(!) Since support from Microsoft will end on January 14th, 2020, Windows 7 will be excluded from the recommended environment from December 15th, 2019 on this site. Vì lý do Microsoft kết thúc hỗ trợ cho Windows 7 vào ngày 14/01/2020, Windows 7 sẽ là hệ điều hành không được khuyến khích sử dụng với trang web này từ ngày 15/12/2019.

Tel. Tel: 0222-361-1555 Email: [email protected] 8:00 - 17:00 (Mon - Sat)
Webcode Seach | Series
#CODE
Keyword suggestionsTừ khóa gợi ý
Part number suggestionsGợi ý mã sản phẩm
Discontinued Products

Search by Category / Brand Tìm theo danh mục, nhãn hiệu

Search by Category Tìm theo danh mục

  • Viewed
    Products     Sản phẩm
    đã xem     최근 본
    상품     查看产品 查看產品
  • My
    Components     Linh kiện
    của tôi     나의 부품 我的部件 我的部件
  • Cart
Recently Viewed Products
X
My Components
X
Cart item(s)
X
Loading...
  • [Thông báo] Cập nhật địa chỉ kho tập kết hàng hóa tại khu vực miền Nam của MISUMI Việt Nam. Xem chi tiết.
    [Announcement] Update on warehouse address in the Southern region of MISUIMI Vietnam. See more. 
  • [Cảnh Báo] Thủ Đoạn Lừa Đảo Từ Nhân Viên Giao Hàng – Yêu Cầu Trả Phí Ship. Xem chi tiết.
    [Warning] Fraud Calling from Shipper - Asking to Pay Shipping Fee. See more.

  • How can we improve?

    How can we improve?

    Comments
    Name (Optional)
    E-mail Address (Optional)
    Tel (Optional)

    While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
    Customer Privacy Policy

    Thank you for your cooperation.

    While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
    Please use the inquiry form.

    Customer Privacy Policy

ConfigureTạo

Clear AllQuet sạch tât cả

Part number has not been determine

(669 Part Numbers Available)
Configure Remaining SpecificationsĐịnh cấu hình các thông số còn lại

Part Number CompleteĐã hoàn thành

C-TBN1300H150
loading

Specification/DimensionsĐặc điểm kỹ thuật / Kích thướcĐặc điểm kỹ thuật / Kích thước

  • Belt Width (mm)(mm)

    • 19.1
    • 25.4
    • 38.1
    • 50.8

    ClearTrống

  • Belt Norminal Width (Inch)(Inch)

    • 0.75
    • 1
    • 1.5
    • 2

    ClearTrống

  • Circumference Length(mm)

    • 304.8
    • 368.3
    • 431.8
    • 469.9
    • 508
    • 533.4
    • 558.8
    • 571.5
    • 584.2
    • 596.9
    • 609.6
    • 622.3
    • 635
    • 647.7
    • 660.4
    • 685.8
    • 698.5
    • 711.2
    • 723.9
    • 736.6
    • 762
    • 787.4
    • 800.1
    • 812.8
    • 825.5
    • 838.2
    • 850.9
    • 863.6
    • 876.3
    • 889
    • 901.7
    • 914.4
    • 927.1
    • 939.8
    • 952.5
    • 965.2
    • 977.9
    • 990.6
    • 1003.30
    • 1016
    • 1028.7
    • 1041.4
    • 1054.1
    • 1066.8
    • 1079.5
    • 1092.2
    • 1104.9
    • 1117.6
    • 1130.3
    • 1143
    • 1168.4
    • 1181.1
    • 1193.8
    • 1206.5
    • 1219.2
    • 1231.9
    • 1244.6
    • 1257.30
    • 1270
    • 1295.4
    • 1308.1
    • 1320.80
    • 1333.5
    • 1346.2
    • 1371.6
    • 1384.3
    • 1397.00
    • 1422.4
    • 1435.10
    • 1447.8
    • 1473.2
    • 1485.9
    • 1498.6
    • 1524
    • 1536.7
    • 1549.40
    • 1562.1
    • 1574.8
    • 1587.5
    • 1600.2
    • 1625.6
    • 1638.3
    • 1651
    • 1663.7
    • 1676.4
    • 1701.8
    • 1727.2
    • 1752.6
    • 1778
    • 1803.40
    • 1828.8
    • 1841.5
    • 1854.2
    • 1879.6
    • 1905
    • 1930.4
    • 1955.8
    • 1981.2
    • 2006.6
    • 2032
    • 2057.4
    • 2082.8
    • 2108.2
    • 2133.6
    • 2159
    • 2184.4
    • 2209.8
    • 2235.2
    • 2260.6
    • 2286
    • 2311.4
    • 2336.8
    • 2362.2
    • 2387.6
    • 2413
    • 2438.4
    • 2489.20
    • 2501.9
    • 2540
    • 2590.8
    • 2603.5
    • 2667.00
    • 2743.2
    • 2794
    • 2844.8
    • 2870.2
    • 2882.9
    • 2895.60
    • 2921.00
    • 2946.4
    • 2997.2
    • 3048
    • 3149.6
    • 3175
    • 3200.40
    • 3225.8
    • 3302
    • 3365.5
    • 3429
    • 3556
    • 3657.60
    • 3683
    • 3810
    • 3835.40
    • 3860.8
    • 3937
    • 3962.4
    • 4064
    • 4191
    • 4267.2
    • 4318
    • 4445
    • 4572
    • 4699.00
    • 4826
    • 5334.0

