(!) Since support from Microsoft will end on January 14th, 2020, Windows 7 will be excluded from the recommended environment from December 15th, 2019 on this site. Vì lý do Microsoft kết thúc hỗ trợ cho Windows 7 vào ngày 14/01/2020, Windows 7 sẽ là hệ điều hành không được khuyến khích sử dụng với trang web này từ ngày 15/12/2019.
Tel: 0222-361-1555
Email: [email protected]
8:00 - 17:00 (Mon - Sat)
Search by Category / Brand Tìm theo danh mục, nhãn hiệu
Search by Category Tìm theo danh mục
- [Thông báo] Cập nhật địa chỉ kho tập kết hàng hóa tại khu vực miền Nam của MISUMI Việt Nam. Xem chi tiết.
[Announcement] Update on warehouse address in the Southern region of MISUIMI Vietnam. See more. - [Cảnh Báo] Thủ Đoạn Lừa Đảo Từ Nhân Viên Giao Hàng – Yêu Cầu Trả Phí Ship. Xem chi tiết.
[Warning] Fraud Calling from Shipper - Asking to Pay Shipping Fee. See more.
Product DetailSpecification/DimensionsĐặc điểm kỹ thuật / Kích thướcĐặc điểm kỹ thuật / Kích thước
-
Number of Pins
-
CADCAD
- 2D
Days to ShipSố ngày giao hàng
-
- Alltất cả các
- Same day
- 4 Day(s) or Less
Specify AlterationsChỉ định thay đổi
MIL Press-fit Female Connector (Without Lock) (HIF3BA-14D-2.54R)
Click this image to zoom it.Nhấp vào hình ảnh này để phóng to.
Move the mouse over or click the image to zoom
- Volume Discount
- UL
- MIL
- For Signal
- Connection between Boards
- Solenoid Valve
- PLC
- Pressure Welding
- Gold Plated
You can add up to 6 items per a category to the compare list.
Brand :
Filter By :
- All
- Sale Items
Part Number :
Copy Part Number URL to Clipboard
The part number URL has been copied into your clipboard.
-
- From :
- 50,670VND/Unit
-
- Order Qty :
-
-
- Total Price :
- ---
-
- Days to ship :
- ---
Select part number to Order Now/ Add to Cart
● A small connector with high reliability with the contact interval of 2.54 mm pitch
that has acquired the MIL Standard (MIL-C-83503) (excluding 6-core) UL.
● Since the batch crimp method of the general-purpose 1.27 mm pitch flat cable is
used for the wiring system, wiring can be done in a short time.
● UL No. E52653
Rated Current: 1A
Rated Voltage: 200V AC
Compatible Electric Wire Size:AWG28 or 0.08 mm2, 1.27 mm Pitch Flat Cable, Fusion Cable
· Although wiring can be performed using a vise and the like, we recommend the use of tools specified by the manufacturer in terms of reliability. It should be noted that Misumi does not handle the tools specified by the manufacturer as standard. Although not specified by the manufacturer, low-cost simplified pressure welding tools that are convenient for proto-models and the like are available. However, be sure to check the connection after the connector is connected and before use.
· Please note that 50, 60 and 64-core models are available in 2 models with different guide key positions.
Similar Products
Product DetailProduct Description
MIL connector female pressure welding connector (without lock). HIF3 series connector widely used in Japan
Specifications
| Model | Number of Cores | Weight g |
| HIF3BA-6D-2.54R | 6 | 2.2 |
| HIF3BA-10D-2.54R | 10 | 2.0 |
| HIF3BA-14D-2.54R | 14 | 2.0 |
| HIF3BA-16D-2.54R | 16 | 3.0 |
| HIF3BA-20D-2.54R | 20 | 3.5 |
| HIF3BA-26D-2.54R | 26 | 4.0 |
| HIF3BA-30D-2.54R | 30 | 5.0 |
| HIF3BA-34D-2.54R | 34 | 5.5 |
| HIF3BA-40D-2.54R | 40 | 6.3 |
| HIF3BA-50D-2.54R | 50 | 7.9 |
| HIF3BB-50D-2.54R | 50 | 7.9 |
| HIF3BA-60D-2.54R | 60 | 9.3 |
| HIF3BB-60D-2.54R | 60 | 9.0 |
| HIF3BA-64D-2.54R | 64 | 10.0 |
| HIF3BB-64D-2.54R | 64 | 10.0 |
More Information
| Part Number |
|---|
| HIF3BA-14D-2.54R |
| Part Number | Price | Minimum Order Qty. | Volume Discount | Days to ShipSố ngày giao hàng | RoHS | Number of Pins |
|---|---|---|---|---|---|---|
62,556 VND | 1 Piece(s) | Available | 4 Day(s) or more | 10 | 14 |
Loading...Tải…
Connection Method for Pressure Welding Type MIL Socket Connector
The MIL standard socket connector is a small and highly versatile connector used for connecting various input/output signals, such as solenoid valves and programmable controllers in FA and SCSI and IDE in computers. The pressure welding type, which can connect cables easily, is especially popular and used widely. Although it is desirable to use dedicated tools specified by the manufacturer in terms of reliability of cable connection for the pressure welding type, most dedicated tools specified by the manufacturer usually cost about fifty to one hundred thousand yen. This kind of expense is out of the question when manufacturing a small prototype. Here we introduce a method for simple pressure welding, which can be useful when manufacturing prototypes or simple jigs. However, after processing, please thoroughly check the finish and connection before use.
