(!) Since support from Microsoft will end on January 14th, 2020, Windows 7 will be excluded from the recommended environment from December 15th, 2019 on this site. Vì lý do Microsoft kết thúc hỗ trợ cho Windows 7 vào ngày 14/01/2020, Windows 7 sẽ là hệ điều hành không được khuyến khích sử dụng với trang web này từ ngày 15/12/2019.
Tel: 0222-361-1555
Email: [email protected]
8:00 - 17:00 (Mon - Sat)
Search by Category / Brand Tìm theo danh mục, nhãn hiệu
Search by Category Tìm theo danh mục
- [Thông báo] Cập nhật địa chỉ kho tập kết hàng hóa tại khu vực miền Nam của MISUMI Việt Nam. Xem chi tiết.
[Announcement] Update on warehouse address in the Southern region of MISUIMI Vietnam. See more. - [Cảnh Báo] Thủ Đoạn Lừa Đảo Từ Nhân Viên Giao Hàng – Yêu Cầu Trả Phí Ship. Xem chi tiết.
[Warning] Fraud Calling from Shipper - Asking to Pay Shipping Fee. See more.
Product Detail
Cylinder (Tube) Inner Diameter
Stroke
Cushion
Operating Pressure
Specifications
Auto Switches
Lead Wire
The number of the switches
Type of Mount Support
Rod Tip Shape
Custom-made Specifications
type
Environment, Applications
CAD
Days to Ship
Specification/DimensionsĐặc điểm kỹ thuật / Kích thướcĐặc điểm kỹ thuật / Kích thước
-
Cylinder (Tube) Inner Diameter(Ø)
-
Stroke(mm)
-
Cushion
-
Operating Pressure(MPa)
-
Specifications
- Built-in magnet
- Without magnet
-
Auto Switches
-
Lead Wire
- 0.5
- 0.5 (M8 3-pin plug connector)
- 0.5 (M8 4-pin plug connector)
- 0.5 (M12 4-pin A-cord [normal-key] plug connector)
- 1
- 3
- 5
-
The number of the switches
-
Type of Mount Support
- Compact foot type
- Flange type
- Foot
- Through-Hole / Both Ends Tapped Common (Standard)
-
Rod Tip Shape
- Female rod end
- Male rod end
-
Custom-made Specifications
- Heat-resistant cylinder (-40 to 70°C)
- Heat-resistant cylinder (-10 to 150°C)
- Low-speed cylinder (5 to 50 mm/s)
- Extend the length of the rod tip 10 mm
- Low speed cylinder (10 to 50 mm/s)
- Change of piston rod end of double rod cylinder
- Fluoroelastomer seals
- Grease for food processing equipment
- Intermediate stroke (using dedicated body)
- Intermediate stroke of double rod cylinder
- None
- Piston rod, retaining ring, rod-end nut made of stainless steel
- With boss on rod side
-
type
- CDQSW
- CQSW
-
Environment, Applications
- Standard
- Low Speed
- Heat Resistant
-
CADCAD
- 2D
- 3D
Days to ShipSố ngày giao hàng
-
- Alltất cả các
- 4 Day(s) or Less
- 31 Day(s) or Less
- 32 Day(s) or Less
- 37 Day(s) or Less
Specify AlterationsChỉ định thay đổi
Compact Cylinder, Standard Type, Double Acting, Double Rod CQSW Series
You can add up to 6 items per a category to the compare list.
Part Number :
Copy Part Number URL to Clipboard
The part number URL has been copied into your clipboard.
-
- Order Qty :
-
-
- Price :
- ---
-
- Total Price :
- ---
-
- Days to ship :
- ---
Select part number to Order Now/ Add to Cart
(i)
Caution
thận trọng
- See catalog for specification details.
- Product pictures are representations. CAD data is not supported for some model numbers.
Similar Products
Product DetailProduct Description
Compact Cylinder, Standard Type, Double Acting, Double Rod that that is ideal for machine designs with small space requirements.
[Features]
· Square body shape that gives you flexibility for designing machines.
· 2-way basic mounting.
· Non-rotating rod with high non-rotating accuracy.
