(!) Since support from Microsoft will end on January 14th, 2020, Windows 7 will be excluded from the recommended environment from December 15th, 2019 on this site. Vì lý do Microsoft kết thúc hỗ trợ cho Windows 7 vào ngày 14/01/2020, Windows 7 sẽ là hệ điều hành không được khuyến khích sử dụng với trang web này từ ngày 15/12/2019.

Tel: 0222-361-1555 Email: [email protected] 8:00 - 17:00 (Mon - Sat)

ものづくりの、明日を支える。MISUMI-VONA 生産材コマースものづくりの、明日を支える。MISUMI-VONA 生産材コマース

Webcode Seach | Series: #CODE

Keyword suggestionsTừ khóa gợi ý

Part number suggestionsGợi ý mã sản phẩm

Discontinued Products

Search by Category / Brand Tìm theo danh mục, nhãn hiệu

Search by Category Tìm theo danh mục

[Thông báo] Cập nhật địa chỉ kho tập kết hàng hóa tại khu vực miền Nam của MISUMI Việt Nam. Xem chi tiết.
[Announcement] Update on warehouse address in the Southern region of MISUIMI Vietnam. See more. 
[Cảnh Báo] Thủ Đoạn Lừa Đảo Từ Nhân Viên Giao Hàng – Yêu Cầu Trả Phí Ship. Xem chi tiết.
[Warning] Fraud Calling from Shipper - Asking to Pay Shipping Fee. See more.

How can we improve?

How can we improve?

Comments

Name (Optional)

E-mail Address (Optional)

Tel (Optional)

While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
Customer Privacy Policy

Thank you for your cooperation.

While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
Please use the inquiry form.

Customer Privacy Policy

ConfigureTạo

Part number has not been determine

(1 Part Numbers Available)

Configure Remaining SpecificationsĐịnh cấu hình các thông số còn lại

Part Number CompleteĐã hoàn thành

E-GUH20-30

type Free Length L Inner Dia. D-2d (or D) Outer Dia. D (or D1) Height with the max. load applied ([Free Length] – [Allowable Deflection]) Spring Constant Allowable Load (Configurable Range) Max. Load Wire Dia. Solid Length Allowable Displacement End Face State I.D. D (⌀) Total Coils Nt *Reference Value Days to Ship

Specification/DimensionsĐặc điểm kỹ thuật / Kích thướcĐặc điểm kỹ thuật / Kích thước

type
- E-GUH
- E-GUM
ClearTrống
Free Length L(mm)
5

15

30

40

45
ClearTrống
Inner Dia. D-2d (or D)(Ø)
3.9

4

4.1

10

10.2

11.6

15.4

16.2
ClearTrống
Outer Dia. D (or D1)(Ø)
5

6

13

16

20
ClearTrống
Height with the max. load applied ([Free Length] – [Allowable Deflection])(mm)
3.25

3.5

10.5

19.5

21

26

31.5
ClearTrống
Spring Constant(N/mm)
2

2.9

4.9

5.9

9.8

14.7
ClearTrống
Allowable Load (Configurable Range)(N)
- 1.51~4.50
- 30.01~50.00
- 50.01~73.00
- 107.01~150.00
ClearTrống
Max. Load(N)
3.4

4.4

41.2

44.1

52

53

132.4
ClearTrống
Wire Dia.(Ø)
0.45

0.55

1

1.4

1.5

1.9

2.2

2.3
ClearTrống
Solid Length(mm)
2.25

3.3

9.2

13.3

13.8

15.1

15.5

25.1
ClearTrống
Allowable Displacement(mm)
1.5

1.75

4.5

9

10.5

13.5

14
ClearTrống
End Face State
- With Grinding
- Without Grinding
ClearTrống
I.D. D (⌀)(φ)
3.9

4

4.1

10

10.2

11.6

15.4

16.2
ClearTrống
Total Coils Nt *Reference Value
4

5

5.1

6

9.7

10.4

14.5
ClearTrống

Days to ShipSố ngày giao hàng

Alltất cả các

4 Day(s) or Less
ClearTrống

Specify AlterationsChỉ định thay đổi

Compression Spring - O.D. Referenced Stainless Steel, Heavy Load [RoHS Compliant] (E-GUH20-30)

