Long Neck Square End Mills (Carbide)（Coating：Non-Coated）

• You can add up to 6 items per a category to the compare list. Compare

  

  RSE230 End Mill for Resin Clear Cut

  NS TOOL

  [Notice] Alterations can now be specified. Please select from "Standard/Alterations Category" of narrowing conditions.[Features]・ Three × D flute length, 5 × D flute length, 10 × D flute length, super long neck, same diameter type, selectable according to the shape to be machined.・ Can also be used for non-ferrous materials such as aluminum and copper.・ Available in a total of 135 sizes.

  Blade diameter (D)(φ)	Blade length (ℓ)(mm)	Underneck length (ℓ1)(mm)	Shank diameter (d)(mm)	Number of flutes(sheet)	Overall Length (L)(mm)	work material	Torsion Angle (θ)	Machining Application	Coating	Blade tip shape	Type
  0.1 ～ 6	0.3 ～ 50	0.8 ～ 80	3 ～ 6	2	45 ～ 130	Aluminum[◎] / Copper[◎] / Resin[◎]	Standard torsion (30-40°)	Plane / Side / Groove / Inclined Cuts	Non-Coated	Sharp Edge	Long-Neck Square

  From: 623,404 VND
  Days to Ship: Số ngày giao hàng: Same day or more

  Same day or more

• You can add up to 6 items per a category to the compare list. Compare

  

  NHR-2 Long Neck End Mill (for Deep Ribs)

  NS TOOL

  [Notice] Alterations can now be specified. Please select from "Standard/Alterations Category" of narrowing conditions.[Features]・ Neck relief type suitable for narrow and deep machining

  Blade diameter (D)(φ)	Blade length (ℓ)(mm)	Underneck length (ℓ1)(mm)	Shank diameter (d)(mm)	Number of flutes(sheet)	Overall Length (L)(mm)	work material	Torsion Angle (θ)	Machining Application	Coating	Blade tip shape	Type
  0.5 ～ 5	0.7 ～ 7.5	2 ～ 40	3 ～ 6	2	35 ～ 90	general steel[◎] / Quenched and tempered steel[◎] / Stainless Steel[◎] / Aluminum[◎] / Copper[◎] / Resin[◎]	Standard torsion (30-40°) / Powerful Torsion (45°-60°)	Plane / Side / Groove / Inclined Cuts	Non-Coated	With Lead	Long-Neck Square

  From: 1,011,335 VND
  Days to Ship: Số ngày giao hàng: 6 Day(s) or more

  6 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Carbide Long Neck Square End Mill for Resin Machining, 2-Flute / Stub, Long Neck Model

  MISUMI

  End mill for resin that's capable of deep engraving

  • Volume Discount

  • Non-Coated
  • Resin
  • 2 Flutes
  • B (Stub)

  Blade diameter (D)(φ)	Blade length (ℓ)(mm)	Underneck length (ℓ1)(mm)	Shank diameter (d)(mm)	Number of flutes(sheet)	Overall Length (L)(mm)	work material	Torsion Angle (θ)	Machining Application	Coating	Blade tip shape	Type
  0.3 ～ 6	0.6 ～ 15	2.5 ～ 52	3 ～ 6	2	50 ～ 80	Aluminum[○] / Copper[○] / Graphite[○] / Resin[◎]	Standard torsion (30-40°)	Plane / Side / Groove / Inclined Cuts	Non-Coated	Sharp Edge	Long-Neck Square

  From: 635,994 VND
  Days to Ship: Số ngày giao hàng: 4 Day(s) or more

  4 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  AZS 3-Flute Long Neck Square for Aluminum Processing [Alteration Supported Product]

  UNION TOOL

  [Features]· Z-cutting is possible on solid workpieces, reducing pilot hole drilling process time· Adopts a 45° torsion angle to achieve excellent chip discharge performance· The blade shape dedicated for aluminum greatly suppresses the generation of burrs· Tip chipping has been greatly reduced by adopting a micro flat land

  Blade diameter (D)(φ)	Blade length (ℓ)(mm)	Underneck length (ℓ1)(mm)	Shank diameter (d)(mm)	Number of flutes(sheet)	Overall Length (L)(mm)	work material	Torsion Angle (θ)	Machining Application	Coating	Blade tip shape	Type
  1 ～ 12	2 ～ 24	3 ～ 50	4 ～ 12	3	60 ～ 110	Aluminum[◎] / Copper[○] / Resin[○]	Powerful Torsion (45°-60°)	Plane / Side / Groove / Plunging (Z feed) / Inclined Cuts	Non-Coated	With Lead	Long-Neck Square