Compact Cylinder, Standard Type, Double Acting, Double Rod CQSW Series Details
Compact Cylinder, Standard Type, Double Acting, Double Rod CQSW Series product image
Compact Cylinder, Standard Type, Double Acting, Double Rod CQSW Series Specifications
Model Number Notation
Model number example
Individual Made-to-Order Specifications
| Indicator symbol | Specifications/contents |
|---|---|
| -X235 | Change of piston rod end of double rod cylinder |
| -X271 | Fluororubber seals |
| -X633 | Intermediate stroke of double rod cylinder |
Made to order specifications
| Indicator symbol | Specifications/contents |
|---|---|
| -XA□ | Change of rod-end shape |
| -XB6 | Heat-resistant cylinder (-10 to 150°C) without an auto switch |
| -XB7 | Cold-resistant cylinder (-40 to 70°C) without an auto switch |
| -XB9 | Low speed cylinder (10 to 50 mm/s) |
| -XB10 | Intermediate stroke (using exclusive body) |
| -XB13 | Low speed cylinder (5 to 50 mm/s) |
| -XC6 | Piston rod, retaining ring, rod-end nut made of stainless steel |
| -XC36 | With boss on rod side |
| -XC85 | Grease for food processing equipment |
Standard specification
| Tube Internal Diameter (mm) | 12 | 16 | 20 | 25 | |
|---|---|---|---|---|---|
| Operating method | Double acting, double rod | ||||
| Applicable fluids | Air | ||||
| Lubrication | Not required (non-lube) | ||||
| Proof pressure | 1.5 MPa | ||||
| Maximum operating pressure | 1.0 MPa | ||||
| Minimum operating pressure | 0.07 MPa | 0.05 MPa | |||
| Ambient and working fluid temperature | Without auto switch: -10°C to 70°C (No freezing) | ||||
| With auto switch: -10°C to 60°C (No freezing) | |||||
| Cushioning | None, rubber bumper | ||||
| Rod-end thread | Female thread | ||||
| Stroke length tolerance | +1.0 mm* 0 | ||||
| Operating piston speed | 50 to 500 mm/s | ||||
| Allowable kinetic energy J | Standard type | 0.022 | 0.038 | 0.055 | 0.09 |
| With rubber bumper | 0.043 | 0.075 | 0.11 | 0.18 | |
- *Stroke length tolerance does not include the amount of bumper change.
Structural drawing
Compact Cylinder, Standard Type, Double Acting, Double Rod CQSW Series Structural Drawing
Component Parts
| Number | Part name | Material | Note |
|---|---|---|---|
| 1 | Cylinder tube | Aluminum Alloy | Hard Anodize |
| 2 | Collar | Aluminum Alloy | Anodized |
| 3 | Piston | Aluminum Alloy | - |
| 4 | Piston rod A | Stainless steel | - |
| 5 | Piston rod B | Stainless steel | - |
| 6 | Retaining Ring | Carbon tool steel | Phosphate coated |
| 7 | Rod-end nut | Carbon steel | Zinc chromate |
| 8 | Dampers | Urethane | - |
| 9 | Spacer for switch | Aluminum Alloy | Chromate |
| 10 | Magnet | - | - |
| 11 | Rod Gasket | NBR | - |
| 12 | Piston Gasket | NBR | - |
| 13 | Tube gasket | NBR | - |
Replacement Parts / Seal Kit
| Tube Internal Diameter (mm) | Order number | Content |
|---|---|---|
| 12 | CQSWB12-PS | A set of (11), (12), (13) listed above |
| 16 | CQSWB16-PS | |
| 20 | CQSWB20-PS | |
| 25 | CQSWB25-PS |
- *Seal kit includes (11), (12) and (13). Order the seal kit based on each bore size.
- *The seal kit does not include a grease pack, so please order a grease pack separately.
