(!) Since support from Microsoft will end on January 14th, 2020, Windows 7 will be excluded from the recommended environment from December 15th, 2019 on this site. Vì lý do Microsoft kết thúc hỗ trợ cho Windows 7 vào ngày 14/01/2020, Windows 7 sẽ là hệ điều hành không được khuyến khích sử dụng với trang web này từ ngày 15/12/2019.
Tel: 0222-361-1555
Email: [email protected]
8:00 - 17:00 (Mon - Sat)
Search by Category / Brand Tìm theo danh mục, nhãn hiệu
Search by Category Tìm theo danh mục
- [Thông báo] Cập nhật địa chỉ kho tập kết hàng hóa tại khu vực miền Nam của MISUMI Việt Nam. Xem chi tiết.
[Announcement] Update on warehouse address in the Southern region of MISUIMI Vietnam. See more. - [Cảnh Báo] Thủ Đoạn Lừa Đảo Từ Nhân Viên Giao Hàng – Yêu Cầu Trả Phí Ship. Xem chi tiết.
[Warning] Fraud Calling from Shipper - Asking to Pay Shipping Fee. See more.
Product DetailSpecification/DimensionsĐặc điểm kỹ thuật / Kích thướcĐặc điểm kỹ thuật / Kích thước
-
Nominal Mounting Screw [M]
-
type
- E-MSZXAD□□□□
- E-MSZXAD□□□□□
-
Stroke(mm)
-
Max. Absorbed Energy(J)
-
Nominal Mounting Screw [Inch]
-
Max. Collision Velocity(m/s)
-
Mating Accessories 1 - Stopper Nut
- Not Provided
- Provided
-
Mating Accessories 2 - Mounting Flange
- Not Provided
- Provided
-
CADCAD
- 2D
- 3D
Days to ShipSố ngày giao hàng
-
- Alltất cả các
- Same day
- 8 Day(s) or Less
- 11 Day(s) or Less
Specify AlterationsChỉ định thay đổi
Shock Absorbers, Heavy Load Absorption Type (E-MSZXAD64050-F)
- Volume Discount
Copy Part Number URL to Clipboard
The part number URL has been copied into your clipboard.
-
- From :
- 1,989,343VND/Unit
-
- Order Qty :
-
-
- Total Price :
- ---
-
- Days to ship :
- ---
Select part number to Order Now/ Add to Cart
(i)
Caution
thận trọng
- **RoHS Compliant is available for some part numbers.
Please contact with MISUMI for detail effective date.
Similar Products
Product DetailProduct Description
- Shock Absorbers, Heavy Load Absorption Type from MISUMI
- Good abrasion resistance by utilizing special oil seal.
- Enhance cushioning stability due to good surface finishing.
- The spring is made of German piano wire.
- Extend mechanical life, The service life of Shock Absorbers from MISUMI is up to 800,000 times.
- Max. Collision Velocity(m/s): 4.8 m/s
- Operating Environment Temperature: -5 to 70℃
- Significantly reduce noise and provide a quiet working environment.
- Improve the safety of mechanical running.
Economy Heavy Load Absorption Shock Absorber
- High Energy Absorption Capacity: Designed for heavy loads, it effectively absorbs high-energy impacts due to its unique internal pressure cylinder combination structure.
- Adjustable Energy Absorption: Optimize shock absorption by rotating the adjuster for tailored performance.
- Improved Production Efficiency: Smoothly stops impact objects, allowing for higher operating speeds and increased production output.
- Extended Mechanical Life: Reduces impact and vibration, protecting machinery and extending its lifespan.
- Noise Reduction: Significantly decreases noise levels, creating a quieter working environment.
MISUMI Standard
Cheaper Price
Product Variety
3D CAD Support
Product of Shock Absorbers Overview
The economy series heavy load Shock Absorbers has a unique internal pressure cylinder combination structure, capable of absorbing high energy impact load.
Optimal energy absorption effect is achievable by rotating the adjuster.
The advantages of using Shock Absorbers:
1. Improve production efficiency: equipment can be operated at high frequency and high speed to improve production efficiency because the shock absorber can stop the impact object smoothly.
2. Extend mechanical life: the buffer can absorb the energy generated by the impact, greatly reduce the impact and vibration caused by the object to the machine, and avoid damage due to impact vibration.
3. Improve Shock Absorbers product quality: the buffer eliminates the shock caused by impact objects and the damaging impact, allowing the smooth operation of the machine and equipment, and improving the product quality.
