Why is the order model of the timing belt inconsistent with the actual belt label and engraving?

Order model is MISUMI product model, the label on the belt or printed model on the belt surface is the belt manufacturer model, which varies with manufacturer, but there will be no influence on the product itself.

The timing belt has been broken after use for a very short period of time. Is there a problem with the quality of the belt?

The timing belt is a standard product, and the same batch of products have very few individual quality problems, please refer to Main causes of premature breakage and corresponding countermeasures to troubleshoot the equipment in use.

Can alteration be made to the timing belt?

Alteration cannot be made to the circumference of the timing belt, and partial alteration can be made to the width.

What kind of belt is better to use under conditions that require high cleanliness?

The use of urethane belts is recommended, which has significantly improved dust drop, compared to the rubber belt.

What are the two main types of timing belts according to their functions? What is the role?

Timing belts are mainly divided into transmission type and driving type. For transmission type, the load can be placed on the timing belt surface for transmission. For driving type, no load is carried, and only the role of transmitting torque is played, which is similar to the role of chain.

How to judge or measure whether the belt tension meets the installation requirements?

It is recommended that the customer purchase the tension meter by himself and make a judgment according to the calculation formula of the initial design.

Which tooth type of the timing belt has the smallest clearance? What will it affect?

The arc tooth type has minimum clearance, which can improve such indicators as positioning accuracy and rigidity.

(!) Since support from Microsoft will end on January 14th, 2020, Windows 7 will be excluded from the recommended environment from December 15th, 2019 on this site. Vì lý do Microsoft kết thúc hỗ trợ cho Windows 7 vào ngày 14/01/2020, Windows 7 sẽ là hệ điều hành không được khuyến khích sử dụng với trang web này từ ngày 15/12/2019.

Tel: 0222-361-1555 Email: [email protected] 8:00 - 17:00 (Mon - Sat)

ものづくりの、明日を支える。MISUMI-VONA 生産材コマースものづくりの、明日を支える。MISUMI-VONA 生産材コマース

Webcode Seach | Series: #CODE

Keyword suggestionsTừ khóa gợi ý

Part number suggestionsGợi ý mã sản phẩm

Discontinued Products

Search by Category / Brand Tìm theo danh mục, nhãn hiệu

Search by Category Tìm theo danh mục

[Thông báo] Cập nhật địa chỉ kho tập kết hàng hóa tại khu vực miền Nam của MISUMI Việt Nam. Xem chi tiết.
[Announcement] Update on warehouse address in the Southern region of MISUIMI Vietnam. See more. 
[Cảnh Báo] Thủ Đoạn Lừa Đảo Từ Nhân Viên Giao Hàng – Yêu Cầu Trả Phí Ship. Xem chi tiết.
[Warning] Fraud Calling from Shipper - Asking to Pay Shipping Fee. See more.

How can we improve?

How can we improve?

Comments

Name (Optional)

E-mail Address (Optional)

Tel (Optional)

While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
Customer Privacy Policy

Thank you for your cooperation.

While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
Please use the inquiry form.

Customer Privacy Policy

ConfigureTạo

Part number has not been determine

(109 Part Numbers Available)

Configure Remaining SpecificationsĐịnh cấu hình các thông số còn lại

Part Number CompleteĐã hoàn thành

C-TTBN1000T10-250

Circumference Length Number of Teeth type Belt Type Belt Width (mm) CAD Days to Ship

Specification/DimensionsĐặc điểm kỹ thuật / Kích thướcĐặc điểm kỹ thuật / Kích thước

Circumference Length(mm)
320

400

440

450

480

500

510

530

560

570

600

610

630

640

650

660

680

690

700

720

750

780

810

840

850

880

910

920

960

970

980

990

1010

1050

1080

1110

1120

1140

1150

1170

1200

1210

1240

1250

1260

1280

1300

1310

1320

1350

1390

1400

1420

1500

1600

1610

1750

1800

1880

1960

2020

3300

3500
ClearTrống
Number of Teeth
32

40

44

45

48

50

51

53

56

57

60

61

63

64

65

66

68

69

70

72

75

78

81

84

85

88

91

92

96

97

98

99

101

105

108

111

112

114

115

117

120

121

124

125

126

128

130

131

132

135

139

140

142

150

160

161

175

180

188

196

202

330

350
ClearTrống
type
- C-TTBN□□T10
ClearTrống
Belt Type
- T10
ClearTrống
Belt Width (mm)(mm)
15

20

25

30

40

50
ClearTrống
CADCAD
- 2D
- 3D
ClearTrống

Days to ShipSố ngày giao hàng

Alltất cả các

Same day

8 Day(s) or Less

10 Day(s) or Less

12 Day(s) or Less

13 Day(s) or Less
ClearTrống

Specify AlterationsChỉ định thay đổi

Timing Belts T10 (Part Number)