Grease pack part number: GR-S-010 (10 g)
Compact Cylinder, Standard Type, Double Acting, Double Rod CQSW Series Example Dimensions
(Unit: mm)
Standard type (through-hole / both ends tapped common): CQSWB/CDQSWB dimensional drawing
Male rod end
(Unit: mm)
| Bore size (mm) | Without auto switch | With auto switch | B1 | C1 | H1 | L1 | MM | X |
|---|---|---|---|---|---|---|---|---|
| A1 | A1 | |||||||
| 12 | 50 | 55 | 8 | 9 | 4 | 14 | M5 × 0.8 | 10.5 |
| 16 | 53 | 58 | 10 | 10 | 5 | 15.5 | M6 × 1.0 | 12 |
| 20 | 63 | 73 | 13 | 12 | 5 | 18.5 | M8 × 1.25 | 14 |
| 25 | 74 | 84 | 17 | 15 | 6 | 22.5 | M10 × 1.25 | 17.5 |
Standard type
(Unit: mm)
| Bore size (mm) | Stroke range (mm) | Without auto switch | With auto switch | C | D | E | H | I | K | L | M | N | OA | OB | Q | RA | RB | T | ||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| A | B | A | B | |||||||||||||||||
| 12 | 5 to 30 | 29 | 22 | 34 | 27 | 6 | 6 | 25 | M3 × 0.5 | 32 | 5 | 3.5 | 15.5 | 3.5 | M4 × 0.7 | 6.5 | 7.5 | 7 | 4 | 0.5 |
| 16 | 5 to 30 | 29 | 22 | 34 | 27 | 8 | 8 | 29 | M4 × 0.7 | 38 | 6 | 3.5 | 20 | 3.5 | M4 × 0.7 | 6.5 | 7.5 | 7 | 4 | 0.5 |
| 20 | 5 to 50 | 35 | 26 | 45 | 36 | 7 | 10 | 36 | M5 × 0.8 | 47 | 8 | 4.5 | 25.5 | 5.4 | M6 × 1.0 | 9 | 8 | 10 | 7 | 1 |
| 25 | 5 to 50 | 39 | 29 | 49 | 39 | 12 | 12 | 40 | M6 × 1.0 | 52 | 10 | 5 | 28 | 5.4 | M6 × 1.0 | 9 | 9 | 10 | 7 | 1 |
- *Note 1) For the following bore/stroke sizes, the through-hole is threaded: Standard type: ø20 (20‑mm diameter), ø25 (25‑mm diameter) 5 stroke.
- *Note 2) Rubber bumper type has the same dimensions as those indicated above.
- *Note 3) The positions of the width across flats are not the same on both sides.
| Part Number | Price | Minimum Order Qty. | Volume Discount | Days to ShipSố ngày giao hàng | Cylinder (Tube) Inner Diameter (Ø) | Stroke (mm) | Environment, Applications | Cushion | Operating Pressure (MPa) | Specifications | Auto Switches | Lead Wire | The number of the switches | Type of Mount Support | Rod Tip Shape | Custom-made Specifications |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
- | 1 Piece(s) | Quote | 12 | 5 | Low Speed | None | 0.07 to 1.0 | Built-in magnet | Without switch | - | - | Through-Hole / Both Ends Tapped Common (Standard) | Female rod end | Low speed cylinder (10 to 50 mm/s) | ||
- | 1 Piece(s) | Quote | 12 | 5 | Low Speed | Rubber cushion | 0.07 to 1.0 | Built-in magnet | Without switch | - | - | Through-Hole / Both Ends Tapped Common (Standard) | Female rod end | Low speed cylinder (10 to 50 mm/s) | ||
- | 1 Piece(s) | Quote | 12 | 5 | Low Speed | Rubber cushion | 0.07 to 1.0 | Built-in magnet | Without switch | - | - | Through-Hole / Both Ends Tapped Common (Standard) | Male rod end | Low-speed cylinder (5 to 50 mm/s) | ||
- | 1 Piece(s) | Quote | 12 | 5 | Low Speed | None | 0.07 to 1.0 | Built-in magnet | M9NV | 0.5 | 2 | Through-Hole / Both Ends Tapped Common (Standard) | Male rod end | Low-speed cylinder (5 to 50 mm/s) | ||
- | 1 Piece(s) | Quote | 12 | 10 | Low Speed | None | 0.07 to 1.0 | Built-in magnet | M9BV | 0.5 | 2 | Through-Hole / Both Ends Tapped Common (Standard) | Female rod end | Low-speed cylinder (5 to 50 mm/s) | ||
