Ball End Mills (Carbide)

• You can add up to 6 items per a category to the compare list. Compare

  

  SMB120 CBN Ball End Mill CBN Micro Ball for Ultra-Fine Machining

  NS TOOL

  The world's first. Micro ball end mill made of CBN material. Achieves sharp edges by making the best use of the CBN material characteristics

  R Size(mm)	Blade length (ℓ)(mm)	Underneck length (ℓ1)(mm)	Shank diameter (d)(mm)	Number of flutes(sheet)	Overall Length (L)(mm)	work material	R Precision(μm)	Machining Application	Coating	Type
  0.01 ～ 0.05	0.02 ～ 0.1	-	4	1	50	general steel[○] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[◎] / High Hardness Steel-HRC60[◎] / High Hardness Steel-HRC65[◎] / Stainless Steel[○]	-	Curved surface / Side / Engraving / R Groove	Non-Coated	Ball

  From: 6,538,762 VND
  Days to Ship: Số ngày giao hàng: 12 Day(s)

  12 Day(s)

• You can add up to 6 items per a category to the compare list. Compare

  

  Ball End Type, 2-Flute WXL-EBD

  OSG

  [Features]· High-accuracy ball end mill coated with WXL hard lubricating film coating. Proven performance on a wide range of work materials. Long life regardless of whether being used for dry-type or wet-type machining.

  R Size(mm)	Blade length (ℓ)(mm)	Underneck length (ℓ1)(mm)	Shank diameter (d)(mm)	Number of flutes(sheet)	Overall Length (L)(mm)	work material	R Precision(μm)	Machining Application	Coating	Type
  0.05 ～ 10	0.2 ～ 38	-	4 ～ 20	2	40 ～ 160	general steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[○] / Stainless Steel[◎] / Cast Iron[◎] / Aluminum[○] / Titanium[○] / Copper[◎]	-0.007 to 0.003 ～ ±0.01	Curved surface / Side / Engraving / R Groove	For General Steels (AlCrN, etc.)	Ball

  From: 483,333 VND
  Days to Ship: Số ngày giao hàng: 6 Day(s) or more

  6 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Ball End Mill [2HPB]

  HANSONG M&T

  R Size(mm)	Blade length (ℓ)(mm)	Underneck length (ℓ1)(mm)	Shank diameter (d)(mm)	Number of flutes(sheet)	Overall Length (L)(mm)	work material	R Precision(μm)	Machining Application	Coating	Type
  R0.05 ～ R10.0	0.2 ～ 38	-	3 ～ 20	2	45 ～ 200	-	±0.005	-	TiSiN	Ball

  From: 905,347 VND
  Days to Ship: Số ngày giao hàng: 6 Day(s) or more

  6 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  XAC series carbide ball end mill, 2-flute / short model

  MISUMI

  [Features]·General purpose 2-blade ball end mill for wide range of profiling·For surface coarse of workpiece, good surface finish can be expected after machining.·Can be regrinded. Please refer to the page dedicated to "regrinding service" for usage procedures, range of services, prices, etc.

  • Volume Discount

  • TiAlN
  • General Steel
  • 2 Flutes
  • S (Short)

  R Size(mm)	Blade length (ℓ)(mm)	Underneck length (ℓ1)(mm)	Shank diameter (d)(mm)	Number of flutes(sheet)	Overall Length (L)(mm)	work material	R Precision(μm)	Machining Application	Coating	Type
  0.2 ～ 12.5	0.8 ～ 50	-	3 ～ 25	2	40 ～ 180	general steel[○] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○]	±0.01	Curved surface / Side / Engraving / R Groove	TiAlN	Ball

  From: 517,970 VND
  Days to Ship: Số ngày giao hàng: 4 Day(s) or more

  4 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  

  

  TSC series carbide ball end mill, 2-flute / short, long shank model

  MISUMI

  [Features]·Long shank type ideal for deep cavity millingIt has coating with high oxidation resistance and high hardness, and achieves a long service lifespan. Effective in high-speed machining and dry machining as coating properties·Can be regrinded. Please refer to the page dedicated to "regrinding service" for usage procedures, range of services, prices, etc.

  • Volume Discount

  • TS
  • General Steel
  • 2 Flutes
  • S (Short)

  R Size(mm)	Blade length (ℓ)(mm)	Underneck length (ℓ1)(mm)	Shank diameter (d)(mm)	Number of flutes(sheet)	Overall Length (L)(mm)	work material	R Precision(μm)	Machining Application	Coating	Type
  0.5 ～ 12.5	2 ～ 30	15 ～ 80	3 ～ 25	2	70 ～ 280	general steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○]	-0.007 ~ +0.003 ～ ±0.01	Curved surface / Side / Engraving / R Groove	For High Hardness (Silicon Group)	Ball

  Days to Ship: Số ngày giao hàng: 4 Day(s) or more

  4 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  MSBH230 2-Flute Ball-End Mill for High-Hardness

  NS TOOL

  [Notice] Alterations can now be specified. Please select from "Standard/Alterations Category" of narrowing conditions.[Features]・ Standard type ball end mill for high hardness. Ideal for finish machining・ Supports high hardness materials up to 68 HRC.

  R Size(mm)	Blade length (ℓ)(mm)	Underneck length (ℓ1)(mm)	Shank diameter (d)(mm)	Number of flutes(sheet)	Overall Length (L)(mm)	work material	R Precision(μm)	Machining Application	Coating	Type
  0.05 ～ 6	0.1 ～ 20	-	4 ～ 12	2	50 ～ 100	general steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[◎] / High Hardness Steel-HRC60[◎] / High Hardness Steel-HRC65[◎] / Stainless Steel[○] / Aluminum[○] / Titanium[◎] / Copper[○] / Resin[○]	0.005～-0.005 ～ 0.01～-0.01	Curved surface / Side / Engraving / R Groove	For High Hardness (Silicon Group)	Ball

  From: 595,863 VND
  Days to Ship: Số ngày giao hàng: 6 Day(s) or more

  6 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  MSB230 MUGEN-COATING 2-Flute Ball End Mill

  NS TOOL

  [Notice] Alterations can now be specified. Please select from "Standard/Alterations Category" of narrowing conditions.[Features]・ Supports precision 3D machining from low speed to high speed.

  R Size(mm)	Blade length (ℓ)(mm)	Underneck length (ℓ1)(mm)	Shank diameter (d)(mm)	Number of flutes(sheet)	Overall Length (L)(mm)	work material	R Precision(μm)	Machining Application	Coating	Type
  0.05 ～ 6	0.1 ～ 20	-	4 ～ 12	2	50 ～ 110	general steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[◎] / Stainless Steel[◎] / Aluminum[◎] / Titanium[○] / Copper[◎] / Resin[◎]	0.005～-0.005 ～ 0.01～-0.01	Curved surface / R Groove	TiAlN	Ball

  From: 569,109 VND
  Days to Ship: Số ngày giao hàng: 6 Day(s) or more

  6 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  TSC series carbide ball end mill, regular model

  MISUMI

  [Features]·Regular bridge length allows for many regrinding times·Can be regrinded. Please refer to the page dedicated to "regrinding service" for usage procedures, range of services, prices, etc.

  • Volume Discount

  • TS
  • General Steel
  • 2 Flutes
  • R (Regular)

  R Size(mm)	Blade length (ℓ)(mm)	Underneck length (ℓ1)(mm)	Shank diameter (d)(mm)	Number of flutes(sheet)	Overall Length (L)(mm)	work material	R Precision(μm)	Machining Application	Coating	Type
  0.2 ～ 8	1.5 ～ 30	17 ～ 80	4 ～ 16	2	50 ～ 140	general steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○]	-0.007 ~ +0.003 ～ ±0.01	Curved surface / Side / Engraving / R Groove	For High Hardness (Silicon Group)	Ball

  Days to Ship: Số ngày giao hàng: 4 Day(s) or more

  4 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  MSBH345 3-Flute Ball-End Mill for High-Hardness

  NS TOOL

  [Notice] Alterations can now be specified. Please select from "Standard/Alterations Category" of narrowing conditions.[Features]・ The MUGEN Coating Premium for high hardness and the unique new shape give the tool excellent chipping resistance, and reduced chattering improves the finished surface.・ Achieves stable and long lifespan with long-time machining in high hardness range (48 to 65 HRC). In pursuit of the cutting diameter shape, the manufacturer improved the amount of tilt and machining precision.・ High efficiency machining with less chattering is possible by adopting unique 3-flute shape and unequal division.

