(!) Since support from Microsoft will end on January 14th, 2020, Windows 7 will be excluded from the recommended environment from December 15th, 2019 on this site. Vì lý do Microsoft kết thúc hỗ trợ cho Windows 7 vào ngày 14/01/2020, Windows 7 sẽ là hệ điều hành không được khuyến khích sử dụng với trang web này từ ngày 15/12/2019.

Tel: 0222-361-1555 Email: [email protected] 8:00 - 17:00 (Mon - Sat)

ものづくりの、明日を支える。MISUMI-VONA 生産材コマースものづくりの、明日を支える。MISUMI-VONA 生産材コマース

Webcode Seach | Series: #CODE

Keyword suggestionsTừ khóa gợi ý

Part number suggestionsGợi ý mã sản phẩm

Discontinued Products

Search by Category / Brand Tìm theo danh mục, nhãn hiệu

Search by Category Tìm theo danh mục

[Thông báo] Cập nhật địa chỉ kho tập kết hàng hóa tại khu vực miền Nam của MISUMI Việt Nam. Xem chi tiết.
[Announcement] Update on warehouse address in the Southern region of MISUIMI Vietnam. See more. 
[Cảnh Báo] Thủ Đoạn Lừa Đảo Từ Nhân Viên Giao Hàng – Yêu Cầu Trả Phí Ship. Xem chi tiết.
[Warning] Fraud Calling from Shipper - Asking to Pay Shipping Fee. See more.

How can we improve?

How can we improve?

Comments

Name (Optional)

E-mail Address (Optional)

Tel (Optional)

While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
Customer Privacy Policy

Thank you for your cooperation.

While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
Please use the inquiry form.

Customer Privacy Policy

ConfigureTạo

Part number has not been determine

(1 Part Numbers Available)

Configure Remaining SpecificationsĐịnh cấu hình các thông số còn lại

Part Number CompleteĐã hoàn thành

AFD20-02-CJ-A

Treatment Air Flow Rate type Filtration Level Plumbing Thread Nominal Type Connection Type Drain Cock Bowl Material Bowl Guard Flow Direction Size of Body Accessory Drain Outlet Pressure Unit Custom-made Specifications CAD Days to Ship

Specification/DimensionsĐặc điểm kỹ thuật / Kích thướcĐặc điểm kỹ thuật / Kích thước

Treatment Air Flow Rate(l/min)
120

200

450

600

1100
ClearTrống
type
- AFD20
- AFD30
- AFD40
- AFM20
- AFM30
- AFM40
ClearTrống
Filtration Level
- 0.01μm
- 0.3μm
ClearTrống
Plumbing Thread Nominal
- 1/8
- 1/4
- 3/8
- 1/2
- 3/4
ClearTrống
Type
- Standard
  - Standard
ClearTrống
Connection Type
- Rc (R)
  - Rc
- NPT
  - NPT
- G
  - G
ClearTrống
Drain Cock
- No
- Manual Type
  - Manual
- Auto Float Type
  - N.C. Automatic Drain
  - N.O. Automatic Drain
ClearTrống
Bowl Material
- Plastic
  - Nylon Case
  - Polycarbonate case with case guard
- Metal with Level Gauge
  - Metal Case with Level Gauge
  - Metal Case with Level Gauge
ClearTrống
Bowl Guard
- No
- Presence
ClearTrống
Flow Direction
- (Right)
  - From Left to Right
- (Left)
  - Right→Left
ClearTrống
Size of Body
- 20
- 30
- 40
ClearTrống
Accessory
- Bracket
- None
ClearTrống
Drain Outlet
- Drain guide 1/4
- Drain guide 1/8
- With drain cock, barb fitting (for ø6 × ø4 nylon tube)
- With drain cock, barbed fitting (for ø6 × ø4 nylon tube)
- With drain cock
ClearTrống
Pressure Unit
- Name plate and bowl caution plate units: MPa
- Name plate and bowl caution plate units: psi, ºF
- Name plate and case caution plate units: MPa
- Name plate and case caution plate units: psi, ºF
ClearTrống
Custom-made Specifications
- Long bowl compatible
- None
- With clogging checker
ClearTrống
CADCAD
- 2D
- 3D
ClearTrống

Days to ShipSố ngày giao hàng

Alltất cả các

Same day

32 Day(s) or Less

37 Day(s) or Less

42 Day(s) or Less
ClearTrống

Specify AlterationsChỉ định thay đổi

Mist Separator AFM20 to AFM40-A/Micro Mist Separator AFD20 to AFD40-A (AFD20-02-CJ-A)

Click this image to zoom it.Nhấp vào hình ảnh này để phóng to.

