(!) Since support from Microsoft will end on January 14th, 2020, Windows 7 will be excluded from the recommended environment from December 15th, 2019 on this site. Vì lý do Microsoft kết thúc hỗ trợ cho Windows 7 vào ngày 14/01/2020, Windows 7 sẽ là hệ điều hành không được khuyến khích sử dụng với trang web này từ ngày 15/12/2019.
Tel: 0222-361-1555
Email: [email protected]
8:00 - 17:00 (Mon - Sat)
Search by Category / Brand Tìm theo danh mục, nhãn hiệu
Search by Category Tìm theo danh mục
- [Thông báo] Cập nhật địa chỉ kho tập kết hàng hóa tại khu vực miền Nam của MISUMI Việt Nam. Xem chi tiết.
[Announcement] Update on warehouse address in the Southern region of MISUIMI Vietnam. See more. - [Cảnh Báo] Thủ Đoạn Lừa Đảo Từ Nhân Viên Giao Hàng – Yêu Cầu Trả Phí Ship. Xem chi tiết.
[Warning] Fraud Calling from Shipper - Asking to Pay Shipping Fee. See more.
Product Detail
Free Length L
Inner Dia. D-2d (or D)
Outer Dia. D (or D1)
Height with the max. load applied ([Free Length] – [Allowable Deflection])
Spring Constant
Allowable Load (Configurable Range)
Max. Load
Wire Dia.
Solid Length
Allowable Displacement
End Face State
Maximum Height when Loaded (Free Length, Allowable Deflection)
I.D. D (⌀)
Total Coils Nt *Reference Value
type
Days to Ship
Specification/DimensionsĐặc điểm kỹ thuật / Kích thướcĐặc điểm kỹ thuật / Kích thước
-
Free Length L(mm)
-
Inner Dia. D-2d (or D)(Ø)
-
Outer Dia. D (or D1)(Ø)
-
Height with the max. load applied ([Free Length] – [Allowable Deflection])(mm)
-
Spring Constant(N/mm)
-
Allowable Load (Configurable Range)(N)
- 1.51~4.50
- 8.51~16.00
-
Max. Load(N)
-
Wire Dia.(Ø)
-
Solid Length(mm)
-
Allowable Displacement(mm)
-
End Face State
- With Grinding
- Without Grinding
-
Maximum Height when Loaded (Free Length, Allowable Deflection)(mm)
-
I.D. D (⌀)(φ)
-
Total Coils Nt *Reference Value
-
type
- E-GVUF
- E-GVUR
Days to ShipSố ngày giao hàng
-
- Alltất cả các
- 4 Day(s) or Less
Specify AlterationsChỉ định thay đổi
Compression Spring - I.D. Referenced Stainless Steel, Light Load [RoHS Compliant]
![Compression Spring - I.D. Referenced Stainless Steel, Light Load [RoHS Compliant]](http://content.misumi-ec.com/image/upload/f_auto,q_auto,t_product_main/t_misumi_wm/v1/p/cn/product/series/110310295199/110310295199_20200521163939.jpg?$product_main$)
Click this image to zoom it.Nhấp vào hình ảnh này để phóng to.
Move the mouse over or click the image to zoom
![Compression Spring - I.D. Referenced Stainless Steel, Light Load [RoHS Compliant]](http://content.misumi-ec.com/image/upload/f_auto,q_auto,t_product_thum/t_misumi_wm/v1/p/cn/product/series/110310295199/110310295199_20200521163939.jpg?$product_thum$)
![Compression Spring - I.D. Referenced Stainless Steel, Light Load [RoHS Compliant]](http://content.misumi-ec.com/image/upload/f_auto,q_auto,t_product_thum/t_misumi_wm/v1/p/cn/product/series/110310295199/110310295199_20200521163940.jpg?$product_thum$)
![Compression Spring - I.D. Referenced Stainless Steel, Light Load [RoHS Compliant]](http://content.misumi-ec.com/image/upload/f_auto,q_auto,t_product_thum/t_misumi_wm/v1/p/cn/product/series/110310295199/110310295199_20200521163941.jpg?$product_thum$)
- Volume Discount
You can add up to 6 items per a category to the compare list.