  From: 843,336 VND
  Days to Ship: Số ngày giao hàng: 6 Day(s) or more

  6 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  CPR 2-Flute Long Neck Square for Resin Machining [Alteration Supported Product]

  UNION TOOL

  [Features]· Long Neck End Mill for Resin Processing· Ideal for deep grooving thanks to the undercut processing of the neck part

  Blade diameter (D)(φ)	Blade length (ℓ)(mm)	Underneck length (ℓ1)(mm)	Shank diameter (d)(mm)	Number of flutes(sheet)	Overall Length (L)(mm)	work material	Torsion Angle (θ)	Machining Application	Coating	Blade tip shape	Type
  0.5 ～ 6	1 ～ 12	2 ～ 63	3 ～ 6	2	38 ～ 120	Aluminum[○] / Copper[◎] / Resin[◎]	Standard torsion (30-40°)	Plane / Side / Groove / Inclined Cuts	Non-Coated	Sharp Edge / With Lead	Long-Neck Square

  From: 728,059 VND
  Days to Ship: Số ngày giao hàng: 6 Day(s) or more

  6 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  CAS, 2-Flutes Square for Aluminum Processing [Alteration Supported Product]

  UNION TOOL

  [Features]· End Mill for Aluminum Machining· Adopts 45° torsion for a blade shape with excellent sharpness and chip discharge

  Blade diameter (D)(φ)	Blade length (ℓ)(mm)	Underneck length (ℓ1)(mm)	Shank diameter (d)(mm)	Number of flutes(sheet)	Overall Length (L)(mm)	work material	Torsion Angle (θ)	Machining Application	Coating	Blade tip shape	Type
  0.5 ～ 12	0.75 ～ 30	-	4 ～ 12	2	45 ～ 90	Aluminum[◎] / Copper[○]	Powerful Torsion (45°-60°)	Plane / Side / Groove / Inclined Cuts	Non-Coated	With Lead	Square

  From: 513,634 VND
  Days to Ship: Số ngày giao hàng: 6 Day(s) or more

  6 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  CGE, for Graphite Processing, 4-Flute Square [Alternation Supported Product]

  UNION TOOL

  [Features]· End Mill Dedicated for Graphite Machining· Adopts a carbide base material with excellent wear resistance· The shape helps prevent chipping

  Blade diameter (D)(φ)	Blade length (ℓ)(mm)	Underneck length (ℓ1)(mm)	Shank diameter (d)(mm)	Number of flutes(sheet)	Overall Length (L)(mm)	work material	Torsion Angle (θ)	Machining Application	Coating	Blade tip shape	Type
  2 ～ 20	15 ～ 70	-	3 ～ 20	4	60 ～ 200	Aluminum[○] / Copper[○] / Graphite[◎] / Resin[○]	Powerful Torsion (45°-60°)	Plane / Side / Groove / Inclined Cuts	Non-Coated	Sharp Edge	Square

  From: 2,344,307 VND
  Days to Ship: Số ngày giao hàng: 6 Day(s) or more

  6 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  CPS 2-Flute Square for Resin Machining [Alteration Supported Product]

  UNION TOOL

  [Features]· Medium Blade Length End Mill for Resin Processing· Unique blade shape· Blade Length = 3x Outer Diameter (Some 1.5x/2x)· An excellent machined surface can be obtained, even for long resin protrusion machining

  Blade diameter (D)(φ)	Blade length (ℓ)(mm)	Underneck length (ℓ1)(mm)	Shank diameter (d)(mm)	Number of flutes(sheet)	Overall Length (L)(mm)	work material	Torsion Angle (θ)	Machining Application	Coating	Blade tip shape	Type
  0.3 ～ 12	0.9 ～ 36	-	3 ～ 12	2	45 ～ 100	Aluminum[○] / Copper[◎] / Resin[◎]	Standard torsion (30-40°)	Plane / Side / Groove / Inclined Cuts	Non-Coated	With Lead	Square

  From: 563,011 VND
  Days to Ship: Số ngày giao hàng: 6 Day(s) or more

  6 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  CPRL 2-Flute Long Neck, Long Shank Square for Resin Machining [Alteration Supported Product]

