamond) DCGT-T-R-FY
SUMITOMO ELECTRIC HARDMETAL
A diamond-shaped insert.
Shape work material Application Available corners Breaker Use Rake angle Nose R Selfishly Groove Width (For Grooving / Plunging) Pitch (for Threading) O.D./ I.D. (For Threading) Screw Types (for threading) Number of threads (for threading) D (55° Diamond-Shape) Steel / Stainless Steel / Cast Iron / Non-ferrous metal / Heat-resistant alloy, titanium alloy Outer Diameter/Inner Diameter - Finish Pozidriv 0.2 ～ Other Right-hand - - - - - From: 350,418 VND Days to Ship: Số ngày giao hàng: 6 Day(s) or more
6 Day(s) or more
-
You can add up to 6 items per a category to the compare list.
Blade Replacement Insert D (55° Rhombic) DCGT-T-R-SD
SUMITOMO ELECTRIC HARDMETAL
Rhombus insert.
Shape work material Application Available corners Breaker Use Rake angle Nose R Selfishly Groove Width (For Grooving / Plunging) Pitch (for Threading) O.D./ I.D. (For Threading) Screw Types (for threading) Number of threads (for threading) D (55° Diamond-Shape) Steel / Stainless Steel / Cast Iron / Non-ferrous metal Outer Diameter/Inner Diameter - - Pozidriv 0.4 ～ 0.8 Right-hand - - - - - From: 353,605 VND Days to Ship: Số ngày giao hàng: 6 Day(s) or more
6 Day(s) or more
-
You can add up to 6 items per a category to the compare list.
Blade Replacement Insert D (55° Rhombic) DCMT-N-FP
SUMITOMO ELECTRIC HARDMETAL
Rhombus insert.
Shape work material Application Available corners Breaker Use Rake angle Nose R Selfishly Groove Width (For Grooving / Plunging) Pitch (for Threading) O.D./ I.D. (For Threading) Screw Types (for threading) Number of threads (for threading) D (55° Diamond-Shape) Steel / Stainless Steel / Cast Iron / Non-ferrous metal Outer Diameter/Inner Diameter - Finish Pozidriv 0.2 ～ 0.4 No-hand - - - - - From: 136,470 VND Days to Ship: Số ngày giao hàng: 9 Day(s)
9 Day(s)
-
You can add up to 6 items per a category to the compare list.
55° Diamond-Shape With Hole, Positive 7°, DCMT-LU, For Finishing To Light Cutting
SUMITOMO ELECTRIC HARDMETAL
[Features]· Breaker with significantly improved chip control during detailed cutting.
Shape work material Application Available corners Breaker Use Rake angle Nose R Selfishly Groove Width (For Grooving / Plunging) Pitch (for Threading) O.D./ I.D. (For Threading) Screw Types (for threading) Number of threads (for threading) D (55° Diamond-Shape) Steel / Stainless Steel / Cast Iron / Non-ferrous metal / Heat-resistant alloy, titanium alloy Outer Diameter/Inner Diameter - Finish Pozidriv 0.2 ～ 0.8 No-hand - - - - - From: 136,470 VND Days to Ship: Số ngày giao hàng: 6 Day(s) or more
6 Day(s) or more
-
You can add up to 6 items per a category to the compare list.
Blade Replacement Insert D (55° Rhombic) DCMT-T-N-FP
SUMITOMO ELECTRIC HARDMETAL
Rhombus insert.
Shape work material Application Available corners Breaker Use Rake angle Nose R Selfishly Groove Width (For Grooving / Plunging) Pitch (for Threading) O.D./ I.D. (For Threading) Screw Types (for threading) Number of threads (for threading) D (55° Diamond-Shape) Steel / Stainless Steel / Cast Iron / Non-ferrous metal Outer Diameter/Inner Diameter - Finish Pozidriv 0.8 No-hand - - - - - From: 180,295 VND Days to Ship: Số ngày giao hàng: 6 Day(s) or more
6 Day(s) or more
-
You can add up to 6 items per a category to the compare list.
Blade Replacement Insert D (55° Rhombic) DCMT-T-N-LU
SUMITOMO ELECTRIC HARDMETAL
Rhombus insert.
Shape work material Application Available corners Breaker Use Rake angle Nose R Selfishly Groove Width (For Grooving / Plunging) Pitch (for Threading) O.D./ I.D. (For Threading) Screw Types (for threading) Number of threads (for threading) D (55° Diamond-Shape) Steel / Stainless Steel / Cast Iron / Non-ferrous metal / Heat-resistant alloy, titanium alloy Outer Diameter/Inner Diameter - Finish Pozidriv 0.2 ～ 0.8 No-hand - - - - - From: 180,295 VND Days to Ship: Số ngày giao hàng: 6 Day(s) or more
6 Day(s) or more
-
You can add up to 6 items per a category to the compare list.
55° Diamond-Shape With Hole, Positive 7°, DCMT-MU, For Light To Medium Cutting
SUMITOMO ELECTRIC HARDMETAL
[Features]· Low-resistance breaker with a predictable service life.
Shape work material Application Available corners Breaker Use Rake angle Nose R Selfishly Groove Width (For Grooving / Plunging) Pitch (for Threading) O.D./ I.D. (For Threading) Screw Types (for threading) Number of threads (for threading) D (55° Diamond-Shape) Steel / Stainless Steel / Cast Iron Outer Diameter/Inner Diameter - - Pozidriv 0.4 ～ 0.8 No-hand - - - - - From: 214,479 VND Days to Ship: Số ngày giao hàng: 6 Day(s) or more
6 Day(s) or more
-
You can add up to 6 items per a category to the compare list.
55° Diamond-Shape With Hole, 55°, Positive 7°, DCMT-SU, For Light To Medium Cutting
SUMITOMO ELECTRIC HARDMETAL
[Features]· General-purpose breaker with excellent sharpness.
Shape work material Application Available corners Breaker Use Rake angle Nose R Selfishly Groove Width (For Grooving / Plunging) Pitch (for Threading) O.D./ I.D. (For Threading) Screw Types (for threading) Number of threads (for threading) D (55° Diamond-Shape) Steel / Stainless Steel / Cast Iron / Non-ferrous metal / Heat-resistant alloy, titanium alloy Outer Diameter/Inner Diameter - - Pozidriv 0.2 ～ 0.8 No-hand - - - - - From: 160,523 VND Days to Ship: Số ngày giao hàng: 6 Day(s) or more
6 Day(s) or more
-
You can add up to 6 items per a category to the compare list.
Blade Replacement Insert D (55° Rhombic) DNGG-L-UM
SUMITOMO ELECTRIC HARDMETAL
Rhombus insert.
