Why is the order model of the timing belt inconsistent with the actual belt label and engraving?

Order model is MISUMI product model, the label on the belt or printed model on the belt surface is the belt manufacturer model, which varies with manufacturer, but there will be no influence on the product itself.

The timing belt has been broken after use for a very short period of time. Is there a problem with the quality of the belt?

The timing belt is a standard product, and the same batch of products have very few individual quality problems, please refer to Main causes of premature breakage and corresponding countermeasures to troubleshoot the equipment in use.

Can alteration be made to the timing belt?

Alteration cannot be made to the circumference of the timing belt, and partial alteration can be made to the width.

What kind of belt is better to use under conditions that require high cleanliness?

The use of urethane belts is recommended, which has significantly improved dust drop, compared to the rubber belt.

What are the two main types of timing belts according to their functions? What is the role?

Timing belts are mainly divided into transmission type and driving type. For transmission type, the load can be placed on the timing belt surface for transmission. For driving type, no load is carried, and only the role of transmitting torque is played, which is similar to the role of chain.

How to judge or measure whether the belt tension meets the installation requirements?

It is recommended that the customer purchase the tension meter by himself and make a judgment according to the calculation formula of the initial design.

Which tooth type of the timing belt has the smallest clearance? What will it affect?

The arc tooth type has minimum clearance, which can improve such indicators as positioning accuracy and rigidity.

(!) Since support from Microsoft will end on January 14th, 2020, Windows 7 will be excluded from the recommended environment from December 15th, 2019 on this site. Vì lý do Microsoft kết thúc hỗ trợ cho Windows 7 vào ngày 14/01/2020, Windows 7 sẽ là hệ điều hành không được khuyến khích sử dụng với trang web này từ ngày 15/12/2019.

Tel: 0222-361-1555 Email: [email protected] 8:00 - 17:00 (Mon - Sat)

ものづくりの、明日を支える。MISUMI-VONA 生産材コマースものづくりの、明日を支える。MISUMI-VONA 生産材コマース

Webcode Seach | Series: #CODE

Keyword suggestionsTừ khóa gợi ý

Part number suggestionsGợi ý mã sản phẩm

Discontinued Products

Search by Category / Brand Tìm theo danh mục, nhãn hiệu

Search by Category Tìm theo danh mục

[Thông báo] Cập nhật địa chỉ kho tập kết hàng hóa tại khu vực miền Nam của MISUMI Việt Nam. Xem chi tiết.
[Announcement] Update on warehouse address in the Southern region of MISUIMI Vietnam. See more. 
[Cảnh Báo] Thủ Đoạn Lừa Đảo Từ Nhân Viên Giao Hàng – Yêu Cầu Trả Phí Ship. Xem chi tiết.
[Warning] Fraud Calling from Shipper - Asking to Pay Shipping Fee. See more.

How can we improve?

How can we improve?

Comments

Name (Optional)

E-mail Address (Optional)

Tel (Optional)

While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
Customer Privacy Policy

Thank you for your cooperation.

While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
Please use the inquiry form.

Customer Privacy Policy

ConfigureTạo

Part number has not been determine

(638 Part Numbers Available)

Configure Remaining SpecificationsĐịnh cấu hình các thông số còn lại

Part Number CompleteĐã hoàn thành

C-HTBN1330S5M-100

Belt Width (mm) Circumference Length Number of Teeth type CAD Days to Ship

Specification/DimensionsĐặc điểm kỹ thuật / Kích thướcĐặc điểm kỹ thuật / Kích thước