  UNION TOOL

  [Features]· Long Neck / Long Shank Square End Mill for Resin Processing· Adopts a long shank to support deep groove machining of objects with long projections· Exhibits excellent sharpness in resin processing

  Blade diameter (D)(φ)	Blade length (ℓ)(mm)	Underneck length (ℓ1)(mm)	Shank diameter (d)(mm)	Number of flutes(sheet)	Overall Length (L)(mm)	work material	Torsion Angle (θ)	Machining Application	Coating	Blade tip shape	Type
  0.5 ～ 4	1 ～ 8	4 ～ 40	4 ～ 6	2	80 ～ 100	Aluminum[○] / Copper[◎] / Resin[◎]	Standard torsion (30-40°)	Plane / Side / Groove / Inclined Cuts	Non-Coated	Sharp Edge / With Lead	Long-Neck Square

  From: 859,861 VND
  Days to Ship: Số ngày giao hàng: 6 Day(s) or more

  6 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  BED2L Brazed Long Square End Mill, 2-Flute, Non-Coated

  OKAZAKI SEIKO

  The ultra fine particle insert (Z-10) enables a wide range of machining from cast iron to steel.

  Blade diameter (D)(φ)	Blade length (ℓ)(mm)	Underneck length (ℓ1)(mm)	Shank diameter (d)(mm)	Number of flutes(sheet)	Overall Length (L)(mm)	work material	Torsion Angle (θ)	Machining Application	Coating	Blade tip shape	Type
  20 ～ 50	55 ～ 125	-	20 ～ 42	2	140 ～ 240	general steel[○] / Quenched and tempered steel[○] / Cast Iron[○] / Aluminum[○]	Standard torsion (30-40°)	Plane / Groove	Non-Coated	C plane	Long-Neck Square

  From: 8,082,026 VND
  Days to Ship: Số ngày giao hàng: 10 Day(s) or more

  10 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  BPD4L Brazed Long Square End Mill, 4-Flute, Non-Coated

  OKAZAKI SEIKO

  The ultra fine particle insert (Z-10) enables a wide range of machining from cast iron to steel.

  Blade diameter (D)(φ)	Blade length (ℓ)(mm)	Underneck length (ℓ1)(mm)	Shank diameter (d)(mm)	Number of flutes(sheet)	Overall Length (L)(mm)	work material	Torsion Angle (θ)	Machining Application	Coating	Blade tip shape	Type
  20 ～ 50	55 ～ 125	-	20 ～ 42	4	140 ～ 240	general steel[○] / Quenched and tempered steel[○] / Cast Iron[○] / Aluminum[○]	Standard torsion (30-40°)	Plane / Side	Non-Coated	C plane	Long-Neck Square

  From: 8,172,865 VND
  Days to Ship: Số ngày giao hàng: 10 Day(s) or more

  10 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  BPD4U Brazed Extra-Long Square End Mill, 4-Flute, Non-Coated

  OKAZAKI SEIKO

  The ultra fine particle insert (Z-10) enables a wide range of machining from cast iron to steel.

  Blade diameter (D)(φ)	Blade length (ℓ)(mm)	Underneck length (ℓ1)(mm)	Shank diameter (d)(mm)	Number of flutes(sheet)	Overall Length (L)(mm)	work material	Torsion Angle (θ)	Machining Application	Coating	Blade tip shape	Type
  20 ～ 50	85 ～ 150	-	25 ～ 42	4	185 ～ 265	general steel[○] / Quenched and tempered steel[○] / Cast Iron[○] / Aluminum[○]	Standard torsion (30-40°)	Plane / Side	Non-Coated	C plane	Long-Neck Square

  From: 11,240,641 VND
  Days to Ship: Số ngày giao hàng: 10 Day(s) or more

  10 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  SED2L Long Square End Mill, 2-Flute, Non-Coated

  OKAZAKI SEIKO

  SED2L, Long Square End Mill, 2-Flute, Uncoated·The long type allows deep cavity milling.·Sharp helix angle (45 to 60°)

  Blade diameter (D)(φ)	Blade length (ℓ)(mm)	Underneck length (ℓ1)(mm)	Shank diameter (d)(mm)	Number of flutes(sheet)	Overall Length (L)(mm)	work material	Torsion Angle (θ)	Machining Application	Coating	Blade tip shape	Type
  3 ～ 20	15 ～ 80	-	6 ～ 20	2	70 ～ 150	general steel[◎] / Quenched and tempered steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○]	Standard torsion (30-40°)	Plane / Side / Groove	Non-Coated	Sharp Edge	Long-Neck Square