    ClearTrống

  • Number of Teeth

    • 24
    • 29
    • 34
    • 37
    • 40
    • 42
    • 44
    • 45
    • 46
    • 47
    • 48
    • 49
    • 50
    • 51
    • 52
    • 54
    • 55
    • 56
    • 57
    • 58
    • 60
    • 62
    • 63
    • 64
    • 65
    • 66
    • 67
    • 68
    • 69
    • 70
    • 71
    • 72
    • 73
    • 74
    • 75
    • 76
    • 77
    • 78
    • 79
    • 80
    • 81
    • 82
    • 83
    • 84
    • 85
    • 86
    • 87
    • 88
    • 89
    • 90
    • 92
    • 93
    • 94
    • 95
    • 96
    • 97
    • 98
    • 99
    • 100
    • 102
    • 103
    • 104
    • 105
    • 106
    • 108
    • 109
    • 110
    • 112
    • 113
    • 114
    • 116
    • 117
    • 118
    • 120
    • 121
    • 122
    • 123
    • 124
    • 125
    • 126
    • 128
    • 129
    • 130
    • 131
    • 132
    • 134
    • 136
    • 138
    • 140
    • 142
    • 144
    • 145
    • 146
    • 148
    • 150
    • 152
    • 154
    • 156
    • 158
    • 160
    • 162
    • 164
    • 166
    • 168
    • 170
    • 172
    • 174
    • 176
    • 178
    • 180
    • 182
    • 184
    • 186
    • 188
    • 190
    • 192
    • 196
    • 197
    • 200
    • 204
    • 205
    • 210
    • 216
    • 220
    • 224
    • 226
    • 227
    • 228
    • 230
    • 232
    • 236
    • 240
    • 248
    • 250
    • 252
    • 254
    • 260
    • 265
    • 270
    • 280
    • 288
    • 290
    • 300
    • 302
    • 304
    • 310
    • 312
    • 320
    • 330
    • 336
    • 340
    • 350
    • 360
    • 370
    • 380
    • 420

    ClearTrống

  • type

    • C-TBN□□□H

    ClearTrống

  • CADCAD

    • 2D
    • 3D

    ClearTrống

Days to ShipSố ngày giao hàng

    • Alltất cả các
    • Same day
    • 8 Day(s) or Less
    • 9 Day(s) or Less
    • 13 Day(s) or Less

    ClearTrống

Specify AlterationsChỉ định thay đổi

Timing Belts H (Part Number)

Timing Belts H
  • Sale
  • Until 31/12/2024
  • Volume Discount
Check FAQ of this product (7 items)
You can add up to 6 items per a category to the compare list.