Brand :
MiSUMi Economy
Part Number :
Copy Part Number URL to Clipboard
The part number URL has been copied into your clipboard.
-
- From :
- 18,537VND/Unit
-
- Order Qty :
-
-
- Total Price :
- ---
-
- Days to ship :
- ---
Select part number to Order Now/ Add to Cart
Similar Products
Product DetailProduct Description
＼RoHS10-compliant products are newly released.
Product Overview
[Product Comparison Information]
♢Economy series compression springs are manufactured overseas, resulting in significant cost reductions.
♢ Since it is an I.D. referenced type spring, it is manufactured with priority given to I.D. tolerances. Please be careful.
♢ Stainless Steel Spring is magnetic. Please be careful.
♢Economy series compression springs are manufactured overseas, resulting in significant cost reductions.
♢ Since it is an I.D. referenced type spring, it is manufactured with priority given to I.D. tolerances. Please be careful.
♢ Stainless Steel Spring is magnetic. Please be careful.
| Item | MISUMI's Similar Products | Economy Series |
| Service Life | 1 million times | 700,000 Times |
| Manufactured | In Japan | Outside of Japan |
Dimensional Drawing
Closed Ends (*Both Ends Not Ground) Close Ends (Both Ends Ground) +0.6 mm +0.1 mm +0.8 mm +0.1 mm
| I.D. D | Free Length L | Spring Constant | |||
| ø8 or Less | L = 50 or less ±1 mm | ±10% | |||
| ø10 or More | L = 60 ±2 mm |
Specification Table
| Ordering Example | Part Number |
| E－GVUR8－20 |
■E-GVUR: Fmax (allowable deflection) = L x 60%
[ ! ] Both ends of * marked springs are not ground.
[ ! ] Using it compressed to the solid length may cause deformation or break after a few uses.
Be sure to use the springs within the range of the allowable deflection F max.(mm).
[ ! ] I.D. Referenced Type is inner diameter prioritized, and the O.D. is a reference value.
[!] If the order quantity is 200 or more, the product may be delivered in excess quantity. Thank you for your understanding.
| Part Number | O.D. D1 (Reference Value) | Wire Dia. d | F max. | N (kgf) max. | Pitch (Reference Value) | Solid Length (Reference Value) | Total Coils (Reference Value) | ||
| Type | D－L | ||||||||
| E-GVUR | 5-15* | 5.9 | 0.45 | 9 | 2.65{0.27} | 1.7 | 5.0 | 10.0 | |
| 20* | 12 | 3.53{0.36} | 2.2 | ||||||
| 25* | 6.0 | 0.50 | 15 | 4.41{0.45} | 1.9 | 7.5 | 14.0 | ||
| 30* | 18 | 5.29{0.54} | 2.3 | ||||||
| 6-15* | 7.0 | 0.50 | 9 | 2.65{0.27} | 1.9 | 5.0 | 9.0 | ||
| 20* | 7.1 | 0.55 | 12 | 3.53{0.36} | 2.0 | 6.6 | 11.0 | ||
| 25* | 15 | 4.41{0.45} | 2.5 | ||||||
| 30* | 18 | 5.29{0.54} | 3.0 | ||||||
| 35* | 7.2 | 0.60 | 21 | 6.17{0.63} | 2.7 | 9.0 | 14.0 | ||
| 40* | 24 | 7.06{0.72} | 3.0 | ||||||
| 60* | 7.4 | 0.70 | 36 | 10.59{1.08} | 2.5 | 18.2 | 25.0 | ||
| 8-20* | 9.3 | 0.65 | 12 | 3.53{0.36} | 2.4 | 6.8 | 9.5 | ||
| 25* | 15 | 4.41{0.45} | 2.9 | ||||||
| 30* | 9.4 | 0.70 | 18 | 5.29{0.54} | 2.7 | 9.1 | 12.0 | ||
| 35* | 21 | 6.17{0.63} | 3.2 | ||||||
| 40* | 24 | 7.06{0.72} | 3.6 | ||||||
| 60* | 9.6 | 0.80 | 36 | 10.58{1.08} | 3.2 | 16.8 | 20.0 | ||
| 10-20* | 11.4 | 0.70 | 12 | 3.53{0.36} | 3.3 | 5.6 | 7.0 | ||
| 25* | 11.5 | 0.75 | 15 | 4.41{0.45} | 3.1 | 7.5 | 9.0 | ||
| 30* | 11.6 | 0.80 | 18 | 5.29{0.54} | 2.7 | 10.4 | 12.0 | ||
| 35* | 21 | 6.17{0.63} | 3.2 | ||||||
| 40* | 24 | 7.06{0.72} | 3.6 | ||||||
| 12-25* | 13.6 | 0.80 | 15 | 4.41{0.45} | 3.6 | 7.2 | 8.0 | ||
| 16-35* | 18.0 | 1.00 | 21 | 6.17{0.63} | 4.7 | 9.5 | 8.5 | ||
| 40* | 24 | 7.06{0.72} | 5.3 | ||||||
[ ! ] Using it compressed to the solid length may cause deformation or break after a few uses.