  From: 1,224,545 VND
  Days to Ship: Số ngày giao hàng: 6 Day(s) or more

  6 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Carbide Long Blade End Mill KSEL-2

  KYOWA SEIKO

  Carbide long flute length end mill, KSEL-2·An end mill with 4 to 12 times flute length.·Helix angle: Standard helix angle (30 to 44°)

  Blade diameter (D)(φ)	Blade length (ℓ)(mm)	Underneck length (ℓ1)(mm)	Shank diameter (d)(mm)	Number of flutes(sheet)	Overall Length (L)(mm)	work material	Torsion Angle (θ)	Machining Application	Coating	Blade tip shape	Type
  0.1 ～ 6	0.3 ～ 60	-	3 ～ 6	2	40 ～ 100	general steel[○] / Quenched and tempered steel[○] / Aluminum[○]	Standard torsion (30-40°)	Plane / Side / Groove / Plunging (Z feed) / Inclined Cuts / Countersinking	Non-Coated	-	Square

  From: 1,446,282 VND
  Days to Ship: Số ngày giao hàng: 6 Day(s) or more

  6 Day(s) or more

BrandNhãn hiệu
Product SeriesDòng sản phẩm
From
Days to ShipSố ngày giao hàng
SpecificationsĐặc điểm kĩ thuật
Blade diameter (D)(φ)
Blade length (ℓ)(mm)
Underneck length (ℓ1)(mm)
Shank diameter (d)(mm)
Number of flutes(sheet)
Overall Length (L)(mm)
work material
Torsion Angle (θ)
Machining Application
Coating
Blade tip shape
Type