Brand :

MISUMI

MiSUMi Economy

MISUMI

Filter By :
  • All
  • Sale Items
Part Number :
669 Part Numbers Available

C-TBN1300H150 SALE

C-TBN1300H200 SALE

C-TBN1325H075 SALE

C-TBN1325H100 SALE

C-TBN1325H150 SALE

C-TBN1325H200 SALE

C-TBN1350H075 SALE

C-TBN1350H100 SALE

C-TBN1350H150 SALE

C-TBN1350H200 SALE

C-TBN1360H075 SALE

C-TBN1360H100 SALE

C-TBN1360H150 SALE

C-TBN1360H200 SALE

C-TBN1400H075 SALE

C-TBN1400H100 SALE

C-TBN1400H150 SALE

C-TBN1400H200 SALE

C-TBN1440H075 SALE

C-TBN1440H100 SALE

C-TBN1300H150
C-TBN1300H150

Copy Part Number URL to Clipboard

The part number URL has been copied into your clipboard.

Close

loading
    • From :
      20,021VND/Unit
  • Order Qty :
  • Total Price :
    ---
  • Days to ship :
    ---

Select part number to Order Now/ Add to Cart

(i)

Caution

thận trọng

  • **RoHS Compliant is available for some part numbers.
    Please contact with MISUMI for detail effective date.

CAD Download
My Components
My Components
Similar ProductsSimilar Products
Product DetailProduct Detail

Product Description

RoHS Compliant Product



Economy H-Type Timing Belt

Quiet OperationCustomizableChloroprene Material

- With a wide range of belt lengths and widths, you can tailor the belt to perfectly match your specific equipment needs.

- Constructed with high-quality chloroprene rubber, these belts excel in resisting abrasion, oil, and grease, ensuring extended service life even in demanding environments.

- The glass fiber reinforced core provides exceptional strength and tensile strength, preventing belt elongation and slippage, resulting in consistent power transmission.

- The accurately designed trapezoidal tooth profile guarantees smooth and efficient power transmission, minimizing noise and vibration for optimal performance.

- Engineered to function reliably in temperatures ranging from -30°C to 90°C, these belts offer versatility across various operating conditions.

Economy H-Type Timing Belt
MISUMI Economy Logo

MISUMI Standard
MISUMI Standard

Cheaper Price
Cheaper Price

Product Variety
Product Variety

3D CAD
3D CAD Support


Product Overview

Usually, timing pulleys and timing belt are widely used to design mechanisms for transmitting rotational power generated by motors.
Driving and transmission are realized through the engagement between the teeth of timing pulleys and timing belts.
Local production in China delivers MISUMI quality at low price.

Dimensional Drawing

MISUMI Complete specifications Factory direct sales Original quality

■ Material/Specification Table
timing belt Material
① Tooth surface protection layerNylon canvas
② Tooth rubberChloroprene
③ Core wireGlass Fiber
Specifications Overview
TypesTooth pitch2θLrhHRrRaUnit weight
g/m (Width: 10mm)
H12.740°6.122.294.31140
timing beltPlease note that the meaning of the timing belt number of toothed timing belt varies with type.
 The belt circumference length of H (inch size) is the belt number.
timing beltTiming belt circumference length is core wire length.
timing beltC-TBN timing belt operating temperature range: -30 to 90 ℃.
timing beltThe model engraved on the back of the product is the manufacturer model.
timing beltMISUMI makes no commitment to this product brand.
timing beltFor the transmission capacity and calculation and design method of economy series timing belt, please refer to the national standard (GB) design manual.
 
Specification Table
■ Specification Table
Please order after selecting part number and parameters according to the selection steps to .
Ordering Example Part Number (TypeBelt Number Nominal Belt Width)
 C-TBN515H075

■ C-TBN
Tooth profile H (Pitch: 12.7mm)
Part NumberBelt
Nominal Width		Number of TeethBelt Circumference Length
(mm)
TypeBelt Number
C-TBN60H75
(19.1mm)

100
(25.4mm)

150
(38.1mm)