Move the mouse over or click the image to zoom

Brand :

SMC

Order Qty :
Price :

---
Total Price :

---
Days to ship :

---

Select part number to Order Now/ Add to Cart

CAD Download

(i)
Caution

thận trọng

The products shown in the image are representative. CAD data is not supported for some model numbers.

Product Description

Energy-saving Mist Separator AFM and Micro-Mist Separator AFD.
[Features]
· Improved visibility and environmental resistance.
· The bowl is completely covered by transparent bowl guard.

Mist Separator AFM & Micro-Mist Separator AFD: Details

AFM20-A: product images

AFD40-A: product images

Mist Separator AFM & Micro-Mist Separator AFD: Specifications Examples

Model Number Notation

Model number example

-				Code	Contents	(1)
						Body size
						20	30	40
(2)	Screw Type			No symbol	Rc	●	●	●
				N ^{Note 1)}	NPT	●	●	●
				F ^{Note 2)}	G	●	●	●
(3)	Piping connection port diameter			01	1/8	●	-	-
				02	1/4	●	●	●
				03	3/8	-	●	●
				04	1/2	-	-	●
				06	3/4	-	-	●
(4)	Option	a	Mounting	No symbol	Without optional mounting parts	●	●	●
		a	Mounting	B ^{Note 3)}	With Bracket	●	●	●
		b	Float type auto drain	No symbol	Without auto drain	●	●	●
				C ^{Note 4)}	N.C. (Normally Closed) Drain port is closed when no pressure is applied	●	●	●
				D ^{Note 5)}	N.O. (Normally Open) Drain port is open when no pressure is applied	-	●	●
(5)	Semi-standard	c	Bowl ^{Note 6)}	No symbol	Polycarbonate bowl	●	●	●
				2	Metal bowl	●	●	●
				6	Nylon bowl	●	●	●
				8	Metal bowl with level gauge	-	●	●
				C	With bowl guard	●	-^{Note 7)}	-^{Note 7)}
				6C	With bowl guard (nylon bowl)	●	-^{Note 8)}	-^{Note 8)}
		d	Drain exhaust port ^{Note 12)}	No symbol	With drain cock	●	●	●
				J ^{Note 9)}	Drain guide 1/8	●	-	-
				J ^{Note 9)}	Drain guide 1/4	-	●	●
				W ^{Note 13)}	Drain cock with barb fitting (ø6 [diameter 6 mm] × ø4 [diameter 4 mm] for nylon tubes)	-	●	●
		e	Flow direction	No symbol	Flow direction: left → right	●	●	●
		e	Flow direction	R	Flow direction: right → left	●	●	●
		f	Pressure unit	No symbol	Name plate and bowl caution plate units: MPa	●	●	●
		f	Pressure unit	Z ^{Note 10)}	Name plate and bowl caution plate units: psi, °F	○ ^{Note 11)}	○ ^{Note 11)}	○ ^{Note 11)}

*Note 1) The drain guide is NPT1/8 (applicable to the AFM20-A, AFD20-A); and NPT1/4 (applicable to the AFM30-A, AFM40-A / AFD30-A, AFD40-A). The auto drain port comes with a ø3/8 (diameter 3/8 mm) one-touch fitting (applicable to the AFM30-A, AFM40-A / AFD30-A, AFD40-A).
*Note 2) The drain guide is G1/8 (applicable to the AFM20-A, AFD20-A); and G1/4 (applicable to the AFM30-A, AFM40-A / AFD30-A, AFD40-A).
*Note 3) Brackets are not assembled and are supplied loose at the time of shipment. Mounting screws (2 pcs.) included.
*Note 4) When pressure is not applied, condensate which does not start the auto drain mechanism will remain in the drain bowl. Therefore manual release before ending operations is recommended.
*Note 5) If the compressor used is small (0.75 kW, discharge flow rate is less than 100 L/min [ANR]), air leakage from the drain cock may occur when operations start. As such an N.C. type is recommended.
*Note 6) For chemical resistance of the bowl, refer to the table below "Effects of atmosphere of organic solvents and chemicals and where these elements are likely to adhere to the equipment. Chemical data for substances causing degradation (Reference)."
*Note 7) A bowl guard is provided as standard (polycarbonate).
*Note 8) A bowl guard is provided as standard (nylon).
*Note 9) Does not include a valve function.
*Note 10) Thread type: NPT is applicable. Under new Japanese measurement laws, this product is only available for sale outside of Japan (SI units are used in Japan).
*Note 11) ○ is for thread type NPT only.
*Note 12) Float type auto drain: Cannot be selected in combination with C, D.
*Note 13) Metal bowl: Cannot be selected in combination with 2, 8.