Belt Width (mm)(mm)
10

15

25
ClearTrống
Circumference Length(mm)
180

225

230

250

255

260

270

275

280

285

295

300

305

320

325

330

335

340

350

355

360

370

375

380

390

395

400

410

415

420

425

435

440

445

450

455

465

475

480

490

500

510

515

520

525

530

545

550

555

560

565

570

575

590

595

600

615

625

635

640

645

650

655

660

665

670

675

680

690

695

700

710

720

725

730

740

750

765

770

780

800

810

830

835

845

850

860

865

870

880

890

900

905

930

935

940

950

960

975

1000

1025

1050

1060

1085

1100

1115

1120

1125

1135

1145

1160

1165

1175

1195

1200

1215

1225

1250

1270

1295

1310

1350

1420

1475

1500

1530

1550

1595

1615

1650

1680

1690

1715

1800

1945

1960

2000

2350

2480

2525

2765

2800

2980

3380
ClearTrống
Number of Teeth
36

45

46

50

51

52

54

55

56

57

59

60

61

64

65

66

67

68

70

71

72

74

75

76

78

79

80

82

83

84

85

87

88

89

90

91

93

95

96

98

100

102

103

104

105

106

109

110

111

112

113

114

115

118

119

120

123

125

127

128

129

130

131

132

133

134

135

136

138

139

140

142

144

145

146

148

150

153

154

156

160

162

166

167

169

170

172

173

174

176

178

180

181

186

187

188

190

192

195

200

205

210

212

217

220

223

224

225

227

229

232

233

235

239

240

243

245

250

254

259

262

270

284

295

300

306

310

319

323

330

336

338

343

360

389

392

400

470

496

505

553

560

596

676
ClearTrống
type
- C-HTBN□□S5M
ClearTrống
CADCAD
- 2D
- 3D
ClearTrống

Days to ShipSố ngày giao hàng

Alltất cả các

Same day

5 Day(s) or Less

6 Day(s) or Less

8 Day(s) or Less

10 Day(s) or Less

12 Day(s) or Less

13 Day(s) or Less

14 Day(s) or Less
ClearTrống

Specify AlterationsChỉ định thay đổi

Timing Belts S5M (Part Number)

Until 31/12/2024
Volume Discount

Check FAQ of this product (7 items)

Brand :

MiSUMi Economy

Part Number :

C-HTBN1330S5M-100 SALE

C-HTBN1330S5M-150 SALE

C-HTBN1330S5M-250 SALE

C-HTBN1335S5M-100 SALE

C-HTBN1335S5M-150 SALE

C-HTBN1335S5M-250 SALE

C-HTBN1350S5M-100 SALE

C-HTBN1350S5M-150 SALE

C-HTBN1350S5M-250 SALE

C-HTBN1380S5M-100 SALE

C-HTBN1380S5M-150 SALE

C-HTBN1380S5M-250 SALE

C-HTBN1390S5M-100 SALE

C-HTBN1390S5M-150 SALE

C-HTBN1390S5M-250 SALE

C-HTBN1400S5M-100 SALE

C-HTBN1400S5M-150 SALE

C-HTBN1400S5M-250 SALE

C-HTBN1420S5M-100 SALE

C-HTBN1420S5M-150 SALE

C-HTBN1330S5M-100

Order Qty :
Total Price :

---
Days to ship :

---

Select part number to Order Now/ Add to Cart

CAD Download

(i)
Caution

thận trọng

**RoHS Compliant is available for some part numbers.
Please contact with MISUMI for detail effective date.

Product Description

Timing Belts S5M
It is a circular tooth profile timing belt. This belt always uses for high torque transmission in an automation machine
[Features]
• Belt Shape: Closed End
• Belt Tooth Type: S5M (round tooth profile)
• Tooth Pitch: 5 mm.
• Belt Width: 10, 15 and 20 mm.
• Circumference Length Shortest/Longest: 225 mm. and 3580 mm.
• Belt Operating Temperature Range: -30 to 90℃.
• Material:
Tooth rubber: Chloroprene
Core wire: Glass Fiber
Backing cloth layer: Nylon canvas
[Applications]
Suitable for use with a timing pulley in a transmission system in an automation machine
See more ...

Economy S5M Timing Belt

LongevityPrecise Circular Tooth ProfileTemperature Range

- With a wide range of belt lengths and widths, you can tailor the belt to perfectly match your specific equipment needs.

- Constructed with high-quality chloroprene rubber, these belts excel in resisting abrasion, oil, and grease, ensuring extended service life even in demanding environments.

- The glass fiber reinforced core provides exceptional strength and tensile strength, preventing belt elongation and slippage, resulting in consistent power transmission.

- The accurately designed circular tooth profile guarantees smooth and efficient power transmission, minimizing noise and vibration for optimal performance.

- Engineered to function reliably in temperatures ranging from -30°C to 90°C, these belts offer versatility across various operating conditions.

MISUMI Standard

Cheaper Price

Product Variety

3D CAD
3D CAD Support

Product Overview

Usually, timing pulleys and timing belts are widely used to design mechanisms for transmitting rotational power generated by motors.
Driving and transmission are realized through the engagement between the teeth of timing pulleys and timing belts.

Dimensional Drawing

■Material/Specification Table

Material
① Rear rubber	Chloroprene
② Tooth rubber	Chloroprene
③ Core wire	Glass Fiber
④ Backing cloth	Nylon canvas

Specifications Overview

Types	Tooth pitch	Ra	Lr	H	h	i	PLD	Unit weight g/m (Width: 10mm)
S5M	5	3.25	3.25	3.41	1.91	1.5	0.48	34

Belt circumference length is core wire length.