  R Size(mm)	Blade length (ℓ)(mm)	Underneck length (ℓ1)(mm)	Shank diameter (d)(mm)	Number of flutes(sheet)	Overall Length (L)(mm)	work material	R Precision(μm)	Machining Application	Coating	Type
  0.5 ～ 3	1.5 ～ 10	-	6	3	60 ～ 80	general steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[◎] / High Hardness Steel-HRC60[◎] / High Hardness Steel-HRC65[◎] / Stainless Steel[○] / Aluminum[○] / Titanium[◎] / Copper[○] / Resin[○]	0.01～-0.01	Curved surface / Side / Engraving / R Groove	For High Hardness (Silicon Group)	Ball

  From: 1,697,886 VND
  Days to Ship: Số ngày giao hàng: 6 Day(s) or more

  6 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  MSB230G2 MUGEN-COATING High Precision Profit Ball End Mill

  NS TOOL

  The tuned Infinity coating sustains high precision machining for a long time

  R Size(mm)	Blade length (ℓ)(mm)	Underneck length (ℓ1)(mm)	Shank diameter (d)(mm)	Number of flutes(sheet)	Overall Length (L)(mm)	work material	R Precision(μm)	Machining Application	Coating	Type
  0.05 ～ 3	0.1 ～ 10	-	4 ～ 6	2	50 ～ 80	general steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[◎] / Stainless Steel[◎] / Aluminum[◎] / Titanium[○] / Copper[◎] / Resin[◎]	0.002～-0.002	Curved surface / Side / Engraving / R Groove	TiAlN	Ball

  From: 1,083,728 VND
  Days to Ship: Số ngày giao hàng: 6 Day(s) or more

  6 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Ball End Mill [4HPB]

  HANSONG M&T

  R Size(mm)	Blade length (ℓ)(mm)	Underneck length (ℓ1)(mm)	Shank diameter (d)(mm)	Number of flutes(sheet)	Overall Length (L)(mm)	work material	R Precision(μm)	Machining Application	Coating	Type
  R0.5 ～ R10.0	2 ～ 38	-	4 ～ 20	4	50 ～ 150	-	±0.005	-	TiSiN	Ball

  From: 1,030,773 VND
  Days to Ship: Số ngày giao hàng: Quote

  Quote

• You can add up to 6 items per a category to the compare list. Compare

  

  Ball End Type, 2-Flute MG-EBD-3

  OSG

  Uses high-toughness carbide with high transverse rupture strength.Shank diameter (mm) 3, overall length (mm) 40, helix angle: standard helix (30 to 44°)

  R Size(mm)	Blade length (ℓ)(mm)	Underneck length (ℓ1)(mm)	Shank diameter (d)(mm)	Number of flutes(sheet)	Overall Length (L)(mm)	work material	R Precision(μm)	Machining Application	Coating	Type
  0.05 ～ 1.5	0.2 ～ 8	-	3	2	40	general steel[○] / Quenched and tempered steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○]	-	Curved surface / Side / Engraving / R Groove	Non-Coated	Ball

  From: 1,773,426 VND
  Days to Ship: Số ngày giao hàng: 6 Day(s) or more

  6 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  2-Flute Ball End Mill (GS-EBD)

  OSG KOREA CORP

  R Size(mm)	Blade length (ℓ)(mm)	Underneck length (ℓ1)(mm)	Shank diameter (d)(mm)	Number of flutes(sheet)	Overall Length (L)(mm)	work material	R Precision(μm)	Machining Application	Coating	Type
  0.05 ～ 12.5	0.2 ～ 50	-	4 ～ 25	2	40 ～ 180	general steel[◎] / Quenched and tempered steel[○] / High Hardness Steel-HRC55[○] / Stainless Steel[○] / Cast Iron[◎] / Copper[○]	-	Curved surface / Side / Engraving / R Groove	FX	Ball

  From: 752,214 VND
  Days to Ship: Số ngày giao hàng: 4 Day(s) or more

  4 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  

  XAL series carbide ball end mill, 2-flute / short model

  MISUMI

  XAL Series is the definitive choice for cost-sensitive customers

  • Volume Discount

  • XAL
  • General Steel
  • 2 Flutes

  R Size(mm)	Blade length (ℓ)(mm)	Underneck length (ℓ1)(mm)	Shank diameter (d)(mm)	Number of flutes(sheet)	Overall Length (L)(mm)	work material	R Precision(μm)	Machining Application	Coating	Type
  0.05 ～ 10	0.2 ～ 38	-	3 ～ 20	2	40 ～ 160	general steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[○] / Stainless Steel[○] / Cast Iron[◎] / Aluminum[◎] / Copper[○/◎] / Resin[○]	-0.007 ~ +0.003 ～ ±0.01	Curved surface / Side / Engraving / R Groove	For General Steels (AlCrN, etc.)	Ball

  Days to Ship: Số ngày giao hàng: Same day or more

  Same day or more

• You can add up to 6 items per a category to the compare list. Compare

  

  TSC series carbide ball end mill, 4-flute / regular model

  MISUMI

  [Features]·Surface coarse of workpiece after processing is very good finish.·It has coating with high oxidation resistance and high hardness, and achieves a long service lifespan. As coating characteristic, it is effective in high-speed machining and dry machining.·Can be regrinded. Please refer to the page dedicated to "regrinding service" for usage procedures, range of services, prices, etc.

  • Volume Discount

  • TS
  • General Steel
  • 4 Flutes
  • R (Regular)

  R Size(mm)	Blade length (ℓ)(mm)	Underneck length (ℓ1)(mm)	Shank diameter (d)(mm)	Number of flutes(sheet)	Overall Length (L)(mm)	work material	R Precision(μm)	Machining Application	Coating	Type
  1.5 ～ 6	5 ～ 22	17 ～ 72	6 ～ 12	4	60 ～ 110	general steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○]	±0.01	Curved surface / Side / Engraving / R Groove	For High Hardness (Silicon Group)	Ball

  Days to Ship: Số ngày giao hàng: 4 Day(s) or more

  4 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Ball End Type, 2-Flute CRN-EBD-3

  OSG

  A small diameter ball end mill series with a CrN coating for excellent lubricity. Ideal for fine processing of copper electrodes and IT parts.

