Ball End Mills (Carbide)（work material：Copper）

• You can add up to 6 items per a category to the compare list. Compare

  

  Ball End Type, 2-Flute WXL-EBD

  OSG

  [Features]· High-accuracy ball end mill coated with WXL hard lubricating film coating. Proven performance on a wide range of work materials. Long life regardless of whether being used for dry-type or wet-type machining.

  R Size(mm)	Blade length (ℓ)(mm)	Underneck length (ℓ1)(mm)	Shank diameter (d)(mm)	Number of flutes(sheet)	Overall Length (L)(mm)	work material	R Precision(μm)	Machining Application	Coating	Type
  0.05 ～ 10	0.2 ～ 38	-	4 ～ 20	2	40 ～ 160	Copper[◎]	-0.007 to 0.003 ～ ±0.01	Curved surface / Side / Engraving / R Groove	For General Steels (AlCrN, etc.)	Ball

  From: 483,333 VND
  Days to Ship: Số ngày giao hàng: 6 Day(s) or more

  6 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  XAC series carbide ball end mill, 2-flute / short model

  MISUMI

  [Features]·General purpose 2-blade ball end mill for wide range of profiling·For surface coarse of workpiece, good surface finish can be expected after machining.·Can be regrinded. Please refer to the page dedicated to "regrinding service" for usage procedures, range of services, prices, etc.

  • Volume Discount

  • TiAlN
  • General Steel
  • 2 Flutes
  • S (Short)

  R Size(mm)	Blade length (ℓ)(mm)	Underneck length (ℓ1)(mm)	Shank diameter (d)(mm)	Number of flutes(sheet)	Overall Length (L)(mm)	work material	R Precision(μm)	Machining Application	Coating	Type
  0.2 ～ 12.5	0.8 ～ 50	-	3 ～ 25	2	40 ～ 180	Copper[○]	±0.01	Curved surface / Side / Engraving / R Groove	TiAlN	Ball

  From: 517,970 VND
  Days to Ship: Số ngày giao hàng: 4 Day(s) or more

  4 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  

  

  TSC series carbide ball end mill, 2-flute / short, long shank model

  MISUMI

  [Features]·Long shank type ideal for deep cavity millingIt has coating with high oxidation resistance and high hardness, and achieves a long service lifespan. Effective in high-speed machining and dry machining as coating properties·Can be regrinded. Please refer to the page dedicated to "regrinding service" for usage procedures, range of services, prices, etc.

  • Volume Discount

  • TS
  • General Steel
  • 2 Flutes
  • S (Short)

  R Size(mm)	Blade length (ℓ)(mm)	Underneck length (ℓ1)(mm)	Shank diameter (d)(mm)	Number of flutes(sheet)	Overall Length (L)(mm)	work material	R Precision(μm)	Machining Application	Coating	Type
  0.5 ～ 12.5	2 ～ 30	15 ～ 80	3 ～ 25	2	70 ～ 280	Copper[○]	-0.007 ~ +0.003 ～ ±0.01	Curved surface / Side / Engraving / R Groove	For High Hardness (Silicon Group)	Ball

  Days to Ship: Số ngày giao hàng: 4 Day(s) or more

  4 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  MSBH230 2-Flute Ball-End Mill for High-Hardness

  NS TOOL

  [Notice] Alterations can now be specified. Please select from "Standard/Alterations Category" of narrowing conditions.[Features]・ Standard type ball end mill for high hardness. Ideal for finish machining・ Supports high hardness materials up to 68 HRC.

  R Size(mm)	Blade length (ℓ)(mm)	Underneck length (ℓ1)(mm)	Shank diameter (d)(mm)	Number of flutes(sheet)	Overall Length (L)(mm)	work material	R Precision(μm)	Machining Application	Coating	Type
  0.05 ～ 6	0.1 ～ 20	-	4 ～ 12	2	50 ～ 100	Copper[○]	0.005～-0.005 ～ 0.01～-0.01	Curved surface / Side / Engraving / R Groove	For High Hardness (Silicon Group)	Ball

  From: 595,863 VND
  Days to Ship: Số ngày giao hàng: 6 Day(s) or more

  6 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  MSB230 MUGEN-COATING 2-Flute Ball End Mill

  NS TOOL

  [Notice] Alterations can now be specified. Please select from "Standard/Alterations Category" of narrowing conditions.[Features]・ Supports precision 3D machining from low speed to high speed.

  R Size(mm)	Blade length (ℓ)(mm)	Underneck length (ℓ1)(mm)	Shank diameter (d)(mm)	Number of flutes(sheet)	Overall Length (L)(mm)	work material	R Precision(μm)	Machining Application	Coating	Type
  0.05 ～ 6	0.1 ～ 20	-	4 ～ 12	2	50 ～ 110	Copper[◎]	0.005～-0.005 ～ 0.01～-0.01	Curved surface / R Groove	TiAlN	Ball

  From: 569,109 VND
  Days to Ship: Số ngày giao hàng: 6 Day(s) or more

  6 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  TSC series carbide ball end mill, regular model

  MISUMI

  [Features]·Regular bridge length allows for many regrinding times·Can be regrinded. Please refer to the page dedicated to "regrinding service" for usage procedures, range of services, prices, etc.

  • Volume Discount

  • TS
  • General Steel
  • 2 Flutes
  • R (Regular)

  R Size(mm)	Blade length (ℓ)(mm)	Underneck length (ℓ1)(mm)	Shank diameter (d)(mm)	Number of flutes(sheet)	Overall Length (L)(mm)	work material	R Precision(μm)	Machining Application	Coating	Type
  0.2 ～ 8	1.5 ～ 30	17 ～ 80	4 ～ 16	2	50 ～ 140	Copper[○]	-0.007 ~ +0.003 ～ ±0.01	Curved surface / Side / Engraving / R Groove	For High Hardness (Silicon Group)	Ball

  Days to Ship: Số ngày giao hàng: 4 Day(s) or more

  4 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  MSBH345 3-Flute Ball-End Mill for High-Hardness

  NS TOOL

  [Notice] Alterations can now be specified. Please select from "Standard/Alterations Category" of narrowing conditions.[Features]・ The MUGEN Coating Premium for high hardness and the unique new shape give the tool excellent chipping resistance, and reduced chattering improves the finished surface.・ Achieves stable and long lifespan with long-time machining in high hardness range (48 to 65 HRC). In pursuit of the cutting diameter shape, the manufacturer improved the amount of tilt and machining precision.・ High efficiency machining with less chattering is possible by adopting unique 3-flute shape and unequal division.