C-HTBN belt operating temperature range: -30 to 90 ℃.

The model engraved on the back of the product is the manufacturer model.

MISUMI makes no commitment to this product brand.

For the transmission capacity and calculation and design method of economy series timing belt, please refer to the national standard (GB) design manual.

Specification Table

■Specification Table
Economic type Toothed timing belt S2M S3M S5M S8M S14M type Ordering example

■C-HTBN
■Type S5M (Tooth pitch: 5mm)

Part Number		Belt Nominal Width	Number of Teeth	Belt Circumference Length (mm)
Type	Belt Number	Belt Nominal Width	Number of Teeth	Belt Circumference Length (mm)
C-HTBN	150S5M	100 (10mm) 150 (15mm) 250 (25mm)	30	150
	160S5M		32	160
	180S5M		36	180
	185S5M		37	185
	200S5M		40	200
	215S5M		43	215
	220S5M		44	220
	225S5M		45	225
	230S5M		46	230
	235S5M		47	235
	240S5M		48	240
	245S5M		49	245
	250S5M		50	250
	255S5M		51	255
	260S5M		52	260
	265S5M		53	265
	270S5M		54	270
	275S5M		55	275
	280S5M		56	280
	285S5M		57	285
	290S5M		58	290
	295S5M		59	295
	300S5M		60	300
	305S5M		61	305
	310S5M		62	310
	315S5M		63	315
	320S5M		64	320
	325S5M		65	325
	330S5M		66	330
	335S5M		67	335
	340S5M		68	340
	345S5M		69	345
	350S5M		70	350
	355S5M		71	355
	360S5M		72	360
	365S5M		73	365
	370S5M		74	370
	375S5M		75	375
	380S5M		76	380
	385S5M		77	385
	390S5M		78	390
	395S5M		79	395
	400S5M		80	400
	405S5M		81	405
	410S5M		82	410
	415S5M		83	415
	420S5M		84	420
	425S5M		85	425
	430S5M		86	430
	435S5M		87	435
	440S5M		88	440
	445S5M		89	445
	450S5M		90	450
	455S5M		91	455
	460S5M		92	460
	465S5M		93	465
	470S5M		94	470
	475S5M		95	475
	480S5M		96	480
	485S5M		97	485
	490S5M		98	490
	495S5M		99	495
	500S5M		100	500
	505S5M		101	505
510S5M	102	510
515S5M	103	515
520S5M	104	520
525S5M	105	525
530S5M	106	530
535S5M	107	535
540S5M	108	540
545S5M	109	545
550S5M	110	550
555S5M	111	555
560S5M	112	560
565S5M	113	565
570S5M	114	570
575S5M	115	575
580S5M	116	580
585S5M	117	585
590S5M	118	590
595S5M	119	595
600S5M	120	600
610S5M	122	610
615S5M	123	615
620S5M	124	620
625S5M	125	625
630S5M	126	630
635S5M	127	635
640S5M	128	640
645S5M	129	645
650S5M	130	650
655S5M	131	655
660S5M	132	660
665S5M	133	665
670S5M	134	670
675S5M	135	675
680S5M	136	680
685S5M	137	685
690S5M	138	690
695S5M	139	695
700S5M	140	700
710S5M	142	710
720S5M	144	720
725S5M	145	725
730S5M	146	730
735S5M	147	735
740S5M	148	740
745S5M	149	745
750S5M	150	750
755S5M	151	755
760S5M	152	760
765S5M	153	765
770S5M	154	770
775S5M	155	775
780S5M	156	780
785S5M	157	785
790S5M	158	790
800S5M	160	800
810S5M	162	810
815S5M	163	815
820S5M	164	820
825S5M	165	825
830S5M	166	830
835S5M	167	835
840S5M	168	840
845S5M	169	845
850S5M	170	850
860S5M	172	860
865S5M	173	865
870S5M	174	870
880S5M	176	880
890S5M	178	890
900S5M	180	900
905S5M	181	905
915S5M	183	915
920S5M	184	920
925S5M	185	925
930S5M	186	930
935S5M	187	935
940S5M	188	940
950S5M	190	950
960S5M	192	960
970S5M	194	970
975S5M	195	975
980S5M	196	980
1000S5M	200	1000
1010S5M	202	1010
1025S5M	205	1025
1050S5M	210	1050
1060S5M	212	1060
1080S5M	216	1080
1085S5M	217	1085
1100S5M	220	1100
1110S5M	222	1110
1115S5M	223	1115
1120S5M	224	1120
1125S5M	225	1125
1135S5M	227	1135
1145S5M	229	1145
1150S5M	230	1150
1160S5M	232	1160
1165S5M	233	1165
1175S5M	235	1175
1195S5M	239	1195
1200S5M	240	1200
1210S5M	242	1210
1215S5M	243	1215
1225S5M	245	1225
1250S5M	250	1250
1270S5M	254	1270
1295S5M	259	1295
1300S5M	260	1300
1305S5M	261	1305
1310S5M	262	1310
1320S5M	264	1320
1330S5M	266	1330
1335S5M	267	1335
1350S5M	270	1350
1380S5M	276	1380
1390S5M	278	1390
1400S5M	280	1400
1420S5M	284	1420
1450S5M	290	1450
1460S5M	292	1460
1475S5M	295	1475
1500S5M	300	1500
1530S5M	306	1530
1550S5M	310	1550
1595S5M	319	1595
1600S5M	320	1600
1615S5M	323	1615
1650S5M	330	1650
1675S5M	335	1675
1680S5M	336	1680
1685S5M	337	1685
1690S5M	338	1690
1695S5M	339	1695
1700S5M	340	1700
1715S5M	343	1715
1800S5M	360	1800
1945S5M	389	1945
1960S5M	392	1960
2000S5M	400	2000
2100S5M	420	2100
2350S5M	470	2350
2525S5M	505	2525
2765S5M	553	2765
2800S5M	560	2800
2980S5M	596	2980
3090S5M	618	3090