Until 31/12/2024
Volume Discount

Check FAQ of this product (7 items)

Brand :

MiSUMi Economy

Part Number :

C-TTBN1000T10-250 SALE

C-TTBN1010T10-250 SALE

C-TTBN1040T10-250 SALE

C-TTBN1050T10-250 SALE

C-TTBN1080T10-250 SALE

C-TTBN1100T10-250 SALE

C-TTBN1110T10-250 SALE

C-TTBN1120T10-250 SALE

C-TTBN1140T10-250 SALE

C-TTBN1150T10-250 SALE

C-TTBN1170T10-250 SALE

C-TTBN1200T10-250 SALE

C-TTBN1210T10-250 SALE

C-TTBN1240T10-250 SALE

C-TTBN1250T10-250 SALE

C-TTBN1260T10-250 SALE

C-TTBN1280T10-250 SALE

C-TTBN1300T10-250 SALE

C-TTBN1310T10-250 SALE

C-TTBN1320T10-250 SALE

C-TTBN1000T10-250

Order Qty :
Total Price :

---
Days to ship :

---

Select part number to Order Now/ Add to Cart

CAD Download

(i)
Caution

thận trọng

**RoHS Compliant is available for some part numbers.
Please contact with MISUMI for detail effective date.

Product Description

Timing Belts T10
It is a trapezoidal tooth profile timing belt. This belt always uses for regular torque transmission in an automation machine
[Features]
• Belt Shape: Closed End
• Belt Tooth Type: T10 (trapezoidal tooth profile)
• Tooth Pitch: 10 mm.
• Belt Width: 15, 25, 30, 40 and 50 mm.
• Circumference Length Shortest/Longest: 320 mm. and 3500 mm.
• Belt Operating Temperature Range: 0 to 80℃.
• Material:
Tooth rubber: Chloroprene
Core wire: Glass Fiber
[Applications]
Suitable for use with a timing pulley in a transmission system in an automation machine
See more ...

Economy T10 Timing Belt

Enhanced LoadDurable ChloropreneTooth Height

- With increased belt width options and a wider range of lengths, our T10 belts are built to handle the heaviest loads and most challenging conditions.

- Constructed with high-quality chloroprene rubber, these belts excel in resisting abrasion, oil, and grease, ensuring extended service life even in harsh environments.

- The accurately designed trapezoidal tooth profile guarantees smooth and efficient power transmission, minimizing noise and vibration for optimal performance.

- Engineered to function reliably in temperatures ranging from 0°C to 80°C, these belts offer versatility across various operating conditions.

- Featuring a taller tooth profile compared to standard timing belts, the T10 provides superior grip and power transmission, reducing the risk of slippage.

MISUMI Standard

Cheaper Price

Product Variety

3D CAD
3D CAD Support

Product Overview

Usually, timing pulleys and timing belt are widely used to design mechanisms for transmitting rotational power generated by motors.
Driving and transmission are realized through the engagement between the teeth of timing pulleys and timing belts.

Dimensional Drawing

■Material/Specification Table

	Material
①Body	Chloroprene
②Core Wire	Glass Fiber

Specifications Overview

Types	Tooth pitch	H	h	L	Unit weight g/m (Width: 10mm)
T10	10	4.5	2.5	3.5	42

Operating Temperature 0 to 80℃

Belt circumference length is core wire length

MISUMI makes no commitment to this product brand

The model number on the back of the product is the supplier model.

For the transmission capacity and design method of economy series timing belt, please refer to the national standard (GB) design manual.