Shape work material Application Available corners Breaker Use Rake angle Nose R Selfishly Groove Width (For Grooving / Plunging) Pitch (for Threading) O.D./ I.D. (For Threading) Screw Types (for threading) Number of threads (for threading) D (55° Diamond-Shape) Steel / Stainless Steel / Cast Iron / Non-ferrous metal / Heat-resistant alloy, titanium alloy Outer Diameter/Inner Diameter - Finish / Medium grinding Negative 0.2 ～ 0.8 Left-hand / No-hand - - - - - From: 297,826 VND Days to Ship: Số ngày giao hàng: 6 Day(s) or more
6 Day(s) or more
-
You can add up to 6 items per a category to the compare list.
Blade Replacement Insert D (55° Rhombic) DNGG-R-UM
SUMITOMO ELECTRIC HARDMETAL
A diamond-shaped insert.
Shape work material Application Available corners Breaker Use Rake angle Nose R Selfishly Groove Width (For Grooving / Plunging) Pitch (for Threading) O.D./ I.D. (For Threading) Screw Types (for threading) Number of threads (for threading) D (55° Diamond-Shape) Steel / Stainless Steel / Cast Iron / Non-ferrous metal Outer Diameter/Inner Diameter - Medium grinding Negative 0.4 ～ 0.8 Right-hand - - - - - From: 297,826 VND Days to Ship: Số ngày giao hàng: 6 Day(s) or more
6 Day(s) or more
-
You can add up to 6 items per a category to the compare list.
Blade Replacement Insert D (55° Rhombic) DNMG-L-HM
SUMITOMO ELECTRIC HARDMETAL
Rhombus insert.
Shape work material Application Available corners Breaker Use Rake angle Nose R Selfishly Groove Width (For Grooving / Plunging) Pitch (for Threading) O.D./ I.D. (For Threading) Screw Types (for threading) Number of threads (for threading) D (55° Diamond-Shape) Steel / Stainless Steel / Cast Iron Outer Diameter/Inner Diameter - - Negative 0.4 ～ 0.8 Left-hand - - - - - From: 234,478 VND Days to Ship: Số ngày giao hàng: 6 Day(s) or more
6 Day(s) or more
-
You can add up to 6 items per a category to the compare list.
Blade Replacement Insert D (55° Rhombic) DNMG-L-UM
SUMITOMO ELECTRIC HARDMETAL
Rhombus insert.
Shape work material Application Available corners Breaker Use Rake angle Nose R Selfishly Groove Width (For Grooving / Plunging) Pitch (for Threading) O.D./ I.D. (For Threading) Screw Types (for threading) Number of threads (for threading) D (55° Diamond-Shape) Steel / Stainless Steel / Cast Iron / Non-ferrous metal Outer Diameter/Inner Diameter - Medium grinding Negative 0.4 ～ 0.8 Left-hand - - - - - From: 234,478 VND Days to Ship: Số ngày giao hàng: 6 Day(s) or more
6 Day(s) or more
-
You can add up to 6 items per a category to the compare list.
55° Diamond-Shape With Hole, Negative, DNMG-EF, For Finish Cutting
SUMITOMO ELECTRIC HARDMETAL
[Features]・ A chip breaker for finishing with excellent chip discharge performance.
Shape work material Application Available corners Breaker Use Rake angle Nose R Selfishly Groove Width (For Grooving / Plunging) Pitch (for Threading) O.D./ I.D. (For Threading) Screw Types (for threading) Number of threads (for threading) D (55° Diamond-Shape) Steel / Stainless Steel / Cast Iron / Non-ferrous metal / Heat-resistant alloy, titanium alloy Outer Diameter/Inner Diameter - Finish Negative 0.4 ～ 1.2 No-hand - - - - - From: 194,658 VND Days to Ship: Số ngày giao hàng: 6 Day(s) or more
6 Day(s) or more
-
You can add up to 6 items per a category to the compare list.
Blade Replacement Insert D (55° Rhombic) DNMG-N-FA
SUMITOMO ELECTRIC HARDMETAL
Rhombus insert.
Shape work material Application Available corners Breaker Use Rake angle Nose R Selfishly Groove Width (For Grooving / Plunging) Pitch (for Threading) O.D./ I.D. (For Threading) Screw Types (for threading) Number of threads (for threading) D (55° Diamond-Shape) Steel / Stainless Steel / Cast Iron / Non-ferrous metal Outer Diameter/Inner Diameter - - Negative 0.4 ～ 0.8 No-hand - - - - - From: 215,355 VND Days to Ship: Số ngày giao hàng: 6 Day(s) or more
6 Day(s) or more
-
You can add up to 6 items per a category to the compare list.
Blade Replacement Insert D (55° Rhombic) DNMG-N-FL
SUMITOMO ELECTRIC HARDMETAL
Rhombus insert.
Shape work material Application Available corners Breaker Use Rake angle Nose R Selfishly Groove Width (For Grooving / Plunging) Pitch (for Threading) O.D./ I.D. (For Threading) Screw Types (for threading) Number of threads (for threading) D (55° Diamond-Shape) Steel / Stainless Steel / Cast Iron / Non-ferrous metal Outer Diameter/Inner Diameter - - Negative 0.4 ～ 1.2 No-hand - - - - - From: 215,355 VND Days to Ship: Số ngày giao hàng: 6 Day(s) or more
6 Day(s) or more
-
You can add up to 6 items per a category to the compare list.
55° Diamond-Shape With Hole, Negative, DNMG-GE, For Medium Cutting
SUMITOMO ELECTRIC HARDMETAL
[Features]· General-purpose breaker with a wear-resistant rake surface, even during high-efficiency machining.
Shape work material Application Available corners Breaker Use Rake angle Nose R Selfishly Groove Width (For Grooving / Plunging) Pitch (for Threading) O.D./ I.D. (For Threading) Screw Types (for threading) Number of threads (for threading) D (55° Diamond-Shape) Steel / Stainless Steel / Cast Iron Outer Diameter/Inner Diameter - Medium grinding Negative 0.4 ～ 1.6 No-hand - - - - - From: 194,658 VND Days to Ship: Số ngày giao hàng: 6 Day(s) or more
6 Day(s) or more
-
You can add up to 6 items per a category to the compare list.
55° Diamond-Shape With Hole, Negative, DNMG-GU, For Medium Cutting
SUMITOMO ELECTRIC HARDMETAL
[Features]・ A general-purpose chip breaker that has low resistance and is resistant to wear.