Product Feature

		■ S type circular tooth profile rubber timing belt (S2M/S3M/S5M/S8M/S14M) Feature 1: Reasonable semi-circular arc tooth profile design can provide higher torque to adapt to high load transmission. Feature 2: Reduce the noise generated by high-speed operation. Feature 3: Tooth peak changes under force, ensuring a longer life than conventional circular tooth profile teeth. Feature 4: Have certain conductivity Feature 5: Operating Temperature Range: -30 to 90℃.
		■ P type circular tooth profile rubber timing belt (P5M/P8M) Feature 1: Reasonable semi-circular arc tooth profile design can provide higher torque to adapt to high load transmission. Feature 2: Special concave tooth peak design, better reducing noise generated by high-speed operation. Feature 3: Tooth peak changes under force, ensuring greater accuracy than conventional circular tooth profile teeth. Feature 4: Have certain conductivity Feature 5: Operating Temperature Range: -25 to 80℃.
		■ Trapezoidal tooth profile rubber timing belt (MXL/XL/H/T5/T10) Feature 1: Suitable for light load transmission, standard torque driving. Feature 2: Tooth rubber uses chloroprene to protect core wire, providing excellent bending fatigue resistance, heat resistance, oil resistance Feature 3: Ideal choice of economical and maintenance-free alternative to traditional transmission method. Feature 4: Have certain conductivity Feature 5: Operating Temperature Range: -30 to 90℃ (MXL/XL/H) , 0 to 80℃ (T5/T10)

Example of Use

Usage Method Example Drawing	Instructions for use of timing wheel and timing belt
	① Driving (The driven wheel is driven by the driving wheel for transmission)
	② Transmission (Used for repeated motion with the object not rotating and high requirements on positioning accuracy)

Usage Method Example Drawing	Instructions for use of timing wheel and timing belt
	③ Conveyance (Plates are conveyed by two timing toothed belts)
	④ Traction transmission (Workpieces are clamped and transmitted by the belt)

Usage Method

■ Installation method for timing belt transmission
①	Turn off the power supply, remove the protective cover, loosen the motor assembly bolts, move the motor so that the belt is loose enough. The belt can be removed without prying. Never try to pry the belt down.
②	Remove the old belt and check for abnormal wear. Excessive wear may mean that there are problems in the design or maintenance of the transmission device.
③	Choose the right belt to replace.
④	To clean the belt and pulley, wipe with a cloth dipped in a small amount of non-volatile liquid. Soaking in detergent or scrubbing the belt with detergent is not advisable. To remove grease, it is also undesirable to wipe with sandpaper or scratch with a sharp object. The belt must be kept dry before installation and use.
⑤	Check the pulley for abnormal wear or cracks. If the wear is excessive, the pulley must be replaced.
⑥	Check whether the pulley is linearly symmetrical. Linear symmetry of the pulley is essential for the operation of the timing belt, especially the timing belt transmission device. Asymmetry of the pulley is shown as follows:

⑦	Check the remaining transmission device components, such as bearings and bushings, for symmetry, durability, lubrication and other conditions.
⑧	Install a new belt on the pulley. Never pry or use too much force.
⑨	Tighten to narrow the center distance of the transmission device until the tension tester detects that the belt tension is appropriate. Turn the driving wheel several times with your hands. Re-test tension.
⑩	Tighten the assembly bolts of the motor and correct the torque. Since any change in the center distance of the transmission device during operation will result in poor belt performance, it is important to ensure that all transmission components have been tightened.
⑪	Start the device and observe the belt performance to see if there is abnormal vibration, and listen carefully if there is abnormal noise. It is best to turn off the machine and check the conditions of the bearing and motor. If it feels too hot to the touch, the belt may be too tight, the bearing may be asymmetrical, or the lubrication may be incorrect.