  R Size(mm)	Blade length (ℓ)(mm)	Underneck length (ℓ1)(mm)	Shank diameter (d)(mm)	Number of flutes(sheet)	Overall Length (L)(mm)	work material	R Precision(μm)	Machining Application	Coating	Type
  0.5 ～ 3	1.5 ～ 10	-	6	3	60 ～ 80	Copper[○]	0.01～-0.01	Curved surface / Side / Engraving / R Groove	For High Hardness (Silicon Group)	Ball

  From: 1,697,886 VND
  Days to Ship: Số ngày giao hàng: 6 Day(s) or more

  6 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  MSB230G2 MUGEN-COATING High Precision Profit Ball End Mill

  NS TOOL

  The tuned Infinity coating sustains high precision machining for a long time

  R Size(mm)	Blade length (ℓ)(mm)	Underneck length (ℓ1)(mm)	Shank diameter (d)(mm)	Number of flutes(sheet)	Overall Length (L)(mm)	work material	R Precision(μm)	Machining Application	Coating	Type
  0.05 ～ 3	0.1 ～ 10	-	4 ～ 6	2	50 ～ 80	Copper[◎]	0.002～-0.002	Curved surface / Side / Engraving / R Groove	TiAlN	Ball

  From: 1,083,728 VND
  Days to Ship: Số ngày giao hàng: 6 Day(s) or more

  6 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Ball End Type, 2-Flute MG-EBD-3

  OSG

  Uses high-toughness carbide with high transverse rupture strength.Shank diameter (mm) 3, overall length (mm) 40, helix angle: standard helix (30 to 44°)

  R Size(mm)	Blade length (ℓ)(mm)	Underneck length (ℓ1)(mm)	Shank diameter (d)(mm)	Number of flutes(sheet)	Overall Length (L)(mm)	work material	R Precision(μm)	Machining Application	Coating	Type
  0.05 ～ 1.5	0.2 ～ 8	-	3	2	40	Copper[○]	-	Curved surface / Side / Engraving / R Groove	Non-Coated	Ball

  From: 1,773,426 VND
  Days to Ship: Số ngày giao hàng: 6 Day(s) or more

  6 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  2-Flute Ball End Mill (GS-EBD)

  OSG KOREA CORP

  R Size(mm)	Blade length (ℓ)(mm)	Underneck length (ℓ1)(mm)	Shank diameter (d)(mm)	Number of flutes(sheet)	Overall Length (L)(mm)	work material	R Precision(μm)	Machining Application	Coating	Type
  0.05 ～ 12.5	0.2 ～ 50	-	4 ～ 25	2	40 ～ 180	Copper[○]	-	Curved surface / Side / Engraving / R Groove	FX	Ball

  From: 752,214 VND
  Days to Ship: Số ngày giao hàng: 4 Day(s) or more

  4 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  

  XAL series carbide ball end mill, 2-flute / short model

  MISUMI

  XAL Series is the definitive choice for cost-sensitive customers

  • Volume Discount

  • XAL
  • General Steel
  • 2 Flutes

  R Size(mm)	Blade length (ℓ)(mm)	Underneck length (ℓ1)(mm)	Shank diameter (d)(mm)	Number of flutes(sheet)	Overall Length (L)(mm)	work material	R Precision(μm)	Machining Application	Coating	Type
  0.05 ～ 10	0.2 ～ 38	-	3 ～ 20	2	40 ～ 160	Copper[○/◎]	-0.007 ~ +0.003 ～ ±0.01	Curved surface / Side / Engraving / R Groove	For General Steels (AlCrN, etc.)	Ball

  From: 328,423 VND
  Special Price
  Days to Ship: Số ngày giao hàng: Same day or more

  Same day or more

• You can add up to 6 items per a category to the compare list. Compare

  

  TSC series carbide ball end mill, 4-flute / regular model

  MISUMI

  [Features]·Surface coarse of workpiece after processing is very good finish.·It has coating with high oxidation resistance and high hardness, and achieves a long service lifespan. As coating characteristic, it is effective in high-speed machining and dry machining.·Can be regrinded. Please refer to the page dedicated to "regrinding service" for usage procedures, range of services, prices, etc.

  • Volume Discount

  • TS
  • General Steel
  • 4 Flutes
  • R (Regular)

  R Size(mm)	Blade length (ℓ)(mm)	Underneck length (ℓ1)(mm)	Shank diameter (d)(mm)	Number of flutes(sheet)	Overall Length (L)(mm)	work material	R Precision(μm)	Machining Application	Coating	Type
  1.5 ～ 6	5 ～ 22	17 ～ 72	6 ～ 12	4	60 ～ 110	Copper[○]	±0.01	Curved surface / Side / Engraving / R Groove	For High Hardness (Silicon Group)	Ball

  Days to Ship: Số ngày giao hàng: 4 Day(s) or more

  4 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Ball End Type, 2-Flute CRN-EBD-3

  OSG

  A small diameter ball end mill series with a CrN coating for excellent lubricity. Ideal for fine processing of copper electrodes and IT parts.

  R Size(mm)	Blade length (ℓ)(mm)	Underneck length (ℓ1)(mm)	Shank diameter (d)(mm)	Number of flutes(sheet)	Overall Length (L)(mm)	work material	R Precision(μm)	Machining Application	Coating	Type
  0.1 ～ 1.5	0.4 ～ 8	-	3	2	40	Copper[◎]	-0.01～+0.01	Curved surface / Side / Engraving / R Groove	CrN	Ball

  From: 1,913,688 VND
  Days to Ship: Số ngày giao hàng: 6 Day(s) or more

  6 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Ball End Type, 2-Flute CRN-HS-EBD

  OSG

  Achieving high-speed and high-precision machining by combining shrink and HSKWork Material: Aluminum/Copper/ResinFor coating non-ferrous metals (CrN)Standard/Alteration category: Manufacturer's standard productNumber of flutes (pcs.) 2Helix angle: Standard helix (30 to 44°), R accuracy (µm) ±10

  R Size(mm)	Blade length (ℓ)(mm)	Underneck length (ℓ1)(mm)	Shank diameter (d)(mm)	Number of flutes(sheet)	Overall Length (L)(mm)	work material	R Precision(μm)	Machining Application	Coating	Type
  0.5 ～ 6	1 ～ 12	-	6 ～ 12	2	50 ～ 80	Copper[◎]	-0.01～+0.01	Curved surface / Side / Engraving / R Groove	CrN	Ball

  From: 2,407,650 VND
  Days to Ship: Số ngày giao hàng: 6 Day(s) or more

  6 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Carbide Graphite Solid Ball End Mill 2-Flute, Long Type

  EIKOSHA

  Graphite Electrode Milling, Long Handle

  R Size(mm)	Blade length (ℓ)(mm)	Underneck length (ℓ1)(mm)	Shank diameter (d)(mm)	Number of flutes(sheet)	Overall Length (L)(mm)	work material	R Precision(μm)	Machining Application	Coating	Type
  1 ～ 15	20 ～ 80	-	4 ～ 25	2	120 ～ 250	Copper[◎]	±0.02	Curved surface / Side / Engraving / R Groove	-	Ball

  From: 3,530,919 VND
  Days to Ship: Số ngày giao hàng: 6 Day(s) or more

  6 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  TSC series carbide ball end mill (R accuracy ±3μm)

  MISUMI

  [Features]·Radius tolerance within 6 µm (compared to the manufacturer measurement), shank diameter tolerance h5 standard adopted. Optimal for high precision 3D machining of molds with high-quality tools with little variation in quality·Seamless shape (sharpening from outer edge to center of rounded blade in 1 process) is designed to create smooth cutting edge flank with no steps

  • Volume Discount

  • TS
  • General Steel
  • 2 Flutes
  • S (Short)

  R Size(mm)	Blade length (ℓ)(mm)	Underneck length (ℓ1)(mm)	Shank diameter (d)(mm)	Number of flutes(sheet)	Overall Length (L)(mm)	work material	R Precision(μm)	Machining Application	Coating	Type
  1.5 ～ 3	4.5 ～ 9	-	6	2	60 ～ 90	Copper[○]	-0.005 ~ +0.001 ～ ±0.003	Curved surface / Side / Engraving / R Groove	For High Hardness (Silicon Group)	Ball