Shape work material Application Available corners Breaker Use Rake angle Nose R Selfishly Groove Width (For Grooving / Plunging) Pitch (for Threading) O.D./ I.D. (For Threading) Screw Types (for threading) Number of threads (for threading) D (55° Diamond-Shape) Steel / Stainless Steel / Cast Iron / Non-ferrous metal / Heat-resistant alloy, titanium alloy Outer Diameter/Inner Diameter - Medium grinding Negative 0.4 ～ 1.6 No-hand - - - - - From: 175,867 VND Days to Ship: Số ngày giao hàng: 6 Day(s) or more
6 Day(s) or more
-
You can add up to 6 items per a category to the compare list.
Blade Replacement Insert D (55° Rhombic) DNMG-N-GZ
SUMITOMO ELECTRIC HARDMETAL
Rhombus insert.
Shape work material Application Available corners Breaker Use Rake angle Nose R Selfishly Groove Width (For Grooving / Plunging) Pitch (for Threading) O.D./ I.D. (For Threading) Screw Types (for threading) Number of threads (for threading) D (55° Diamond-Shape) Steel / Cast Iron Outer Diameter/Inner Diameter - - Negative 0.4 ～ 1.2 No-hand - - - - - From: 234,478 VND Days to Ship: Số ngày giao hàng: 6 Day(s) or more
6 Day(s) or more
-
You can add up to 6 items per a category to the compare list.
Blade Replacement Insert D (55° Rhombic) DNMG-N-LU
SUMITOMO ELECTRIC HARDMETAL
[Features]・ A chip breaker that is effective for cutting depth changes and chip disposal during profiling.
Shape work material Application Available corners Breaker Use Rake angle Nose R Selfishly Groove Width (For Grooving / Plunging) Pitch (for Threading) O.D./ I.D. (For Threading) Screw Types (for threading) Number of threads (for threading) D (55° Diamond-Shape) Steel / Stainless Steel / Cast Iron / Non-ferrous metal / Heat-resistant alloy, titanium alloy Outer Diameter/Inner Diameter - Finish Negative 0.2 ～ 1.2 No-hand - - - - - From: 197,823 VND Days to Ship: Số ngày giao hàng: 6 Day(s) or more
6 Day(s) or more
-
You can add up to 6 items per a category to the compare list.
55° Diamond-Shape With Hole, Negative, DNMG-ME, For Medium To Rough Cutting
SUMITOMO ELECTRIC HARDMETAL
[Features]· Breaker for rough cutting that minimizes rake surface damage and which supports high-feed machining.
Shape work material Application Available corners Breaker Use Rake angle Nose R Selfishly Groove Width (For Grooving / Plunging) Pitch (for Threading) O.D./ I.D. (For Threading) Screw Types (for threading) Number of threads (for threading) D (55° Diamond-Shape) Steel / Stainless Steel / Cast Iron Outer Diameter/Inner Diameter - Medium to coarse grinding Negative 0.8 ～ 1.6 No-hand - - - - - From: 230,193 VND Days to Ship: Số ngày giao hàng: 6 Day(s) or more
6 Day(s) or more
-
You can add up to 6 items per a category to the compare list.
55° Diamond-Shape With Hole, Negative, DNMG-MU, For Medium To Rough Cutting
SUMITOMO ELECTRIC HARDMETAL
[Features]· An economical, double-sided breaker with low resistance, suitable for high-feed machining.
Shape work material Application Available corners Breaker Use Rake angle Nose R Selfishly Groove Width (For Grooving / Plunging) Pitch (for Threading) O.D./ I.D. (For Threading) Screw Types (for threading) Number of threads (for threading) D (55° Diamond-Shape) Steel / Stainless Steel / Cast Iron / Heat-resistant alloy, titanium alloy Outer Diameter/Inner Diameter - Medium to coarse grinding Negative 0.8 ～ 1.6 No-hand - - - - - From: 208,719 VND Days to Ship: Số ngày giao hàng: 6 Day(s) or more
6 Day(s) or more
-
You can add up to 6 items per a category to the compare list.
55° Diamond-Shape With Hole, Negative, DNMG-MX, For Medium To Rough Cutting
SUMITOMO ELECTRIC HARDMETAL
[Features]· Breaker with excellent cutting edge strength, for intermittent cutting.
Shape work material Application Available corners Breaker Use Rake angle Nose R Selfishly Groove Width (For Grooving / Plunging) Pitch (for Threading) O.D./ I.D. (For Threading) Screw Types (for threading) Number of threads (for threading) D (55° Diamond-Shape) Steel / Stainless Steel / Cast Iron Outer Diameter/Inner Diameter - Medium to coarse grinding Negative 0.8 ～ 1.2 No-hand - - - - - From: 230,193 VND Days to Ship: Số ngày giao hàng: 6 Day(s) or more
6 Day(s) or more
-
You can add up to 6 items per a category to the compare list.
55° Diamond-Shape With Hole, Negative, DNMG-SE, For Finish Cutting
SUMITOMO ELECTRIC HARDMETAL
[Features]· Breaker made to reduce rake surface tool damage.· Also effective for high-efficiency machining.
Shape work material Application Available corners Breaker Use Rake angle Nose R Selfishly Groove Width (For Grooving / Plunging) Pitch (for Threading) O.D./ I.D. (For Threading) Screw Types (for threading) Number of threads (for threading) D (55° Diamond-Shape) Steel / Stainless Steel / Cast Iron / Non-ferrous metal Outer Diameter/Inner Diameter - Finish Negative 0.4 ～ 1.2 No-hand - - - - - From: 194,658 VND Days to Ship: Số ngày giao hàng: 6 Day(s) or more
6 Day(s) or more
-
You can add up to 6 items per a category to the compare list.
55° Diamond-Shape With Hole, Negative, DNMG-SU, For Finish Cutting
SUMITOMO ELECTRIC HARDMETAL
[Features]· Proven performance for small cutting and high feed rates.
Shape work material Application Available corners Breaker Use Rake angle Nose R Selfishly Groove Width (For Grooving / Plunging) Pitch (for Threading) O.D./ I.D. (For Threading) Screw Types (for threading) Number of threads (for threading) D (55° Diamond-Shape) Steel / Stainless Steel / Cast Iron / Non-ferrous metal / Heat-resistant alloy, titanium alloy Outer Diameter/Inner Diameter - Finish Negative 0.2 ～ 1.2 No-hand - - - - - From: 194,658 VND Days to Ship: Số ngày giao hàng: 6 Day(s) or more
6 Day(s) or more
-
You can add up to 6 items per a category to the compare list.
55° Diamond-Shape With Hole, Negative, DNMG-SX, For Light To Medium Cutting
SUMITOMO ELECTRIC HARDMETAL
[Features]· Capable of profiling and step milling.