	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare
BrandNhãn hiệu	NS TOOL	NS TOOL	MISUMI	UNION TOOL	UNION TOOL	UNION TOOL	UNION TOOL	UNION TOOL	UNION TOOL	OKAZAKI SEIKO	OKAZAKI SEIKO	OKAZAKI SEIKO	OKAZAKI SEIKO	KYOWA SEIKO
Product SeriesDòng sản phẩm	RSE230 End Mill for Resin Clear Cut	NHR-2 Long Neck End Mill (for Deep Ribs)	Carbide Long Neck Square End Mill for Resin Machining, 2-Flute / Stub, Long Neck Model	AZS 3-Flute Long Neck Square for Aluminum Processing [Alteration Supported Product]	CPR 2-Flute Long Neck Square for Resin Machining [Alteration Supported Product]	CAS, 2-Flutes Square for Aluminum Processing [Alteration Supported Product]	CGE, for Graphite Processing, 4-Flute Square [Alternation Supported Product]	CPS 2-Flute Square for Resin Machining [Alteration Supported Product]	CPRL 2-Flute Long Neck, Long Shank Square for Resin Machining [Alteration Supported Product]	BED2L Brazed Long Square End Mill, 2-Flute, Non-Coated	BPD4L Brazed Long Square End Mill, 4-Flute, Non-Coated	BPD4U Brazed Extra-Long Square End Mill, 4-Flute, Non-Coated	SED2L Long Square End Mill, 2-Flute, Non-Coated	Carbide Long Blade End Mill KSEL-2
From	623,404 VND	1,011,335 VND	635,994 VND	843,336 VND	728,059 VND	513,634 VND	2,344,307 VND	563,011 VND	859,861 VND	8,082,026 VND	8,172,865 VND	11,240,641 VND	1,224,545 VND	1,446,282 VND
Days to ShipSố ngày giao hàng	Same day or more	6 Day(s) or more	4 Day(s) or more	6 Day(s) or more	6 Day(s) or more	6 Day(s) or more	6 Day(s) or more	6 Day(s) or more	6 Day(s) or more	10 Day(s) or more	10 Day(s) or more	10 Day(s) or more	6 Day(s) or more	6 Day(s) or more
SpecificationsĐặc điểm kĩ thuật			Non-Coated Resin 2 Flutes B (Stub)
Blade diameter (D)(φ)	0.1 ～ 6	0.5 ～ 5	0.3 ～ 6	1 ～ 12	0.5 ～ 6	0.5 ～ 12	2 ～ 20	0.3 ～ 12	0.5 ～ 4	20 ～ 50	20 ～ 50	20 ～ 50	3 ～ 20	0.1 ～ 6
Blade length (ℓ)(mm)	0.3 ～ 50	0.7 ～ 7.5	0.6 ～ 15	2 ～ 24	1 ～ 12	0.75 ～ 30	15 ～ 70	0.9 ～ 36	1 ～ 8	55 ～ 125	55 ～ 125	85 ～ 150	15 ～ 80	0.3 ～ 60
Underneck length (ℓ1)(mm)	0.8 ～ 80	2 ～ 40	2.5 ～ 52	3 ～ 50	2 ～ 63	-	-	-	4 ～ 40	-	-	-	-	-
Shank diameter (d)(mm)	3 ～ 6	3 ～ 6	3 ～ 6	4 ～ 12	3 ～ 6	4 ～ 12	3 ～ 20	3 ～ 12	4 ～ 6	20 ～ 42	20 ～ 42	25 ～ 42	6 ～ 20	3 ～ 6
Number of flutes(sheet)	2	2	2	3	2	2	4	2	2	2	4	4	2	2
Overall Length (L)(mm)	45 ～ 130	35 ～ 90	50 ～ 80	60 ～ 110	38 ～ 120	45 ～ 90	60 ～ 200	45 ～ 100	80 ～ 100	140 ～ 240	140 ～ 240	185 ～ 265	70 ～ 150	40 ～ 100
work material	Aluminum[◎] / Copper[◎] / Resin[◎]	general steel[◎] / Quenched and tempered steel[◎] / Stainless Steel[◎] / Aluminum[◎] / Copper[◎] / Resin[◎]	Aluminum[○] / Copper[○] / Graphite[○] / Resin[◎]	Aluminum[◎] / Copper[○] / Resin[○]	Aluminum[○] / Copper[◎] / Resin[◎]	Aluminum[◎] / Copper[○]	Aluminum[○] / Copper[○] / Graphite[◎] / Resin[○]	Aluminum[○] / Copper[◎] / Resin[◎]	Aluminum[○] / Copper[◎] / Resin[◎]	general steel[○] / Quenched and tempered steel[○] / Cast Iron[○] / Aluminum[○]	general steel[○] / Quenched and tempered steel[○] / Cast Iron[○] / Aluminum[○]	general steel[○] / Quenched and tempered steel[○] / Cast Iron[○] / Aluminum[○]	general steel[◎] / Quenched and tempered steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○]	general steel[○] / Quenched and tempered steel[○] / Aluminum[○]
Torsion Angle (θ)	Standard torsion (30-40°)	Standard torsion (30-40°) / Powerful Torsion (45°-60°)	Standard torsion (30-40°)	Powerful Torsion (45°-60°)	Standard torsion (30-40°)	Powerful Torsion (45°-60°)	Powerful Torsion (45°-60°)	Standard torsion (30-40°)	Standard torsion (30-40°)	Standard torsion (30-40°)	Standard torsion (30-40°)	Standard torsion (30-40°)	Standard torsion (30-40°)	Standard torsion (30-40°)
Machining Application	Plane / Side / Groove / Inclined Cuts	Plane / Side / Groove / Inclined Cuts	Plane / Side / Groove / Inclined Cuts	Plane / Side / Groove / Plunging (Z feed) / Inclined Cuts	Plane / Side / Groove / Inclined Cuts	Plane / Side / Groove / Inclined Cuts	Plane / Side / Groove / Inclined Cuts	Plane / Side / Groove / Inclined Cuts	Plane / Side / Groove / Inclined Cuts	Plane / Groove	Plane / Side	Plane / Side	Plane / Side / Groove	Plane / Side / Groove / Plunging (Z feed) / Inclined Cuts / Countersinking
Coating	Non-Coated	Non-Coated	Non-Coated	Non-Coated	Non-Coated	Non-Coated	Non-Coated	Non-Coated	Non-Coated	Non-Coated	Non-Coated	Non-Coated	Non-Coated	Non-Coated
Blade tip shape	Sharp Edge	With Lead	Sharp Edge	With Lead	Sharp Edge / With Lead	With Lead	Sharp Edge	With Lead	Sharp Edge / With Lead	C plane	C plane	C plane	Sharp Edge	-
Type	Long-Neck Square	Long-Neck Square	Long-Neck Square	Long-Neck Square	Long-Neck Square	Square	Square	Square	Long-Neck Square	Long-Neck Square	Long-Neck Square	Long-Neck Square	Long-Neck Square	Square

Loading...Tải…