Precautions

① Do not bend the belt by force.
It is strictly forbidden to bend the belt, which easily causes breakage

Do not use in direct contact with water, solvent, oil, acid, alkali, UV, ozone, etc.

③ Please avoid using or keeping at extreme high or low temperatures beyond the operating temperature range, or in humid environments.
④ During installation and maintenance, be sure to cut off the power supply and confirm that the machine is completely stopped before proceeding.
⑤ When there may be impurities, be sure to set the guard.

Application Industries

Food	Semiconductor	Smart phone

Automotive	Electronic & Electrical Appliances	Medical

Part Number

Incomplete part number.
Please use left hand selections to complete a part number.Incomplete part number.
Please use left hand selections to complete a part number.

Loading...Tải…

: 30; 60; 90

Part Number
C-HTBN1330S5M-100SALE
C-HTBN1330S5M-150SALE
C-HTBN1330S5M-250SALE
C-HTBN1335S5M-100SALE
C-HTBN1335S5M-150SALE
C-HTBN1335S5M-250SALE
C-HTBN1350S5M-100SALE
C-HTBN1350S5M-150SALE
C-HTBN1350S5M-250SALE
C-HTBN1380S5M-100SALE
C-HTBN1380S5M-150SALE
C-HTBN1380S5M-250SALE
C-HTBN1390S5M-100SALE
C-HTBN1390S5M-150SALE
C-HTBN1390S5M-250SALE
C-HTBN1400S5M-100SALE
C-HTBN1400S5M-150SALE
C-HTBN1400S5M-250SALE
C-HTBN1420S5M-100SALE
C-HTBN1420S5M-150SALE
C-HTBN1420S5M-250SALE
C-HTBN1450S5M-100SALE
C-HTBN1450S5M-150SALE
C-HTBN1450S5M-250SALE
C-HTBN1460S5M-100SALE
C-HTBN1460S5M-150SALE
C-HTBN1460S5M-250SALE
C-HTBN1475S5M-100SALE
C-HTBN1475S5M-150SALE
C-HTBN1475S5M-250SALE
C-HTBN1500S5M-100SALE
C-HTBN1500S5M-150SALE
C-HTBN1500S5M-250SALE
C-HTBN150S5M-100SALE
C-HTBN150S5M-150SALE
C-HTBN150S5M-250SALE
C-HTBN1530S5M-100SALE
C-HTBN1530S5M-150SALE
C-HTBN1530S5M-250SALE
C-HTBN1550S5M-100SALE
C-HTBN1550S5M-150SALE
C-HTBN1550S5M-250SALE
C-HTBN1595S5M-100SALE
C-HTBN1595S5M-150SALE
C-HTBN1595S5M-250SALE
C-HTBN1600S5M-100SALE
C-HTBN1600S5M-150SALE
C-HTBN1600S5M-250SALE
C-HTBN160S5M-100SALE
C-HTBN160S5M-150SALE
C-HTBN160S5M-250SALE
C-HTBN1615S5M-100SALE
C-HTBN1615S5M-150SALE
C-HTBN1615S5M-250SALE
C-HTBN1650S5M-100SALE
C-HTBN1650S5M-150SALE
C-HTBN1650S5M-250SALE
C-HTBN1675S5M-100SALE
C-HTBN1675S5M-150SALE
C-HTBN1675S5M-250SALE
C-HTBN1680S5M-100SALE
C-HTBN1680S5M-150SALE
C-HTBN1680S5M-250SALE
C-HTBN1685S5M-100SALE
C-HTBN1685S5M-150SALE
C-HTBN1685S5M-250SALE
C-HTBN1690S5M-100SALE
C-HTBN1690S5M-150SALE
C-HTBN1690S5M-250SALE
C-HTBN1695S5M-100SALE
C-HTBN1695S5M-150SALE
C-HTBN1695S5M-250SALE
C-HTBN1700S5M-100SALE
C-HTBN1700S5M-150SALE
C-HTBN1700S5M-250SALE
C-HTBN1715S5M-100SALE
C-HTBN1715S5M-150SALE
C-HTBN1715S5M-250SALE
C-HTBN1800S5M-100SALE
C-HTBN1800S5M-150SALE
C-HTBN1800S5M-250SALE
C-HTBN180S5M-100SALE
C-HTBN180S5M-150SALE
C-HTBN180S5M-250SALE
C-HTBN185S5M-100SALE
C-HTBN185S5M-150SALE
C-HTBN185S5M-250SALE
C-HTBN1945S5M-100SALE
C-HTBN1945S5M-150SALE
C-HTBN1945S5M-250SALE