Shape work material Application Available corners Breaker Use Rake angle Nose R Selfishly Groove Width (For Grooving / Plunging) Pitch (for Threading) O.D./ I.D. (For Threading) Screw Types (for threading) Number of threads (for threading) D (55° Diamond-Shape) Steel / Stainless Steel / Cast Iron / Non-ferrous metal Outer Diameter/Inner Diameter - - Negative 0.4 ～ 1.2 No-hand - - - - - From: 208,719 VND Days to Ship: Số ngày giao hàng: 6 Day(s) or more
6 Day(s) or more
-
You can add up to 6 items per a category to the compare list.
55° Diamond-Shape With Hole, Negative, DNMG-UG, For Medium Cutting
SUMITOMO ELECTRIC HARDMETAL
[Features]· A best-selling, versatile breaker.
Shape work material Application Available corners Breaker Use Rake angle Nose R Selfishly Groove Width (For Grooving / Plunging) Pitch (for Threading) O.D./ I.D. (For Threading) Screw Types (for threading) Number of threads (for threading) D (55° Diamond-Shape) Steel / Stainless Steel / Cast Iron Outer Diameter/Inner Diameter - Medium grinding Negative 0.4 ～ 1.6 No-hand - - - - - From: 194,658 VND Days to Ship: Số ngày giao hàng: 6 Day(s) or more
6 Day(s) or more
-
You can add up to 6 items per a category to the compare list.
Blade Replacement Insert D (55° Rhombic) DNMG-N-UP
SUMITOMO ELECTRIC HARDMETAL
Rhombus insert.
Shape work material Application Available corners Breaker Use Rake angle Nose R Selfishly Groove Width (For Grooving / Plunging) Pitch (for Threading) O.D./ I.D. (For Threading) Screw Types (for threading) Number of threads (for threading) D (55° Diamond-Shape) Steel / Stainless Steel / Cast Iron / Non-ferrous metal / Heat-resistant alloy, titanium alloy Outer Diameter/Inner Diameter - - Negative 0.4 ～ 1.2 No-hand - - - - - From: 191,604 VND Days to Ship: Số ngày giao hàng: 6 Day(s) or more
6 Day(s) or more
-
You can add up to 6 items per a category to the compare list.
55° Diamond-Shape With Hole, Negative, DNMG-UX, For Medium Cutting
SUMITOMO ELECTRIC HARDMETAL
[Features]· A reliable, general-purpose breaker with high cutting edge strength.
Shape work material Application Available corners Breaker Use Rake angle Nose R Selfishly Groove Width (For Grooving / Plunging) Pitch (for Threading) O.D./ I.D. (For Threading) Screw Types (for threading) Number of threads (for threading) D (55° Diamond-Shape) Steel / Stainless Steel / Cast Iron Outer Diameter/Inner Diameter - Medium grinding Negative 0.4 ～ 1.6 No-hand - - - - - From: 194,658 VND Days to Ship: Số ngày giao hàng: 6 Day(s) or more
6 Day(s) or more
-
You can add up to 6 items per a category to the compare list.
55° Diamond-Shape With Hole, Negative, DNMG-HM, For Medium To Rough Cutting
SUMITOMO ELECTRIC HARDMETAL
[Features]· Wide-width, low-resistance, M-class breaker with right/left-handedness, for medium to rough cutting.
Shape work material Application Available corners Breaker Use Rake angle Nose R Selfishly Groove Width (For Grooving / Plunging) Pitch (for Threading) O.D./ I.D. (For Threading) Screw Types (for threading) Number of threads (for threading) D (55° Diamond-Shape) Steel / Stainless Steel / Cast Iron Outer Diameter/Inner Diameter - Medium to coarse grinding Negative 0.4 ～ 0.8 Right-hand - - - - - From: 208,719 VND Days to Ship: Số ngày giao hàng: 6 Day(s) or more
6 Day(s) or more
-
You can add up to 6 items per a category to the compare list.
Blade Replacement Insert D (55° Rhombic) DNMG-R-UM
SUMITOMO ELECTRIC HARDMETAL
Rhombus insert.
Shape work material Application Available corners Breaker Use Rake angle Nose R Selfishly Groove Width (For Grooving / Plunging) Pitch (for Threading) O.D./ I.D. (For Threading) Screw Types (for threading) Number of threads (for threading) D (55° Diamond-Shape) Steel / Stainless Steel / Cast Iron / Non-ferrous metal Outer Diameter/Inner Diameter - Medium grinding Negative 0.4 ～ 0.8 Right-hand - - - - - From: 208,719 VND Days to Ship: Số ngày giao hàng: 6 Day(s) or more
6 Day(s) or more
-
You can add up to 6 items per a category to the compare list.
55° Diamond-Shape With Hole, Negative, DNMM-HP, For Heavy Cutting
SUMITOMO ELECTRIC HARDMETAL
[Features]· Breaker for heavy-cutting featuring the highest cutting edge strength.
Shape work material Application Available corners Breaker Use Rake angle Nose R Selfishly Groove Width (For Grooving / Plunging) Pitch (for Threading) O.D./ I.D. (For Threading) Screw Types (for threading) Number of threads (for threading) D (55° Diamond-Shape) Steel / Stainless Steel / Cast Iron Outer Diameter/Inner Diameter - Heavy cutting Negative 0.4 ～ 1.6 No-hand - - - - - From: 308,602 VND Days to Ship: Số ngày giao hàng: 6 Day(s) or more
6 Day(s) or more
-
You can add up to 6 items per a category to the compare list.
55° Diamond-Shape With Hole And Wiper Edge, Negative, DNMX-SEW, For Finish Cutting
SUMITOMO ELECTRIC HARDMETAL
[Features]· Breaker with wiper edge for new high-feed finishing.
Shape work material Application Available corners Breaker Use Rake angle Nose R Selfishly Groove Width (For Grooving / Plunging) Pitch (for Threading) O.D./ I.D. (For Threading) Screw Types (for threading) Number of threads (for threading) D (55° Diamond-Shape) Steel / Stainless Steel / Cast Iron / Non-ferrous metal Outer Diameter/Inner Diameter - Finish Negative 0.4 ～ 1.2 No-hand - - - - - From: 194,658 VND Days to Ship: Số ngày giao hàng: 6 Day(s) or more
6 Day(s) or more
-
You can add up to 6 items per a category to the compare list.
Negative Type 55°, Diamond-Shaped Tip, for Finishing
ISCAR
ISCAR cutting insert.
Shape work material Application Available corners Breaker Use Rake angle Nose R Selfishly Groove Width (For Grooving / Plunging) Pitch (for Threading) O.D./ I.D. (For Threading) Screw Types (for threading) Number of threads (for threading) D (55° Diamond-Shape) Steel / Stainless Steel / Non-ferrous metal / Heat-resistant alloy, titanium alloy Outer Diameter/Inner Diameter 2 Finish Negative 0.4 - - - Outer Diameter - - From: 177,101 VND Days to Ship: Số ngày giao hàng: 7 Day(s) or more
7 Day(s) or more
-
You can add up to 6 items per a category to the compare list.