Effects of atmosphere of organic solvents and chemicals and where these elements are likely to adhere to the equipment. Chemical data for substances causing degradation (Reference)

Type	Chemical name	Application examples	Materials
Type	Chemical name	Application examples	Polycarbonate	Nylon
Acid	Hydrochloric acid Sulfuric acid, Phosphoric acid Chromic acid	Acid washing liquid for metals	Possible use	×
Alkaline	Sodium hydroxide (caustic soda) Potassium hydroxide Calcium hydroxide Ammonia water Sodium carbonate	Degreasing of metals Industrial salts Water-soluble cutting oil	×	○
Inorganic salts	Sodium sulfide Potassium nitrate Sodium sulfate	-	×	Possible use
Chlorinated solvents	Carbon tetrachloride Chloroform Ethylene chloride Methylene chloride	Cleansing liquid for metals Printing ink Dilution	×	Possible use
Aromatic series	Benzene Toluene Paint thinner	Coatings Dry cleaning	×	Possible use
Ketone	Acetone Methyl ethyl ketone Cyclohexane	Photographic film Dry cleaning Textile industries	×	×
Alcohol	Ethyl alcohol IPA Methyl alcohol	Antifreeze Adhesive	Possible use	×
Oil	Gasoline Kerosene	-	×	○
Ester	Phthalic acid dimethyl Phthalic acid diethyl Acetic acid	Synthetic oil Anti-rust additives	×	○
Ether	Methyl ether Ethyl ether	Brake oil additives	×	○
Amino	Methyl amino	Cutting oil Brake oil additives Rubber accelerator	×	×
Other	Thread-lock fluid Seawater Leak tester	-	×	Possible use

○: Essentially safe △: Some effects may occur ×: Effects will occur

*When the above factors are present, or if there is some doubt, use a metal bowl for safety.

Standard specification

Model		AFM20-A AFD20-A	AFM30-A AFD30-A	AFM40-A AFD40-A	AFM40-06-A AFD40-06-A
Model		AFM20-A AFD20-A	AFM30-A AFD30-A	AFM40-A AFD40-A	AFM40-06-A AFD40-06-A
Connection port size		1/8, 1/4	1/4, 3/8	1/4, 3/8, 1/2	3/4
Applicable fluids		Air
Ambient temperature and working fluid temperature		-5 to 60°C (no freezing)
Proof pressure		1.5 MPa
Maximum operating pressure		1.0 MPa
Minimum operating pressure		0.05 MPa
Filtration	AFM20-A to AFM40-06-A	0.3 μm (filtration efficiency 99.9%)
Filtration	AFD20-A to AFD40-06-A	0.01 μm (filtration efficiency 99.9%)
Oil mist density at outlet side	AFM20-A to AFM40-06-A	MAX 1.0 mg/m³ (ANR) (≒0.008 ppm) ^{Note 2) Note 3)}
Oil mist density at outlet side	AFD20-A to AFD40-06-A	MAX 0.1 mg/m³ (ANR) before saturated with oil, 0.01 mg/m³ (ANR) or less (≒0.008 ppm) ^{Note 2) Note 3)}
Rated flow (L/min [ANR]) ^{Note 1)}	AFM20-A to AFM40-06-A	200	450	1,100
Rated flow (L/min [ANR]) ^{Note 1)}	AFD20-A to AFD40-06-A	120	240	600
Drain capacity (cm³)		8	25	45
Case materials		Polycarbonate
Bowl guard		Semi-standard (steel)	Standard equipment (polycarbonate)
Weight (kg)		0.09	0.19	0.38	0.43

*Note 1) Conditions - Inlet pressure is 0.7 MPa. The rated flow varies according to the inlet pressure. Keep the air flow within the rated flow to prevent an outflow of oil to the outlet side.
*Note 2) At compressor discharge concentration 30 mg/m³ (ANR)
*Note 3) The bowl seal and other O-rings use a small amount of grease.