  From: 1,240,084 VND
  Days to Ship: Số ngày giao hàng: 4 Day(s) or more

  4 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  TSC series carbide ball end mill, for shrinkage fitting, 2-flute / stub model

  MISUMI

  [Features]·Compatible with shrink fit chucks for high-precision machining·Designed with short flute length and overall length for shrink fit and emphasis on rigidityIt has coating with high oxidation resistance and high hardness, and achieves a long service lifespan. Effective in high-speed machining and dry machining as coating properties

  • Volume Discount

  • TS
  • General Steel
  • 2 Flutes
  • B (Stub)

  R Size(mm)	Blade length (ℓ)(mm)	Underneck length (ℓ1)(mm)	Shank diameter (d)(mm)	Number of flutes(sheet)	Overall Length (L)(mm)	work material	R Precision(μm)	Machining Application	Coating	Type
  0.2 ～ 6	0.4 ～ 12	-	4 ～ 12	2	40 ～ 65	Copper[○]	-0.007 ~ +0.003 ～ ±0.005	Curved surface / Side / Engraving / R Groove	For High Hardness (Silicon Group)	Ball

  From: 531,732 VND
  Days to Ship: Số ngày giao hàng: 4 Day(s) or more

  4 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  XAC series carbide ball end mill, 2-flute / short, long shank model

  MISUMI

  [Features]·Ideal for high accuracy 3D machining of molds due to high tool rigidity and excellent chip removal capability·For surface coarse of workpiece, good surface finish can be expected after machining.·Long shank type, ideal for deep cavity milling·Can be regrinded. Please refer to the page dedicated to "regrinding service" for usage procedures, range of services, prices, etc.

  • Volume Discount

  • TiAlN
  • General Steel
  • 2 Flutes

  R Size(mm)	Blade length (ℓ)(mm)	Underneck length (ℓ1)(mm)	Shank diameter (d)(mm)	Number of flutes(sheet)	Overall Length (L)(mm)	work material	R Precision(μm)	Machining Application	Coating	Type
  2 ～ 8	8 ～ 30	-	4 ～ 16	2	100 ～ 250	Copper[○]	±0.01	Curved surface / Side / Engraving / R Groove	TiAlN	Ball

  From: 996,240 VND
  Days to Ship: Số ngày giao hàng: 4 Day(s) or more

  4 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Carbide Ball End Mill for Aluminum Machining, 2-Flute / Short Model

  MISUMI

  A type for aluminum that achieves high efficiency while having the affordable uncoated design

  • Volume Discount

  • Non-Coated
  • Aluminum
  • 2 Flutes
  • S (Short)

  R Size(mm)	Blade length (ℓ)(mm)	Underneck length (ℓ1)(mm)	Shank diameter (d)(mm)	Number of flutes(sheet)	Overall Length (L)(mm)	work material	R Precision(μm)	Machining Application	Coating	Type
  0.5 ～ 6	1.5 ～ 18	14 ～ 68	4 ～ 12	2	50 ～ 110	Copper[○]	±0.01	Curved surface / Side / Engraving / R Groove	Non-Coated	Ball

  Days to Ship: Số ngày giao hàng: 4 Day(s) or more

  4 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Diamond Coated Carbide Ball End Mill for Graphite Machining, 4-Flute / Short Model

  MISUMI

  4-flute ball for graphite that achieves high feed

  • Volume Discount

  • DIA
  • Graphite
  • 4 Flutes
  • S (Short)

  R Size(mm)	Blade length (ℓ)(mm)	Underneck length (ℓ1)(mm)	Shank diameter (d)(mm)	Number of flutes(sheet)	Overall Length (L)(mm)	work material	R Precision(μm)	Machining Application	Coating	Type
  1 ～ 6	4 ～ 24	-	6 ～ 12	4	50 ～ 80	Copper[○]	±0.01	Curved surface / Side / Engraving / R Groove	Dia Coat	Ball

  From: 2,671,593 VND
  Days to Ship: Số ngày giao hàng: 4 Day(s) or more

  4 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  XAL Series Carbide Ball End Mill, 2-Flute / Regular Model

  MISUMI

  The regular flute length type is introduced in the low-price and popular XAL balls

  • Volume Discount

  • XAL
  • General Steel
  • 2 Flutes

  R Size(mm)	Blade length (ℓ)(mm)	Underneck length (ℓ1)(mm)	Shank diameter (d)(mm)	Number of flutes(sheet)	Overall Length (L)(mm)	work material	R Precision(μm)	Machining Application	Coating	Type
  0.2 ～ 8	1.5 ～ 48	-	4 ～ 16	2	50 ～ 140	Copper[◎]	-0.007 ~ +0.003 ～ ±0.01	Curved surface / Side / Engraving / R Groove	For General Steels (AlCrN, etc.)	Ball

  Days to Ship: Số ngày giao hàng: Same day or more

  Same day or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Ball End Type, 2-Flute FX-MG-EBD-3

  OSG

  A wide range of machining is possible with the adoption of FX coating and high-toughness carbide material.Coated for steelStandard/Alteration category: Manufacturer's standard productNumber of flutes (pcs.) 2Shank diameter (mm) 3, overall length (mm) 40, helix angle: standard helix (30 to 44°)R Accuracy (µm) ±10

  R Size(mm)	Blade length (ℓ)(mm)	Underneck length (ℓ1)(mm)	Shank diameter (d)(mm)	Number of flutes(sheet)	Overall Length (L)(mm)	work material	R Precision(μm)	Machining Application	Coating	Type
  0.2 ～ 1.5	0.8 ～ 8	-	3	2	40	Copper[○]	-0.01～+0.01	Curved surface / Side / Engraving / R Groove	TiAlN	Ball

  From: 2,320,897 VND
  Days to Ship: Số ngày giao hàng: 6 Day(s) or more

  6 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Ball End Type, 2-Flute WX-EBD

  OSG

  A general-purpose ball end mill that can be used for a wide range of work materials and machining. Enables stable continuous processing for many hours thanks to high toughness carbide being used as its base material.

  R Size(mm)	Blade length (ℓ)(mm)	Underneck length (ℓ1)(mm)	Shank diameter (d)(mm)	Number of flutes(sheet)	Overall Length (L)(mm)	work material	R Precision(μm)	Machining Application	Coating	Type
  0.6	3	-	4	2	50	Copper[○]	-0.01～+0.01	Curved surface / Side / Engraving / R Groove	TiAlN	Ball

  From: 900,582 VND
  Days to Ship: Số ngày giao hàng: 6 Day(s) or more

  6 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  MSB345 3-Flute Ball-End Mill

  NS TOOL

  [Notice] Alterations can now be specified. Please select from "standard / machining category" of narrowing condition.[Features]・ High efficiency machining with less chattering is possible by adopting unique 3-flute shape and unequal division.