  R Size(mm)	Blade length (ℓ)(mm)	Underneck length (ℓ1)(mm)	Shank diameter (d)(mm)	Number of flutes(sheet)	Overall Length (L)(mm)	work material	R Precision(μm)	Machining Application	Coating	Type
  0.1 ～ 1.5	0.4 ～ 8	-	3	2	40	Aluminum[○] / Copper[◎] / Resin[◎]	-0.01～+0.01	Curved surface / Side / Engraving / R Groove	CrN	Ball

  From: 1,913,688 VND
  Days to Ship: Số ngày giao hàng: 6 Day(s) or more

  6 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Ball End Type, 2-Flute CRN-HS-EBD

  OSG

  Achieving high-speed and high-precision machining by combining shrink and HSKWork Material: Aluminum/Copper/ResinFor coating non-ferrous metals (CrN)Standard/Alteration category: Manufacturer's standard productNumber of flutes (pcs.) 2Helix angle: Standard helix (30 to 44°), R accuracy (µm) ±10

  R Size(mm)	Blade length (ℓ)(mm)	Underneck length (ℓ1)(mm)	Shank diameter (d)(mm)	Number of flutes(sheet)	Overall Length (L)(mm)	work material	R Precision(μm)	Machining Application	Coating	Type
  0.5 ～ 6	1 ～ 12	-	6 ～ 12	2	50 ～ 80	Aluminum[○] / Copper[◎] / Resin[◎]	-0.01～+0.01	Curved surface / Side / Engraving / R Groove	CrN	Ball

  From: 2,407,650 VND
  Days to Ship: Số ngày giao hàng: 6 Day(s) or more

  6 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Short Ball End Mill [2HSB]

  HANSONG M&T

  R Size(mm)	Blade length (ℓ)(mm)	Underneck length (ℓ1)(mm)	Shank diameter (d)(mm)	Number of flutes(sheet)	Overall Length (L)(mm)	work material	R Precision(μm)	Machining Application	Coating	Type
  R0.05 ～ R6.0	0.1 ～ 15	-	4 ～ 12	2	40 ～ 60	-	±0.005	-	TiSiN	Ball

  From: 905,347 VND
  Days to Ship: Số ngày giao hàng: 7 Day(s) or more

  7 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  CBN Ball End Mill, 2-Flute

  MISUMI

  CBN ball end mill that's ideal for precision finishing is available at a value price

  • Volume Discount

  • High-Hardness Steel
  • 2 Flutes

  R Size(mm)	Blade length (ℓ)(mm)	Underneck length (ℓ1)(mm)	Shank diameter (d)(mm)	Number of flutes(sheet)	Overall Length (L)(mm)	work material	R Precision(μm)	Machining Application	Coating	Type
  0.3 ～ 1	0.5 ～ 1.2	1.5 ～ 5	4	2	50	general steel[○] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[◎] / High Hardness Steel-HRC60[◎] / High Hardness Steel-HRC65[◎]	±0.005	Curved surface / Side / Engraving / R Groove	Non-Coated	Ball

  From: 3,921,372 VND
  Days to Ship: Số ngày giao hàng: 4 Day(s) or more

  4 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  XCP Coated Carbide Ball End Mill For Tempered Steel / High Hardness Steel Machining / 2-Flute / Stub Type

  MISUMI

  · A highly versatile series that's ideal for machining work materials from tempered steel (up to 45 HRC) to high hardness steel (up to 65 HRC).· Coating with excellent hardness and heat resistance makes it suitable for high speed machining. Popular ball end mill for high-hardness machining

  • Volume Discount

  R Size(mm)	Blade length (ℓ)(mm)	Underneck length (ℓ1)(mm)	Shank diameter (d)(mm)	Number of flutes(sheet)	Overall Length (L)(mm)	work material	R Precision(μm)	Machining Application	Coating	Type
  0.5 ～ 12.5	1 ～ 25	2.2 ～ 50	4 ～ 25	2	40 ～ 180	general steel[○] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[◎] / High Hardness Steel-HRC60[◎] / High Hardness Steel-HRC65[◎] / Stainless Steel[○] / Cast Iron[◎]	±5 ～ ±10	Curved surface / Side / Engraving / R Groove	For High Hardness (Silicon Group)	Ball

  From: 437,250 VND
  Days to Ship: Số ngày giao hàng: 4 Day(s) or more

  4 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  X's Mill Geo Ball Long Shank 2GEOLSR

  NACHI(FUJIKOSHI)

  [Features]A carbide end mill with 2 flutes.The high cutting speed and high production efficiency lead to overall production cost reduction.The long shank allows contouring at deep positions and can be lengthened to suit the application.[Applications]Suitable for side milling, curved surface milling, engraving, and R-grooving.

  R Size(mm)	Blade length (ℓ)(mm)	Underneck length (ℓ1)(mm)	Shank diameter (d)(mm)	Number of flutes(sheet)	Overall Length (L)(mm)	work material	R Precision(μm)	Machining Application	Coating	Type
  0.5 ～ 15	1.5 ～ 45	10 ～ 100	4 ～ 32	2	80 ～ 230	general steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[◎] / High Hardness Steel-HRC60[◎] / Stainless Steel[◎] / Cast Iron[○] / Titanium[○]	0～-0.04 ～ 0～-0.03	Curved surface / Side / Engraving / R Groove	TiAlN	Ball

  From: 1,962,867 VND
  Days to Ship: Số ngày giao hàng: 6 Day(s) or more

  6 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  GS MILL Hard Ball GSBH

  NACHI(FUJIKOSHI)

  Suitable for high-speed finishing of high-hardness molds.

  R Size(mm)	Blade length (ℓ)(mm)	Underneck length (ℓ1)(mm)	Shank diameter (d)(mm)	Number of flutes(sheet)	Overall Length (L)(mm)	work material	R Precision(μm)	Machining Application	Coating	Type
  0.2 ～ 6	0.4 ～ 12	0.6 ～ 7.5	4 ～ 12	2	50 ～ 110	High Hardness Steel-HRC55[◎] / High Hardness Steel-HRC60[◎] / High Hardness Steel-HRC65[◎]	-	Curved surface / Side / Engraving / R Groove	TiAlN	Ball

  From: 1,855,065 VND
  Days to Ship: Số ngày giao hàng: 6 Day(s) or more

  6 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Aluminum Ball-End Mill ALB225

  NS TOOL

  [Notice] Alterations can now be specified. Please select from "Standard/Alterations Category" of narrowing conditions.[Features]・ The unique flute shape suppresses chattering during corner machining and side surface machining.

  R Size(mm)	Blade length (ℓ)(mm)	Underneck length (ℓ1)(mm)	Shank diameter (d)(mm)	Number of flutes(sheet)	Overall Length (L)(mm)	work material	R Precision(μm)	Machining Application	Coating	Type
  0.3 ～ 6	0.45 ～ 24	3 ～ 60	4 ～ 12	2	60 ～ 120	Aluminum[◎] / Resin[○]	0.01～-0.01	Curved surface / R Groove	Non-Coated	Ball

  From: 650,158 VND
  Days to Ship: Số ngày giao hàng: 6 Day(s) or more

  6 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Carbide Graphite Solid Ball End Mill 2-Flute, Long Type

  EIKOSHA

  Graphite Electrode Milling, Long Handle

  R Size(mm)	Blade length (ℓ)(mm)	Underneck length (ℓ1)(mm)	Shank diameter (d)(mm)	Number of flutes(sheet)	Overall Length (L)(mm)	work material	R Precision(μm)	Machining Application	Coating	Type
  1 ～ 15	20 ～ 80	-	4 ～ 25	2	120 ～ 250	Aluminum[◎] / Copper[◎] / Graphite[◎]	±0.02	Curved surface / Side / Engraving / R Groove	-	Ball

  From: 3,530,919 VND
  Days to Ship: Số ngày giao hàng: 6 Day(s) or more

  6 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Standard Ball End Mill, 2-Flute

  ATOM

  Supports a wide range of applications, from general steel to nonferrous metals and resins. High sharpness without coating achieves high-precision and high-quality finished surfaces.

  R Size(mm)	Blade length (ℓ)(mm)	Underneck length (ℓ1)(mm)	Shank diameter (d)(mm)	Number of flutes(sheet)	Overall Length (L)(mm)	work material	R Precision(μm)	Machining Application	Coating	Type
  0.5 ～ 10	3 ～ 40	-	4 ～ 20	2	40 ～ 105	general steel[○] / Quenched and tempered steel[○] / Stainless Steel[○] / Aluminum[◎] / Resin[◎]	±0.01	Curved surface / Side / Engraving / R Groove	Non-Coated	Ball

  From: 1,421,889 VND
  Days to Ship: Số ngày giao hàng: 6 Day(s) or more

  6 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Carbide Ball End Mill for Resin Processing PSB-2

  KYOWA SEIKO

  [Applications]It can be used for side machining, curved surface processing, carving processing, R processing, and grooving. [Features]It is possible to cut aluminum and resin by using carbide materials with high hardness.