Be sure to use the springs within the range of the allowable deflection F max.(mm).
[ ! ] I.D. Referenced Type is inner diameter prioritized, and the O.D. is a reference value.
[!] If the order quantity is 200 or more, the product may be delivered in excess quantity. Thank you for your understanding.
■E-GVUF: Fmax. (allowable deflection) = L × 45%
kgf (load) = N⋅mm (spring constant) × 0.101972 × F (Deflection)
[kgf] = N × 0.101972
[ ! ] Both ends of * marked springs are not ground.
[ ! ] Using it compressed to the solid length may cause deformation or break after a few uses.
Be sure to use the springs within the range of the allowable deflection F max.(mm).
[ ! ] I.D. Referenced Type is inner diameter prioritized, and the O.D. is a reference value.
[!] If the order quantity is 200 or more, the product may be delivered in excess quantity. Thank you for your understanding.
| Part Number | O.D. D1 (Reference Value) | Wire Dia. d | F max. | N (kgf) max. | Pitch (Reference Value) | Solid Length (Reference Value) | Total Coils (Reference Value) | ||
| Type D-L | |||||||||
| E-GVUF | 5-15* | 6.0 | 0.5 | 6.8 | 3.33{0.34} | 2.3 | 4.3 | 7.5 | |
| 6-15 | 7.2 | 0.6 | 6.8 | 3.33{0.34} | 1.9 | 6.0 | 9.0 | ||
| 20 | 9.0 | 4.41{0.45} | 2.5 | ||||||
| 25 | 11.3 | 5.49{0.56} | 3.1 | ||||||
| 8-20 | 9.4 | 0.7 | 9.0 | 4.41{0.45} | 3.1 | 6.0 | 7.5 | ||
| 10-40 | 11.8 | 0.9 | 18.0 | 8.82{0.90} | 4.4 | 9.9 | 10 | ||
[kgf] = N × 0.101972
[ ! ] Both ends of * marked springs are not ground.
[ ! ] Using it compressed to the solid length may cause deformation or break after a few uses.
Be sure to use the springs within the range of the allowable deflection F max.(mm).
[ ! ] I.D. Referenced Type is inner diameter prioritized, and the O.D. is a reference value.
[!] If the order quantity is 200 or more, the product may be delivered in excess quantity. Thank you for your understanding.