Structural Drawings

AFM20-A/AFD20-A: structural drawings

AFM30-A to AFM40-06-A / AFD30-A to AFD40-06-A structural drawings

Component Parts

Number	Part name	Materials	Model	Additional notes
1	Body	Die-cast aluminum	AFM20-A to AFM40-06-A AFD20-A to AFD40-06-A	Urban white

Replacement Parts

Number	Part name		Materials	Part number
Number	Part name		Materials	AFM20-A AFD20-A	AFM30-A AFD30-A	AFM40-A AFD40-A	AFM40-06-A AFD40-06-A
2	Element assembly	AFM20 to 40	-	AFM20P-060AS	AFM30P-060AS	AFM40P-060AS
2	Element assembly	AFD20 to 40	-	AFD20P-060AS	AFD30P-060AS	AFD40P-060AS
3	Bowl seal		NBR	C2SFP-260S	C32FP-260S	C42FP-260S
4	Bowl assembly ^Note)		Polycarbonate	C2SF-A	C3SF-A	C4SF-A

*Note) Bowl seal is included. Units displayed: Please check separately with the manufacturer with regard to the supply of bowl assemblies with psi, °F units.

Mist Separator AFM, Micro-Mist Separator AFD: Dimensions

AFM20-A/AFD20-A

AFM20-A/AFD20-A dimensional drawings

AFM30-A to AFM40-06-A / AFD30-A to AFD40-06-A

AFM30-A to AFM40-06-A / AFD30-A to AFD40-06-A: dimensional drawings

(Unit: mm)

Model	Standard specification								Option specification
	Standard specification								Bracket mounting dimensions								With auto drain
	P	A	B	C	D	E	G	J	M	N	Q	R	S	T	U	V	B
AFM20-A/AFD20-A	1/8, 1/4	40	87.6	9.8	20	-	40	20	30	27	22	5.4	8.4	40	2.3	28	104.9
AFM30-A/AFD30-A	1/4, 3/8	53	115.1	14	26.7	30	50	26.7	41	35	23	6.5	13	53	2.3	30	156.8
AFM40-A/AFD40-A	1/4, 3/8, 1/2	70	147.1	18	35.5	38.4	75	35.5	50	52	26	8.5	12.5	70	2.3	35	186.9
AFM40-06-A/AFD40-06-A	3/4	75	149.1	20	35.5	38.4	75	35.5	50	52	25	8.5	12.5	70	2.3	34	188.9

(Unit: mm)

Model	Semi-standard specifications
	With barb fitting	With drain guide	Metal bowl	Metal bowl with drain guide	Metal bowl with level gauge	Metal bowl with drain guide with level gauge
	B	B	B	B	B	B
AFM20-A/AFD20-A	-	91.4	87.4	93.9	-	-
AFM30-A/AFD30-A	123.6	121.9	117.6	122.1	137.6	142.1
AFM40-A/AFD40-A	155.6	153.9	149.6	154.1	169.6	174.1
AFM40-06-A/AFD40-06-A	157.6	155.9	151.6	156.1	171.6	176.1

: 30; 45; 60

Part Number
AFD20-02-CJ-A

Part Number	Price	Minimum Order Qty.	Volume Discount	Days to ShipSố ngày giao hàng	Filtration Level	Plumbing Thread Nominal	Type	Connection Type	Treatment Air Flow Rate (l/min)	Drain Cock	Bowl Material	Bowl Guard	Flow Direction	Size of Body	Accessory	Drain Outlet	Pressure Unit	Custom-made Specifications
	-	1 Piece(s)		Quote	0.01μm	1/4	Standard	[Rc (R)] Rc	-	No	[Plastic] Nylon Case	Presence	[(Right)] From Left to Right	20	None	Drain guide 1/8	Name plate and bowl caution plate units: MPa	None

Loading...Tải…

Basic InformationThông tin cơ bản

Compressed Air Quality	General Dry Air	Operating Environment	Standard

Please check the type/dimensions/specifications of the part AFD20-02-CJ-A in the Mist Separator AFM20 to AFM40-A/Micro Mist Separator AFD20 to AFD40-A series.Vui lòng kiểm tra kiểu/kích thước/thông số kỹ thuật của phần AFD20-02-CJ-A trong chuỗi Mist Separator AFM20 to AFM40-A/Micro Mist Separator AFD20 to AFD40-A.

The specifications and dimensions of some parts may not be fully covered. For exact details, refer toCác thông số kỹ thuật và kích thước của mã sản phẩm có thể không được bao phủ đầy đủ. Để biết chi tiết chính xác, hãy tham khảo manufacturer catalogsdanh mục nhà sản xuất ..