  R Size(mm)	Blade length (ℓ)(mm)	Underneck length (ℓ1)(mm)	Shank diameter (d)(mm)	Number of flutes(sheet)	Overall Length (L)(mm)	work material	R Precision(μm)	Machining Application	Coating	Type
  0.5 ～ 6	1.5 ～ 20	-	6 ～ 12	3	60 ～ 120	Copper[◎]	0.01～-0.01	Curved surface / Side / Engraving / R Groove	TiAlN	Ball

  From: 1,264,316 VND
  Days to Ship: Số ngày giao hàng: 6 Day(s) or more

  6 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  One Cut Ball (Slim Shank) DZ-OCUB

  DIJET

  Ultrafine particle carbide alloy with excellent wear resistance ensures long tool life.

  R Size(mm)	Blade length (ℓ)(mm)	Underneck length (ℓ1)(mm)	Shank diameter (d)(mm)	Number of flutes(sheet)	Overall Length (L)(mm)	work material	R Precision(μm)	Machining Application	Coating	Type
  3 ～ 10	9 ～ 30	-	5 ～ 18	2	120 ～ 180	Copper[○]	10～-10	Curved surface / R Groove	TiAlN	Ball

  From: 1,666,068 VND
  Days to Ship: Số ngày giao hàng: 6 Day(s) or more

  6 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Carbide 2-Flute Short Ball End Mill 30° B222X

  7 LEADERS

  [Features]· 2-flute short ball end mill that supports a wide range of work materials.· Capable of continuous stable cutting.· Nanoparticle multilayer coating.· Excellent lubricity and abrasion resistance.· Exhibits its strength in general cutting processes.

  R Size(mm)	Blade length (ℓ)(mm)	Underneck length (ℓ1)(mm)	Shank diameter (d)(mm)	Number of flutes(sheet)	Overall Length (L)(mm)	work material	R Precision(μm)	Machining Application	Coating	Type
  0.15 ～ 10	0.6 ～ 38	-	4 ～ 20	2	50 ～ 100	Copper[○]	±10	Curved surface / Engraving / R Groove	-	Ball

  From: 485,035 VND
  Days to Ship: Số ngày giao hàng: 8 Day(s) or more

  8 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  NSB-2 Ball End Mill

  NS TOOL

  [Notice] Alterations can now be specified. Please select from "Standard/Alterations Category" of narrowing conditions.[Features]・ Ball end mill suitable for carbon steel and heat-treated steel.

  R Size(mm)	Blade length (ℓ)(mm)	Underneck length (ℓ1)(mm)	Shank diameter (d)(mm)	Number of flutes(sheet)	Overall Length (L)(mm)	work material	R Precision(μm)	Machining Application	Coating	Type
  1 ～ 5.5	3 ～ 15	-	-	2	-	Copper[◎]	-0.02 to 0.02 ～ -0.01 to 0.01	Curved surface	Non-Coated	Ball

  From: 1,330,238 VND
  Days to Ship: Số ngày giao hàng: 6 Day(s) or more

  6 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  TSC series carbide ball end mill (for shrink fit holder / R accuracy ±3 μm) 2-flute / stub model

  MISUMI

  [Features]·Designed with optimum blade length, shank length and overall length considering processing using shrink fit holder·Radius tolerance within 6 µm (compared to the manufacturer measurement), shank diameter tolerance h5 standard adopted. High precision tools with little quality variation are ideal for high precision 3D machining of molds·Seamless shape (sharpening from outer edge to center of rounded blade in 1 process) is designed to create smooth cutting edge flank with no steps

  • Volume Discount

  • TS
  • General Steel
  • 2 Flutes
  • B (Stub)

  R Size(mm)	Blade length (ℓ)(mm)	Underneck length (ℓ1)(mm)	Shank diameter (d)(mm)	Number of flutes(sheet)	Overall Length (L)(mm)	work material	R Precision(μm)	Machining Application	Coating	Type
  0.3 ～ 2	0.6 ～ 4	-	6	2	40	Copper[○]	±0.003	Curved surface / Side / Engraving / R Groove	For High Hardness (Silicon Group)	Ball

  From: 1,362,905 VND
  Days to Ship: Số ngày giao hàng: 4 Day(s) or more

  4 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  TSC Series Carbide Ball End Mill 2-Flute / Short Type

  MISUMI

  [Features]·Good finish can be expected for surface coarse of workpiece after processingIt has coating with high oxidation resistance and high hardness, and achieves a long service lifespan. Effective in high-speed machining and dry machining as coating properties·Can be regrinded. Please refer to the page dedicated to "regrinding service" for usage procedures, range of services, prices, etc.

  • Volume Discount

  • TS
  • General Steel
  • 2 Flutes
  • S (Short)

  R Size(mm)	Blade length (ℓ)(mm)	Underneck length (ℓ1)(mm)	Shank diameter (d)(mm)	Number of flutes(sheet)	Overall Length (L)(mm)	work material	R Precision(μm)	Machining Application	Coating	Type
  0.05 ～ 10	0.2 ～ 25	15 ～ 75	3 ～ 20	2	40 ～ 150	Copper[○]	-0.007 ~ +0.003 ～ ±0.01	Curved surface / Side / Engraving / R Groove	For High Hardness (Silicon Group)	Ball

  Days to Ship: Số ngày giao hàng: Same day or more

  Same day or more

• You can add up to 6 items per a category to the compare list. Compare

  

  TSC series carbide ball end mill, 3-flute / short model

  MISUMI

  [Features]·3-flute shape is resistant to chattering and enables high feed·Surface coarse of workpiece after processing is very good finish.·It has coating with high oxidation resistance and high hardness, and achieves a long service lifespan. Effective in high-speed machining and dry machining as coating properties·Can be regrinded. Please refer to the page dedicated to "regrinding service" for usage procedures, range of services, prices, etc.

  • Volume Discount

  • TS
  • General Steel
  • 3 Flutes
  • S (Short)

  R Size(mm)	Blade length (ℓ)(mm)	Underneck length (ℓ1)(mm)	Shank diameter (d)(mm)	Number of flutes(sheet)	Overall Length (L)(mm)	work material	R Precision(μm)	Machining Application	Coating	Type
  0.5 ～ 10	2 ～ 25	15 ～ 75	6 ～ 20	3	50 ～ 150	Copper[○]	±0.01	Curved surface / Side / Engraving / R Groove	For High Hardness (Silicon Group)	Ball

  Days to Ship: Số ngày giao hàng: 4 Day(s) or more

  4 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  TSC series carbide ball end mill, 3-flute / regular model

  MISUMI

  [Features]·3-flute shape is resistant to chattering and enables high feed·It has coating with high oxidation resistance and high hardness, and achieves a long service lifespan. Effective in high-speed machining and dry machining as coating properties·Can be regrinded. Please refer to the page dedicated to "regrinding service" for usage procedures, range of services, prices, etc.

  • Volume Discount

  • TS
  • General Steel
  • 3 Flutes
  • R (Regular)

  R Size(mm)	Blade length (ℓ)(mm)	Underneck length (ℓ1)(mm)	Shank diameter (d)(mm)	Number of flutes(sheet)	Overall Length (L)(mm)	work material	R Precision(μm)	Machining Application	Coating	Type
  1 ～ 6	5 ～ 22	17 ～ 72	6 ～ 12	3	50 ～ 110	Copper[○]	±0.01	Curved surface / Side / Engraving / R Groove	For High Hardness (Silicon Group)	Ball

  Days to Ship: Số ngày giao hàng: 4 Day(s) or more

  4 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  TSC Series Carbide Ball End Mill 4-Flute / Short Type

  MISUMI

  [Features]·Surface coarse of workpiece after processing is very good finish.·It has coating with high oxidation resistance and high hardness, and achieves a long service lifespan. Effective in high-speed machining and dry machining as coating properties·Can be regrinded. Please refer to the page dedicated to "regrinding service" for usage procedures, range of services, prices, etc.