Price	Minimum Order Qty.	Volume Discount	Days to ShipSố ngày giao hàng	Belt Width (mm) (mm)	Circumference Length (mm)	Number of Teeth
86,815 VND 73,793 VND	1 Piece(s)	Available	13 Day(s)	10	-	-
127,696 VND 108,542 VND	1 Piece(s)	Available	13 Day(s)	15	-	-
209,453 VND 178,035 VND	1 Piece(s)	Available	13 Day(s)	25	-	-
87,131 VND 74,061 VND	1 Piece(s)	Available	13 Day(s)	10	-	-
128,169 VND 108,944 VND	1 Piece(s)	Available	13 Day(s)	15	-	-
210,244 VND 178,707 VND	1 Piece(s)	Available	13 Day(s)	25	-	-
91,174 VND 77,498 VND	1 Piece(s)	Available	Same day	10	1350	270
135,510 VND 115,184 VND	1 Piece(s)	Available	Same day	15	1350	270
224,253 VND 190,615 VND	1 Piece(s)	Available	Same day	25	1350	270
89,898 VND 76,413 VND	1 Piece(s)	Available	13 Day(s)	10	-	-
132,358 VND 112,504 VND	1 Piece(s)	Available	13 Day(s)	15	-	-
217,202 VND 184,622 VND	1 Piece(s)	Available	13 Day(s)	25	-	-
90,531 VND 76,951 VND	1 Piece(s)	Available	13 Day(s)	10	-	-
133,230 VND 113,246 VND	1 Piece(s)	Available	13 Day(s)	15	-	-
218,705 VND 185,899 VND	1 Piece(s)	Available	13 Day(s)	25	-	-
91,164 VND 77,489 VND	1 Piece(s)	Available	13 Day(s)	10	-	-
134,179 VND 114,052 VND	1 Piece(s)	Available	13 Day(s)	15	-	-
220,205 VND 187,174 VND	1 Piece(s)	Available	13 Day(s)	25	-	-
95,735 VND 81,375 VND	1 Piece(s)	Available	Same day	10	1420	284
142,427 VND 121,063 VND	1 Piece(s)	Available	Same day	15	1420	284
235,813 VND 200,441 VND	1 Piece(s)	Available	Same day	25	1420	284
94,169 VND 80,044 VND	1 Piece(s)	Available	13 Day(s)	10	-	-
138,763 VND 117,949 VND	1 Piece(s)	Available	13 Day(s)	15	-	-
227,955 VND 193,762 VND	1 Piece(s)	Available	13 Day(s)	25	-	-
94,801 VND 80,581 VND	1 Piece(s)	Available	13 Day(s)	10	-	-
139,713 VND 118,756 VND	1 Piece(s)	Available	13 Day(s)	15	-	-
229,458 VND 195,039 VND	1 Piece(s)	Available	13 Day(s)	25	-	-
112,636 VND 95,741 VND	4 Piece(s)	Available	14 Day(s)	10	1475	295
166,499 VND 141,524 VND	1 Piece(s)	Available	Same day	15	1475	295
281,592 VND 239,353 VND	4 Piece(s)	Available	14 Day(s)	25	1475	295
114,419 VND 97,256 VND	4 Piece(s)	Available	14 Day(s)	10	1500	300
169,138 VND 143,767 VND	1 Piece(s)	Available	Same day	15	1500	300
285,934 VND 243,044 VND	1 Piece(s)	Available	Same day	25	1500	300
20,015 VND 17,013 VND	1 Piece(s)	Available	13 Day(s)	10	-	-
20,018 VND 17,015 VND	1 Piece(s)	Available	13 Day(s)	15	-	-
38,102 VND 32,387 VND	1 Piece(s)	Available	13 Day(s)	25	-	-
116,514 VND 99,037 VND	1 Piece(s)	Available	Same day	10	1530	306
172,236 VND 146,401 VND	1 Piece(s)	Available	Same day	15	1530	306
291,206 VND 247,525 VND	1 Piece(s)	Available	Same day	25	1530	306
115,819 VND 98,446 VND	4 Piece(s)	Available	13 Day(s)	10	1550	310
171,216 VND 145,534 VND	4 Piece(s)	Available	13 Day(s)	15	1550	310
289,469 VND 246,049 VND	4 Piece(s)	Available	13 Day(s)	25	1550	310
107,295 VND 91,201 VND	1 Piece(s)	Available	Same day	10	1595	319
159,690 VND 135,737 VND	1 Piece(s)	Available	Same day	15	1595	319