  R Size(mm)	Blade length (ℓ)(mm)	Underneck length (ℓ1)(mm)	Shank diameter (d)(mm)	Number of flutes(sheet)	Overall Length (L)(mm)	work material	R Precision(μm)	Machining Application	Coating	Type
  0.1 ～ 3	0.6 ～ 20	-	3 ～ 6	2	45 ～ 100	Aluminum[◎] / Resin[◎]	＋0.01～－0.01	Curved surface / Side / Engraving / R Groove	-	Ball

  From: 1,486,413 VND
  Days to Ship: Số ngày giao hàng: 8 Day(s) or more

  8 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  TSC series carbide ball end mill (R accuracy ±3μm)

  MISUMI

  [Features]·Radius tolerance within 6 µm (compared to the manufacturer measurement), shank diameter tolerance h5 standard adopted. Optimal for high precision 3D machining of molds with high-quality tools with little variation in quality·Seamless shape (sharpening from outer edge to center of rounded blade in 1 process) is designed to create smooth cutting edge flank with no steps

  • Volume Discount

  • TS
  • General Steel
  • 2 Flutes
  • S (Short)

  R Size(mm)	Blade length (ℓ)(mm)	Underneck length (ℓ1)(mm)	Shank diameter (d)(mm)	Number of flutes(sheet)	Overall Length (L)(mm)	work material	R Precision(μm)	Machining Application	Coating	Type
  1.5 ～ 3	4.5 ～ 9	-	6	2	60 ～ 90	general steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○]	-0.005 ~ +0.001 ～ ±0.003	Curved surface / Side / Engraving / R Groove	For High Hardness (Silicon Group)	Ball

  From: 1,240,084 VND
  Days to Ship: Số ngày giao hàng: 4 Day(s) or more

  4 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  TSC series carbide ball end mill, for shrinkage fitting, 2-flute / stub model

  MISUMI

  [Features]·Compatible with shrink fit chucks for high-precision machining·Designed with short flute length and overall length for shrink fit and emphasis on rigidityIt has coating with high oxidation resistance and high hardness, and achieves a long service lifespan. Effective in high-speed machining and dry machining as coating properties

  • Volume Discount

  • TS
  • General Steel
  • 2 Flutes
  • B (Stub)

  R Size(mm)	Blade length (ℓ)(mm)	Underneck length (ℓ1)(mm)	Shank diameter (d)(mm)	Number of flutes(sheet)	Overall Length (L)(mm)	work material	R Precision(μm)	Machining Application	Coating	Type
  0.2 ～ 6	0.4 ～ 12	-	4 ～ 12	2	40 ～ 65	general steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○]	-0.007 ~ +0.003 ～ ±0.005	Curved surface / Side / Engraving / R Groove	For High Hardness (Silicon Group)	Ball

  From: 531,732 VND
  Days to Ship: Số ngày giao hàng: 4 Day(s) or more

  4 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  XAC series carbide ball end mill, 2-flute / short, long shank model

  MISUMI

  [Features]·Ideal for high accuracy 3D machining of molds due to high tool rigidity and excellent chip removal capability·For surface coarse of workpiece, good surface finish can be expected after machining.·Long shank type, ideal for deep cavity milling·Can be regrinded. Please refer to the page dedicated to "regrinding service" for usage procedures, range of services, prices, etc.

  • Volume Discount

  • TiAlN
  • General Steel
  • 2 Flutes

  R Size(mm)	Blade length (ℓ)(mm)	Underneck length (ℓ1)(mm)	Shank diameter (d)(mm)	Number of flutes(sheet)	Overall Length (L)(mm)	work material	R Precision(μm)	Machining Application	Coating	Type
  2 ～ 8	8 ～ 30	-	4 ～ 16	2	100 ～ 250	general steel[○] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○]	±0.01	Curved surface / Side / Engraving / R Groove	TiAlN	Ball

  From: 996,240 VND
  Days to Ship: Số ngày giao hàng: 4 Day(s) or more

  4 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  TSC Series Carbide Ball End Mill (for Shrink Fit Holder) for High-Hardness Steel Machining, 2-Flute / Stub Model

  MISUMI

  The high precision ball end mill for shrink fit holder is ideal for the high-precision 3D machining of high-hardness steel

  • Volume Discount

  • TS
  • High-Hardness Steel
  • 2 Flutes
  • B (Stub)

  R Size(mm)	Blade length (ℓ)(mm)	Underneck length (ℓ1)(mm)	Shank diameter (d)(mm)	Number of flutes(sheet)	Overall Length (L)(mm)	work material	R Precision(μm)	Machining Application	Coating	Type
  0.3 ～ 3	0.6 ～ 6	-	6	2	40	general steel[○] / Quenched and tempered steel[○] / High Hardness Steel-HRC55[◎] / High Hardness Steel-HRC60[◎] / High Hardness Steel-HRC65[◎] / Stainless Steel[○] / Cast Iron[◎]	-0.005 ~ +0.001 ～ ±0.003	Curved surface / Side / Engraving / R Groove	For High Hardness (Silicon Group)	Ball

  From: 1,363,947 VND
  Days to Ship: Số ngày giao hàng: 4 Day(s) or more

  4 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Carbide Ball End Mill for Aluminum Machining, 2-Flute / Short Model

  MISUMI

  A type for aluminum that achieves high efficiency while having the affordable uncoated design

  • Volume Discount

  • Non-Coated
  • Aluminum
  • 2 Flutes
  • S (Short)

  R Size(mm)	Blade length (ℓ)(mm)	Underneck length (ℓ1)(mm)	Shank diameter (d)(mm)	Number of flutes(sheet)	Overall Length (L)(mm)	work material	R Precision(μm)	Machining Application	Coating	Type
  0.5 ～ 6	1.5 ～ 18	14 ～ 68	4 ～ 12	2	50 ～ 110	Aluminum[◎] / Copper[○] / Graphite[○] / Resin[○]	±0.01	Curved surface / Side / Engraving / R Groove	Non-Coated	Ball

  Days to Ship: Số ngày giao hàng: 4 Day(s) or more

  4 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Diamond Coated Carbide Ball End Mill for Graphite Machining, 4-Flute / Short Model

  MISUMI

  4-flute ball for graphite that achieves high feed

  • Volume Discount

  • DIA
  • Graphite
  • 4 Flutes
  • S (Short)

  R Size(mm)	Blade length (ℓ)(mm)	Underneck length (ℓ1)(mm)	Shank diameter (d)(mm)	Number of flutes(sheet)	Overall Length (L)(mm)	work material	R Precision(μm)	Machining Application	Coating	Type
  1 ～ 6	4 ～ 24	-	6 ～ 12	4	50 ～ 80	Aluminum[○] / Copper[○] / Graphite[◎] / Resin[○]	±0.01	Curved surface / Side / Engraving / R Groove	Dia Coat	Ball

  From: 2,671,593 VND
  Days to Ship: Số ngày giao hàng: 4 Day(s) or more

  4 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  XAL Series Carbide Ball End Mill, 2-Flute / Regular Model

  MISUMI

  The regular flute length type is introduced in the low-price and popular XAL balls

  • Volume Discount

  • XAL
  • General Steel
  • 2 Flutes

  R Size(mm)	Blade length (ℓ)(mm)	Underneck length (ℓ1)(mm)	Shank diameter (d)(mm)	Number of flutes(sheet)	Overall Length (L)(mm)	work material	R Precision(μm)	Machining Application	Coating	Type
  0.2 ～ 8	1.5 ～ 48	-	4 ～ 16	2	50 ～ 140	general steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[○] / Stainless Steel[○] / Cast Iron[◎] / Aluminum[◎] / Copper[◎] / Resin[○]	-0.007 ~ +0.003 ～ ±0.01	Curved surface / Side / Engraving / R Groove	For General Steels (AlCrN, etc.)	Ball

  Days to Ship: Số ngày giao hàng: Same day or more

  Same day or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Ball End Type, 2-Flute for Graphite DG-EBD

  OSG

  [Features]・ Uses a dedicated graphite-only DG coating with excellent abrasion resistance.・ DG coating realizes low resistance with sharp cutting edge with little roundness. Controls chipping of the workpiece・ Seamless shape that improves the quality of shape machining・ An end mill with a diamond coating dedicated for graphite.