  • Volume Discount

  • TS
  • General Steel
  • 4 Flutes
  • S (Short)

  R Size(mm)	Blade length (ℓ)(mm)	Underneck length (ℓ1)(mm)	Shank diameter (d)(mm)	Number of flutes(sheet)	Overall Length (L)(mm)	work material	R Precision(μm)	Machining Application	Coating	Type
  1 ～ 10	3 ～ 25	15 ～ 75	6 ～ 20	4	50 ～ 150	Copper[○]	±0.01	Curved surface / Side / Engraving / R Groove	For High Hardness (Silicon Group)	Ball

  Days to Ship: Số ngày giao hàng: 4 Day(s) or more

  4 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Carbide ball end mill, 2-flute / short model

  MISUMI

  Highly versatile due to the non-coated specification

  • Volume Discount

  • Non-Coated
  • General Steel
  • 2 Flutes
  • S (Short)

  R Size(mm)	Blade length (ℓ)(mm)	Underneck length (ℓ1)(mm)	Shank diameter (d)(mm)	Number of flutes(sheet)	Overall Length (L)(mm)	work material	R Precision(μm)	Machining Application	Coating	Type
  0.2 ～ 10	0.8 ～ 25	-	3 ～ 20	2	40 ～ 150	Copper[○]	±0.01	Curved surface / Side / Engraving / R Groove	Non-Coated	Ball

  Days to Ship: Số ngày giao hàng: 4 Day(s) or more

  4 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  DLC Coated Carbide Ball End Mill for Aluminum Machining, 2-Flute / Short Model

  MISUMI

  The cutting performance of aluminum has been improved by the combination of sharp cutting edge and DLC coating

  • Volume Discount

  • DLC
  • Aluminum
  • 2 Flutes
  • S (Short)

  R Size(mm)	Blade length (ℓ)(mm)	Underneck length (ℓ1)(mm)	Shank diameter (d)(mm)	Number of flutes(sheet)	Overall Length (L)(mm)	work material	R Precision(μm)	Machining Application	Coating	Type
  0.5 ～ 6	1.5 ～ 18	14 ～ 68	4 ～ 12	2	50 ～ 110	Copper[○]	±0.01	Curved surface / Side / Engraving / R Groove	DLC	Ball

  Days to Ship: Số ngày giao hàng: 4 Day(s) or more

  4 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  CRN Coated Ball End Mill for Copper Electrode Machining, 2-Flute / Short Model

  MISUMI

  Ideal for copper electrode processing due to the CrN coating that exhibits excellent lubricity

  • Volume Discount

  • CrN
  • Copper
  • 2 Flutes
  • S (Short)

  R Size(mm)	Blade length (ℓ)(mm)	Underneck length (ℓ1)(mm)	Shank diameter (d)(mm)	Number of flutes(sheet)	Overall Length (L)(mm)	work material	R Precision(μm)	Machining Application	Coating	Type
  0.5 ～ 6	1.5 ～ 18	-	4 ～ 12	2	50 ～ 120	Copper[◎]	±0.01	Curved surface / Side / Engraving / R Groove	CrN	Ball

  From: 918,520 VND
  Days to Ship: Số ngày giao hàng: 4 Day(s) or more

  4 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Diamond Coated Carbide Ball End Mill for Graphite Machining, 2-Flute

  MISUMI

  Diamond coated products that exert tremendous durability are available in the industry's lowest price

  • Volume Discount

  • DIA
  • Graphite
  • 2 Flutes
  • L (Long)

  R Size(mm)	Blade length (ℓ)(mm)	Underneck length (ℓ1)(mm)	Shank diameter (d)(mm)	Number of flutes(sheet)	Overall Length (L)(mm)	work material	R Precision(μm)	Machining Application	Coating	Type
  0.5 ～ 6	3 ～ 55	20 ～ 65	4 ～ 12	2	50 ～ 200	Copper[○]	±0.01	Curved surface / Side / Engraving / R Groove	Dia Coat	Ball

  From: 2,378,410 VND
  Days to Ship: Số ngày giao hàng: 4 Day(s) or more

  4 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Carbide Ball End Mill for Graphite Machining, 2-Flute / Long Model

  MISUMI

  The price of the non-coated product with excellent cost performance has been further reduced

  • Volume Discount

  • Non-Coated
  • Graphite
  • 2 Flutes
  • L (Long)

  R Size(mm)	Blade length (ℓ)(mm)	Underneck length (ℓ1)(mm)	Shank diameter (d)(mm)	Number of flutes(sheet)	Overall Length (L)(mm)	work material	R Precision(μm)	Machining Application	Coating	Type
  1 ～ 6	10 ～ 55	20 ～ 65	4 ～ 12	2	100 ～ 200	Copper[○]	±0.01	Curved surface / Side / Engraving / R Groove	Non-Coated	Ball

  From: 1,727,819 VND
  Days to Ship: Số ngày giao hàng: 4 Day(s) or more

  4 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Carbide Ball End Mill for Resin Machining, 2-Flute / Short Model

  MISUMI

  Sharp edge that's suitable for machining resin

  • Volume Discount

  • Non-Coated
  • Resin
  • 2 Flutes
  • S (Short)

  R Size(mm)	Blade length (ℓ)(mm)	Underneck length (ℓ1)(mm)	Shank diameter (d)(mm)	Number of flutes(sheet)	Overall Length (L)(mm)	work material	R Precision(μm)	Machining Application	Coating	Type
  0.5 ～ 6	1.5 ～ 18	-	4 ～ 12	2	50 ～ 120	Copper[○]	±0.01	Curved surface / Side / Engraving / R Groove	Non-Coated	Ball

  From: 719,194 VND
  Days to Ship: Số ngày giao hàng: 4 Day(s) or more

  4 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  XAL Series Carbide Ball End Mill 2-Flute / Short/Long Shank Type

  MISUMI

  A long shank type ideal for deep carving

  • Volume Discount

  • XAL
  • General Steel
  • 2 Flutes
  • S (Short)

  R Size(mm)	Blade length (ℓ)(mm)	Underneck length (ℓ1)(mm)	Shank diameter (d)(mm)	Number of flutes(sheet)	Overall Length (L)(mm)	work material	R Precision(μm)	Machining Application	Coating	Type
  1.5 ～ 10	4 ～ 25	-	3 ～ 20	2	80 ～ 250	Copper[◎]	-7 to +3 ～ ±10	Curved surface / Side / Engraving / R Groove	For General Steels (AlCrN, etc.)	Ball

  From: 763,200 VND
  Days to Ship: Số ngày giao hàng: 4 Day(s) or more

  4 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  DLC Mill, Ball 2DLCR

  NACHI(FUJIKOSHI)

  End mill for aluminum and copper alloys. Suitable for curved surface processing.