Diamond Shape 55° / Positive CBN
KYOCERA
DCMW
Shape work material Application Available corners Breaker Use Rake angle Nose R Selfishly Groove Width (For Grooving / Plunging) Pitch (for Threading) O.D./ I.D. (For Threading) Screw Types (for threading) Number of threads (for threading) D (55° Diamond-Shape) Cast Iron / High Hardness Material Outer Diameter/Inner Diameter 1 / 2 - Pozidriv 0.2 ～ 1.2 No-hand - - - - - From: 826,418 VND Days to Ship: Số ngày giao hàng: 6 Day(s) or more
6 Day(s) or more
-
You can add up to 6 items per a category to the compare list.
SANDVIK
Unique shape exhibits high performance
Shape work material Application Available corners Breaker Use Rake angle Nose R Selfishly Groove Width (For Grooving / Plunging) Pitch (for Threading) O.D./ I.D. (For Threading) Screw Types (for threading) Number of threads (for threading) D (55° Diamond-Shape) Cast Iron / Non-ferrous metal / High Hardness Material Outer Diameter/Inner Diameter 2 - Negative 0.8 ～ 1.2 No-hand - - - - - From: 405,262 VND Days to Ship: Số ngày giao hàng: 6 Day(s) or more
6 Day(s) or more
-
You can add up to 6 items per a category to the compare list.
Turning Insert Diamond 55°, Negative, with Hole, DNMG15○○PP "for Finishing"
KYOCERA
[Specifications]· Shape: D (55° Rhombus)· Number of Available Corners: 4· Rake Angle: Negative· Handedness: No handedness[Applications]· Machining Applications: For Outer Diameter / Inner Diameter· Breaker Application: Finishing
Shape work material Application Available corners Breaker Use Rake angle Nose R Selfishly Groove Width (For Grooving / Plunging) Pitch (for Threading) O.D./ I.D. (For Threading) Screw Types (for threading) Number of threads (for threading) D (55° Diamond-Shape) Steel Outer Diameter/Inner Diameter 4 Finish Negative 0.2 ～ 1.2 No-hand - - - - - From: 220,050 VND Days to Ship: Số ngày giao hàng: 6 Day(s) or more
6 Day(s) or more
-
You can add up to 6 items per a category to the compare list.
Turning Insert Diamond 55°, Negative, with Hole, DNMG11○○GP "for Finishing"
KYOCERA
[Specifications]· Shape: D (55° Diamond)· Number of Usable Corners: 4· Rake Angle: Negative· Handedness: No Handedness[Applications]· Machining Applications: For O.D., I.D.· Breaker Applications: Finishing
Shape work material Application Available corners Breaker Use Rake angle Nose R Selfishly Groove Width (For Grooving / Plunging) Pitch (for Threading) O.D./ I.D. (For Threading) Screw Types (for threading) Number of threads (for threading) D (55° Diamond-Shape) Steel / Stainless Steel / Cast Iron Outer Diameter/Inner Diameter 4 Finish Negative 0.4 ～ 0.8 No-hand - - - - - From: 148,150 VND Days to Ship: Số ngày giao hàng: 8 Day(s) or more
8 Day(s) or more
-
You can add up to 6 items per a category to the compare list.
Turning Insert Diamond 55°, Negative, with Hole, DNMG15○○PQ "for Finishing to Intermediate Cutting"
KYOCERA
[Specifications]· Shape: D (55° Rhombus)· Number of Available Corners: 4· Rake Angle: Negative· Handedness: No handedness[Applications]· Machining Applications: For Outer Diameter / Inner Diameter· Breaker Application: Medium Cutting
Shape work material Application Available corners Breaker Use Rake angle Nose R Selfishly Groove Width (For Grooving / Plunging) Pitch (for Threading) O.D./ I.D. (For Threading) Screw Types (for threading) Number of threads (for threading) D (55° Diamond-Shape) Steel Outer Diameter/Inner Diameter 4 Medium grinding Negative 0.4 ～ 1.2 No-hand - - - - - From: 220,050 VND Days to Ship: Số ngày giao hàng: 6 Day(s) or more
6 Day(s) or more
-
You can add up to 6 items per a category to the compare list.
Turning Insert Diamond 55°, Negative, with Hole, DNMG11○○HQ "for Finishing"
KYOCERA
[Specifications]· Shape: D (55° Diamond)· Number of Usable Corners: 4· Rake Angle: Negative· Handedness: No Handedness[Applications]· Machining Applications: For O.D., I.D.· Breaker Applications: Intermediate Cutting
Shape work material Application Available corners Breaker Use Rake angle Nose R Selfishly Groove Width (For Grooving / Plunging) Pitch (for Threading) O.D./ I.D. (For Threading) Screw Types (for threading) Number of threads (for threading) D (55° Diamond-Shape) Steel / Stainless Steel / Cast Iron Outer Diameter/Inner Diameter 4 Medium grinding Negative 0.2 ～ 0.4 No-hand - - - - - From: 148,150 VND Days to Ship: Số ngày giao hàng: 6 Day(s) or more
6 Day(s) or more
-
You can add up to 6 items per a category to the compare list.
KYOCERA
[Specifications]· Shape: D (55° Rhombus)· Number of Available Corners: 4· Rake Angle: Negative· Handedness: No handedness[Applications]· Machining Applications: For Outer Diameter / Inner Diameter· Breaker Application: Medium Cutting
Shape work material Application Available corners Breaker Use Rake angle Nose R Selfishly Groove Width (For Grooving / Plunging) Pitch (for Threading) O.D./ I.D. (For Threading) Screw Types (for threading) Number of threads (for threading) D (55° Diamond-Shape) Steel / Stainless Steel / Cast Iron Outer Diameter/Inner Diameter 4 Medium grinding Negative 0.4 ～ 1.2 No-hand - - - - - From: 212,850 VND Days to Ship: Số ngày giao hàng: 6 Day(s) or more
6 Day(s) or more
-
You can add up to 6 items per a category to the compare list.
KYOCERA
[Specifications]· Shape: D (55° Rhombus)· Number of Available Corners: 4· Rake Angle: Negative· Handedness: No handedness[Applications]· Machining Applications: For Outer Diameter / Inner Diameter· Breaker Application: Medium Cutting
Shape work material Application Available corners Breaker Use Rake angle Nose R Selfishly Groove Width (For Grooving / Plunging) Pitch (for Threading) O.D./ I.D. (For Threading) Screw Types (for threading) Number of threads (for threading) D (55° Diamond-Shape) Steel Outer Diameter/Inner Diameter 4 Medium grinding Negative 0.8 ～ 1.2 No-hand - - - - - From: 220,719 VND Days to Ship: Số ngày giao hàng: 8 Day(s) or more
8 Day(s) or more
-
You can add up to 6 items per a category to the compare list.