- | 1 Piece(s) | Quote | 12 | 10 | Low Speed | None | 0.07 to 1.0 | Built-in magnet | Without switch | - | - | Through-Hole / Both Ends Tapped Common (Standard) | Female rod end | Low-speed cylinder (5 to 50 mm/s) | ||
- | 1 Piece(s) | Quote | 12 | 10 | Low Speed | Rubber cushion | 0.07 to 1.0 | Built-in magnet | Without switch | - | - | Through-Hole / Both Ends Tapped Common (Standard) | Male rod end | Low-speed cylinder (5 to 50 mm/s) | ||
- | 1 Piece(s) | Quote | 12 | 10 | Low Speed | None | 0.07 to 1.0 | Built-in magnet | A93 | 0.5 | 2 | Through-Hole / Both Ends Tapped Common (Standard) | Male rod end | Low speed cylinder (10 to 50 mm/s) | ||
- | 1 Piece(s) | Quote | 12 | 10 | Low Speed | None | 0.07 to 1.0 | Built-in magnet | A93 | 0.5 | 2 | Through-Hole / Both Ends Tapped Common (Standard) | Male rod end | Low-speed cylinder (5 to 50 mm/s) | ||
- | 1 Piece(s) | Quote | 12 | 15 | Low Speed | None | 0.07 to 1.0 | Built-in magnet | M9B | 0.5 | 2 | Through-Hole / Both Ends Tapped Common (Standard) | Male rod end | Low-speed cylinder (5 to 50 mm/s) | ||
- | 1 Piece(s) | Quote | 12 | 15 | Low Speed | None | 0.07 to 1.0 | Built-in magnet | Without switch | - | - | Through-Hole / Both Ends Tapped Common (Standard) | Male rod end | Low-speed cylinder (5 to 50 mm/s) | ||
- | 1 Piece(s) | Quote | 12 | 20 | Low Speed | None | 0.07 to 1.0 | Built-in magnet | Without switch | - | - | Through-Hole / Both Ends Tapped Common (Standard) | Female rod end | Low speed cylinder (10 to 50 mm/s) | ||
- | 1 Piece(s) | Quote | 12 | 20 | Low Speed | Rubber cushion | 0.07 to 1.0 | Built-in magnet | M9B | 3 | 2 | Through-Hole / Both Ends Tapped Common (Standard) | Male rod end | Low speed cylinder (10 to 50 mm/s) | ||
- | 1 Piece(s) | Quote | 12 | 25 | Low Speed | None | 0.07 to 1.0 | Built-in magnet | M9N | 0.5 | 2 | Through-Hole / Both Ends Tapped Common (Standard) | Male rod end | Low speed cylinder (10 to 50 mm/s) | ||
- | 1 Piece(s) | Quote | 12 | 30 | Low Speed | Rubber cushion | 0.07 to 1.0 | Built-in magnet | A93 | 0.5 | 2 | Through-Hole / Both Ends Tapped Common (Standard) | Male rod end | Low-speed cylinder (5 to 50 mm/s) | ||
- | 1 Piece(s) | Quote | 12 | 30 | Low Speed | None | 0.07 to 1.0 | Built-in magnet | M9N | 0.5 | 2 | Through-Hole / Both Ends Tapped Common (Standard) | Male rod end | Low speed cylinder (10 to 50 mm/s) | ||
- | 1 Piece(s) | Quote | 16 | 5 | Low Speed | Rubber cushion | 0.07 to 1.0 | Built-in magnet | Without switch | - | - | Through-Hole / Both Ends Tapped Common (Standard) | Female rod end | Low-speed cylinder (5 to 50 mm/s) | ||
- | 1 Piece(s) | Quote | 16 | 10 | Low Speed | Rubber cushion | 0.07 to 1.0 | Built-in magnet | M9BV | 0.5 | 2 | Through-Hole / Both Ends Tapped Common (Standard) | Female rod end | Low-speed cylinder (5 to 50 mm/s) | ||
- | 1 Piece(s) | Quote | 16 | 15 | Low Speed | Rubber cushion | 0.07 to 1.0 | Built-in magnet | Without switch | - | - | Through-Hole / Both Ends Tapped Common (Standard) | Female rod end | Low speed cylinder (10 to 50 mm/s) | ||
- | 1 Piece(s) | Quote | 16 | 15 | Low Speed | None | 0.07 to 1.0 | Built-in magnet | A93 | 0.5 | 2 | Through-Hole / Both Ends Tapped Common (Standard) | Male rod end | Low speed cylinder (10 to 50 mm/s) | ||