200
(50.8mm)		12152.40
120H24304.80
145H29368.30
170H34431.80
185H37469.90
200H40508.00
205H41520.70
210H42533.40
220H44558.80
225H45571.50
230H46584.20
235H47596.90
240H48609.60
245H49622.30
250H50635.00
255H51647.70
260H52660.40
270H54685.80
275H55698.50
280H56711.20
285H57723.90
290H58736.60
300H60762.00
305H61774.70
310H62787.40
315H63800.10
320H64812.80
325H65825.50
330H66838.20
335H67850.90
340H68863.60
345H69876.30
350H70889.00
355H71901.70
360H72914.40
365H73927.10
370H74939.80
375H75952.50
380H76965.20
385H77977.90
390H78990.60
395H791003.30
400H801016.00
405H811028.70
410H821041.40
415H831054.10
420H841066.80
425H851079.50
430H861092.20
435H871104.90
440H881117.60
445H891130.30
450H901143.00
460H921168.40
465H931181.10
470H941193.80
475H951206.50
480H961219.20
485H971231.90
490H981244.60
495H991257.30
500H1001270.00
510H1021295.40
515H1031308.10
520H1041320.80
525H1051333.50
530H1061346.20
540H1081371.60
545H1091384.30
550H1101397.00
555H1111409.70
560H1121422.40
565H1131435.10
570H1141447.80
580H1161473.20
585H1171485.90
590H1181498.60
600H1201524.00
605H1211536.70
610H1221549.40
615H1231562.10
620H1241574.80
625H1251587.50
630H1261600.20
640H1281625.60
645H1291638.30
650H1301651.00
660H1321676.40
670H1341701.80
680H1361727.20
690H1381752.60
700H1401778.00
710H1421803.40
720H1441828.80
725H1451841.50
730H1461854.20
740H1481879.60
750H1501905.00
760H1521930.40
770H1541955.80
780H1561981.20
785H1571993.90
790H1582006.60
800H1602032.00
810H1622057.40
820H1642082.80
830H1662108.20
840H1682133.60
850H1702159.00
860H1722184.40
870H1742209.80
880H1762235.20
900H1802286.00
910H1822311.40
920H1842336.80
930H1862362.20
940H1882387.60
950H1902413.00
960H1922438.40
980H1962489.20
985H1972501.90
1000H2002540.00
1020H2042590.80
1050H2102667.00
1070H2142717.80
1080H2162743.20
1100H2202794.00
1120H2242844.80
1130H2262870.20
1135H2272882.90
1140H2282895.60
1150H2302921.00
1160H2322946.40
1180H2362997.20
1200H2403048.00
1240H2483149.60
1250H2503175.00
1260H2523200.40
1270H2543225.80
1285H2573263.90
1300H2603302.00
1325H2653365.50
1350H2703429.00
1360H2723454.40
1400H2803556.00
1440H2883657.60
1450H2903683.00
1460H2923708.40
1500H3003810.00
1510H3023835.40
1550H3103937.00
1560H3123962.40
1600H3204064.00
1630H3264140.20
1650H3304191.00
1680H3364267.20
1700H3404318.00
1750H3504445.00
1780H3564521.20
1800H3604572.00
1850H3704699.00
1900H3804826.00
1950H3904953.00
2100H4205334.00

Product Features

S type circular tooth profile economy series timing belt is made of rubber, featuring deviation prevention and wear resistance■ S type circular tooth profile rubber timing belt (S2M/S3M/S5M/S8M/S14M)
Feature 1: Reasonable semi-circular arc tooth profile design can provide higher torque to adapt to high load transmission.
Feature 2: timing belt Reduce the noise generated by high-speed operation.
Feature 3: Tooth peak changes under force, ensuring a longer life than conventional circular tooth profile teeth.
Feature 4: Have certain conductivity
Feature 5: Operating Temperature Range: -30 to 90℃.
Features of P type domestic high-accuracy circular tooth profile timing belt■ P type circular tooth profile rubber timing belt (P5M/P8M)
Feature 1: Reasonable semi-circular arc tooth profile design can provide higher torque to adapt to high load transmission.
Feature 2: Special concave tooth peak design, better reducing noise generated by high-speed operation.
Feature 3: Tooth peak changes under force, ensuring greater accuracy than conventional circular tooth profile teeth.
Feature 4: Have certain conductivity
Feature 5: timing belt Operating Temperature Range: -25 to 80℃.
MXL, XL, L, H trapezoidal tooth profile timing belts are suitable for light load transmission and driving■ Trapezoidal tooth profile rubber timing belt (MXL/XL/H/T5/T10)
Feature 1: Suitable for light load transmission, standard torque driving.
Feature 2: Tooth rubber uses chloroprene to protect core wire, providing excellent bending fatigue resistance, heat resistance, oil resistance
Feature 3: Ideal choice of economical and maintenance-free alternative to traditional transmission method.
Feature 4: Have certain conductivity
Feature 5: timing belt Operating Temperature Range: -30 to 90℃ (MXL/XL/L/H), 0 to 80℃ (T5/T10)