  R Size(mm)	Blade length (ℓ)(mm)	Underneck length (ℓ1)(mm)	Shank diameter (d)(mm)	Number of flutes(sheet)	Overall Length (L)(mm)	work material	R Precision(μm)	Machining Application	Coating	Type
  2 ～ 6	8 ～ 60	-	4 ～ 12	2	80 ～ 200	Aluminum[○] / Graphite[◎] / Resin[◎]	-0.01～+0.01	Curved surface / Side / Engraving / R Groove	DG	Ball

  From: 4,128,357 VND
  Days to Ship: Số ngày giao hàng: 6 Day(s) or more

  6 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Ball End Type, 2-Flute FX-MG-EBD-3

  OSG

  A wide range of machining is possible with the adoption of FX coating and high-toughness carbide material.Coated for steelStandard/Alteration category: Manufacturer's standard productNumber of flutes (pcs.) 2Shank diameter (mm) 3, overall length (mm) 40, helix angle: standard helix (30 to 44°)R Accuracy (µm) ±10

  R Size(mm)	Blade length (ℓ)(mm)	Underneck length (ℓ1)(mm)	Shank diameter (d)(mm)	Number of flutes(sheet)	Overall Length (L)(mm)	work material	R Precision(μm)	Machining Application	Coating	Type
  0.2 ～ 1.5	0.8 ～ 8	-	3	2	40	general steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[◎] / High Hardness Steel-HRC60[○] / Stainless Steel[◎] / Cast Iron[◎] / Aluminum[○] / Titanium[○] / Copper[○]	-0.01～+0.01	Curved surface / Side / Engraving / R Groove	TiAlN	Ball

  From: 2,320,897 VND
  Days to Ship: Số ngày giao hàng: 6 Day(s) or more

  6 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Ball End Type, 2-Flute WX-EBD

  OSG

  A general-purpose ball end mill that can be used for a wide range of work materials and machining. Enables stable continuous processing for many hours thanks to high toughness carbide being used as its base material.

  R Size(mm)	Blade length (ℓ)(mm)	Underneck length (ℓ1)(mm)	Shank diameter (d)(mm)	Number of flutes(sheet)	Overall Length (L)(mm)	work material	R Precision(μm)	Machining Application	Coating	Type
  0.6	3	-	4	2	50	general steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[◎] / High Hardness Steel-HRC60[○] / Stainless Steel[◎] / Cast Iron[◎] / Aluminum[○] / Titanium[○] / Copper[○]	-0.01～+0.01	Curved surface / Side / Engraving / R Groove	TiAlN	Ball

  From: 900,582 VND
  Days to Ship: Số ngày giao hàng: 6 Day(s) or more

  6 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Ball End Type, 3-Flute FXS-PC-EBT

  OSG

  In addition to conventional coating properties, this coating has extremely high oxidation resistance to achieve high-speed machining.

  R Size(mm)	Blade length (ℓ)(mm)	Underneck length (ℓ1)(mm)	Shank diameter (d)(mm)	Number of flutes(sheet)	Overall Length (L)(mm)	work material	R Precision(μm)	Machining Application	Coating	Type
  1 ～ 6	2 ～ 12	20 ～ 85	6 ～ 16	3	70 ～ 160	general steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[◎] / High Hardness Steel-HRC60[○] / High Hardness Steel-HRC65[○]	-0.015～+0.015	Curved surface / Side / Engraving / R Groove	TiAlN	Ball

  From: 3,013,153 VND
  Days to Ship: Số ngày giao hàng: 6 Day(s) or more

  6 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Pencil-Neck Type, 3-Flute PHX-PC-DBT

  OSG

  Realizes high efficiency machining that will change the way you think about deep engraving. The unique spiral ball blade prevents vibration during deep-engraving and achieves stable high-feed cutting.

  R Size(mm)	Blade length (ℓ)(mm)	Underneck length (ℓ1)(mm)	Shank diameter (d)(mm)	Number of flutes(sheet)	Overall Length (L)(mm)	work material	R Precision(μm)	Machining Application	Coating	Type
  0.5 ～ 6	1.5 ～ 18	6 ～ 160.8	6 ～ 20	3	60 ～ 220	general steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[◎] / High Hardness Steel-HRC60[○] / Stainless Steel[○] / Cast Iron[○]	-	Curved surface / Side / Engraving / R Groove	For High Hardness (Silicon Group)	Ball

  From: 2,341,749 VND
  Days to Ship: Số ngày giao hàng: 6 Day(s) or more

  6 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Ball End Type, 3-Flute PHX-DBT

  OSG

  Ball end mill with a new design that's given a low-resistance blade shape in order to increase the amount of cutting per blade. Unprecedented high-feed processing is possible.

  R Size(mm)	Blade length (ℓ)(mm)	Underneck length (ℓ1)(mm)	Shank diameter (d)(mm)	Number of flutes(sheet)	Overall Length (L)(mm)	work material	R Precision(μm)	Machining Application	Coating	Type
  0.5 ～ 10	1.5 ～ 30	-	6 ～ 20	3	60 ～ 200	general steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[◎] / High Hardness Steel-HRC60[○] / Stainless Steel[○] / Cast Iron[○]	-0.01～+0.01	Curved surface / Side / Engraving / R Groove	TiAlN	Ball

  From: 3,107,382 VND
  Days to Ship: Số ngày giao hàng: 6 Day(s) or more

  6 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  MSB345 3-Flute Ball-End Mill

  NS TOOL

  [Notice] Alterations can now be specified. Please select from "standard / machining category" of narrowing condition.[Features]・ High efficiency machining with less chattering is possible by adopting unique 3-flute shape and unequal division.

  R Size(mm)	Blade length (ℓ)(mm)	Underneck length (ℓ1)(mm)	Shank diameter (d)(mm)	Number of flutes(sheet)	Overall Length (L)(mm)	work material	R Precision(μm)	Machining Application	Coating	Type
  0.5 ～ 6	1.5 ～ 20	-	6 ～ 12	3	60 ～ 120	general steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[◎] / Stainless Steel[◎] / Aluminum[◎] / Titanium[○] / Copper[◎] / Resin[◎]	0.01～-0.01	Curved surface / Side / Engraving / R Groove	TiAlN	Ball

  From: 1,264,316 VND
  Days to Ship: Số ngày giao hàng: 6 Day(s) or more

  6 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  SBD2LA Long Ball End Mill, 2-Flute, OK Coated

  OKAZAKI SEIKO

  [Features]A carbide long ball end mill with 2 flutes.The deep rib type prevents tool interference during deep cutting.The long shank allows for a wide range of die milling.[Applications]Suitable for curved surface milling, engraving, and R-grooving.

  R Size(mm)	Blade length (ℓ)(mm)	Underneck length (ℓ1)(mm)	Shank diameter (d)(mm)	Number of flutes(sheet)	Overall Length (L)(mm)	work material	R Precision(μm)	Machining Application	Coating	Type
  1 ～ 12.5	2 ～ 60	14 ～ 21	6 ～ 25	2	80 ～ 230	general steel[◎] / Quenched and tempered steel[◎] / Stainless Steel[○] / Cast Iron[◎] / Aluminum[○] / Titanium[○]	-	Curved surface / Engraving / R Groove	TiAlN	Ball

  From: 1,654,018 VND
  Days to Ship: Số ngày giao hàng: 8 Day(s) or more

  8 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Solid ball end mill L S-SBE

  DIJET

  Ultrafine particle carbide alloy with excellent wear resistance ensures long tool life.