- | 1 Piece(s) | Quote | 16 | 20 | Low Speed | None | 0.07 to 1.0 | Built-in magnet | A93 | 0.5 | 2 | Through-Hole / Both Ends Tapped Common (Standard) | Female rod end | Low-speed cylinder (5 to 50 mm/s) | ||
- | 1 Piece(s) | Quote | 16 | 20 | Low Speed | None | 0.07 to 1.0 | Built-in magnet | A93 | 3 | 2 | Through-Hole / Both Ends Tapped Common (Standard) | Female rod end | Low-speed cylinder (5 to 50 mm/s) | ||
- | 1 Piece(s) | Quote | 16 | 20 | Low Speed | None | 0.07 to 1.0 | Built-in magnet | Without switch | - | - | Through-Hole / Both Ends Tapped Common (Standard) | Female rod end | Low-speed cylinder (5 to 50 mm/s) | ||
- | 1 Piece(s) | Quote | 16 | 20 | Low Speed | None | 0.07 to 1.0 | Built-in magnet | A90 | 0.5 | 2 | Through-Hole / Both Ends Tapped Common (Standard) | Male rod end | Low speed cylinder (10 to 50 mm/s) | ||
- | 1 Piece(s) | Quote | 16 | 20 | Low Speed | None | 0.07 to 1.0 | Built-in magnet | A90 | 0.5 | 2 | Through-Hole / Both Ends Tapped Common (Standard) | Male rod end | Low-speed cylinder (5 to 50 mm/s) | ||
- | 1 Piece(s) | Quote | 16 | 20 | Low Speed | None | 0.07 to 1.0 | Built-in magnet | A93 | 3 | 2 | Through-Hole / Both Ends Tapped Common (Standard) | Male rod end | Low speed cylinder (10 to 50 mm/s) | ||
- | 1 Piece(s) | Quote | 16 | 20 | Low Speed | None | 0.07 to 1.0 | Built-in magnet | A93V | 0.5 | 2 | Through-Hole / Both Ends Tapped Common (Standard) | Male rod end | Low-speed cylinder (5 to 50 mm/s) | ||
- | 1 Piece(s) | Quote | 16 | 25 | Low Speed | None | 0.07 to 1.0 | Built-in magnet | M9N | 0.5 | 2 | Through-Hole / Both Ends Tapped Common (Standard) | Female rod end | Low-speed cylinder (5 to 50 mm/s) | ||
- | 1 Piece(s) | Quote | 16 | 30 | Low Speed | None | 0.07 to 1.0 | Built-in magnet | M9N | 0.5 | 2 | Through-Hole / Both Ends Tapped Common (Standard) | Female rod end | Low-speed cylinder (5 to 50 mm/s) | ||
- | 1 Piece(s) | Quote | 16 | 30 | Low Speed | None | 0.07 to 1.0 | Built-in magnet | Without switch | - | - | Through-Hole / Both Ends Tapped Common (Standard) | Female rod end | Low-speed cylinder (5 to 50 mm/s) | ||
- | 1 Piece(s) | Quote | 16 | 30 | Low Speed | Rubber cushion | 0.07 to 1.0 | Built-in magnet | Without switch | - | - | Through-Hole / Both Ends Tapped Common (Standard) | Female rod end | Low-speed cylinder (5 to 50 mm/s) | ||
- | 1 Piece(s) | Quote | 16 | 30 | Low Speed | Rubber cushion | 0.07 to 1.0 | Built-in magnet | A93 | 0.5 | 2 | Through-Hole / Both Ends Tapped Common (Standard) | Male rod end | Low-speed cylinder (5 to 50 mm/s) | ||
- | 1 Piece(s) | Quote | 16 | 30 | Low Speed | Rubber cushion | 0.07 to 1.0 | Built-in magnet | Without switch | - | - | Through-Hole / Both Ends Tapped Common (Standard) | Male rod end | Low-speed cylinder (5 to 50 mm/s) | ||
- | 1 Piece(s) | Quote | 20 | 5 | Low Speed | None | 0.05 to 1.0 | Built-in magnet | M9BV | 0.5 | 1 | Through-Hole / Both Ends Tapped Common (Standard) | Female rod end | Low speed cylinder (10 to 50 mm/s) | ||
- | 1 Piece(s) | Quote | 20 | 5 | Low Speed | None | 0.05 to 1.0 | Built-in magnet | M9NV | 0.5 | 2 | Through-Hole / Both Ends Tapped Common (Standard) | Female rod end | Low speed cylinder (10 to 50 mm/s) | ||