  R Size(mm)	Blade length (ℓ)(mm)	Underneck length (ℓ1)(mm)	Shank diameter (d)(mm)	Number of flutes(sheet)	Overall Length (L)(mm)	work material	R Precision(μm)	Machining Application	Coating	Type
  0.5 ～ 10	1.5 ～ 30	3 ～ 50	4 ～ 20	2	50 ～ 180	Copper[○]	0～-0.04 ～ 0～-0.03	Curved surface / Side / Engraving / R Groove	DLC	Ball

  From: 1,532,445 VND
  Days to Ship: Số ngày giao hàng: 6 Day(s) or more

  6 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Ball End Type, 2-Flute FX-SS-EBD

  OSG

  Slim shank type with a shank diameter that is set to the blade diameter minus 1 mm. The protruding length can be freely adjusted.

  R Size(mm)	Blade length (ℓ)(mm)	Underneck length (ℓ1)(mm)	Shank diameter (d)(mm)	Number of flutes(sheet)	Overall Length (L)(mm)	work material	R Precision(μm)	Machining Application	Coating	Type
  3 ～ 6	12 ～ 22	-	5 ～ 11	2	120 ～ 160	Copper[○]	-0.01～+0.01	Curved surface / Side / Engraving / R Groove	TiAlN	Ball

  From: 2,783,385 VND
  Days to Ship: Số ngày giao hàng: 6 Day(s) or more

  6 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Ball End Type, 2-Flute DIA-EBD

  OSG

  Allows both high-speed machining and dry cutting of aluminum. Also, great extension of tool life even in graphite processing has been achieved.

  R Size(mm)	Blade length (ℓ)(mm)	Underneck length (ℓ1)(mm)	Shank diameter (d)(mm)	Number of flutes(sheet)	Overall Length (L)(mm)	work material	R Precision(μm)	Machining Application	Coating	Type
  0.5 ～ 6	2.5 ～ 22	-	4 ～ 12	2	60 ～ 140	Copper[○]	-	Curved surface / Side / Engraving / R Groove	Dia Coat	Ball

  From: 4,128,357 VND
  Days to Ship: Số ngày giao hàng: 6 Day(s) or more

  6 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Ball End Type, 2-Flute DIA-EBD-SF

  OSG

  Demonstrates excellent durability when processing graphite, aluminum, etc.Work Material: Aluminum/Copper/GraphiteFor coating non-ferrous metals (Diamond coating)Standard/Alteration category: Manufacturer's standard productNumber of flutes (pcs.) 2Shank diameter (mm) 6

  R Size(mm)	Blade length (ℓ)(mm)	Underneck length (ℓ1)(mm)	Shank diameter (d)(mm)	Number of flutes(sheet)	Overall Length (L)(mm)	work material	R Precision(μm)	Machining Application	Coating	Type
  5 ～ 6	10 ～ 12	-	6	2	32 ～ 34	Copper[○]	-	Curved surface / Side / Engraving / R Groove	Dia Coat	Ball

  From: 9,331,393 VND
  Days to Ship: Số ngày giao hàng: 6 Day(s) or more

  6 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Ball End Type, 2-Flute DLC-EBD

  OSG

  [Notice] Alterations can now be specified. Please select from "Standard/Alterations Category" of narrowing conditions.[Features]・ Unique ultra-smooth DLC coating prevents welding. Achieves high speed in machining shapes such as aluminum alloys and provides a good finished surface.

  R Size(mm)	Blade length (ℓ)(mm)	Underneck length (ℓ1)(mm)	Shank diameter (d)(mm)	Number of flutes(sheet)	Overall Length (L)(mm)	work material	R Precision(μm)	Machining Application	Coating	Type
  0.5 ～ 10	2.5 ～ 38	-	4 ～ 20	2	50 ～ 160	Copper[○]	-0.01～+0.01	Curved surface / Side / Engraving / R Groove	DLC	Ball

  From: 2,145,423 VND
  Days to Ship: Số ngày giao hàng: 6 Day(s) or more

  6 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Ball End Type, 2-Flute FX-MG-EBD

  OSG

  [Notice] Alterations can now be specified. Please select from "Standard/Alterations Category" of narrowing conditions.[Features]・ A wide range of machining from general materials to hardened steel is possible. The manufacturer can also support high-speed machining centers.

  R Size(mm)	Blade length (ℓ)(mm)	Underneck length (ℓ1)(mm)	Shank diameter (d)(mm)	Number of flutes(sheet)	Overall Length (L)(mm)	work material	R Precision(μm)	Machining Application	Coating	Type
  0.5 ～ 15	2.5 ～ 55	-	4 ～ 25	2	50 ～ 180	Copper[○]	-0.01～+0.01	Curved surface / Side / Engraving / R Groove	TiAlN	Ball

  From: 2,561,288 VND
  Days to Ship: Số ngày giao hàng: 6 Day(s) or more

  6 Day(s) or more

BrandNhãn hiệu
Product SeriesDòng sản phẩm
From
Days to ShipSố ngày giao hàng
SpecificationsĐặc điểm kĩ thuật
R Size(mm)
Blade length (ℓ)(mm)
Underneck length (ℓ1)(mm)
Shank diameter (d)(mm)
Number of flutes(sheet)
Overall Length (L)(mm)
work material
R Precision(μm)
Machining Application
Coating
Type