Specification Table

■ Specification Table
Ordering Example of MISUMI (Economic Type) Toothed Timing Belt

Types	Tooth pitch	H	h	L	Unit weight g/m (Width: 10mm)
T10	10	4.5	2.5	3.5	42

■ Type T10 (Tooth pitch: 10mm)

Part Number		Belt Nominal Width	Number of Teeth	Belt Circumference Length (mm)
Type	Belt Number	Belt Nominal Width	Number of Teeth	Belt Circumference Length (mm)
C-TTBN	260T10	150 (15mm) 200 (20mm) 250 (25mm) 300 (30mm) 400 (40mm) 500 (50mm)	26	260
	320T10		32	320
	330T10		33	330
	340T10		34	340
	370T10		37	370
	380T10		38	380
	400T10		40	400
	410T10		41	410
	420T10		42	420
	440T10		44	440
	450T10		45	450
	460T10		46	460
	480T10		48	480
	500T10		50	500
	510T10		51	510
	520T10		52	520
	530T10		53	530
	540T10		54	540
	550T10		55	550
	560T10		56	560
	570T10		57	570
	580T10		58	580
	600T10		60	600
	610T10		61	610
	630T10		63	630
	640T10		64	640
	650T10		65	650
	660T10		66	660
	680T10		68	680
	690T10		69	690
	700T10		70	700
	710T10		71	710
	720T10		72	720
	730T10		73	730
	750T10		75	750
	770T10		77	770
	780T10		78	780
	800T10		80	800
	810T10		81	810
	840T10		84	840
	850T10		85	850
	870T10		87	870
	880T10		88	880
	890T10		89	890
	900T10		90	900
	910T10		91	910
	920T10		92	920
	950T10		95	950
	960T10		96	960
	970T10		97	970
	980T10		98	980
	990T10		99	990
	1000T10		100	1000
	1010T10		101	1010
	1040T10		104	1040
	1050T10		105	1050
	1080T10		108	1080
	1100T10		110	1100
	1110T10		111	1110
	1120T10		112	1120
	1140T10		114	1140
	1150T10		115	1150
	1170T10		117	1170
	1200T10		120	1200
1210T10	121	1210
1240T10	124	1240
1250T10	125	1250
1260T10	126	1260
1280T10	128	1280
1300T10	130	1300
1310T10	131	1310
1320T10	132	1320
1350T10	135	1350
1390T10	139	1390
1400T10	140	1400
1420T10	142	1420
1440T10	144	1440
1450T10	145	1450
1460T10	146	1460
1480T10	148	1480
1500T10	150	1500
1560T10	156	1560
1580T10	158	1580
1600T10	160	1600
1610T10	161	1610
1630T10	163	1630
1640T10	164	1640
1700T10	170	1700
1750T10	175	1750
1780T10	178	1780
1800T10	180	1800
1860T10	186	1860
1880T10	188	1880
1960T10	196	1960
1980T10	198	1980
2020T10	202	2020
2100T10	210	2100
2120T10	212	2120
2200T10	220	2200
2250T10	225	2250
2300T10	230	2300
2480T10	248	2480
2500T10	250	2500
2600T10	260	2600
2800T10	280	2800
2850T10	285	2850
3000T10	300	3000
3300T10	330	3300
3460T10	346	3460
3500T10	350	3500
3700T10	370	3700

Product Features

		■ S type circular tooth profile rubber timing belt (S2M/S3M/S5M/S8M/S14M) Feature 1: Reasonable semi-circular arc tooth profile design can provide higher torque to adapt to high load transmission. Feature 2: Reduce the noise generated by high-speed operation. Feature 3: Tooth peak changes under force, ensuring a longer life than conventional circular tooth profile teeth. Feature 4: Have certain conductivity Feature 5: Operating Temperature Range: -30 to 90℃.
		■ P type circular tooth profile rubber timing belt (P5M/P8M) Feature 1: Reasonable semi-circular arc tooth profile design can provide higher torque to adapt to high load transmission. Feature 2: Special concave tooth peak design, better reducing noise generated by high-speed operation. Feature 3: Tooth peak changes under force, ensuring greater accuracy than conventional circular tooth profile teeth. Feature 4: Have certain conductivity Feature 5: Operating Temperature Range: -25 to 80℃.
		■ Trapezoidal tooth profile rubber timing belt (MXL/XL/H/T5/T10) Feature 1: Suitable for light load transmission, standard torque driving. Feature 2: Tooth rubber uses chloroprene to protect core wire, providing excellent bending fatigue resistance, heat resistance, oil resistance Feature 3: Ideal choice of economical and maintenance-free alternative to traditional transmission method. Feature 4: Have certain conductivity Feature 5: Operating Temperature Range: -30 to 90℃ (MXL/XL/H) , 0 to 80℃ (T5/T10)