- | 1 Piece(s) | Quote | 20 | 5 | Low Speed | None | 0.05 to 1.0 | Built-in magnet | M9NV | 0.5 | 1 | Through-Hole / Both Ends Tapped Common (Standard) | Female rod end | Low speed cylinder (10 to 50 mm/s) | ||
- | 1 Piece(s) | Quote | 20 | 5 | Low Speed | None | 0.05 to 1.0 | Built-in magnet | Without switch | - | - | Through-Hole / Both Ends Tapped Common (Standard) | Female rod end | Low speed cylinder (10 to 50 mm/s) | ||
- | 1 Piece(s) | Quote | 20 | 10 | Low Speed | None | 0.05 to 1.0 | Built-in magnet | M9BV | 0.5 | 2 | Through-Hole / Both Ends Tapped Common (Standard) | Female rod end | Low-speed cylinder (5 to 50 mm/s) | ||
- | 1 Piece(s) | Quote | 20 | 10 | Low Speed | None | 0.05 to 1.0 | Built-in magnet | Without switch | - | - | Through-Hole / Both Ends Tapped Common (Standard) | Female rod end | Low-speed cylinder (5 to 50 mm/s) | ||
- | 1 Piece(s) | Quote | 20 | 10 | Low Speed | Rubber cushion | 0.05 to 1.0 | Built-in magnet | M9BV | 0.5 | 2 | Through-Hole / Both Ends Tapped Common (Standard) | Female rod end | Low-speed cylinder (5 to 50 mm/s) | ||
- | 1 Piece(s) | Quote | 20 | 10 | Low Speed | None | 0.05 to 1.0 | Built-in magnet | A93V | 0.5 | 2 | Through-Hole / Both Ends Tapped Common (Standard) | Male rod end | Low-speed cylinder (5 to 50 mm/s) | ||
- | 1 Piece(s) | Quote | 20 | 10 | Low Speed | None | 0.05 to 1.0 | Built-in magnet | Without switch | - | - | Through-Hole / Both Ends Tapped Common (Standard) | Male rod end | Low speed cylinder (10 to 50 mm/s) | ||
- | 1 Piece(s) | Quote | 20 | 15 | Low Speed | Rubber cushion | 0.05 to 1.0 | Built-in magnet | M9BV | 0.5 | 2 | Through-Hole / Both Ends Tapped Common (Standard) | Female rod end | Low-speed cylinder (5 to 50 mm/s) | ||
- | 1 Piece(s) | Quote | 20 | 20 | Low Speed | None | 0.05 to 1.0 | Built-in magnet | A93V | 0.5 | 2 | Through-Hole / Both Ends Tapped Common (Standard) | Female rod end | Low-speed cylinder (5 to 50 mm/s) | ||
- | 1 Piece(s) | Quote | 20 | 20 | Low Speed | None | 0.05 to 1.0 | Built-in magnet | M9B | 0.5 | 2 | Through-Hole / Both Ends Tapped Common (Standard) | Female rod end | Low speed cylinder (10 to 50 mm/s) | ||
- | 1 Piece(s) | Quote | 20 | 20 | Low Speed | None | 0.05 to 1.0 | Built-in magnet | M9BW | 0.5 | 2 | Through-Hole / Both Ends Tapped Common (Standard) | Female rod end | Low speed cylinder (10 to 50 mm/s) | ||
- | 1 Piece(s) | Quote | 20 | 20 | Low Speed | None | 0.05 to 1.0 | Built-in magnet | M9N | 0.5 | 1 | Through-Hole / Both Ends Tapped Common (Standard) | Female rod end | Low speed cylinder (10 to 50 mm/s) | ||
- | 1 Piece(s) | Quote | 20 | 20 | Low Speed | None | 0.05 to 1.0 | Built-in magnet | Without switch | - | - | Through-Hole / Both Ends Tapped Common (Standard) | Female rod end | Low speed cylinder (10 to 50 mm/s) | ||
- | 1 Piece(s) | Quote | 20 | 20 | Low Speed | Rubber cushion | 0.05 to 1.0 | Built-in magnet | A93 | 0.5 | 2 | Through-Hole / Both Ends Tapped Common (Standard) | Female rod end | Low-speed cylinder (5 to 50 mm/s) | ||