  R Size(mm)	Blade length (ℓ)(mm)	Underneck length (ℓ1)(mm)	Shank diameter (d)(mm)	Number of flutes(sheet)	Overall Length (L)(mm)	work material	R Precision(μm)	Machining Application	Coating	Type
  1 ～ 15	4 ～ 70	-	4 ～ 32	2	140 ～ 250	general steel[○] / Quenched and tempered steel[○] / Graphite[○]	-	Curved surface / Engraving / R Groove	Non-Coated	Ball

  From: 4,193,600 VND
  Days to Ship: Số ngày giao hàng: 8 Day(s) or more

  8 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  One Cut Ball (Slim Shank) DZ-OCUB

  DIJET

  Ultrafine particle carbide alloy with excellent wear resistance ensures long tool life.

  R Size(mm)	Blade length (ℓ)(mm)	Underneck length (ℓ1)(mm)	Shank diameter (d)(mm)	Number of flutes(sheet)	Overall Length (L)(mm)	work material	R Precision(μm)	Machining Application	Coating	Type
  3 ～ 10	9 ～ 30	5.8 ～ 7.8	5 ～ 18	2	120 ～ 180	general steel[○/◎] / Quenched and tempered steel[○/◎] / High Hardness Steel-HRC55[○] / High Hardness Steel-HRC60[○] / High Hardness Steel-HRC65[○] / Stainless Steel[○] / Cast Iron[○/◎] / Aluminum[○] / Titanium[○] / Copper[○]	10～-10	Curved surface / R Groove	TiAlN	Ball

  From: 1,666,068 VND
  Days to Ship: Số ngày giao hàng: 6 Day(s) or more

  6 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Tipped-blade ball end mill, BE-type

  DIJET

  Ultrafine particle carbide alloy with excellent wear resistance ensures long tool life.

  R Size(mm)	Blade length (ℓ)(mm)	Underneck length (ℓ1)(mm)	Shank diameter (d)(mm)	Number of flutes(sheet)	Overall Length (L)(mm)	work material	R Precision(μm)	Machining Application	Coating	Type
  5 ～ 25	30 ～ 80	48 ～ 120	10 ～ 42	2	120 ～ 240	-	-	Curved surface / Engraving / R Groove	Non-Coated	Ball

  From: 6,371,723 VND
  Days to Ship: Số ngày giao hàng: 8 Day(s) or more

  8 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  2-Flute Ball (Standard)

  YG 1

  R Size(mm)	Blade length (ℓ)(mm)	Underneck length (ℓ1)(mm)	Shank diameter (d)(mm)	Number of flutes(sheet)	Overall Length (L)(mm)	work material	R Precision(μm)	Machining Application	Coating	Type
  0.75 ～ 5	4 ～ 18	-	6 ～ 10	2	50 ～ 100	general steel[○] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[○] / Cast Iron[○]	-	Curved surface / Side / Engraving / R Groove	Y coating	Ball

  From: 375,875 VND
  Days to Ship: Số ngày giao hàng: 4 Day(s)

  4 Day(s)

BrandNhãn hiệu
Product SeriesDòng sản phẩm
From
Days to ShipSố ngày giao hàng
SpecificationsĐặc điểm kĩ thuật
R Size(mm)
Blade length (ℓ)(mm)
Underneck length (ℓ1)(mm)
Shank diameter (d)(mm)
Number of flutes(sheet)
Overall Length (L)(mm)
work material
R Precision(μm)
Machining Application
Coating
Type