Example of Use

Usage Method Example DrawingInstructions for use of timing wheel and timing belt
The TIMING BELT is installed on the motor and the rotating shaft to transmit the rotational force① Driving (The driven wheel is driven by the driving wheel for transmission)
Transmission belt, used for repeated motion with the object not rotating and high requirements on positioning accuracy② Transmission (Used for repeated motion with the object not rotating and high requirements on positioning accuracy)
Usage Method Example DrawingInstructions for use of timing wheel and timing belt
Plates are conveyed by two timing toothed belts③ Conveyance (Plates are conveyed by two timing toothed belts)
Usage method and example for conveyor belt lifting, repeated positioning motion④ Traction transmission (Workpieces are clamped and transmitted by the belt)

Usage Method

■ Installation method for timing belt transmission
①Turn off the power supply, remove the protective cover, loosen the motor assembly bolts, move the motor so that the belt is loose enough. The timing belt can be removed without prying. Never try to pry the belt down.
②Remove the old belt and check for abnormal wear. Excessive wear may mean that there are problems in the design or maintenance of the transmission device.
③Choose the right timing belt to replace.
④To clean the timing belt and pulley, wipe with a cloth dipped in a small amount of non-volatile liquid. Soaking in detergent or scrubbing the belt with detergent is not advisable. To remove grease, it is also undesirable to wipe with sandpaper or scratch with a sharp object. The belt must be kept dry before installation and use.
⑤Check the pulley for abnormal wear or cracks. If the wear is excessive, the pulley must be replaced.
⑥Check whether the pulley is linearly symmetrical. Linear symmetry of the pulley is essential for the operation of the timing belt, especially the timing belt transmission device.
Asymmetry of the pulley is shown as follows:
 Usage method Installation guide Complete selection Fit installation
⑦Check the remaining transmission device components, such as bearings and bushings, for symmetry, durability, lubrication and other conditions.
⑧Install a new timing belt on the pulley. Never pry or use too much force.
⑨Tighten to narrow the center distance of the transmission device until the tension tester detects that the timing belt tension is appropriate. Turn the driving wheel several times with your hands. Re-test tension.
⑩Tighten the assembly timing belt of the motor and correct the torque. Since any change in the center distance of the transmission device during operation will result in poor belt performance, it is important to ensure that all transmission components have been tightened.
⑪Start the device and observe the timing belt performance to see if there is abnormal vibration, and listen carefully if there is abnormal noise. It is best to turn off the machine and check the conditions of the bearing and motor.

Precautions

① Do not bend the timing belt by force.
It is strictly forbidden to bend the belt, which easily causes breakage
② Do not use in direct contact with water, solvent, oil, acid, alkali, UV, ozone, etc.
Do not directly contact water in operating environmentDo not use in acidic environmentsAvoid contact with alkaline solventsTry not to touch oil liquidsAvoid exposure to strong UV rays
③ Please timing belt avoid using or keeping at extreme high or low temperatures beyond the operating temperature range, or in humid environments.
④ During installation and maintenance, be sure to cut off the power supply and confirm that the machine is completely stopped before proceeding.
⑤ When there may be impurities, be sure to set the guard.

Application Industries

Food Semiconductor Smart phone
It is widely used in food transport and transfer Industry Application Industry Semiconductor Smartphone 3C IPHONE Huawei
Automotive Electronic & Electrical Appliances Medical
Application in automotive assembly production line Method of usage in electronic & electrical and home appliances industry Widely used in medical equipment, blood machines and other related equipment in the biomedical industry

Related Products

High Torque Timing Belt Pulleys S2M Type Flat Timing Belt For General Use Economy Series Toothed Timing Belt
S2M S3M S5M S8M S14M Type
TIMING PULLY High torque timing pulley MISUMI brand Pulley manufacturer S2M FLATBELT Flat belt Conveyor belt Transportation belt MISUMI brand Economy series Domestic S type tooth profile timing belt Low price Short delivery time
Reference timing belt model: HTPA48S2M040-B-N10 Reference timing belt model: HBLT350-4.23 Reference timing belt model: C-HTBN400S2M-40
Reason for recommendation: high transmission power, short delivery time, multiple types Reason for recommendation: intended use for transmission, rich variety of specifications and types Reason for recommendation: rich variety of specifications, high cost performance