- | 1 Piece(s) | Quote | 20 | 20 | Low Speed | Rubber cushion | 0.05 to 1.0 | Built-in magnet | Without switch | - | - | Through-Hole / Both Ends Tapped Common (Standard) | Female rod end | Low-speed cylinder (5 to 50 mm/s) | ||
- | 1 Piece(s) | Quote | 20 | 20 | Low Speed | Rubber cushion | 0.05 to 1.0 | Built-in magnet | M9N | 0.5 | 2 | Through-Hole / Both Ends Tapped Common (Standard) | Male rod end | Low-speed cylinder (5 to 50 mm/s) | ||
- | 1 Piece(s) | Quote | 20 | 20 | Low Speed | Rubber cushion | 0.05 to 1.0 | Built-in magnet | Without switch | - | - | Through-Hole / Both Ends Tapped Common (Standard) | Male rod end | Low-speed cylinder (5 to 50 mm/s) | ||
- | 1 Piece(s) | Quote | 20 | 25 | Low Speed | Rubber cushion | 0.05 to 1.0 | Built-in magnet | A93 | 0.5 | 2 | Through-Hole / Both Ends Tapped Common (Standard) | Female rod end | Low-speed cylinder (5 to 50 mm/s) | ||
1,804,000 VND | 1 Piece(s) | 32 Day(s) | 20 | 25 | Low Speed | Rubber cushion | 0.05 to 1.0 | Built-in magnet | Without switch | - | - | Through-Hole / Both Ends Tapped Common (Standard) | Female rod end | Low-speed cylinder (5 to 50 mm/s) | ||
- | 1 Piece(s) | Quote | 20 | 30 | Low Speed | Rubber cushion | 0.05 to 1.0 | Built-in magnet | Without switch | - | - | Through-Hole / Both Ends Tapped Common (Standard) | Male rod end | Low-speed cylinder (5 to 50 mm/s) | ||
- | 1 Piece(s) | Quote | 20 | 35 | Low Speed | Rubber cushion | 0.05 to 1.0 | Built-in magnet | Without switch | - | - | Through-Hole / Both Ends Tapped Common (Standard) | Female rod end | Low-speed cylinder (5 to 50 mm/s) | ||
- | 1 Piece(s) | Quote | 20 | 40 | Low Speed | None | 0.05 to 1.0 | Built-in magnet | Without switch | - | - | Through-Hole / Both Ends Tapped Common (Standard) | Female rod end | Low-speed cylinder (5 to 50 mm/s) | ||
- | 1 Piece(s) | Quote | 20 | 40 | Low Speed | Rubber cushion | 0.05 to 1.0 | Built-in magnet | Without switch | - | - | Through-Hole / Both Ends Tapped Common (Standard) | Male rod end | Low-speed cylinder (5 to 50 mm/s) | ||
- | 1 Piece(s) | Quote | 20 | 40 | Low Speed | None | 0.05 to 1.0 | Built-in magnet | A93 | 3 | 2 | Through-Hole / Both Ends Tapped Common (Standard) | Male rod end | Low speed cylinder (10 to 50 mm/s) | ||
- | 1 Piece(s) | Quote | 25 | 5 | Low Speed | None | 0.05 to 1.0 | Built-in magnet | Without switch | - | - | Through-Hole / Both Ends Tapped Common (Standard) | Male rod end | Low-speed cylinder (5 to 50 mm/s) |
Loading...Tải…
Basic InformationThông tin cơ bản
| Cylinder Operation Method | Double Acting | Rod Operation Method | Double rod | Main Body Shape | Plate Cylinder |
|---|---|---|---|---|---|
| Additional Function | High rigidity / high precision high class guide |
- The specifications and dimensions of some parts may not be fully covered. For exact details, refer toCác thông số kỹ thuật và kích thước của mã sản phẩm có thể không được bao phủ đầy đủ. Để biết chi tiết chính xác, hãy tham khảo manufacturer catalogsdanh mục nhà sản xuất ..
How can we improve?
How can we improve?
While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
Customer Privacy Policy
Thank you for your cooperation.
While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
Please use the inquiry form.
Customer Privacy Policy