264,558 VND 224,874 VND	1 Piece(s)	Available	Same day	25	1595	319
103,420 VND 87,907 VND	1 Piece(s)	Available	13 Day(s)	10	-	-
152,600 VND 129,710 VND	1 Piece(s)	Available	13 Day(s)	15	-	-
258,550 VND 219,768 VND	1 Piece(s)	Available	13 Day(s)	25	-	-
20,016 VND 17,014 VND	1 Piece(s)	Available	13 Day(s)	10	-	-
20,018 VND 17,015 VND	1 Piece(s)	Available	13 Day(s)	15	-	-
38,103 VND 32,388 VND	1 Piece(s)	Available	13 Day(s)	25	-	-
120,231 VND 102,196 VND	4 Piece(s)	Available	13 Day(s)	10	1615	323
177,913 VND 151,226 VND	4 Piece(s)	Available	13 Day(s)	15	1615	323
300,578 VND 255,491 VND	4 Piece(s)	Available	13 Day(s)	25	1615	323
107,225 VND 91,141 VND	1 Piece(s)	Available	Same day	10	1650	330
159,622 VND 135,679 VND	4 Piece(s)	Available	14 Day(s)	15	1650	330
264,342 VND 224,691 VND	1 Piece(s)	Available	Same day	25	1650	330
108,006 VND 91,805 VND	1 Piece(s)	Available	13 Day(s)	10	-	-
159,559 VND 135,625 VND	1 Piece(s)	Available	13 Day(s)	15	-	-
270,095 VND 229,581 VND	1 Piece(s)	Available	13 Day(s)	25	-	-
126,980 VND 107,933 VND	1 Piece(s)	Available	Same day	10	1680	336
187,977 VND 159,780 VND	1 Piece(s)	Available	Same day	15	1680	336
317,335 VND 269,735 VND	1 Piece(s)	Available	Same day	25	1680	336
108,639 VND 92,343 VND	1 Piece(s)	Available	13 Day(s)	10	-	-
160,431 VND 136,366 VND	1 Piece(s)	Available	13 Day(s)	15	-	-
271,597 VND 230,857 VND	1 Piece(s)	Available	13 Day(s)	25	-	-
125,406 VND 106,595 VND	4 Piece(s)	Available	13 Day(s)	10	1690	338
185,599 VND 157,759 VND	4 Piece(s)	Available	13 Day(s)	15	1690	338
313,439 VND 266,423 VND	4 Piece(s)	Available	13 Day(s)	25	1690	338
109,272 VND 92,881 VND	1 Piece(s)	Available	13 Day(s)	10	-	-
161,379 VND 137,172 VND	1 Piece(s)	Available	13 Day(s)	15	-	-
273,178 VND 232,201 VND	1 Piece(s)	Available	13 Day(s)	25	-	-
109,586 VND 93,148 VND	1 Piece(s)	Available	13 Day(s)	10	-	-
161,853 VND 137,575 VND	1 Piece(s)	Available	13 Day(s)	15	-	-
273,969 VND 232,874 VND	1 Piece(s)	Available	13 Day(s)	25	-	-
134,576 VND 114,390 VND	4 Piece(s)	Available	8 Day(s)	10	1715	343
199,447 VND 169,530 VND	1 Piece(s)	Available	Same day	15	1715	343
336,482 VND 286,010 VND	1 Piece(s)	Available	Same day	25	1715	343
184,067 VND 156,457 VND	1 Piece(s)	Available	Same day	10	1800	360
274,965 VND 233,720 VND	1 Piece(s)	Available	Same day	15	1800	360
456,602 VND 388,112 VND	1 Piece(s)	Available	Same day	25	1800	360
17,364 VND 14,759 VND	4 Piece(s)	Available	13 Day(s)	10	180	36
28,074 VND 23,863 VND	1 Piece(s)	Available	Same day	15	180	36
45,120 VND 38,352 VND	4 Piece(s)	Available	13 Day(s)	25	180	36
20,016 VND 17,014 VND	1 Piece(s)	Available	13 Day(s)	10	-	-
20,019 VND 17,016 VND	1 Piece(s)	Available	13 Day(s)	15	-	-
38,105 VND 32,389 VND	1 Piece(s)	Available	13 Day(s)	25	-	-
142,833 VND 121,408 VND	1 Piece(s)	Available	Same day	10	1945	389
211,854 VND 180,076 VND	4 Piece(s)	Available	13 Day(s)	15	1945	389
357,120 VND 303,552 VND	4 Piece(s)	Available	13 Day(s)	25	1945	389

