USB-Compatible N Series Insulation-Type Digital I/O Unit

Product Description

With compact design, installation on floor and walls and installation on DIN rail mounting brackets is in the panel or in the unit where there is not much flexibility with the installation location.

[Features]
· Has 8 points of photo coupler isolated input (corresponding to current sink output/current source output) with response speed of 200 μsec. 12-24VDC current sink/source output supported. Input is a common configuration of 8 points.
· Has independent common relay output (c contact) 8 points.
· Because it is an independent common, it can support different external power supplies for one point (one common) unit.
· The output rating is designed to have a maximum capacity of 6A240VAC, 5A28VDC maximum per point.
· Because the USB (computer) and the input / output interface are isolated by photo coupler and relay, it is excellent for noise reduction.
· You can not choose an installation place with a 188.0 (W) × 78.0 (D) × 30.5 (H) concept design.
· Wiring is easy with a terminal connector (screw type).
· USB1. 1/USB USB2 standard, high speed transfer at HighSpeed (480Mbps) is possible
· It can be installed on the floor/wall/ceiling etc. with screw fastening, magnets, rubber feet etc. Moreover, since the DIN rail attachment mechanism comes as standard on the main body, it can be easily installed in the panel or in the device.
· By using the digital input/output driver API-DIO (WDM), you can create Windows applications. We also provide diagnostic programs that can check the hardware's operation.
· You can create LabVIEW applications by using the special library VI-DAQ.
· In addition to components that can easily control digital input/output devices, it is a measurement system development support tool complete with a software collection (various graphs, switches, lamps etc) specialized for measurement applications. Further, since a practical example collection (application program) such as a digital monitor which can confirm the input/output display of data is available, computer measurements can be started immediately without the program.