Part Number 

  • Incomplete part number.
    Please use left hand selections to complete a part number.    Incomplete part number.
    Please use left hand selections to complete a part number.
Loading...Tải…
30
60
90
  1. << PrevTrước
  2. 1
  3. 2
  4. 3
  5. 4
  6. 5
  7. NextKế tiếp >>
Part Number
C-TBN1300H150SALE
C-TBN1300H200SALE
C-TBN1325H075SALE
C-TBN1325H100SALE
C-TBN1325H150SALE
C-TBN1325H200SALE
C-TBN1350H075SALE
C-TBN1350H100SALE
C-TBN1350H150SALE
C-TBN1350H200SALE
C-TBN1360H075SALE
C-TBN1360H100SALE
C-TBN1360H150SALE
C-TBN1360H200SALE
C-TBN1400H075SALE
C-TBN1400H100SALE
C-TBN1400H150SALE
C-TBN1400H200SALE
C-TBN1440H075SALE
C-TBN1440H100SALE
C-TBN1440H150SALE
C-TBN1440H200SALE
C-TBN1450H075SALE
C-TBN1450H100SALE
C-TBN1450H150SALE
C-TBN1450H200SALE
C-TBN145H075SALE
C-TBN145H100SALE
C-TBN145H150SALE
C-TBN145H200SALE
C-TBN1460H075SALE
C-TBN1460H100SALE
C-TBN1460H150SALE
C-TBN1460H200SALE
C-TBN1500H075SALE
C-TBN1500H100SALE
C-TBN1500H150SALE
C-TBN1500H200SALE
C-TBN1510H075SALE
C-TBN1510H100SALE
C-TBN1510H150SALE
C-TBN1510H200SALE
C-TBN1520H075SALE
C-TBN1520H100SALE
C-TBN1520H150SALE
C-TBN1520H200SALE
C-TBN1550H075SALE
C-TBN1550H100SALE
C-TBN1550H150SALE
C-TBN1550H200SALE
C-TBN1560H075SALE
C-TBN1560H100SALE
C-TBN1560H150SALE
C-TBN1560H200SALE
C-TBN1600H075SALE
C-TBN1600H100SALE
C-TBN1600H150SALE
C-TBN1600H200SALE
C-TBN1630H075SALE
C-TBN1630H100SALE
C-TBN1630H150SALE
C-TBN1630H200SALE
C-TBN1650H075SALE
C-TBN1650H100SALE
C-TBN1650H150SALE
C-TBN1650H200SALE
C-TBN1680H075SALE
C-TBN1680H100SALE
C-TBN1680H150SALE
C-TBN1680H200SALE
C-TBN1700H075SALE
C-TBN1700H100SALE
C-TBN1700H150SALE
C-TBN1700H200SALE
C-TBN170H075SALE
C-TBN170H100SALE
C-TBN170H150SALE
C-TBN170H200SALE
C-TBN1750H075SALE
C-TBN1750H100SALE
C-TBN1750H150SALE
C-TBN1750H200SALE
C-TBN1780H075SALE
C-TBN1780H100SALE
C-TBN1780H150SALE
C-TBN1780H200SALE
C-TBN1800H075SALE
C-TBN1800H100SALE
C-TBN1800H150SALE
C-TBN1800H200SALE
Part NumberPriceMinimum Order Qty.Volume DiscountDays to ShipSố ngày giao hàngBelt Width (mm)
(mm) 		Belt Norminal Width (Inch)
(Inch) 		Circumference Length
(mm) 		Number of Teeth