Loading...Tải…

Basic InformationThông tin cơ bản

Belt Shape	Closed End	Belt Tooth Surface	Standard (Single Sided)	Belt Material	Rubber Belt
Core Wire Material	Glass Fiber	Belt Type	S5M	Belt Shape Type	Round Tooth Profile Super Torque
Transmission Torque	High Torque Transmission

The specifications and dimensions of some parts may not be fully covered. For exact details, refer toCác thông số kỹ thuật và kích thước của mã sản phẩm có thể không được bao phủ đầy đủ. Để biết chi tiết chính xác, hãy tham khảo manufacturer catalogsdanh mục nhà sản xuất ..

Frequently asked question (FAQ)FAQ

Question:Question: Why is the order model of the timing belt inconsistent with the actual belt label and engraving?: Answer:Answer: Order model is MISUMI product model, the label on the belt or printed model on the belt surface is the belt manufacturer model, which varies with manufacturer, but there will be no influence on the product itself.
Question:Question: The timing belt has been broken after use for a very short period of time. Is there a problem with the quality of the belt?: Answer:Answer: The timing belt is a standard product, and the same batch of products have very few individual quality problems, please refer to Main causes of premature breakage and corresponding countermeasures to troubleshoot the equipment in use.
Question:Question: Can alteration be made to the timing belt?: Answer:Answer: Alteration cannot be made to the circumference of the timing belt, and partial alteration can be made to the width.
Question:Question: What kind of belt is better to use under conditions that require high cleanliness?: Answer:Answer: The use of urethane belts is recommended, which has significantly improved dust drop, compared to the rubber belt.
Question:Question: What are the two main types of timing belts according to their functions? What is the role?: Answer:Answer: Timing belts are mainly divided into transmission type and driving type. For transmission type, the load can be placed on the timing belt surface for transmission. For driving type, no load is carried, and only the role of transmitting torque is played, which is similar to the role of chain.
Question:Question: How to judge or measure whether the belt tension meets the installation requirements?: Answer:Answer: It is recommended that the customer purchase the tension meter by himself and make a judgment according to the calculation formula of the initial design.
Question:Question: Which tooth type of the timing belt has the smallest clearance? What will it affect?: Answer:Answer: The arc tooth type has minimum clearance, which can improve such indicators as positioning accuracy and rigidity.

Check other FAQ (4 items) HideĐóng.

Top of the page

About MISUMIVề Misumi

About this WebsiteVề trang Web này

Useful ToolsCác công cụ hữu ích

Customer ServiceDịch vụ chăm sóc khách hàng

MISUMI Contact Monday to Saturday: 8:00 am - 5:00 pm Order cut off time is 5:00 pm Thứ 2 đến Thứ 7: 8 giờ sáng đến 5 giờ chiều Hạn chót đặt hàng là 5 giờ chiều

Tel:Số điện thoại:0222-361-1555
Fax:Số Fax:0222-361-2555
InquiryYêu cầu

MISUMI APP

Install MISUMI APP

MISUMI Vietnam Company Limited, Legal Representative: Tomohiro Watanabe,
phone: 0222-361-1555, e-mail: [email protected], Enterprise Code: 0107514576,
Date of Issuance: 22 July 2016, Place of Issuance: Bac Ninh, Business Certificate No. 6573041568-KD dated 27 September 2016 issued by the People's Committee of Bac Ninh

Công ty TNHH MISUMI Việt Nam, Đại diện theo pháp luật: Tomohiro Watanabe,
Điện thoại: 0222-361-1555, e-mail: [email protected], Mã số doanh nghiệp: 0107514576,
ngày cấp 22/7/2016, nơi cấp: Bắc Ninh, Giấy phép kinh doanh số: 6573041568-KD ngày cấp 27/9/2016 bởi UBND tỉnh Bắc Ninh

High Torque Timing Pulleys S2M Type	Flat Belt	(Economy Series) Toothed Timing Belt MXL XL L H Type

Typical model: HTPA48S2M040-B-N10	Typical model: HBLT350-4.23	Typical model: C-TBN236MXL025