	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare
BrandNhãn hiệu	OSG	MISUMI	MISUMI	NS TOOL	NS TOOL	MISUMI	NS TOOL	NS TOOL	OSG	OSG KOREA CORP	MISUMI	MISUMI	OSG	OSG	EIKOSHA	MISUMI	MISUMI	MISUMI	MISUMI	MISUMI	MISUMI	OSG	OSG	NS TOOL	DIJET	7 LEADERS	NS TOOL	MISUMI	MISUMI	MISUMI	MISUMI	MISUMI	MISUMI	MISUMI	MISUMI	MISUMI	MISUMI	MISUMI	MISUMI	NACHI(FUJIKOSHI)	OSG	OSG	OSG	OSG	OSG
Product SeriesDòng sản phẩm	Ball End Type, 2-Flute WXL-EBD	XAC series carbide ball end mill, 2-flute / short model	TSC series carbide ball end mill, 2-flute / short, long shank model	MSBH230 2-Flute Ball-End Mill for High-Hardness	MSB230 MUGEN-COATING 2-Flute Ball End Mill	TSC series carbide ball end mill, regular model	MSBH345 3-Flute Ball-End Mill for High-Hardness	MSB230G2 MUGEN-COATING High Precision Profit Ball End Mill	Ball End Type, 2-Flute MG-EBD-3	2-Flute Ball End Mill (GS-EBD)	XAL series carbide ball end mill, 2-flute / short model	TSC series carbide ball end mill, 4-flute / regular model	Ball End Type, 2-Flute CRN-EBD-3	Ball End Type, 2-Flute CRN-HS-EBD	Carbide Graphite Solid Ball End Mill 2-Flute, Long Type	TSC series carbide ball end mill (R accuracy ±3μm)	TSC series carbide ball end mill, for shrinkage fitting, 2-flute / stub model	XAC series carbide ball end mill, 2-flute / short, long shank model	Carbide Ball End Mill for Aluminum Machining, 2-Flute / Short Model	Diamond Coated Carbide Ball End Mill for Graphite Machining, 4-Flute / Short Model	XAL Series Carbide Ball End Mill, 2-Flute / Regular Model	Ball End Type, 2-Flute FX-MG-EBD-3	Ball End Type, 2-Flute WX-EBD	MSB345 3-Flute Ball-End Mill	One Cut Ball (Slim Shank) DZ-OCUB	Carbide 2-Flute Short Ball End Mill 30° B222X	NSB-2 Ball End Mill	TSC series carbide ball end mill (for shrink fit holder / R accuracy ±3 μm) 2-flute / stub model	TSC Series Carbide Ball End Mill 2-Flute / Short Type	TSC series carbide ball end mill, 3-flute / short model	TSC series carbide ball end mill, 3-flute / regular model	TSC Series Carbide Ball End Mill 4-Flute / Short Type	Carbide ball end mill, 2-flute / short model	DLC Coated Carbide Ball End Mill for Aluminum Machining, 2-Flute / Short Model	CRN Coated Ball End Mill for Copper Electrode Machining, 2-Flute / Short Model	Diamond Coated Carbide Ball End Mill for Graphite Machining, 2-Flute	Carbide Ball End Mill for Graphite Machining, 2-Flute / Long Model	Carbide Ball End Mill for Resin Machining, 2-Flute / Short Model	XAL Series Carbide Ball End Mill 2-Flute / Short/Long Shank Type	DLC Mill, Ball 2DLCR	Ball End Type, 2-Flute FX-SS-EBD	Ball End Type, 2-Flute DIA-EBD	Ball End Type, 2-Flute DIA-EBD-SF	Ball End Type, 2-Flute DLC-EBD	Ball End Type, 2-Flute FX-MG-EBD
From	483,333 VND	517,970 VND		595,863 VND	569,109 VND		1,697,886 VND	1,083,728 VND	1,773,426 VND	752,214 VND	328,423 VND Special Price On Sale Till 31/03/2025		1,913,688 VND	2,407,650 VND	3,530,919 VND	1,240,084 VND	531,732 VND	996,240 VND		2,671,593 VND		2,320,897 VND	900,582 VND	1,264,316 VND	1,666,068 VND	485,035 VND	1,330,238 VND	1,362,905 VND							918,520 VND	2,378,410 VND	1,727,819 VND	719,194 VND	763,200 VND	1,532,445 VND	2,783,385 VND	4,128,357 VND	9,331,393 VND	2,145,423 VND	2,561,288 VND
Days to ShipSố ngày giao hàng	6 Day(s) or more	4 Day(s) or more	4 Day(s) or more	6 Day(s) or more	6 Day(s) or more	4 Day(s) or more	6 Day(s) or more	6 Day(s) or more	6 Day(s) or more	4 Day(s) or more	Same day or more	4 Day(s) or more	6 Day(s) or more	6 Day(s) or more	6 Day(s) or more	4 Day(s) or more	4 Day(s) or more	4 Day(s) or more	4 Day(s) or more	4 Day(s) or more	Same day or more	6 Day(s) or more	6 Day(s) or more	6 Day(s) or more	6 Day(s) or more	8 Day(s) or more	6 Day(s) or more	4 Day(s) or more	Same day or more	4 Day(s) or more	4 Day(s) or more	4 Day(s) or more	4 Day(s) or more	4 Day(s) or more	4 Day(s) or more	4 Day(s) or more	4 Day(s) or more	4 Day(s) or more	4 Day(s) or more	6 Day(s) or more	6 Day(s) or more	6 Day(s) or more	6 Day(s) or more	6 Day(s) or more	6 Day(s) or more
SpecificationsĐặc điểm kĩ thuật		TiAlN General Steel 2 Flutes S (Short)	TS General Steel 2 Flutes S (Short)			TS General Steel 2 Flutes R (Regular)					XAL General Steel 2 Flutes	TS General Steel 4 Flutes R (Regular)				TS General Steel 2 Flutes S (Short)	TS General Steel 2 Flutes B (Stub)	TiAlN General Steel 2 Flutes	Non-Coated Aluminum 2 Flutes S (Short)	DIA Graphite 4 Flutes S (Short)	XAL General Steel 2 Flutes							TS General Steel 2 Flutes B (Stub)	TS General Steel 2 Flutes S (Short)	TS General Steel 3 Flutes S (Short)	TS General Steel 3 Flutes R (Regular)	TS General Steel 4 Flutes S (Short)	Non-Coated General Steel 2 Flutes S (Short)	DLC Aluminum 2 Flutes S (Short)	CrN Copper 2 Flutes S (Short)	DIA Graphite 2 Flutes L (Long)	Non-Coated Graphite 2 Flutes L (Long)	Non-Coated Resin 2 Flutes S (Short)	XAL General Steel 2 Flutes S (Short)
R Size(mm)	0.05 ～ 10	0.2 ～ 12.5	0.5 ～ 12.5	0.05 ～ 6	0.05 ～ 6	0.2 ～ 8	0.5 ～ 3	0.05 ～ 3	0.05 ～ 1.5	0.05 ～ 12.5	0.05 ～ 10	1.5 ～ 6	0.1 ～ 1.5	0.5 ～ 6	1 ～ 15	1.5 ～ 3	0.2 ～ 6	2 ～ 8	0.5 ～ 6	1 ～ 6	0.2 ～ 8	0.2 ～ 1.5	0.6	0.5 ～ 6	3 ～ 10	0.15 ～ 10	1 ～ 5.5	0.3 ～ 2	0.05 ～ 10	0.5 ～ 10	1 ～ 6	1 ～ 10	0.2 ～ 10	0.5 ～ 6	0.5 ～ 6	0.5 ～ 6	1 ～ 6	0.5 ～ 6	1.5 ～ 10	0.5 ～ 10	3 ～ 6	0.5 ～ 6	5 ～ 6	0.5 ～ 10	0.5 ～ 15