Name: Compression Spring - O.D. Referenced Stainless Steel, Heavy Load [RoHS Compliant]
Brand: MISUMI
Price: 21463 VND
Availability: PreOrder

Compression Spring - O.D. Referenced Stainless Steel, Heavy Load [RoHS Compliant] (E-GUH20-30)

Click this image to zoom it.Nhấp vào hình ảnh này để phóng to.

Move the mouse over or click the image to zoom

Volume Discount

Brand :

MISUMI

MiSUMi Economy

MISUMI

Order Qty :
Total Price :

---
Days to ship :

---

Select part number to Order Now/ Add to Cart

CAD Download

(i)
Caution

thận trọng

This product can be purchased in quantities of 10pcs. Please enter your order quantity in multiples of 10. * Minimum order quantity (10 pcs. or more)
Since it is an O.D. referenced type spring, it is manufactured with priority given to O.D. tolerances. Please be careful.
Stainless Steel Spring is magnetic.

Product Description

＼RoHS10-compliant products are newly released.

Product Overview

[Product Comparison Information]
♢Economy series compression springs are manufactured overseas, resulting in significant cost reductions.
♢ Since it is an O.D. referenced type spring, it is manufactured with priority given to O.D. tolerances. Please be careful.
♢ Stainless Steel Spring is magnetic. Please be careful.

Item	MISUMI's Similar Products	Economy Series
Service Life	1 million times	700,000 Times
Manufactured	In Japan	Outside of Japan

Dimensional Drawing

Closed Ends (Both Ends Not Ground*) Closed Ends (Both Ends Ground) 0 -0.5 mm 0 -0.8 mm

O.D. D	ø10 or Less			Free Length L	±1 mm
	ø12 or More			Spring Constant	±10%

[M]Material SUS304-WPB

Specification Table

Ordering Example	Part Number
	E－GUH13－20

■E-GUM: Fmax. (allowable deflection) = L × 35%

Part Number		d	Solid Length (Reference Value)	F max.	N (kgf) max.	Fa%
Type	D－L
E-GUM	4-5*	0.40	2.20	1.75	3.4{0.35}	35
	10*	0.50	4.90	3.50	6.8{0.70}
	15	0.55	7.50	5.25	10.3{1.05}
	20	0.60	11.10	7.00	13.7{1.40}
	5-5*	0.45	2.25	1.75	3.4{0.35}
	10*	0.50	3.13	3.50	6.8{0.70}
	15	0.65	8.45	5.25	10.3{1.05}
	20			7.00	13.7{1.40}
	30	0.70	11.90	10.50	24{2.45}
	35	0.75	16.50	12.25	20.6{2.10}
	6-5*	0.55	2.70	1.70	4.9{0.50}
	10	0.70	5.60	3.50	10.8{1.10}
	15	0.75	7.40	5.20	15.7{1.60}
	20			7.00	20.6{2.10}
	25	0.85	12.80	8.70	25.5{2.60}
	30			10.50	31.4{3.20}
	35	0.90	16.70	12.20	36.3{3.70}
	40		16.80	14.00	41.2{4.20}
	8-10	0.85	6.40	3.50	10.8{1.10}
	15	0.90	7.90	5.30	15.7{1.60}
	20			7.00	20.6{2.10}
	25			8.80	25.5{2.60}
	30	1.00	12.00	10.50	31.4{3.20}
	35			12.30	36.3{3.70}
	10-10	0.90	5.20	3.50	10.8{1.10}
	15	1.00	7.30	5.30	15.7{1.60}
	20			7.00	20.6{2.10}
	25	1.10	10.50	8.80	25.5{2.60}
	30			10.50	31.4{3.20}
	13-15	1.20	8.40	5.30	15.7{1.60}
	20	1.30	11.10	7.00	20.6{2.10}
	25			8.80	25.5{2.60}
	40	1.40	15.10	14.00	41.2{4.20}
	20-30	1.90	13.30	10.50	52{5.30}