Turning Insert Diamond 55°, Negative, with Hole, DNMG15○○TN-V "for Intermediate Cutting"
KYOCERA
[Specifications]· Shape: D (55° Rhombus)· Number of Available Corners: 4· Rake Angle: Negative· Handedness: No handedness[Applications]· Machining Applications: For Outer Diameter / Inner Diameter· Breaker Application: Medium Cutting
Shape work material Application Available corners Breaker Use Rake angle Nose R Selfishly Groove Width (For Grooving / Plunging) Pitch (for Threading) O.D./ I.D. (For Threading) Screw Types (for threading) Number of threads (for threading) D (55° Diamond-Shape) Steel / Stainless Steel / Cast Iron Outer Diameter/Inner Diameter 4 Medium grinding Negative 0.4 ～ 0.8 No-hand - - - - - From: 212,850 VND Days to Ship: Số ngày giao hàng: 9 Day(s) or more
9 Day(s) or more
| BrandNhãn hiệu |
|---|
| Product SeriesDòng sản phẩm |
| From |
| Days to ShipSố ngày giao hàng |
| Shape |
| work material |
| Application |
| Available corners |
| Breaker Use |
| Rake angle |
| Nose R |
| Selfishly |
| Groove Width (For Grooving / Plunging) |
| Pitch (for Threading) |
| O.D./ I.D. (For Threading) |
| Screw Types (for threading) |
| Number of threads (for threading) |
You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.          | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list. | You can add up to 6 items per a category to the compare list. | You can add up to 6 items per a category to the compare list. | You can add up to 6 items per a category to the compare list. | You can add up to 6 items per a category to the compare list. | You can add up to 6 items per a category to the compare list. | |
| BrandNhãn hiệu | SUMITOMO ELECTRIC HARDMETAL | SUMITOMO ELECTRIC HARDMETAL | SUMITOMO ELECTRIC HARDMETAL | SUMITOMO ELECTRIC HARDMETAL | SUMITOMO ELECTRIC HARDMETAL | SUMITOMO ELECTRIC HARDMETAL | SUMITOMO ELECTRIC HARDMETAL | SUMITOMO ELECTRIC HARDMETAL | SUMITOMO ELECTRIC HARDMETAL | SUMITOMO ELECTRIC HARDMETAL | SUMITOMO ELECTRIC HARDMETAL | SUMITOMO ELECTRIC HARDMETAL | SUMITOMO ELECTRIC HARDMETAL | SUMITOMO ELECTRIC HARDMETAL | SUMITOMO ELECTRIC HARDMETAL | SUMITOMO ELECTRIC HARDMETAL | SUMITOMO ELECTRIC HARDMETAL | SUMITOMO ELECTRIC HARDMETAL | SUMITOMO ELECTRIC HARDMETAL | SUMITOMO ELECTRIC HARDMETAL | SUMITOMO ELECTRIC HARDMETAL | SUMITOMO ELECTRIC HARDMETAL | SUMITOMO ELECTRIC HARDMETAL | SUMITOMO ELECTRIC HARDMETAL | SUMITOMO ELECTRIC HARDMETAL | SUMITOMO ELECTRIC HARDMETAL | SUMITOMO ELECTRIC HARDMETAL | SUMITOMO ELECTRIC HARDMETAL | SUMITOMO ELECTRIC HARDMETAL | SUMITOMO ELECTRIC HARDMETAL | SUMITOMO ELECTRIC HARDMETAL | SUMITOMO ELECTRIC HARDMETAL | SUMITOMO ELECTRIC HARDMETAL | SUMITOMO ELECTRIC HARDMETAL | SUMITOMO ELECTRIC HARDMETAL | ISCAR | KYOCERA | SANDVIK | KYOCERA | KYOCERA | KYOCERA | KYOCERA | KYOCERA | KYOCERA | KYOCERA |
| Product SeriesDòng sản phẩm | 55° Diamond-Shape With Hole, Positive 7°, DCMT-LU, For Finishing To Light Cutting | 55° Diamond-Shape With Hole, Positive 7°, DCMT-MU, For Light To Medium Cutting | 55° Diamond-Shape With Hole, 55°, Positive 7°, DCMT-SU, For Light To Medium Cutting | 55° Diamond-Shape With Hole, Negative, DNMG-EF, For Finish Cutting | 55° Diamond-Shape With Hole, Negative, DNMG-GE, For Medium Cutting | 55° Diamond-Shape With Hole, Negative, DNMG-GU, For Medium Cutting | 55° Diamond-Shape With Hole, Negative, DNMG-ME, For Medium To Rough Cutting | 55° Diamond-Shape With Hole, Negative, DNMG-MU, For Medium To Rough Cutting | 55° Diamond-Shape With Hole, Negative, DNMG-MX, For Medium To Rough Cutting | 55° Diamond-Shape With Hole, Negative, DNMG-SE, For Finish Cutting | 55° Diamond-Shape With Hole, Negative, DNMG-SU, For Finish Cutting | 55° Diamond-Shape With Hole, Negative, DNMG-SX, For Light To Medium Cutting | 55° Diamond-Shape With Hole, Negative, DNMG-UG, For Medium Cutting | 55° Diamond-Shape With Hole, Negative, DNMG-UX, For Medium Cutting | 55° Diamond-Shape With Hole, Negative, DNMG-HM, For Medium To Rough Cutting | 55° Diamond-Shape With Hole, Negative, DNMM-HP, For Heavy Cutting | 55° Diamond-Shape With Hole And Wiper Edge, Negative, DNMX-SEW, For Finish Cutting | Turning Insert Diamond 55°, Negative, with Hole, DNMG15○○PP "for Finishing" | Turning Insert Diamond 55°, Negative, with Hole, DNMG11○○GP "for Finishing" | Turning Insert Diamond 55°, Negative, with Hole, DNMG15○○PQ "for Finishing to Intermediate Cutting" | Turning Insert Diamond 55°, Negative, with Hole, DNMG11○○HQ "for Finishing" | Turning Insert Diamond 55°, Negative, with Hole, DNMG15○○TN-V "for Intermediate Cutting" | |||||||||||||||||||||||
| From | 406,350 VND | 350,418 VND | 315,931 VND | 350,418 VND | 353,605 VND | 136,470 VND | 136,470 VND | 180,295 VND | 180,295 VND | 214,479 VND | 160,523 VND | 297,826 VND | 297,826 VND | 234,478 VND | 234,478 VND | 194,658 VND | 215,355 VND | 215,355 VND | 194,658 VND | 175,867 VND | 234,478 VND | 197,823 VND | 230,193 VND | 208,719 VND | 230,193 VND | 194,658 VND | 194,658 VND | 208,719 VND | 194,658 VND | 191,604 VND | 194,658 VND | 208,719 VND | 208,719 VND | 308,602 VND | 194,658 VND | 177,101 VND | 826,418 VND | 405,262 VND | 220,050 VND | 148,150 VND | 220,050 VND | 148,150 VND | 212,850 VND | 220,719 VND | 212,850 VND |