Example of Use

Usage Method Example Drawing	Instructions for use of timing wheel and timing belt
	① Driving (The driven wheel is driven by the driving wheel for transmission)
	② Transmission (Used for repeated motion with the object not rotating and high requirements on positioning accuracy)

Usage Method Example Drawing	Instructions for use of timing wheel and timing belt
	③ Conveyance (Plates are conveyed by two timing toothed belts)
	④ Traction transmission (Workpieces are clamped and transmitted by the belt)

Usage Method

■ Installation method for timing belt transmission
①	Turn off the power supply, remove the protective cover, loosen the motor assembly bolts, move the motor so that the belt is loose enough. The belt can be removed without prying. Never try to pry the belt down.
②	Remove the old belt and check for abnormal wear. Excessive wear may mean that there are problems in the design or maintenance of the transmission device.
③	Choose the right belt to replace.
④	To clean the belt and pulley, wipe with a cloth dipped in a small amount of non-volatile liquid. Soaking in detergent or scrubbing the belt with detergent is not advisable. To remove grease, it is also undesirable to wipe with sandpaper or scratch with a sharp object. The belt must be kept dry before installation and use.
⑤	Check the pulley for abnormal wear or cracks. If the wear is excessive, the pulley must be replaced.
⑥	Check whether the pulley is linearly symmetrical. Linear symmetry of the pulley is essential for the operation of the timing belt, especially the timing belt transmission device. Asymmetry of the pulley is shown as follows:

⑦	Check the remaining transmission device components, such as bearings and bushings, for symmetry, durability, lubrication and other conditions.
⑧	Install a new belt on the pulley. Never pry or use too much force.
⑨	Tighten to narrow the center distance of the transmission device until the tension tester detects that the belt tension is appropriate. Turn the driving wheel several times with your hands. Re-test tension.
⑩	Tighten the assembly bolts of the motor and correct the torque. Since any change in the center distance of the transmission device during operation will result in poor belt performance, it is important to ensure that all transmission components have been tightened.
⑪	Start the device and observe the belt performance to see if there is abnormal vibration, and listen carefully if there is abnormal noise. It is best to turn off the machine and check the conditions of the bearing and motor. If it feels too hot to the touch, the belt may be too tight, the bearing may be asymmetrical, or the lubrication may be incorrect.

Precautions

① Do not bend the timing belt by force.
It is strictly forbidden to bend the belt, which easily causes breakage

Do not use in direct contact with water, solvent, oil, acid, alkali, UV, ozone, etc.

③ Please avoid using or keeping at extreme high or low temperatures beyond the operating temperature range, or in humid environments.
④ During installation and maintenance, be sure to cut off the power supply and confirm that the machine is completely stopped before proceeding.
⑤ When there may be impurities, be sure to set the guard.

Application Industries

Food	Semiconductor	Smartphone

Automotive	Electronic & Electrical Appliances	Medical

Related Products

High Torque Timing Pulleys T5 Type	Flat Belts For General Use	(Economy Series) Toothed Timing Belt S2M S3M S5M S8M S14M Type

Reference model: TTPA18T5100-A-NK10	Reference model: HBLT350-4.23	Reference model: C-HTBN400S2M-40
Reason for recommendation: short delivery time, multiple types	Reason for recommendation: intended use for transmission, rich variety of specifications and types	Reason for recommendation: rich variety of specifications, high cost performance

Part Number

Incomplete part number.
Please use left hand selections to complete a part number.Incomplete part number.
Please use left hand selections to complete a part number.