Products like this...

Part Number
AFD20-01-6R-A
AFD20-01-A
AFD20-01-A-X2141
AFD20-02-CR-A
AFD20-02-J-A
AFD20-02-JR-A

Standard Unit Price	Minimum order quantity	Days to ShipSố ngày giao hàng	Filtration Level	Plumbing Thread Nominal	Type	Connection Type	Treatment Air Flow Rate (l/min)	Drain Cock	Bowl Material	Bowl Guard	Flow Direction	Size of Body	Accessory	Drain Outlet	Pressure Unit	Custom-made Specifications
-	1 Piece(s)	Quote	0.01μm	1/8	Standard	[Rc (R)] Rc	-	[Manual Type] Manual	[Plastic] Polycarbonate case with case guard	No	[(Left)] Right→Left	20	None	With drain cock	Name plate and bowl caution plate units: MPa	None
696,800 VND	1 Piece(s)	Same day	0.01μm	1/8	Standard	[Rc (R)] Rc	-	[Manual Type] Manual	[Plastic] Nylon Case	No	[(Right)] From Left to Right	20	None	With drain cock	Name plate and bowl caution plate units: MPa	None
-	1 Piece(s)	Quote	0.01μm	1/8	Standard	[Rc (R)] Rc	-	[Manual Type] Manual	[Plastic] Nylon Case	No	[(Right)] From Left to Right	20	None	With drain cock	Name plate and bowl caution plate units: MPa	With clogging checker
792,000 VND	1 Piece(s)	32 Day(s)	0.01μm	1/4	Standard	[Rc (R)] Rc	-	[Manual Type] Manual	[Plastic] Nylon Case	Presence	[(Left)] Right→Left	20	None	With drain cock	Name plate and bowl caution plate units: MPa	None
728,800 VND	1 Piece(s)	32 Day(s)	0.01μm	1/4	Standard	[Rc (R)] Rc	-	No	[Plastic] Nylon Case	No	[(Right)] From Left to Right	20	None	Drain guide 1/8	Name plate and bowl caution plate units: MPa	None
-	1 Piece(s)	Quote	0.01μm	1/4	Standard	[Rc (R)] Rc	-	No	[Plastic] Nylon Case	No	[(Left)] Right→Left	20	None	Drain guide 1/8	Name plate and bowl caution plate units: MPa	None

Top of the page

About MISUMIVề Misumi

About this WebsiteVề trang Web này

Useful ToolsCác công cụ hữu ích

Customer ServiceDịch vụ chăm sóc khách hàng

MISUMI Contact Monday to Saturday: 8:00 am - 5:00 pm Order cut off time is 5:00 pm Thứ 2 đến Thứ 7: 8 giờ sáng đến 5 giờ chiều Hạn chót đặt hàng là 5 giờ chiều

Tel:Số điện thoại:0222-361-1555
Fax:Số Fax:0222-361-2555
InquiryYêu cầu

MISUMI APP

Install MISUMI APP

MISUMI Vietnam Company Limited, Legal Representative: Tomohiro Watanabe,
phone: 0222-361-1555, e-mail: [email protected], Enterprise Code: 0107514576,
Date of Issuance: 22 July 2016, Place of Issuance: Bac Ninh, Business Certificate No. 6573041568-KD dated 27 September 2016 issued by the People's Committee of Bac Ninh

Công ty TNHH MISUMI Việt Nam, Đại diện theo pháp luật: Tomohiro Watanabe,
Điện thoại: 0222-361-1555, e-mail: [email protected], Mã số doanh nghiệp: 0107514576,
ngày cấp 22/7/2016, nơi cấp: Bắc Ninh, Giấy phép kinh doanh số: 6573041568-KD ngày cấp 27/9/2016 bởi UBND tỉnh Bắc Ninh

Search by Category / Brand Tìm theo danh mục, nhãn hiệu

Search by Category Tìm theo danh mục

How can we improve?

ConfigureTạo

Specification/DimensionsĐặc điểm kỹ thuật / Kích thướcĐặc điểm kỹ thuật / Kích thước

Treatment Air Flow Rate(l/min)

type

Filtration Level

Plumbing Thread Nominal

Type

Connection Type

Drain Cock

Bowl Material

Bowl Guard

Flow Direction

Size of Body

Accessory

Drain Outlet

Pressure Unit

Custom-made Specifications

CADCAD