| Days to ShipSố ngày giao hàng | 9 Day(s) | 6 Day(s) or more | 6 Day(s) or more | 6 Day(s) or more | 6 Day(s) or more | 9 Day(s) | 6 Day(s) or more | 6 Day(s) or more | 6 Day(s) or more | 6 Day(s) or more | 6 Day(s) or more | 6 Day(s) or more | 6 Day(s) or more | 6 Day(s) or more | 6 Day(s) or more | 6 Day(s) or more | 6 Day(s) or more | 6 Day(s) or more | 6 Day(s) or more | 6 Day(s) or more | 6 Day(s) or more | 6 Day(s) or more | 6 Day(s) or more | 6 Day(s) or more | 6 Day(s) or more | 6 Day(s) or more | 6 Day(s) or more | 6 Day(s) or more | 6 Day(s) or more | 6 Day(s) or more | 6 Day(s) or more | 6 Day(s) or more | 6 Day(s) or more | 6 Day(s) or more | 6 Day(s) or more | 7 Day(s) or more | 6 Day(s) or more | 6 Day(s) or more | 6 Day(s) or more | 8 Day(s) or more | 6 Day(s) or more | 6 Day(s) or more | 6 Day(s) or more | 8 Day(s) or more | 9 Day(s) or more |
| Shape | D (55° Diamond-Shape) | D (55° Diamond-Shape) | D (55° Diamond-Shape) | D (55° Diamond-Shape) | D (55° Diamond-Shape) | D (55° Diamond-Shape) | D (55° Diamond-Shape) | D (55° Diamond-Shape) | D (55° Diamond-Shape) | D (55° Diamond-Shape) | D (55° Diamond-Shape) | D (55° Diamond-Shape) | D (55° Diamond-Shape) | D (55° Diamond-Shape) | D (55° Diamond-Shape) | D (55° Diamond-Shape) | D (55° Diamond-Shape) | D (55° Diamond-Shape) | D (55° Diamond-Shape) | D (55° Diamond-Shape) | D (55° Diamond-Shape) | D (55° Diamond-Shape) | D (55° Diamond-Shape) | D (55° Diamond-Shape) | D (55° Diamond-Shape) | D (55° Diamond-Shape) | D (55° Diamond-Shape) | D (55° Diamond-Shape) | D (55° Diamond-Shape) | D (55° Diamond-Shape) | D (55° Diamond-Shape) | D (55° Diamond-Shape) | D (55° Diamond-Shape) | D (55° Diamond-Shape) | D (55° Diamond-Shape) | D (55° Diamond-Shape) | D (55° Diamond-Shape) | D (55° Diamond-Shape) | D (55° Diamond-Shape) | D (55° Diamond-Shape) | D (55° Diamond-Shape) | D (55° Diamond-Shape) | D (55° Diamond-Shape) | D (55° Diamond-Shape) | D (55° Diamond-Shape) |
| work material | Steel / Stainless Steel / Cast Iron / Non-ferrous metal | Steel / Stainless Steel / Cast Iron / Non-ferrous metal / Heat-resistant alloy, titanium alloy | Cast Iron | Steel / Stainless Steel / Cast Iron / Non-ferrous metal / Heat-resistant alloy, titanium alloy | Steel / Stainless Steel / Cast Iron / Non-ferrous metal | Steel / Stainless Steel / Cast Iron / Non-ferrous metal | Steel / Stainless Steel / Cast Iron / Non-ferrous metal / Heat-resistant alloy, titanium alloy | Steel / Stainless Steel / Cast Iron / Non-ferrous metal | Steel / Stainless Steel / Cast Iron / Non-ferrous metal / Heat-resistant alloy, titanium alloy | Steel / Stainless Steel / Cast Iron | Steel / Stainless Steel / Cast Iron / Non-ferrous metal / Heat-resistant alloy, titanium alloy | Steel / Stainless Steel / Cast Iron / Non-ferrous metal / Heat-resistant alloy, titanium alloy | Steel / Stainless Steel / Cast Iron / Non-ferrous metal | Steel / Stainless Steel / Cast Iron | Steel / Stainless Steel / Cast Iron / Non-ferrous metal | Steel / Stainless Steel / Cast Iron / Non-ferrous metal / Heat-resistant alloy, titanium alloy | Steel / Stainless Steel / Cast Iron / Non-ferrous metal | Steel / Stainless Steel / Cast Iron / Non-ferrous metal | Steel / Stainless Steel / Cast Iron | Steel / Stainless Steel / Cast Iron / Non-ferrous metal / Heat-resistant alloy, titanium alloy | Steel / Cast Iron | Steel / Stainless Steel / Cast Iron / Non-ferrous metal / Heat-resistant alloy, titanium alloy | Steel / Stainless Steel / Cast Iron | Steel / Stainless Steel / Cast Iron / Heat-resistant alloy, titanium alloy | Steel / Stainless Steel / Cast Iron | Steel / Stainless Steel / Cast Iron / Non-ferrous metal | Steel / Stainless Steel / Cast Iron / Non-ferrous metal / Heat-resistant alloy, titanium alloy | Steel / Stainless Steel / Cast Iron / Non-ferrous metal | Steel / Stainless Steel / Cast Iron | Steel / Stainless Steel / Cast Iron / Non-ferrous metal / Heat-resistant alloy, titanium alloy | Steel / Stainless Steel / Cast Iron | Steel / Stainless Steel / Cast Iron | Steel / Stainless Steel / Cast Iron / Non-ferrous metal | Steel / Stainless Steel / Cast Iron | Steel / Stainless Steel / Cast Iron / Non-ferrous metal | Steel / Stainless Steel / Non-ferrous metal / Heat-resistant alloy, titanium alloy | Cast Iron / High Hardness Material | Cast Iron / Non-ferrous metal / High Hardness Material | Steel | Steel / Stainless Steel / Cast Iron | Steel | Steel / Stainless Steel / Cast Iron | Steel / Stainless Steel / Cast Iron | Steel | Steel / Stainless Steel / Cast Iron |