4. Significantly reduce noise, and provide a quiet working environment.
5. Improve the safety of mechanical running.
Product of Shock Absorbers Features
2. Miniaturized design and strong space adaptability.
3. Shock Absorbers energy smoothly and softly.
4. Shock Absorbers Abundant stock and fast delivery.
5. Long life with 800,000 times being used for reference.
Dimensional Shock Absorbers Drawing
Specifications of Shock Absorbers Overview
| Impact Speed Type | Maximum Collision Velocity | Operating Environment Temperature | Reference number of replacements |
| Heavy Load Absorption Type | ～4.8m/s | -5 to 70℃ | 800,000 cycles |
■Shock Absorbers Material Table
 Shock Absorbers Material |  Shock Absorbers Surface Treatment | |
| Body | Cover | |
| STKM11A | Urethane | Ferroferric Oxide Protective Film |
Example of Shock Absorbers Use
Example of Shock Absorbers Use 1
Example of Shock Absorbers Use 2
Precautions Shock Absorbers
| Coarse Outer Diameter (mm) | M8×1.0 | M10×1.0 | M12×1.0 | M14×1.5 | M20×1.5 | M25×1.5 | M27×1.5 |
| Tightening torque of nut (N.m) | 3.9 | 7.8 | 7.8 | 9.8 | 29.4 | 49 | 58.8 |
2. Pay attention to check whether the head circlip is off.
■ Overloaded buffer will cause abnormal increase in the internal pressure of the buffer tube, making the head circlip off, and internal parts may pop up and cause injury.
■ When the buffer with the head circlip is working, please keep your face and other parts away from it.
3. Please pay attention to the splash of the broken buffer head due to impact.
■ Shock Absorbers Overload use will cause damage to the head, resulting in injury.
■ It is recommended to install an anti-splashing cover.
4. Please pay attention to lateral misalignment load and lateral misalignment angle.
■ When the lateral misalignment load exceeds ±2.5 degrees, it will cause piston rod bending, bad reset, and internal lateral misalignment friction, resulting in performance degradation and even product breakage.
Please aim at the center line of the buffer piston rod for impact. (If the lateral misalignment angle is greater than ±2.5 degrees, please use the angular misalignment Shock Absorbers (the range of lateral misalignment:± within 10 degrees)
5. Operating Temperature Range
■ Please use the buffer within the specified temperature range.
▪ Use outside the specified range will reduce the life of the seal packing and the pressure accumulating sponge, and cause the buffer to break.
6. Operating Environment Requirements
■ Please do not use it under medium or high pressure in a vacuum environment.
■ Keep the guide shaft clean, and avoid cutting powder, cutting fluid, water, etc. from being attached to the guide shaft, otherwise it will cause seal damage, oil leakage, poor buffer action, and buffer damage.
※ If you need to use it in the cutting fluid environment, please Shock Absorbers choose Misumi’s cutting fluid resistant buffer series products. See Misumi's official website.
8. Shock Absorbers To prevent the buffer from increasing lateral load, the distance between the installation position of the buffer and the fulcrum should be equal to or greater than 6 times of the buffer stroke.
And when the side load and the buffer center line form an angle of 5°, the Shock Absorbers energy is the maximum.
Part Number
- Incomplete part number.
Please use left hand selections to complete a part number.Incomplete part number.
Please use left hand selections to complete a part number.
| Part Number |
|---|
| E-MSZXAD64050-F |
| Part Number | Price | Minimum Order Qty. | Volume Discount | Days to ShipSố ngày giao hàng | Nominal Mounting Screw [M] | Stroke (mm) | Max. Absorbed Energy (J) | Nominal Mounting Screw [Inch] | Max. Collision Velocity (m/s) | Mating Accessories 1 - Stopper Nut | Mating Accessories 2 - Mounting Flange |
|---|---|---|---|---|---|---|---|---|---|---|---|
5,568,350 VND | 1 Piece(s) | Available | 8 Day(s) | - | 50 | 1200 | UNF2-1/2 | 3.5 | Not Provided | Provided |
Loading...Tải…