(1) First of all, select the cable. Flat cables (photo 1) with wire spacing of 1.27 mm pitch can be used. Types of flat cables include the bridge type, which is nearly all gray wires except for red and green, the intermittent bonded gray type, in which the flat portion turns to loose wires partway through, and the twisted-pair flat type which is intermittent bonded and resistant to wire twisting noise; there are also flat cables with shields and color types using a variety of colors.
(2) Once you have selected the cable, cut it straight with scissors. (Picture 2) If it is cut curved or diagonally, the conductor may not reach the blade of the contact. Then apply the cut cable to the uneven portion of the holding plate. (Picture 3)
(3) Next, considering the cable draw-out direction, position the ▼ mark of the connector so that it matches the first wire (if it is gray type match with the red line, if it is color type match with the brown line) and apply the edge portion of the connector to the cable. Press down firmly with a finger so that the cable is not aslant. (Picture 4)
(4) After that you only need to clamp and weld with a vise or the simple pressure welding tool on P.a4209. (Picture 5) However, please perform the welding gradually and slowly. Also, if there is a lock lever as in the relay connector and the tool cannot be applied to the operation side, please use a wood block etc. so that there is always uniform force applied to the whole connector. Note that relay connector welding cannot be performed with a simple pressure welding tool.
(5) When the welding is complete, pull the connector out from the tool. (Picture 6) The strain relief is installed from the back of the connector so that the contact portion does not disconnect if force is applied to the cable during use. (Picture 7) Finally, check the conduction and the finished appearance of the pressure welding. (Picture 8)
Table of Possible Connectors for Pressure Welding
As well as MIL socket connectors, the simple pressure welding tool in the photos can be used for the following products.
| Product Name | Model |
|---|---|
| D-sub Connector (EMI Pressure Welding Type) |
FD*-*PF05 (Male) FD*-*P05 (Male) FD*-*S05 (Female) |
| Centronics Connector General-purpose Pressure Welding Spring-lock Type |
57F-30***-20S (Male) 57F-40***-20S (Female) |
| Centronics Connector (EMI Pressure Welding Type) |
57FE-30***-20N-D8 (Male) 57FE-40***-20N-D8 (Female) |
| FCN Pressure Welded Connector | FCN-367J***-AU-F (Female) |
| MIL Socket Connector Female Pressure Welding Contact Connector (without Lock) |
HIF3**-**D-2.54R (Female) 79**-B500FL-3448 * Cannot be used for 60 / 64 core type. The type with 2 guide keys also cannot be used |
| MIL Socket Connector Female Pressure Welding Contact Connector (with Lock) |
XG4M-****-U |
Caution: The attachment to hold the connector in place is not sold separately. When high reliability is required for the connection between the connector and the electrical wire, use a dedicated tool handled by the connector manufacturer.
Basic InformationThông tin cơ bản
| Connector Shape | Square shape | M/N/O | MIL | Applicable pin/contact | Female (socket) |
|---|---|---|---|---|---|
| Application | Cable-to-board | Allowable Current(A) | 1 | Allowable Voltage(V) | 200 |
| Wire connection method | Pressure welding | Connection direction | Straight | Protection function (environmentally resistant) | None |
Please check the type/dimensions/specifications of the part HIF3BA-14D-2.54R in the MIL Press-fit Female Connector (Without Lock) series.Vui lòng kiểm tra kiểu/kích thước/thông số kỹ thuật của phần HIF3BA-14D-2.54R trong chuỗi MIL Press-fit Female Connector (Without Lock).
- The specifications and dimensions of some parts may not be fully covered. For exact details, refer toCác thông số kỹ thuật và kích thước của mã sản phẩm có thể không được bao phủ đầy đủ. Để biết chi tiết chính xác, hãy tham khảo manufacturer catalogsdanh mục nhà sản xuất ..
Products like this...
| Part Number |
|---|
| HIF3BA-10D-2.54R |
| HIF3BA-26D-2.54R |
| HIF3BA-30D-2.54R |
| HIF3BA-34D-2.54R |
| HIF3BA-40D-2.54R |
| HIF3BA-50D-2.54R |
| Part Number | Standard Unit Price | Minimum order quantity | Volume Discount | Days to ShipSố ngày giao hàng | RoHS | Number of Pins |
|---|---|---|---|---|---|---|
50,670 VND | 1 Piece(s) | Available | Same day | 10 | 10 | |
74,025 VND | 1 Piece(s) | Available | 4 Day(s) or more | 10 | 26 | |
77,153 VND | 1 Piece(s) | Available | 4 Day(s) or more | 10 | 30 | |
82,574 VND | 1 Piece(s) | Available | Same day | 10 | 34 | |
88,205 VND | 1 Piece(s) | Same day | 10 | 40 | ||
101,967 VND | 1 Piece(s) | Available | 4 Day(s) or more | 10 | 50 |
How can we improve?
How can we improve?
While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
Customer Privacy Policy
Thank you for your cooperation.
While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
Please use the inquiry form.
Customer Privacy Policy