| Application | Outer Diameter/Inner Diameter | Outer Diameter/Inner Diameter | Outer Diameter/Inner Diameter | Outer Diameter/Inner Diameter | Outer Diameter/Inner Diameter | Outer Diameter/Inner Diameter | Outer Diameter/Inner Diameter | Outer Diameter/Inner Diameter | Outer Diameter/Inner Diameter | Outer Diameter/Inner Diameter | Outer Diameter/Inner Diameter | Outer Diameter/Inner Diameter | Outer Diameter/Inner Diameter | Outer Diameter/Inner Diameter | Outer Diameter/Inner Diameter | Outer Diameter/Inner Diameter | Outer Diameter/Inner Diameter | Outer Diameter/Inner Diameter | Outer Diameter/Inner Diameter | Outer Diameter/Inner Diameter | Outer Diameter/Inner Diameter | Outer Diameter/Inner Diameter | Outer Diameter/Inner Diameter | Outer Diameter/Inner Diameter | Outer Diameter/Inner Diameter | Outer Diameter/Inner Diameter | Outer Diameter/Inner Diameter | Outer Diameter/Inner Diameter | Outer Diameter/Inner Diameter | Outer Diameter/Inner Diameter | Outer Diameter/Inner Diameter | Outer Diameter/Inner Diameter | Outer Diameter/Inner Diameter | Outer Diameter/Inner Diameter | Outer Diameter/Inner Diameter | Outer Diameter/Inner Diameter | Outer Diameter/Inner Diameter | Outer Diameter/Inner Diameter | Outer Diameter/Inner Diameter | Outer Diameter/Inner Diameter | Outer Diameter/Inner Diameter | Outer Diameter/Inner Diameter | Outer Diameter/Inner Diameter | Outer Diameter/Inner Diameter | Outer Diameter/Inner Diameter |
| Available corners | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | 2 | 1 / 2 | 2 | 4 | 4 | 4 | 4 | 4 | 4 | 4 |
| Breaker Use | Finish | - | - | Finish | - | Finish | Finish | Finish | Finish | - | - | Finish / Medium grinding | Medium grinding | - | Medium grinding | Finish | - | - | Medium grinding | Medium grinding | - | Finish | Medium to coarse grinding | Medium to coarse grinding | Medium to coarse grinding | Finish | Finish | - | Medium grinding | - | Medium grinding | Medium to coarse grinding | Medium grinding | Heavy cutting | Finish | Finish | - | - | Finish | Finish | Medium grinding | Medium grinding | Medium grinding | Medium grinding | Medium grinding |
| Rake angle | Pozidriv | Pozidriv | Pozidriv | Pozidriv | Pozidriv | Pozidriv | Pozidriv | Pozidriv | Pozidriv | Pozidriv | Pozidriv | Negative | Negative | Negative | Negative | Negative | Negative | Negative | Negative | Negative | Negative | Negative | Negative | Negative | Negative | Negative | Negative | Negative | Negative | Negative | Negative | Negative | Negative | Negative | Negative | Negative | Pozidriv | Negative | Negative | Negative | Negative | Negative | Negative | Negative | Negative |
| Nose R | 0.2 | 0.2 ～ Other | 0.2 ～ 0.8 | 0.2 ～ Other | 0.4 ～ 0.8 | 0.2 ～ 0.4 | 0.2 ～ 0.8 | 0.8 | 0.2 ～ 0.8 | 0.4 ～ 0.8 | 0.2 ～ 0.8 | 0.2 ～ 0.8 | 0.4 ～ 0.8 | 0.4 ～ 0.8 | 0.4 ～ 0.8 | 0.4 ～ 1.2 | 0.4 ～ 0.8 | 0.4 ～ 1.2 | 0.4 ～ 1.6 | 0.4 ～ 1.6 | 0.4 ～ 1.2 | 0.2 ～ 1.2 | 0.8 ～ 1.6 | 0.8 ～ 1.6 | 0.8 ～ 1.2 | 0.4 ～ 1.2 | 0.2 ～ 1.2 | 0.4 ～ 1.2 | 0.4 ～ 1.6 | 0.4 ～ 1.2 | 0.4 ～ 1.6 | 0.4 ～ 0.8 | 0.4 ～ 0.8 | 0.4 ～ 1.6 | 0.4 ～ 1.2 | 0.4 | 0.2 ～ 1.2 | 0.8 ～ 1.2 | 0.2 ～ 1.2 | 0.4 ～ 0.8 | 0.4 ～ 1.2 | 0.2 ～ 0.4 | 0.4 ～ 1.2 | 0.8 ～ 1.2 | 0.4 ～ 0.8 |
| Selfishly | - | No-hand | No-hand | Right-hand | Right-hand | No-hand | No-hand | No-hand | No-hand | No-hand | No-hand | Left-hand / No-hand | Right-hand | Left-hand | Left-hand | No-hand | No-hand | No-hand | No-hand | No-hand | No-hand | No-hand | No-hand | No-hand | No-hand | No-hand | No-hand | No-hand | No-hand | No-hand | No-hand | Right-hand | Right-hand | No-hand | No-hand | - | No-hand | No-hand | No-hand | No-hand | No-hand | No-hand | No-hand | No-hand | No-hand |
| Groove Width (For Grooving / Plunging) | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - |
| Pitch (for Threading) | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - |
| O.D./ I.D. (For Threading) | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | Outer Diameter | - | - | - | - | - | - | - | - | - |
| Screw Types (for threading) | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - |
| Number of threads (for threading) | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - |
Loading...Tải…
ConfigureTạo
Specification/DimensionsĐặc điểm kỹ thuật / Kích thướcĐặc điểm kỹ thuật / Kích thước
-
Shape
- C (80° Diamond-Shape)
- D (55° Diamond-Shape)
- R (Circular)
- S (Rectangular)
- T (Triangle)
- V (35° Diamond-Shaped)
- W (Hexagonal Type)
- Other
- K (parallel trapezium)
-
work material
- Steel
- Stainless Steel
- Cast Iron
- Non-ferrous metal
- Heat-resistant alloy, titanium alloy
- High Hardness Material
-
Application
- Outer Diameter/Inner Diameter
- Grooving / Parting
- Threading
- Other
-
Available corners
- 1
- 2
- 3
- 4
- 6
- 8
- 9 or more
-
Breaker Use
- Finish
- Medium grinding
- Medium to deep grinding
- Heavy cutting
- Light Cutting
- Rough cutting
- Intermittent
- Medium to coarse grinding
-
Rake angle
- Negative
- Pozidriv
-
Nose R
-
Selfishly
-
Groove Width (For Grooving / Plunging)
-
Pitch (for Threading)
-
O.D./ I.D. (For Threading)
-
Screw Types (for threading)
-
Number of threads (for threading)
How can we improve?
How can we improve?
While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
Customer Privacy Policy
Thank you for your cooperation.
While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
Please use the inquiry form.
Customer Privacy Policy