473,132 VND

402,162 VND

4 Piece(s) Available 8 Day(s) 38.11.53302260

628,506 VND

534,230 VND

4 Piece(s) Available 8 Day(s) 50.823302260

245,128 VND

208,359 VND

4 Piece(s) Available 8 Day(s) 19.10.753365.5265

323,735 VND

275,175 VND

4 Piece(s) Available 8 Day(s) 25.413365.5265

482,107 VND

409,791 VND

4 Piece(s) Available 8 Day(s) 38.11.53365.5265

640,480 VND

544,408 VND

4 Piece(s) Available 8 Day(s) 50.823365.5265

341,287 VND

290,094 VND

4 Piece(s) Available 8 Day(s) 19.10.753429270

451,544 VND

383,812 VND

4 Piece(s) Available 8 Day(s) 25.413429270

673,859 VND

572,780 VND

4 Piece(s) Available 8 Day(s) 38.11.53429270

896,208 VND

761,777 VND

4 Piece(s) Available 8 Day(s) 50.823429270

257,576 VND

218,940 VND

1 Piece(s) Available 13 Day(s) 19.10.75--

338,348 VND

287,596 VND

1 Piece(s) Available 13 Day(s) 25.41--

513,887 VND

436,804 VND

1 Piece(s) Available 13 Day(s) 38.11.5--

676,779 VND

575,262 VND

1 Piece(s) Available 13 Day(s) 50.82--

353,647 VND

300,600 VND

4 Piece(s) Available 8 Day(s) 19.10.753556280

468,035 VND

397,830 VND

4 Piece(s) Available 8 Day(s) 25.413556280

698,543 VND

593,762 VND

4 Piece(s) Available 8 Day(s) 38.11.53556280

929,123 VND

789,755 VND

4 Piece(s) Available 8 Day(s) 50.823556280

424,720 VND

361,012 VND

4 Piece(s) Available 8 Day(s) 19.10.753657.60288

562,505 VND

478,129 VND

4 Piece(s) Available 8 Day(s) 25.413657.60288

840,232 VND

714,197 VND

4 Piece(s) Available 8 Day(s) 38.11.53657.60288

1,118,062 VND

950,353 VND

4 Piece(s) Available 8 Day(s) 50.823657.60288

267,633 VND

227,488 VND

4 Piece(s) Available 8 Day(s) 19.10.753683290

353,620 VND

300,577 VND

4 Piece(s) Available 8 Day(s) 25.413683290

526,902 VND

447,867 VND

4 Piece(s) Available 8 Day(s) 38.11.53683290

700,257 VND

595,218 VND

4 Piece(s) Available 8 Day(s) 50.823683290

43,219 VND

36,736 VND

4 Piece(s) Available 8 Day(s) 19.10.75368.329

43,548 VND

37,016 VND

4 Piece(s) Available 8 Day(s) 25.41368.329

60,683 VND

51,581 VND

4 Piece(s) Available 8 Day(s) 38.11.5368.329

78,593 VND

66,804 VND

4 Piece(s) Available 8 Day(s) 50.82368.329

275,616 VND

234,274 VND

1 Piece(s) Available 13 Day(s) 19.10.75--

362,321 VND

307,973 VND

1 Piece(s) Available 13 Day(s) 25.41--

549,805 VND

467,334 VND

1 Piece(s) Available 13 Day(s) 38.11.5--

724,643 VND

615,947 VND

1 Piece(s) Available 13 Day(s) 50.82--

276,570 VND

235,085 VND

4 Piece(s) Available 8 Day(s) 19.10.753810300

365,527 VND

310,698 VND

4 Piece(s) Available 8 Day(s) 25.413810300

544,852 VND

463,124 VND

4 Piece(s) Available 8 Day(s) 38.11.53810300

724,137 VND

615,516 VND

4 Piece(s) Available 8 Day(s) 50.823810300

278,760 VND

236,946 VND

4 Piece(s) Available 8 Day(s) 19.10.753835.40302

367,964 VND

312,769 VND

4 Piece(s) Available 8 Day(s) 25.413835.40302

548,736 VND

466,426 VND

4 Piece(s) Available 8 Day(s) 38.11.53835.40302

728,908 VND

619,572 VND

4 Piece(s) Available 8 Day(s) 50.823835.40302

280,174 VND

238,148 VND

4 Piece(s) Available 8 Day(s) 19.10.753860.8304

370,294 VND

314,750 VND

4 Piece(s) Available 8 Day(s) 25.413860.8304

552,021 VND

469,218 VND

4 Piece(s) Available 8 Day(s) 38.11.53860.8304

733,712 VND

623,655 VND