Blade length (ℓ)(mm)	0.2 ～ 38	0.8 ～ 50	2 ～ 30	0.1 ～ 20	0.1 ～ 20	1.5 ～ 30	1.5 ～ 10	0.1 ～ 10	0.2 ～ 8	0.2 ～ 50	0.2 ～ 38	5 ～ 22	0.4 ～ 8	1 ～ 12	20 ～ 80	4.5 ～ 9	0.4 ～ 12	8 ～ 30	1.5 ～ 18	4 ～ 24	1.5 ～ 48	0.8 ～ 8	3	1.5 ～ 20	9 ～ 30	0.6 ～ 38	3 ～ 15	0.6 ～ 4	0.2 ～ 25	2 ～ 25	5 ～ 22	3 ～ 25	0.8 ～ 25	1.5 ～ 18	1.5 ～ 18	3 ～ 55	10 ～ 55	1.5 ～ 18	4 ～ 25	1.5 ～ 30	12 ～ 22	2.5 ～ 22	10 ～ 12	2.5 ～ 38	2.5 ～ 55
Underneck length (ℓ1)(mm)	-	-	15 ～ 80	-	-	17 ～ 80	-	-	-	-	-	17 ～ 72	-	-	-	-	-	-	14 ～ 68	-	-	-	-	-	-	-	-	-	15 ～ 75	15 ～ 75	17 ～ 72	15 ～ 75	-	14 ～ 68	-	20 ～ 65	20 ～ 65	-	-	3 ～ 50	-	-	-	-	-
Shank diameter (d)(mm)	4 ～ 20	3 ～ 25	3 ～ 25	4 ～ 12	4 ～ 12	4 ～ 16	6	4 ～ 6	3	4 ～ 25	3 ～ 20	6 ～ 12	3	6 ～ 12	4 ～ 25	6	4 ～ 12	4 ～ 16	4 ～ 12	6 ～ 12	4 ～ 16	3	4	6 ～ 12	5 ～ 18	4 ～ 20	-	6	3 ～ 20	6 ～ 20	6 ～ 12	6 ～ 20	3 ～ 20	4 ～ 12	4 ～ 12	4 ～ 12	4 ～ 12	4 ～ 12	3 ～ 20	4 ～ 20	5 ～ 11	4 ～ 12	6	4 ～ 20	4 ～ 25
Number of flutes(sheet)	2	2	2	2	2	2	3	2	2	2	2	4	2	2	2	2	2	2	2	4	2	2	2	3	2	2	2	2	2	3	3	4	2	2	2	2	2	2	2	2	2	2	2	2	2
Overall Length (L)(mm)	40 ～ 160	40 ～ 180	70 ～ 280	50 ～ 100	50 ～ 110	50 ～ 140	60 ～ 80	50 ～ 80	40	40 ～ 180	40 ～ 160	60 ～ 110	40	50 ～ 80	120 ～ 250	60 ～ 90	40 ～ 65	100 ～ 250	50 ～ 110	50 ～ 80	50 ～ 140	40	50	60 ～ 120	120 ～ 180	50 ～ 100	-	40	40 ～ 150	50 ～ 150	50 ～ 110	50 ～ 150	40 ～ 150	50 ～ 110	50 ～ 120	50 ～ 200	100 ～ 200	50 ～ 120	80 ～ 250	50 ～ 180	120 ～ 160	60 ～ 140	32 ～ 34	50 ～ 160	50 ～ 180
work material	Copper[◎]	Copper[○]	Copper[○]	Copper[○]	Copper[◎]	Copper[○]	Copper[○]	Copper[◎]	Copper[○]	Copper[○]	Copper[○/◎]	Copper[○]	Copper[◎]	Copper[◎]	Copper[◎]	Copper[○]	Copper[○]	Copper[○]	Copper[○]	Copper[○]	Copper[◎]	Copper[○]	Copper[○]	Copper[◎]	Copper[○]	Copper[○]	Copper[◎]	Copper[○]	Copper[○]	Copper[○]	Copper[○]	Copper[○]	Copper[○]	Copper[○]	Copper[◎]	Copper[○]	Copper[○]	Copper[○]	Copper[◎]	Copper[○]	Copper[○]	Copper[○]	Copper[○]	Copper[○]	Copper[○]
R Precision(μm)	-0.007 to 0.003 ～ ±0.01	±0.01	-0.007 ~ +0.003 ～ ±0.01	0.005～-0.005 ～ 0.01～-0.01	0.005～-0.005 ～ 0.01～-0.01	-0.007 ~ +0.003 ～ ±0.01	0.01～-0.01	0.002～-0.002	-	-	-0.007 ~ +0.003 ～ ±0.01	±0.01	-0.01～+0.01	-0.01～+0.01	±0.02	-0.005 ~ +0.001 ～ ±0.003	-0.007 ~ +0.003 ～ ±0.005	±0.01	±0.01	±0.01	-0.007 ~ +0.003 ～ ±0.01	-0.01～+0.01	-0.01～+0.01	0.01～-0.01	10～-10	±10	-0.02 to 0.02 ～ -0.01 to 0.01	±0.003	-0.007 ~ +0.003 ～ ±0.01	±0.01	±0.01	±0.01	±0.01	±0.01	±0.01	±0.01	±0.01	±0.01	-7 to +3 ～ ±10	0～-0.04 ～ 0～-0.03	-0.01～+0.01	-	-	-0.01～+0.01	-0.01～+0.01
Machining Application	Curved surface / Side / Engraving / R Groove	Curved surface / Side / Engraving / R Groove	Curved surface / Side / Engraving / R Groove	Curved surface / Side / Engraving / R Groove	Curved surface / R Groove	Curved surface / Side / Engraving / R Groove	Curved surface / Side / Engraving / R Groove	Curved surface / Side / Engraving / R Groove	Curved surface / Side / Engraving / R Groove	Curved surface / Side / Engraving / R Groove	Curved surface / Side / Engraving / R Groove	Curved surface / Side / Engraving / R Groove	Curved surface / Side / Engraving / R Groove	Curved surface / Side / Engraving / R Groove	Curved surface / Side / Engraving / R Groove	Curved surface / Side / Engraving / R Groove	Curved surface / Side / Engraving / R Groove	Curved surface / Side / Engraving / R Groove	Curved surface / Side / Engraving / R Groove	Curved surface / Side / Engraving / R Groove	Curved surface / Side / Engraving / R Groove	Curved surface / Side / Engraving / R Groove	Curved surface / Side / Engraving / R Groove	Curved surface / Side / Engraving / R Groove	Curved surface / R Groove	Curved surface / Engraving / R Groove	Curved surface	Curved surface / Side / Engraving / R Groove	Curved surface / Side / Engraving / R Groove	Curved surface / Side / Engraving / R Groove	Curved surface / Side / Engraving / R Groove	Curved surface / Side / Engraving / R Groove	Curved surface / Side / Engraving / R Groove	Curved surface / Side / Engraving / R Groove	Curved surface / Side / Engraving / R Groove	Curved surface / Side / Engraving / R Groove	Curved surface / Side / Engraving / R Groove	Curved surface / Side / Engraving / R Groove	Curved surface / Side / Engraving / R Groove	Curved surface / Side / Engraving / R Groove	Curved surface / Side / Engraving / R Groove	Curved surface / Side / Engraving / R Groove	Curved surface / Side / Engraving / R Groove	Curved surface / Side / Engraving / R Groove	Curved surface / Side / Engraving / R Groove
Coating	For General Steels (AlCrN, etc.)	TiAlN	For High Hardness (Silicon Group)	For High Hardness (Silicon Group)	TiAlN	For High Hardness (Silicon Group)	For High Hardness (Silicon Group)	TiAlN	Non-Coated	FX	For General Steels (AlCrN, etc.)	For High Hardness (Silicon Group)	CrN	CrN	-	For High Hardness (Silicon Group)	For High Hardness (Silicon Group)	TiAlN	Non-Coated	Dia Coat	For General Steels (AlCrN, etc.)	TiAlN	TiAlN	TiAlN	TiAlN	-	Non-Coated	For High Hardness (Silicon Group)	For High Hardness (Silicon Group)	For High Hardness (Silicon Group)	For High Hardness (Silicon Group)	For High Hardness (Silicon Group)	Non-Coated	DLC	CrN	Dia Coat	Non-Coated	Non-Coated	For General Steels (AlCrN, etc.)	DLC	TiAlN	Dia Coat	Dia Coat	DLC	TiAlN
Type	Ball	Ball	Ball	Ball	Ball	Ball	Ball	Ball	Ball	Ball	Ball	Ball	Ball	Ball	Ball	Ball	Ball	Ball	Ball	Ball	Ball	Ball	Ball	Ball	Ball	Ball	Ball	Ball	Ball	Ball	Ball	Ball	Ball	Ball	Ball	Ball	Ball	Ball	Ball	Ball	Ball	Ball	Ball	Ball	Ball

Loading...Tải…