| NO. | Mounting Screw Nominal (M) | Stroke (S) | Maximum Energy Absorbed (E') | Maximum Equivalent Mass (me') (kg) | Maximum Collision Velocity (M/S) | Total Length (L) | L1 | L2 | T | t | d | d1 | G | B (Both sides width) | |
| Per Cycle (J) | Per minute (J) | ||||||||||||||
| 4225 | M42×1.5 | 25.0 | 260.0 | 2160.0 | 3000.0 | 3.6 | 191.0 | 98.5 | 20.0 | 15.0 | 33.5 | 44.5 | 12.0 | 14.0 | 50.0 |
| 4250 | M42×1.5 | 50.0 | 500.0 | 2580.0 | 4000.0 | 4.8 | 258.0 | 135.5 | 20.0 | 15.0 | 38.5 | 44.5 | 12.0 | 14.0 | 50.0 |
| 4275 | M42×1.5 | 75.0 | 750.0 | 3110.0 | 6000.0 | 4.8 | 308.0 | 160.5 | 20.0 | 15.0 | 38.5 | 44.5 | 12.0 | 14.0 | 50.0 |
| 64050 | UNF 2 1/2-12 | 50.0 | 12000.0 | 26000.0 | 12727.0 | 3.5 | 247.0 | 26.0 | 97.0 | 10.0 | 51.0 | 59.0 | 20.0 | 23.0 | 76.0 |
| 64100 | UNF 2 1/2-12 | 100.0 | 24000.0 | 32000.0 | 18181.0 | 3.5 | 347.0 | 26.0 | 147.0 | 10.0 | 51.0 | 59.0 | 20.0 | 23.0 | 76.0 |
| 64150 | UNF 2 1/2-12 | 150.0 | 36000.0 | 42000.0 | 23636.0 | 3.5 | 467.0 | 26.0 | 207.0 | 10.0 | 61.0 | 59.0 | 20.0 | 23.0 | 76.0 |
Basic InformationThông tin cơ bản
| Structure | Adjustable | Main Body, Related Components | Main Body | Orifice Type | Irregular Multi Orifice |
|---|---|---|---|---|---|
| Operating Environment | Standard | Body Material | STKM11A | Operating Temperature Range(°C) | -5::70 |
Please check the type/dimensions/specifications of the part E-MSZXAD64050-F in the Shock Absorbers, Heavy Load Absorption Type series.Vui lòng kiểm tra kiểu/kích thước/thông số kỹ thuật của phần E-MSZXAD64050-F trong chuỗi Shock Absorbers, Heavy Load Absorption Type.
- The specifications and dimensions of some parts may not be fully covered. For exact details, refer toCác thông số kỹ thuật và kích thước của mã sản phẩm có thể không được bao phủ đầy đủ. Để biết chi tiết chính xác, hãy tham khảo manufacturer catalogsdanh mục nhà sản xuất ..
Frequently asked question (FAQ)FAQ
- Question:Question: What are the advantages of the economy series heavy load shock absorber? What are its applications?
- Answer:Answer: The economy series heavy load shock absorber has a unique internal pressure cylinder combination structure, capable of absorbing high energy impact load; it is commonly used in high load automotive industry, die casting mold, truss machine, etc.
- Question:Question: Is there a quantity discount for economy series heavy load shock absorber? What is the delivery time?
- Answer:Answer: The economy series heavy load shock absorber offers stepped discount, more discounts for more purchases. The products are stock items, and the delivery time is 1 day for the quantity less than 20 pieces.
Products like this...
| Part Number |
|---|
| E-MSZXAD4225-SC-F |
| E-MSZXAD4250 |
| E-MSZXAD4275 |
| E-MSZXAD64100 |
| E-MSZXAD64100-F |
| E-MSZXAD64150 |
| Part Number | Standard Unit Price | Minimum order quantity | Volume Discount | Days to ShipSố ngày giao hàng | Nominal Mounting Screw [M] | Stroke (mm) | Max. Absorbed Energy (J) | Nominal Mounting Screw [Inch] | Max. Collision Velocity (m/s) | Mating Accessories 1 - Stopper Nut | Mating Accessories 2 - Mounting Flange |
|---|---|---|---|---|---|---|---|---|---|---|---|
2,641,865 VND | 1 Piece(s) | Available | 8 Day(s) | 42 | 25 | 260 | - | 3.6 | Provided | Provided | |
2,149,102 VND | 1 Piece(s) | Available | Same day | 42 | 50 | 500 | - | 4.8 | Not Provided | Not Provided | |
2,306,979 VND | 1 Piece(s) | Available | Same day | 42 | 75 | 750 | - | 4.8 | Not Provided | Not Provided | |
5,943,375 VND | 1 Piece(s) | Available | Same day | - | 100 | 24000 | UNF2-1/2 | 3.5 | Not Provided | Not Provided | |
6,338,875 VND | 1 Piece(s) | Available | 8 Day(s) | - | 100 | 2400 | UNF2-1/2 | 3.5 | Not Provided | Provided | |
6,746,922 VND | 1 Piece(s) | Available | 11 Day(s) | - | 150 | 36000 | UNF2-1/2 | 3.5 | Not Provided | Not Provided |
How can we improve?
How can we improve?
While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
Customer Privacy Policy
Thank you for your cooperation.
While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
Please use the inquiry form.
Customer Privacy Policy