Loading...Tải…

: 30; 60; 90

Part Number
C-TTBN1000T10-250SALE
C-TTBN1010T10-250SALE
C-TTBN1040T10-250SALE
C-TTBN1050T10-250SALE
C-TTBN1080T10-250SALE
C-TTBN1100T10-250SALE
C-TTBN1110T10-250SALE
C-TTBN1120T10-250SALE
C-TTBN1140T10-250SALE
C-TTBN1150T10-250SALE
C-TTBN1170T10-250SALE
C-TTBN1200T10-250SALE
C-TTBN1210T10-250SALE
C-TTBN1240T10-250SALE
C-TTBN1250T10-250SALE
C-TTBN1260T10-250SALE
C-TTBN1280T10-250SALE
C-TTBN1300T10-250SALE
C-TTBN1310T10-250SALE
C-TTBN1320T10-250SALE
C-TTBN1350T10-250SALE
C-TTBN1390T10-250SALE
C-TTBN1400T10-250SALE
C-TTBN1420T10-250SALE
C-TTBN1440T10-250SALE
C-TTBN1450T10-250SALE
C-TTBN1460T10-250SALE
C-TTBN1480T10-250SALE
C-TTBN1500T10-250SALE
C-TTBN1560T10-250SALE
C-TTBN1580T10-250SALE
C-TTBN1600T10-250SALE
C-TTBN1610T10-250SALE
C-TTBN1630T10-250SALE
C-TTBN1640T10-250SALE
C-TTBN1700T10-250SALE
C-TTBN1750T10-250SALE
C-TTBN1780T10-250SALE
C-TTBN1800T10-250SALE
C-TTBN1860T10-250SALE
C-TTBN1880T10-250SALE
C-TTBN1960T10-250SALE
C-TTBN1980T10-250SALE
C-TTBN2020T10-250SALE
C-TTBN2100T10-250SALE
C-TTBN2120T10-250SALE
C-TTBN2200T10-250SALE
C-TTBN2250T10-250SALE
C-TTBN2300T10-250SALE
C-TTBN2480T10-250SALE
C-TTBN2500T10-250SALE
C-TTBN2600T10-250SALE
C-TTBN260T10-250SALE
C-TTBN2800T10-250SALE
C-TTBN2850T10-250SALE
C-TTBN3000T10-250SALE
C-TTBN320T10-250SALE
C-TTBN3300T10-250SALE
C-TTBN330T10-250SALE
C-TTBN340T10-250SALE
C-TTBN3460T10-250SALE
C-TTBN370T10-250SALE
C-TTBN380T10-250SALE
C-TTBN400T10-250SALE
C-TTBN410T10-250SALE
C-TTBN420T10-250SALE
C-TTBN440T10-250SALE
C-TTBN450T10-250SALE
C-TTBN460T10-250SALE
C-TTBN480T10-250SALE
C-TTBN500T10-250SALE
C-TTBN510T10-250SALE
C-TTBN520T10-250SALE
C-TTBN530T10-250SALE
C-TTBN540T10-250SALE
C-TTBN550T10-250SALE
C-TTBN560T10-250SALE
C-TTBN570T10-250SALE
C-TTBN580T10-250SALE
C-TTBN600T10-250SALE
C-TTBN610T10-250SALE
C-TTBN630T10-250SALE
C-TTBN640T10-250SALE
C-TTBN650T10-250SALE
C-TTBN660T10-250SALE
C-TTBN680T10-250SALE
C-TTBN690T10-250SALE
C-TTBN700T10-250SALE
C-TTBN710T10-250SALE
C-TTBN720T10-250SALE