[ ! ] Both ends of * marked springs are not ground.
[ ! ] Using it compressed to the solid length may cause deformation or break after a few uses.
Be sure to use the springs within the range of the allowable deflection F max.(mm).
[ ! ] O.D. Referenced Type is outer diameter prioritized.
·How to Determine the Number of Winding (Reference Value): Total coils = solid length / wire diameter (d) - 1
Number of active coils = total coils - 2
* The values of the number of coils are for reference only. There may be some variations depending on the lot.

■E-GUH: Fmax. (allowable deflection) = L x 30%

Part Number		d	Solid Length (Reference Value)	F max.	N (kgf) max.	Fa%
Type	D－L
E-GUH	4-5*	0.45	2.70	1.5	4.4{0.45}	30
	10*	0.50	3.80	3.0	8.8{0.90}
	15	0.60	8.10	4.5	13.2{1.35}
	5-5*	0.55	3.30	1.5	4.4{0.45}
	10	0.60	4.65	3.0	8.8{0.90}
	15			4.5	13.2{1.35}
	25	0.75	11.81	7.5	22.1{2.25}
	6-5*	0.65	3.20	1.5	8.8{0.90}
	10	0.70	3.90	3.0	17.7{1.80}
	15	0.85	7.70	4.5	26.5{2.70}
	20	0.90	9.70	6.0	35.3{3.60}
	25	1.00	15.50	7.5	44.1{4.50}
	30			9.0	53{5.41}
	8-10	0.90	5.30	3.0	17.7{1.80}
	15			4.5	26.5{2.70}
	20	1.10	11.00	6.0	35.3{3.60}
	25			7.5	44.1{4.50}
	30	1.20	15.90	9.0	53{5.40}
	10-15	1.10	6.90	4.5	26.5{2.70}
	20	1.20	9.30	6.0	35.3{3.60}
	25			7.5	44.1{4.50}
	30	1.30	12.70	9.0	53{5.40}
	35	1.40	17.50	10.5	61.8{6.30}
	13-15	1.50	9.20	4.5	44.1{4.50}
	20			6.0	58.8{6.00}
	25			7.5	73.5{7.50}
	30	1.80	18.00	9.0	88.3{9.00}
	16-45	2.20	25.10	13.5	132.4{13.51}
	20-30	2.30	13.80	9.0	132.4{13.51}

kgf (load) = N⋅mm (spring constant) × 0.101972 × F (Deflection)
[kgf] = N × 0.101972
[ ! ] Both ends of * marked springs are not ground.
[ ! ] Using it compressed to the solid length may cause deformation or break after a few uses.
Be sure to use the springs within the range of the allowable deflection F max.(mm).
[ ! ] O.D. Referenced Type is outer diameter prioritized.
·How to Determine the Number of Winding (Reference Value): Total coils = solid length / wire diameter (d) - 1
Number of active coils = total coils - 2
* The values of the number of coils are for reference only. There may be some variations depending on the lot.

■Spring Constant (N/mm) [kgf/mm]

O.D. D	O.D. Referenced
	E-GUV	E-GUY	E-GUR	E-GUF	E-GUL	E-GUTT	E-GUM	E-GUH	E-GUBB
2		0.05 {0.005}	0.20 {0.02}	0.30 {0.03}	0.50 {0.05}
3	0.05 {0.005}	0.098 {0.010}	0.29 {0.03}	0.49 {0.05}	0.98 {0.1}	1.5 {0.15}
4							2.0 {0.2}	2.9 {0.3}	4.9 {0.5}
5						2.0 {0.2}
6							2.9 {0.3}	5.9 {0.6}	9.8 {1.0}
8
10		0.200 {0.020}
12
13						2.0 {0.2}	2.9 {0.3}	9.8 {1.0}	19.6 {2.0}
16				0.49 {0.05}
20				0.98 {0.10}	2.90 {0.3}		4.9 {0.5}	14.7 {1.5}	29.4 {3.0}
Fmax.	F = L × 70%	F = L × Fa%	F = L × Fa%	F = L × 45%	F = L × 40%	F = L × Fa%	F = L × 35%	F = L × 30%	F = L × 25%