	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare
BrandNhãn hiệu	NS TOOL	OSG	HANSONG M&T	MISUMI	MISUMI	NS TOOL	NS TOOL	MISUMI	NS TOOL	NS TOOL	HANSONG M&T	OSG	OSG KOREA CORP	MISUMI	MISUMI	OSG	OSG	HANSONG M&T	MISUMI	MISUMI	NACHI(FUJIKOSHI)	NACHI(FUJIKOSHI)	NS TOOL	EIKOSHA	ATOM	KYOWA SEIKO	MISUMI	MISUMI	MISUMI	MISUMI	MISUMI	MISUMI	MISUMI	OSG	OSG	OSG	OSG	OSG	OSG	NS TOOL	OKAZAKI SEIKO	DIJET	DIJET	DIJET	YG 1
Product SeriesDòng sản phẩm	SMB120 CBN Ball End Mill CBN Micro Ball for Ultra-Fine Machining	Ball End Type, 2-Flute WXL-EBD	Ball End Mill [2HPB]	XAC series carbide ball end mill, 2-flute / short model	TSC series carbide ball end mill, 2-flute / short, long shank model	MSBH230 2-Flute Ball-End Mill for High-Hardness	MSB230 MUGEN-COATING 2-Flute Ball End Mill	TSC series carbide ball end mill, regular model	MSBH345 3-Flute Ball-End Mill for High-Hardness	MSB230G2 MUGEN-COATING High Precision Profit Ball End Mill	Ball End Mill [4HPB]	Ball End Type, 2-Flute MG-EBD-3	2-Flute Ball End Mill (GS-EBD)	XAL series carbide ball end mill, 2-flute / short model	TSC series carbide ball end mill, 4-flute / regular model	Ball End Type, 2-Flute CRN-EBD-3	Ball End Type, 2-Flute CRN-HS-EBD	Short Ball End Mill [2HSB]	CBN Ball End Mill, 2-Flute	XCP Coated Carbide Ball End Mill For Tempered Steel / High Hardness Steel Machining / 2-Flute / Stub Type	X's Mill Geo Ball Long Shank 2GEOLSR	GS MILL Hard Ball GSBH	Aluminum Ball-End Mill ALB225	Carbide Graphite Solid Ball End Mill 2-Flute, Long Type	Standard Ball End Mill, 2-Flute	Carbide Ball End Mill for Resin Processing PSB-2	TSC series carbide ball end mill (R accuracy ±3μm)	TSC series carbide ball end mill, for shrinkage fitting, 2-flute / stub model	XAC series carbide ball end mill, 2-flute / short, long shank model	TSC Series Carbide Ball End Mill (for Shrink Fit Holder) for High-Hardness Steel Machining, 2-Flute / Stub Model	Carbide Ball End Mill for Aluminum Machining, 2-Flute / Short Model	Diamond Coated Carbide Ball End Mill for Graphite Machining, 4-Flute / Short Model	XAL Series Carbide Ball End Mill, 2-Flute / Regular Model	Ball End Type, 2-Flute for Graphite DG-EBD	Ball End Type, 2-Flute FX-MG-EBD-3	Ball End Type, 2-Flute WX-EBD	Ball End Type, 3-Flute FXS-PC-EBT	Pencil-Neck Type, 3-Flute PHX-PC-DBT	Ball End Type, 3-Flute PHX-DBT	MSB345 3-Flute Ball-End Mill	SBD2LA Long Ball End Mill, 2-Flute, OK Coated	Solid ball end mill L S-SBE	One Cut Ball (Slim Shank) DZ-OCUB	Tipped-blade ball end mill, BE-type	2-Flute Ball (Standard)
From	6,538,762 VND	483,333 VND	905,347 VND	517,970 VND		595,863 VND	569,109 VND		1,697,886 VND	1,083,728 VND	1,030,773 VND	1,773,426 VND	752,214 VND			1,913,688 VND	2,407,650 VND	905,347 VND	3,921,372 VND	437,250 VND	1,962,867 VND	1,855,065 VND	650,158 VND	3,530,919 VND	1,421,889 VND	1,486,413 VND	1,240,084 VND	531,732 VND	996,240 VND	1,363,947 VND		2,671,593 VND		4,128,357 VND	2,320,897 VND	900,582 VND	3,013,153 VND	2,341,749 VND	3,107,382 VND	1,264,316 VND	1,654,018 VND	4,193,600 VND	1,666,068 VND	6,371,723 VND	375,875 VND
Days to ShipSố ngày giao hàng	12 Day(s)	6 Day(s) or more	6 Day(s) or more	4 Day(s) or more	4 Day(s) or more	6 Day(s) or more	6 Day(s) or more	4 Day(s) or more	6 Day(s) or more	6 Day(s) or more	Quote	6 Day(s) or more	4 Day(s) or more	Same day or more	4 Day(s) or more	6 Day(s) or more	6 Day(s) or more	7 Day(s) or more	4 Day(s) or more	4 Day(s) or more	6 Day(s) or more	6 Day(s) or more	6 Day(s) or more	6 Day(s) or more	6 Day(s) or more	8 Day(s) or more	4 Day(s) or more	4 Day(s) or more	4 Day(s) or more	4 Day(s) or more	4 Day(s) or more	4 Day(s) or more	Same day or more	6 Day(s) or more	6 Day(s) or more	6 Day(s) or more	6 Day(s) or more	6 Day(s) or more	6 Day(s) or more	6 Day(s) or more	8 Day(s) or more	8 Day(s) or more	6 Day(s) or more	8 Day(s) or more	4 Day(s)
SpecificationsĐặc điểm kĩ thuật				TiAlN General Steel 2 Flutes S (Short)	TS General Steel 2 Flutes S (Short)			TS General Steel 2 Flutes R (Regular)						XAL General Steel 2 Flutes	TS General Steel 4 Flutes R (Regular)				High-Hardness Steel 2 Flutes								TS General Steel 2 Flutes S (Short)	TS General Steel 2 Flutes B (Stub)	TiAlN General Steel 2 Flutes	TS High-Hardness Steel 2 Flutes B (Stub)	Non-Coated Aluminum 2 Flutes S (Short)	DIA Graphite 4 Flutes S (Short)	XAL General Steel 2 Flutes
R Size(mm)	0.01 ～ 0.05	0.05 ～ 10	R0.05 ～ R10.0	0.2 ～ 12.5	0.5 ～ 12.5	0.05 ～ 6	0.05 ～ 6	0.2 ～ 8	0.5 ～ 3	0.05 ～ 3	R0.5 ～ R10.0	0.05 ～ 1.5	0.05 ～ 12.5	0.05 ～ 10	1.5 ～ 6	0.1 ～ 1.5	0.5 ～ 6	R0.05 ～ R6.0	0.3 ～ 1	0.5 ～ 12.5	0.5 ～ 15	0.2 ～ 6	0.3 ～ 6	1 ～ 15	0.5 ～ 10	0.1 ～ 3	1.5 ～ 3	0.2 ～ 6	2 ～ 8	0.3 ～ 3	0.5 ～ 6	1 ～ 6	0.2 ～ 8	2 ～ 6	0.2 ～ 1.5	0.6	1 ～ 6	0.5 ～ 6	0.5 ～ 10	0.5 ～ 6	1 ～ 12.5	1 ～ 15	3 ～ 10	5 ～ 25	0.75 ～ 5
Blade length (ℓ)(mm)	0.02 ～ 0.1	0.2 ～ 38	0.2 ～ 38	0.8 ～ 50	2 ～ 30	0.1 ～ 20	0.1 ～ 20	1.5 ～ 30	1.5 ～ 10	0.1 ～ 10	2 ～ 38	0.2 ～ 8	0.2 ～ 50	0.2 ～ 38	5 ～ 22	0.4 ～ 8	1 ～ 12	0.1 ～ 15	0.5 ～ 1.2	1 ～ 25	1.5 ～ 45	0.4 ～ 12	0.45 ～ 24	20 ～ 80	3 ～ 40	0.6 ～ 20	4.5 ～ 9	0.4 ～ 12	8 ～ 30	0.6 ～ 6	1.5 ～ 18	4 ～ 24	1.5 ～ 48	8 ～ 60	0.8 ～ 8	3	2 ～ 12	1.5 ～ 18	1.5 ～ 30	1.5 ～ 20	2 ～ 60	4 ～ 70	9 ～ 30	30 ～ 80	4 ～ 18
Underneck length (ℓ1)(mm)	-	-	-	-	15 ～ 80	-	-	17 ～ 80	-	-	-	-	-	-	17 ～ 72	-	-	-	1.5 ～ 5	2.2 ～ 50	10 ～ 100	0.6 ～ 7.5	3 ～ 60	-	-	-	-	-	-	-	14 ～ 68	-	-	-	-	-	20 ～ 85	6 ～ 160.8	-	-	14 ～ 21	-	5.8 ～ 7.8	48 ～ 120	-
Shank diameter (d)(mm)	4	4 ～ 20	3 ～ 20	3 ～ 25	3 ～ 25	4 ～ 12	4 ～ 12	4 ～ 16	6	4 ～ 6	4 ～ 20	3	4 ～ 25	3 ～ 20	6 ～ 12	3	6 ～ 12	4 ～ 12	4	4 ～ 25	4 ～ 32	4 ～ 12	4 ～ 12	4 ～ 25	4 ～ 20	3 ～ 6	6	4 ～ 12	4 ～ 16	6	4 ～ 12	6 ～ 12	4 ～ 16	4 ～ 12	3	4	6 ～ 16	6 ～ 20	6 ～ 20	6 ～ 12	6 ～ 25	4 ～ 32	5 ～ 18	10 ～ 42	6 ～ 10
Number of flutes(sheet)	1	2	2	2	2	2	2	2	3	2	4	2	2	2	4	2	2	2	2	2	2	2	2	2	2	2	2	2	2	2	2	4	2	2	2	2	3	3	3	3	2	2	2	2	2
Overall Length (L)(mm)	50	40 ～ 160	45 ～ 200	40 ～ 180	70 ～ 280	50 ～ 100	50 ～ 110	50 ～ 140	60 ～ 80	50 ～ 80	50 ～ 150	40	40 ～ 180	40 ～ 160	60 ～ 110	40	50 ～ 80	40 ～ 60	50	40 ～ 180	80 ～ 230	50 ～ 110	60 ～ 120	120 ～ 250	40 ～ 105	45 ～ 100	60 ～ 90	40 ～ 65	100 ～ 250	40	50 ～ 110	50 ～ 80	50 ～ 140	80 ～ 200	40	50	70 ～ 160	60 ～ 220	60 ～ 200	60 ～ 120	80 ～ 230	140 ～ 250	120 ～ 180	120 ～ 240	50 ～ 100