Price	Minimum Order Qty.	Volume Discount	Days to ShipSố ngày giao hàng	Belt Type	Belt Width (mm) (mm)	Circumference Length (mm)	Number of Teeth
130,894 VND 111,260 VND	1 Piece(s)	Available	13 Day(s)	T10	25	-	-
156,322 VND 132,874 VND	4 Piece(s)	Available	10 Day(s)	T10	25	1010	101
135,878 VND 115,496 VND	1 Piece(s)	Available	13 Day(s)	T10	25	-	-
162,419 VND 138,056 VND	4 Piece(s)	Available	10 Day(s)	T10	25	1050	105
143,154 VND 121,681 VND	4 Piece(s)	Available	10 Day(s)	T10	25	1080	108
143,468 VND 121,948 VND	1 Piece(s)	Available	13 Day(s)	T10	25	-	-
177,375 VND 150,769 VND	4 Piece(s)	Available	8 Day(s)	T10	25	1110	111
178,928 VND 152,089 VND	4 Piece(s)	Available	8 Day(s)	T10	25	1120	112
182,018 VND 154,715 VND	4 Piece(s)	Available	8 Day(s)	T10	25	1140	114
177,656 VND 151,008 VND	4 Piece(s)	Available	10 Day(s)	T10	25	1150	115
154,589 VND 131,401 VND	4 Piece(s)	Available	10 Day(s)	T10	25	1170	117
185,273 VND 157,482 VND	4 Piece(s)	Available	10 Day(s)	T10	25	1200	120
186,799 VND 158,779 VND	4 Piece(s)	Available	10 Day(s)	T10	25	1210	121
163,736 VND 139,176 VND	4 Piece(s)	Available	10 Day(s)	T10	25	1240	124
199,217 VND 169,334 VND	4 Piece(s)	Available	8 Day(s)	T10	25	1250	125
200,773 VND 170,657 VND	4 Piece(s)	Available	8 Day(s)	T10	25	1260	126
203,859 VND 173,280 VND	4 Piece(s)	Available	8 Day(s)	T10	25	1280	128
200,509 VND 170,433 VND	1 Piece(s)	Available	Same day	T10	25	1300	130
202,034 VND 171,729 VND	4 Piece(s)	Available	10 Day(s)	T10	25	1310	131
203,560 VND 173,026 VND	4 Piece(s)	Available	10 Day(s)	T10	25	1320	132
208,127 VND 176,908 VND	4 Piece(s)	Available	10 Day(s)	T10	25	1350	135
220,931 VND 187,791 VND	1 Piece(s)	Available	Same day	T10	25	1390	139
222,541 VND 189,160 VND	1 Piece(s)	Available	Same day	T10	25	1400	140
225,649 VND 191,802 VND	4 Piece(s)	Available	8 Day(s)	T10	25	1420	142
186,259 VND 158,320 VND	1 Piece(s)	Available	13 Day(s)	T10	25	-	-
187,524 VND 159,395 VND	1 Piece(s)	Available	13 Day(s)	T10	25	-	-
188,790 VND 160,472 VND	1 Piece(s)	Available	13 Day(s)	T10	25	-	-
191,241 VND 162,555 VND	1 Piece(s)	Available	13 Day(s)	T10	25	-	-
245,462 VND 208,643 VND	4 Piece(s)	Available	8 Day(s)	T10	25	1500	150
201,366 VND 171,161 VND	1 Piece(s)	Available	13 Day(s)	T10	25	-	-
203,817 VND 173,244 VND	1 Piece(s)	Available	13 Day(s)	T10	25	-	-
260,998 VND 221,848 VND	1 Piece(s)	Available	Same day	T10	25	1600	160
262,551 VND 223,168 VND	4 Piece(s)	Available	8 Day(s)	T10	25	1610	161
210,145 VND 178,623 VND	1 Piece(s)	Available	13 Day(s)	T10	25	-	-
211,410 VND 179,699 VND	1 Piece(s)	Available	13 Day(s)	T10	25	-	-
218,923 VND 186,085 VND	1 Piece(s)	Available	13 Day(s)	T10	25	-	-
269,076 VND 228,715 VND	4 Piece(s)	Available	10 Day(s)	T10	25	1750	175
229,047 VND 194,690 VND	1 Piece(s)	Available	13 Day(s)	T10	25	-	-
276,697 VND 235,192 VND	4 Piece(s)	Available	10 Day(s)	T10	25	1800	180
239,093 VND 203,229 VND	1 Piece(s)	Available	13 Day(s)	T10	25	-	-
255,487 VND 217,164 VND	4 Piece(s)	Available	12 Day(s)	T10	25	1880	188
266,307 VND 226,361 VND	1 Piece(s)	Available	Same day	T10	25	1960	196
261,785 VND 222,517 VND	1 Piece(s)	Available	13 Day(s)	T10	25	-	-