■Spring Constant (N/mm) [kgf/mm]
| O.D. D | O.D. Referenced | ||||||||
| E-GUV | E-GUY | E-GUR | E-GUF | E-GUL | E-GUTT | E-GUM | E-GUH | E-GUBB | |
| 2 | 0.05 {0.005} | 0.20 {0.02} | 0.30 {0.03} | 0.50 {0.05} | |||||
| 3 | 0.05 {0.005} | 0.098 {0.010} | 0.29 {0.03} | 0.49 {0.05} | 0.98 {0.1} | 1.5 {0.15} | |||
| 4 | 2.0 {0.2} | 2.9 {0.3} | 4.9 {0.5} | ||||||
| 5 | 2.0 {0.2} | ||||||||
| 6 | 2.9 {0.3} | 5.9 {0.6} | 9.8 {1.0} | ||||||
| 8 | |||||||||
| 10 | 0.200 {0.020} | ||||||||
| 12 | |||||||||
| 13 | 2.0 {0.2} | 2.9 {0.3} | 9.8 {1.0} | 19.6 {2.0} | |||||
| 16 | 0.49 {0.05} | ||||||||
| 20 | 0.98 {0.10} | 2.90 {0.3} | 4.9 {0.5} | 14.7 {1.5} | 29.4 {3.0} | ||||
| Fmax. | F = L × 70% | F = L × Fa% | F = L × Fa% | F = L × 45% | F = L × 40% | F = L × Fa% | F = L × 35% | F = L × 30% | F = L × 25% |
| I.D. D | I.D. Referenced | |||
| E-GVUR | E-GVUF | E-GVUL | E-GVUM | |
| 5 | 0.29 {0.03} | 0.49 {0.05} | 0.98 {0.10} | 2.94 {0.30} |
| 6 | ||||
| 8 | ||||
| 10 | ||||
| 12 | ||||
| 16 | ||||
| Fmax. | F= L × 60% | F= L × 45% | F= L × 40% | F= L × 35% |
Related Products
| [Economy Series]Compression Spring - O.D. Referenced Stainless Steel, Extra Light Load | [Economy Series]Compression Spring - O.D. Referenced Stainless Steel, Light Load | [Economy Series]Compression Spring - O.D. Referenced Stainless Steel, Heavy Load | ||
 |  |  | ||
| Type: E-GUF, E-GUR, E-GUV, E-GUY | Type: E-GUL, E-GUTT | Type: E-GUH, E-GUM |
Part Number
- Incomplete part number.
Please use left hand selections to complete a part number.Incomplete part number.
Please use left hand selections to complete a part number.
Loading...Tải…
| Part Number |
|---|
| E-GVUF6-20 |
| E-GVUR6-60 |
| E-GVUR8-60 |
| Part Number | Price | Minimum Order Qty. | Volume Discount | Days to ShipSố ngày giao hàng | Free Length L (mm) | Inner Dia. D-2d (or D) (Ø) | Outer Dia. D (or D1) (Ø) | Height with the max. load applied ([Free Length] – [Allowable Deflection]) (mm) | Spring Constant (N/mm) | Allowable Load (Configurable Range) (N) | Max. Load (N) | Wire Dia. (Ø) | Solid Length (mm) | Allowable Displacement (mm) | End Face State | Maximum Height when Loaded (Free Length, Allowable Deflection) (mm) | I.D. D (⌀) (φ) | Total Coils Nt *Reference Value |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
18,537 VND | 10 Piece(s) | Available | 4 Day(s) or more | 20 | 6 | 7.2 | 11 | 0.49 | 1.51~4.50 | 4.41 | 0.6 | 6 | 9 | With Grinding | 11 | 6 | 9 | |
22,439 VND | 10 Piece(s) | Available | 4 Day(s) or more | 60 | 6 | 7.4 | 24 | 0.29 | 8.51~16.00 | 10.59 | 0.7 | 18.2 | 36 | Without Grinding | 24 | 6 | 25 | |
29,268 VND | 10 Piece(s) | Available | 4 Day(s) or more | 60 | 8 | 9.6 | 24 | 0.29 | 8.51~16.00 | 10.58 | 0.8 | 16.8 | 36 | Without Grinding | 24 | 8 | 20 |
Loading...Tải…
Note
Cautions on UseOperating Temperature
Stainless Steel:: -10 to 100°C
* Load value attenuates when tension springs are used in temperature higher than above, although it depends on other conditions.
Stainless Steel Spring is magnetic.
Basic InformationThông tin cơ bản
| Material | SUS304-WPB | Cleaning Method | No Cleaning | Type | Round Wire |
|---|---|---|---|---|---|
| Environmentally friendly | RoHS Compliant (10 Substances) | Material Certificate: Materials | SUS304-WPB |
- The specifications and dimensions of some parts may not be fully covered. For exact details, refer toCác thông số kỹ thuật và kích thước của mã sản phẩm có thể không được bao phủ đầy đủ. Để biết chi tiết chính xác, hãy tham khảo manufacturer catalogsdanh mục nhà sản xuất ..
How can we improve?
How can we improve?
While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
Customer Privacy Policy
Thank you for your cooperation.
While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
Please use the inquiry form.
Customer Privacy Policy