work material	general steel[○] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[◎] / High Hardness Steel-HRC60[◎] / High Hardness Steel-HRC65[◎] / Stainless Steel[○]	general steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[○] / Stainless Steel[◎] / Cast Iron[◎] / Aluminum[○] / Titanium[○] / Copper[◎]	-	general steel[○] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○]	general steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○]	general steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[◎] / High Hardness Steel-HRC60[◎] / High Hardness Steel-HRC65[◎] / Stainless Steel[○] / Aluminum[○] / Titanium[◎] / Copper[○] / Resin[○]	general steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[◎] / Stainless Steel[◎] / Aluminum[◎] / Titanium[○] / Copper[◎] / Resin[◎]	general steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○]	general steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[◎] / High Hardness Steel-HRC60[◎] / High Hardness Steel-HRC65[◎] / Stainless Steel[○] / Aluminum[○] / Titanium[◎] / Copper[○] / Resin[○]	general steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[◎] / Stainless Steel[◎] / Aluminum[◎] / Titanium[○] / Copper[◎] / Resin[◎]	-	general steel[○] / Quenched and tempered steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○]	general steel[◎] / Quenched and tempered steel[○] / High Hardness Steel-HRC55[○] / Stainless Steel[○] / Cast Iron[◎] / Copper[○]	general steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[○] / Stainless Steel[○] / Cast Iron[◎] / Aluminum[◎] / Copper[○/◎] / Resin[○]	general steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○]	Aluminum[○] / Copper[◎] / Resin[◎]	Aluminum[○] / Copper[◎] / Resin[◎]	-	general steel[○] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[◎] / High Hardness Steel-HRC60[◎] / High Hardness Steel-HRC65[◎]	general steel[○] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[◎] / High Hardness Steel-HRC60[◎] / High Hardness Steel-HRC65[◎] / Stainless Steel[○] / Cast Iron[◎]	general steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[◎] / High Hardness Steel-HRC60[◎] / Stainless Steel[◎] / Cast Iron[○] / Titanium[○]	High Hardness Steel-HRC55[◎] / High Hardness Steel-HRC60[◎] / High Hardness Steel-HRC65[◎]	Aluminum[◎] / Resin[○]	Aluminum[◎] / Copper[◎] / Graphite[◎]	general steel[○] / Quenched and tempered steel[○] / Stainless Steel[○] / Aluminum[◎] / Resin[◎]	Aluminum[◎] / Resin[◎]	general steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○]	general steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○]	general steel[○] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○]	general steel[○] / Quenched and tempered steel[○] / High Hardness Steel-HRC55[◎] / High Hardness Steel-HRC60[◎] / High Hardness Steel-HRC65[◎] / Stainless Steel[○] / Cast Iron[◎]	Aluminum[◎] / Copper[○] / Graphite[○] / Resin[○]	Aluminum[○] / Copper[○] / Graphite[◎] / Resin[○]	general steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[○] / Stainless Steel[○] / Cast Iron[◎] / Aluminum[◎] / Copper[◎] / Resin[○]	Aluminum[○] / Graphite[◎] / Resin[◎]	general steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[◎] / High Hardness Steel-HRC60[○] / Stainless Steel[◎] / Cast Iron[◎] / Aluminum[○] / Titanium[○] / Copper[○]	general steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[◎] / High Hardness Steel-HRC60[○] / Stainless Steel[◎] / Cast Iron[◎] / Aluminum[○] / Titanium[○] / Copper[○]	general steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[◎] / High Hardness Steel-HRC60[○] / High Hardness Steel-HRC65[○]	general steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[◎] / High Hardness Steel-HRC60[○] / Stainless Steel[○] / Cast Iron[○]	general steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[◎] / High Hardness Steel-HRC60[○] / Stainless Steel[○] / Cast Iron[○]	general steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[◎] / Stainless Steel[◎] / Aluminum[◎] / Titanium[○] / Copper[◎] / Resin[◎]	general steel[◎] / Quenched and tempered steel[◎] / Stainless Steel[○] / Cast Iron[◎] / Aluminum[○] / Titanium[○]	general steel[○] / Quenched and tempered steel[○] / Graphite[○]	general steel[○/◎] / Quenched and tempered steel[○/◎] / High Hardness Steel-HRC55[○] / High Hardness Steel-HRC60[○] / High Hardness Steel-HRC65[○] / Stainless Steel[○] / Cast Iron[○/◎] / Aluminum[○] / Titanium[○] / Copper[○]	-	general steel[○] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[○] / Cast Iron[○]
R Precision(μm)	-	-0.007 to 0.003 ～ ±0.01	±0.005	±0.01	-0.007 ~ +0.003 ～ ±0.01	0.005～-0.005 ～ 0.01～-0.01	0.005～-0.005 ～ 0.01～-0.01	-0.007 ~ +0.003 ～ ±0.01	0.01～-0.01	0.002～-0.002	±0.005	-	-	-0.007 ~ +0.003 ～ ±0.01	±0.01	-0.01～+0.01	-0.01～+0.01	±0.005	±0.005	±5 ～ ±10	0～-0.04 ～ 0～-0.03	-	0.01～-0.01	±0.02	±0.01	＋0.01～－0.01	-0.005 ~ +0.001 ～ ±0.003	-0.007 ~ +0.003 ～ ±0.005	±0.01	-0.005 ~ +0.001 ～ ±0.003	±0.01	±0.01	-0.007 ~ +0.003 ～ ±0.01	-0.01～+0.01	-0.01～+0.01	-0.01～+0.01	-0.015～+0.015	-	-0.01～+0.01	0.01～-0.01	-	-	10～-10	-	-
Machining Application	Curved surface / Side / Engraving / R Groove	Curved surface / Side / Engraving / R Groove	-	Curved surface / Side / Engraving / R Groove	Curved surface / Side / Engraving / R Groove	Curved surface / Side / Engraving / R Groove	Curved surface / R Groove	Curved surface / Side / Engraving / R Groove	Curved surface / Side / Engraving / R Groove	Curved surface / Side / Engraving / R Groove	-	Curved surface / Side / Engraving / R Groove	Curved surface / Side / Engraving / R Groove	Curved surface / Side / Engraving / R Groove	Curved surface / Side / Engraving / R Groove	Curved surface / Side / Engraving / R Groove	Curved surface / Side / Engraving / R Groove	-	Curved surface / Side / Engraving / R Groove	Curved surface / Side / Engraving / R Groove	Curved surface / Side / Engraving / R Groove	Curved surface / Side / Engraving / R Groove	Curved surface / R Groove	Curved surface / Side / Engraving / R Groove	Curved surface / Side / Engraving / R Groove	Curved surface / Side / Engraving / R Groove	Curved surface / Side / Engraving / R Groove	Curved surface / Side / Engraving / R Groove	Curved surface / Side / Engraving / R Groove	Curved surface / Side / Engraving / R Groove	Curved surface / Side / Engraving / R Groove	Curved surface / Side / Engraving / R Groove	Curved surface / Side / Engraving / R Groove	Curved surface / Side / Engraving / R Groove	Curved surface / Side / Engraving / R Groove	Curved surface / Side / Engraving / R Groove	Curved surface / Side / Engraving / R Groove	Curved surface / Side / Engraving / R Groove	Curved surface / Side / Engraving / R Groove	Curved surface / Side / Engraving / R Groove	Curved surface / Engraving / R Groove	Curved surface / Engraving / R Groove	Curved surface / R Groove	Curved surface / Engraving / R Groove	Curved surface / Side / Engraving / R Groove
Coating	Non-Coated	For General Steels (AlCrN, etc.)	TiSiN	TiAlN	For High Hardness (Silicon Group)	For High Hardness (Silicon Group)	TiAlN	For High Hardness (Silicon Group)	For High Hardness (Silicon Group)	TiAlN	TiSiN	Non-Coated	FX	For General Steels (AlCrN, etc.)	For High Hardness (Silicon Group)	CrN	CrN	TiSiN	Non-Coated	For High Hardness (Silicon Group)	TiAlN	TiAlN	Non-Coated	-	Non-Coated	-	For High Hardness (Silicon Group)	For High Hardness (Silicon Group)	TiAlN	For High Hardness (Silicon Group)	Non-Coated	Dia Coat	For General Steels (AlCrN, etc.)	DG	TiAlN	TiAlN	TiAlN	For High Hardness (Silicon Group)	TiAlN	TiAlN	TiAlN	Non-Coated	TiAlN	Non-Coated	Y coating
Type	Ball	Ball	Ball	Ball	Ball	Ball	Ball	Ball	Ball	Ball	Ball	Ball	Ball	Ball	Ball	Ball	Ball	Ball	Ball	Ball	Ball	Ball	Ball	Ball	Ball	Ball	Ball	Ball	Ball	Ball	Ball	Ball	Ball	Ball	Ball	Ball	Ball	Ball	Ball	Ball	Ball	Ball	Ball	Ball	Ball

Loading...Tải…