I.D. D	I.D. Referenced
I.D. D	E-GVUR	E-GVUF	E-GVUL	E-GVUM
5	0.29 {0.03}	0.49 {0.05}	0.98 {0.10}	2.94 {0.30}
6
8
10
12
16
Fmax.	F= L × 60%	F= L × 45%	F= L × 40%	F= L × 35%

Part Number

Incomplete part number.
Please use left hand selections to complete a part number.Incomplete part number.
Please use left hand selections to complete a part number.

Loading...Tải…

: 30; 45; 60

Part Number
E-GUH20-30

Part Number	Price	Minimum Order Qty.	Volume Discount	Days to ShipSố ngày giao hàng	Free Length L (mm)	Inner Dia. D-2d (or D) (Ø)	Outer Dia. D (or D1) (Ø)	Height with the max. load applied ([Free Length] – [Allowable Deflection]) (mm)	Spring Constant (N/mm)	Allowable Load (Configurable Range) (N)	Max. Load (N)	Wire Dia. (Ø)	Solid Length (mm)	Allowable Displacement (mm)	End Face State	I.D. D (⌀) (φ)	Total Coils Nt *Reference Value
	21,463 VND	10 Piece(s)	Available	4 Day(s) or more	30	15.4	20	21	14.7	107.01~150.00	132.4	2.3	13.8	9	With Grinding	15.4	5

Loading...Tải…

Note

Cautions on Use
Operating Temperature
Stainless Steel:: -10 to 100°C
* Load value attenuates when tension springs are used in temperature higher than above, although it depends on other conditions.
Stainless Steel Spring is magnetic.

Basic InformationThông tin cơ bản

Material	SUS304-WPB	Cleaning Method	No Cleaning	Type	Round Wire
Environmentally friendly	RoHS Compliant (10 Substances)	Material Certificate: Materials	SUS304-WPB

Please check the type/dimensions/specifications of the part E-GUH20-30 in the Compression Spring - O.D. Referenced Stainless Steel, Heavy Load [RoHS Compliant] series.Vui lòng kiểm tra kiểu/kích thước/thông số kỹ thuật của phần E-GUH20-30 trong chuỗi Compression Spring - O.D. Referenced Stainless Steel, Heavy Load [RoHS Compliant].

The specifications and dimensions of some parts may not be fully covered. For exact details, refer toCác thông số kỹ thuật và kích thước của mã sản phẩm có thể không được bao phủ đầy đủ. Để biết chi tiết chính xác, hãy tham khảo manufacturer catalogsdanh mục nhà sản xuất ..

Products like this...

