(!) Since support from Microsoft will end on January 14th, 2020, Windows 7 will be excluded from the recommended environment from December 15th, 2019 on this site. Vì lý do Microsoft kết thúc hỗ trợ cho Windows 7 vào ngày 14/01/2020, Windows 7 sẽ là hệ điều hành không được khuyến khích sử dụng với trang web này từ ngày 15/12/2019.
Tel: 0222-361-1555
Email: [email protected]
8:00 - 17:00 (Mon - Sat)
Search by Category / Brand Tìm theo danh mục, nhãn hiệu
Search by Category Tìm theo danh mục
- [Thông báo] Cập nhật địa chỉ kho tập kết hàng hóa tại khu vực miền Nam của MISUMI Việt Nam. Xem chi tiết.
[Announcement] Update on warehouse address in the Southern region of MISUIMI Vietnam. See more. - [Cảnh Báo] Thủ Đoạn Lừa Đảo Từ Nhân Viên Giao Hàng – Yêu Cầu Trả Phí Ship. Xem chi tiết.
[Warning] Fraud Calling from Shipper - Asking to Pay Shipping Fee. See more.
-
My Components
Thêm v
-
Similar ProductsSản phẩm tương tự
Product Detail- CAD Data unavailable Dữ liệu CAD không khả dụng
Specification/DimensionsĐặc điểm kỹ thuật / Kích thướcĐặc điểm kỹ thuật / Kích thước
-
type
- TCH
-
Nominal A 1
-
Nominal B 1
-
Applicable Pipe O.D. 1(mm)
-
Connection Thread Type
- R
- G (Threaded)
- R
-
Nominal of Thread
- 1/2B(15A)
- 3/4B(20A)
Days to ShipSố ngày giao hàng
-
- Alltất cả các
- 10 Day(s) or Less
- 11 Day(s) or Less
Specify AlterationsChỉ định thay đổi
TF Tech-Touch, Externally Threaded Adapter (Part Number)
Copy Part Number URL to Clipboard
The part number URL has been copied into your clipboard.
-
- From :
- 592,818VND/Unit
-
- Order Qty :
-
-
- Total Price :
- ---
-
- Days to ship :
- ---
Select part number to Order Now/ Add to Cart
- CAD Data unavailable
Similar Products
Product DetailProduct Description
A copper pipe fitting for water supply and hot water supply that can be installed by simply inserting without using fire.
[Features]
·You can connect by simply inserting it until it clicks into place.
·Installation time can be shortened.
·Can be installed in tight spaces without tools.
·It is easy to adjust the angle during installation.
·No fire or electricity required.
·Any type of connecting copper pipe is acceptable (but not for gas or kerosene pipes).
·A full range of peripheral components are available, including an insertion check tool.
Drawing
Standard table
Example of use
How to use
Connecting TF Tech Touch Fitting Reducer to TF Tech Touch 3/4 makes 3/4 x 1/2 of T/90° elbow socket, 1/2 x 3/4 of the male threaded and female threaded adapters.
★The dimensions are reference values and are subject to change without notice.
Property and performance information / test information
Tensile test
| Nominal Diameter | 1/2 | 3/4 |
|---|---|---|
| Standard value | 1000 N | 1900 N |
| Results | 2600 N | 4100 N |
Method After a pipe of appropriate length is joined to both ends of the pipe fitting, pull it and measure the joint shedding load, which shall be greater than the standard value.
Pressure resistant test
| Nominal Diameter | 1/2 | 3/4 |
|---|---|---|
| pressure | 2.5 MPa | |
| Retention time | 2 minutes | |
| Results | No leaks, destruction or other abnormalities | |
Method Apply water pressure of 2.5 MPa to the pipe fitting to check for leaks, destruction, or other abnormalities.
The retention time is 2 minutes.
Operating temperature and pressure
| Temperature | Working pressure limit |
|---|---|
| Up to 30°C | 1.6 MPa |
| Up to 65°C | 1.0 MPa |
| Up to 95°C | 0.6 MPa |
Method The working pressure is the data that confirms the basic performance of the pipe fitting, so please refer to the table on the right for actual use.
Construction procedure
Cutting
Cut the copper pipe at a right angle with a pipe cutter.
Marking
Mark the joining depth for each nominal diameter on the outer surface of the copper pipe.
| Nominal Diameter | 1/2 | 3/4 | Unit |
|---|---|---|---|
| Joining depth | 23 | 27 | mm |
Edge chamfering
Chamfer the inside and outside surfaces using a reamer or similar tool.
* Be sure to remove burrs as they may cause damage to the O-ring.
Connection
Insert the copper tube until it clicks into place, and make sure that the marking part does not change from the end of the fitting when the copper pipe is pulled.
After completing the construction of the pipeline, carry out a water pressure testing to confirm that there is no water leakage.
Ellipse correction
Correct the ellipse at the end of the pipe.
* The ellipse is not included in the tech marking.
| Part Number |
|---|
| TCH-AT-1/2-G |
| Part Number | Price | Minimum Order Qty. | Volume Discount | Days to ShipSố ngày giao hàng | Nominal A 1 | Nominal B 1 | Applicable Pipe O.D. 1 (mm) | Connection Thread Type | Nominal of Thread | Operating Temperature Range (°C) |
|---|---|---|---|---|---|---|---|---|---|---|
592,818 VND | 1 Piece(s) | 10 Day(s) or more | 15 | 1/2 | 15.88 | G (Threaded) | 1/2B(15A) | ～95 |
Loading...Tải…
Basic InformationThông tin cơ bản
| Type | Fitting | Material | Copper | Applicable Pipe Type | Copper Pipe (for Construction) |
|---|---|---|---|---|---|
| Applicable Fluid | Water | Connection Type | Pipe⇔Screw, plug-in type | Connection Shape | Straight Pipe⇔Screw(Union/Socket/Adapter/Connector.etc) |
| Fitting type | Mechanical Joint | Applicable Tube Size Type | Size for Copper Pipe construction | Material of Applicable Pipe | Copper |
| Max. Operating Pressure(MPa) | 1.6 | Divisions of Max. Operating Pressure(MPa) | 2.0Mpa or Less |
- The specifications and dimensions of some parts may not be fully covered. For exact details, refer toCác thông số kỹ thuật và kích thước của mã sản phẩm có thể không được bao phủ đầy đủ. Để biết chi tiết chính xác, hãy tham khảo manufacturer catalogsdanh mục nhà sản xuất ..
How can we improve?
How can we improve?
While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
Customer Privacy Policy
Thank you for your cooperation.
While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
Please use the inquiry form.
Customer Privacy Policy