274,385 VND 233,227 VND	1 Piece(s)	Available	Same day	T10	25	2020	202
276,891 VND 235,357 VND	1 Piece(s)	Available	13 Day(s)	T10	25	-	-
279,344 VND 237,442 VND	1 Piece(s)	Available	13 Day(s)	T10	25	-	-
289,469 VND 246,049 VND	1 Piece(s)	Available	13 Day(s)	T10	25	-	-
295,715 VND 251,358 VND	1 Piece(s)	Available	13 Day(s)	T10	25	-	-
302,044 VND 256,737 VND	1 Piece(s)	Available	13 Day(s)	T10	25	-	-
324,665 VND 275,965 VND	1 Piece(s)	Available	13 Day(s)	T10	25	-	-
327,196 VND 278,117 VND	1 Piece(s)	Available	13 Day(s)	T10	25	-	-
339,770 VND 288,805 VND	1 Piece(s)	Available	13 Day(s)	T10	25	-	-
38,118 VND 32,400 VND	1 Piece(s)	Available	13 Day(s)	T10	25	-	-
364,924 VND 310,185 VND	1 Piece(s)	Available	13 Day(s)	T10	25	-	-
371,251 VND 315,563 VND	1 Piece(s)	Available	13 Day(s)	T10	25	-	-
390,074 VND 331,563 VND	1 Piece(s)	Available	13 Day(s)	T10	25	-	-
44,356 VND 37,703 VND	4 Piece(s)	Available	10 Day(s)	T10	25	320	32
463,216 VND 393,734 VND	4 Piece(s)	Available	8 Day(s)	T10	25	-	-
44,052 VND 37,444 VND	1 Piece(s)	Available	13 Day(s)	T10	25	-	-
45,318 VND 38,520 VND	1 Piece(s)	Available	13 Day(s)	T10	25	-	-
447,971 VND 380,775 VND	1 Piece(s)	Available	13 Day(s)	T10	25	-	-
49,114 VND 41,747 VND	1 Piece(s)	Available	13 Day(s)	T10	25	-	-
52,908 VND 44,972 VND	1 Piece(s)	Available	13 Day(s)	T10	25	-	-
63,377 VND 53,870 VND	4 Piece(s)	Available	10 Day(s)	T10	25	400	40
56,625 VND 48,131 VND	1 Piece(s)	Available	13 Day(s)	T10	25	-	-
57,892 VND 49,208 VND	1 Piece(s)	Available	13 Day(s)	T10	25	-	-
69,474 VND 59,053 VND	1 Piece(s)	Available	Same day	T10	25	440	44
70,995 VND 60,346 VND	1 Piece(s)	Available	Same day	T10	25	450	45
62,952 VND 53,509 VND	1 Piece(s)	Available	13 Day(s)	T10	25	-	-
75,566 VND 64,231 VND	4 Piece(s)	Available	10 Day(s)	T10	25	480	48
78,614 VND 66,822 VND	1 Piece(s)	Available	Same day	T10	25	500	50
84,181 VND 71,554 VND	4 Piece(s)	Available	8 Day(s)	T10	25	510	51
70,467 VND 59,897 VND	1 Piece(s)	Available	13 Day(s)	T10	25	-	-
83,075 VND 70,614 VND	1 Piece(s)	Available	Same day	T10	25	530	53
73,000 VND 62,050 VND	1 Piece(s)	Available	13 Day(s)	T10	25	-	-
74,263 VND 63,124 VND	1 Piece(s)	Available	13 Day(s)	T10	25	-	-
87,756 VND 74,593 VND	1 Piece(s)	Available	Same day	T10	25	560	56
89,282 VND 75,890 VND	1 Piece(s)	Available	Same day	T10	25	570	57
78,058 VND 66,349 VND	1 Piece(s)	Available	13 Day(s)	T10	25	-	-
93,758 VND 79,694 VND	1 Piece(s)	Available	Same day	T10	25	600	60
95,373 VND 81,067 VND	4 Piece(s)	Available	10 Day(s)	T10	25	610	61
98,419 VND 83,656 VND	4 Piece(s)	Available	10 Day(s)	T10	25	630	63
104,376 VND 88,720 VND	1 Piece(s)	Available	Same day	T10	25	640	64
101,471 VND 86,250 VND	4 Piece(s)	Available	10 Day(s)	T10	25	650	65
102,992 VND 87,543 VND	4 Piece(s)	Available	10 Day(s)	T10	25	660	66
110,590 VND 94,002 VND	4 Piece(s)	Available	8 Day(s)	T10	25	680	68
107,563 VND 91,429 VND	4 Piece(s)	Available	10 Day(s)	T10	25	690	69
109,088 VND 92,725 VND	4 Piece(s)	Available	10 Day(s)	T10	25	700	70
94,355 VND 80,202 VND	1 Piece(s)	Available	13 Day(s)	T10	25	-	-
112,136 VND 95,316 VND	1 Piece(s)	Available	Same day	T10	25	720	72