Part Number
E-GUH13-15
E-GUH16-45
E-GUH5-5
E-GUH6-30
E-GUM13-40
E-GUM20-30

Standard Unit Price	Minimum order quantity	Volume Discount	Days to ShipSố ngày giao hàng	Free Length L (mm)	Inner Dia. D-2d (or D) (Ø)	Outer Dia. D (or D1) (Ø)	Height with the max. load applied ([Free Length] – [Allowable Deflection]) (mm)	Spring Constant (N/mm)	Allowable Load (Configurable Range) (N)	Max. Load (N)	Wire Dia. (Ø)	Solid Length (mm)	Allowable Displacement (mm)	End Face State	I.D. D (⌀) (φ)	Total Coils Nt *Reference Value
13,659 VND	10 Piece(s)	Available	4 Day(s) or more	15	10	13	10.5	9.8	30.01~50.00	44.1	1.5	9.2	4.5	With Grinding	10	5.1
23,415 VND	10 Piece(s)	Available	4 Day(s) or more	45	11.6	16	31.5	9.8	107.01~150.00	132.4	2.2	25.1	13.5	With Grinding	11.6	10.4
12,683 VND	10 Piece(s)	Available	4 Day(s) or more	5	3.9	5	3.5	2.9	1.51~4.50	4.4	0.55	3.3	1.5	Without Grinding	3.9	5
14,634 VND	10 Piece(s)	Available	4 Day(s) or more	30	4	6	21	5.9	50.01~73.00	53	1	15.5	9	With Grinding	4	14.5
13,659 VND	10 Piece(s)	Available	4 Day(s) or more	40	10.2	13	26	2.9	30.01~50.00	41.2	1.4	15.1	14	With Grinding	10.2	9.7
20,488 VND	10 Piece(s)	Available	4 Day(s) or more	30	16.2	20	19.5	4.9	50.01~73.00	52	1.9	13.3	10.5	With Grinding	16.2	6

Top of the page

About MISUMIVề Misumi

About this WebsiteVề trang Web này

Useful ToolsCác công cụ hữu ích

Customer ServiceDịch vụ chăm sóc khách hàng

MISUMI Contact Monday to Saturday: 8:00 am - 5:00 pm Order cut off time is 5:00 pm Thứ 2 đến Thứ 7: 8 giờ sáng đến 5 giờ chiều Hạn chót đặt hàng là 5 giờ chiều

Tel:Số điện thoại:0222-361-1555
Fax:Số Fax:0222-361-2555
InquiryYêu cầu

MISUMI APP

Install MISUMI APP

MISUMI Vietnam Company Limited, Legal Representative: Tomohiro Watanabe,
phone: 0222-361-1555, e-mail: [email protected], Enterprise Code: 0107514576,
Date of Issuance: 22 July 2016, Place of Issuance: Bac Ninh, Business Certificate No. 6573041568-KD dated 27 September 2016 issued by the People's Committee of Bac Ninh

Công ty TNHH MISUMI Việt Nam, Đại diện theo pháp luật: Tomohiro Watanabe,
Điện thoại: 0222-361-1555, e-mail: [email protected], Mã số doanh nghiệp: 0107514576,
ngày cấp 22/7/2016, nơi cấp: Bắc Ninh, Giấy phép kinh doanh số: 6573041568-KD ngày cấp 27/9/2016 bởi UBND tỉnh Bắc Ninh

[Economy Series]Compression Spring - O.D. Referenced Stainless Steel, Extra Light Load	[Economy Series]Compression Spring - O.D. Referenced Stainless Steel, Light Load	[Economy Series]Compression Spring - O.D. Referenced Stainless Steel, Heavy Load

Type: E-GUF, E-GUR, E-GUV, E-GUY	Type: E-GUL, E-GUTT	Type: E-GUH, E-GUM

[Economy Series]Compression Spring - O.D. Referenced Stainless Steel, Extra Heavy Load	[Economy Series]Compression Spring - I.D. Referenced Stainless Steel, Light Load	[Economy Series]Compression Spring - I.D. Referenced Stainless Steel, Heavy Load

Type: E-GUBB	Type: E-GVUF, E-GVUR	Type: E-GVUL, E-GVUM

Search by Category / Brand Tìm theo danh mục, nhãn hiệu

Search by Category Tìm theo danh mục

How can we improve?

ConfigureTạo

Specification/DimensionsĐặc điểm kỹ thuật / Kích thướcĐặc điểm kỹ thuật / Kích thước

type

Free Length L(mm)

Inner Dia. D-2d (or D)(Ø)

Outer Dia. D (or D1)(Ø)

Height with the max. load applied ([Free Length] – [Allowable Deflection])(mm)

Spring Constant(N/mm)

Allowable Load (Configurable Range)(N)

Max. Load(N)

Wire Dia.(Ø)

Solid Length(mm)

Allowable Displacement(mm)

End Face State

I.D. D (⌀)(φ)

Total Coils Nt *Reference Value