Loading...Tải…

Basic InformationThông tin cơ bản

Belt Shape	Closed End	Belt Tooth Surface	Standard (Single Sided)	Belt Material	Rubber Belt
Core Wire Material	Glass Fiber	Belt Shape Type	Trapezoidal Tooth Profile Metric Type	Transmission Torque	Regular Torque Transmission

The specifications and dimensions of some parts may not be fully covered. For exact details, refer toCác thông số kỹ thuật và kích thước của mã sản phẩm có thể không được bao phủ đầy đủ. Để biết chi tiết chính xác, hãy tham khảo manufacturer catalogsdanh mục nhà sản xuất ..

Frequently asked question (FAQ)FAQ

Question:Question: Why is the order model of the timing belt inconsistent with the actual belt label and engraving?: Answer:Answer: Order model is MISUMI product model, the label on the belt or printed model on the belt surface is the belt manufacturer model, which varies with manufacturer, but there will be no influence on the product itself.
Question:Question: The timing belt has been broken after use for a very short period of time. Is there a problem with the quality of the belt?: Answer:Answer: The timing belt is a standard product, and the same batch of products have very few individual quality problems, please refer to Main causes of premature breakage and corresponding countermeasures to troubleshoot the equipment in use.
Question:Question: Can alteration be made to the timing belt?: Answer:Answer: Alteration cannot be made to the circumference of the timing belt, and partial alteration can be made to the width.
Question:Question: What kind of belt is better to use under conditions that require high cleanliness?: Answer:Answer: The use of urethane belts is recommended, which has significantly improved dust drop, compared to the rubber belt.
Question:Question: What are the two main types of timing belts according to their functions? What is the role?: Answer:Answer: Timing belts are mainly divided into transmission type and driving type. For transmission type, the load can be placed on the timing belt surface for transmission. For driving type, no load is carried, and only the role of transmitting torque is played, which is similar to the role of chain.
Question:Question: How to judge or measure whether the belt tension meets the installation requirements?: Answer:Answer: It is recommended that the customer purchase the tension meter by himself and make a judgment according to the calculation formula of the initial design.
Question:Question: Which tooth type of the timing belt has the smallest clearance? What will it affect?: Answer:Answer: The arc tooth type has minimum clearance, which can improve such indicators as positioning accuracy and rigidity.

Check other FAQ (4 items) HideĐóng.

Top of the page

About MISUMIVề Misumi

About this WebsiteVề trang Web này

Useful ToolsCác công cụ hữu ích

Customer ServiceDịch vụ chăm sóc khách hàng

MISUMI Contact Monday to Saturday: 8:00 am - 5:00 pm Order cut off time is 5:00 pm Thứ 2 đến Thứ 7: 8 giờ sáng đến 5 giờ chiều Hạn chót đặt hàng là 5 giờ chiều

Tel:Số điện thoại:0222-361-1555
Fax:Số Fax:0222-361-2555
InquiryYêu cầu

MISUMI APP

Install MISUMI APP

MISUMI Vietnam Company Limited, Legal Representative: Tomohiro Watanabe,
phone: 0222-361-1555, e-mail: [email protected], Enterprise Code: 0107514576,
Date of Issuance: 22 July 2016, Place of Issuance: Bac Ninh, Business Certificate No. 6573041568-KD dated 27 September 2016 issued by the People's Committee of Bac Ninh

Công ty TNHH MISUMI Việt Nam, Đại diện theo pháp luật: Tomohiro Watanabe,
Điện thoại: 0222-361-1555, e-mail: [email protected], Mã số doanh nghiệp: 0107514576,
ngày cấp 22/7/2016, nơi cấp: Bắc Ninh, Giấy phép kinh doanh số: 6573041568-KD ngày cấp 27/9/2016 bởi UBND tỉnh Bắc Ninh