4 Piece(s) Available 8 Day(s) 50.823860.8304

285,615 VND

242,773 VND

4 Piece(s) Available 8 Day(s) 19.10.753937310

377,504 VND

320,878 VND

4 Piece(s) Available 8 Day(s) 25.413937310

562,762 VND

478,348 VND

4 Piece(s) Available 8 Day(s) 38.11.53937310

748,091 VND

635,877 VND

4 Piece(s) Available 8 Day(s) 50.823937310

287,382 VND

244,275 VND

4 Piece(s) Available 8 Day(s) 19.10.753962.4312

379,904 VND

322,918 VND

4 Piece(s) Available 8 Day(s) 25.413962.4312

566,364 VND

481,409 VND

4 Piece(s) Available 8 Day(s) 38.11.53962.4312

752,858 VND

639,929 VND

4 Piece(s) Available 8 Day(s) 50.823962.4312

294,588 VND

250,400 VND

4 Piece(s) Available 8 Day(s) 19.10.754064320

389,477 VND

331,055 VND

4 Piece(s) Available 8 Day(s) 25.414064320

580,673 VND

493,572 VND

4 Piece(s) Available 8 Day(s) 38.11.54064320

771,971 VND

656,175 VND

4 Piece(s) Available 8 Day(s) 50.824064320

306,230 VND

260,296 VND

1 Piece(s) Available 13 Day(s) 19.10.75--

403,064 VND

342,604 VND

1 Piece(s) Available 13 Day(s) 25.41--

610,879 VND

519,247 VND

1 Piece(s) Available 13 Day(s) 38.11.5--

806,129 VND

685,210 VND

1 Piece(s) Available 13 Day(s) 50.82--

303,597 VND

258,057 VND

4 Piece(s) Available 8 Day(s) 19.10.754191330

401,384 VND

341,176 VND

4 Piece(s) Available 8 Day(s) 25.414191330

598,620 VND

508,827 VND

4 Piece(s) Available 8 Day(s) 38.11.54191330

795,853 VND

676,475 VND

4 Piece(s) Available 8 Day(s) 50.824191330

492,427 VND

418,563 VND

4 Piece(s) Available 8 Day(s) 19.10.754267.2336

652,544 VND

554,662 VND

4 Piece(s) Available 8 Day(s) 25.414267.2336

975,358 VND

829,054 VND

4 Piece(s) Available 8 Day(s) 38.11.54267.2336

1,298,102 VND

1,103,387 VND

4 Piece(s) Available 8 Day(s) 50.824267.2336

427,953 VND

363,760 VND

4 Piece(s) Available 8 Day(s) 19.10.754318340

566,851 VND

481,823 VND

4 Piece(s) Available 8 Day(s) 25.414318340

846,800 VND

719,780 VND

4 Piece(s) Available 8 Day(s) 38.11.54318340

1,126,749 VND

957,737 VND

4 Piece(s) Available 8 Day(s) 50.824318340

43,402 VND

36,892 VND

4 Piece(s) Available 8 Day(s) 19.10.75431.834

48,953 VND

41,610 VND

4 Piece(s) Available 8 Day(s) 25.41431.834

69,938 VND

59,447 VND

4 Piece(s) Available 8 Day(s) 38.11.5431.834

90,994 VND

77,345 VND

4 Piece(s) Available 8 Day(s) 50.82431.834

321,545 VND

273,313 VND

4 Piece(s) Available 8 Day(s) 19.10.754445350

425,300 VND

361,505 VND

4 Piece(s) Available 8 Day(s) 25.414445350

634,512 VND

539,335 VND

4 Piece(s) Available 8 Day(s) 38.11.54445350

843,649 VND

717,102 VND

4 Piece(s) Available 8 Day(s) 50.824445350

638,007 VND

542,306 VND

1 Piece(s) Available 13 Day(s) 19.10.75--

842,166 VND

715,841 VND

1 Piece(s) Available 13 Day(s) 25.41--

1,250,645 VND

1,063,048 VND

1 Piece(s) Available 13 Day(s) 38.11.5--

1,659,122 VND

1,410,254 VND

1 Piece(s) Available 13 Day(s) 50.82--

330,552 VND

280,969 VND

4 Piece(s) Available 8 Day(s) 19.10.754572360

437,276 VND

371,685 VND

4 Piece(s) Available 8 Day(s) 25.414572360

652,457 VND

554,588 VND

4 Piece(s) Available 8 Day(s) 38.11.54572360

867,605 VND

737,464 VND

4 Piece(s) Available 8 Day(s) 50.824572360

Loading...Tải…

  1. << PrevTrước
  2. 1
  3. 2
  4. 3
  5. 4
  6. 5
  7. NextKế tiếp >>

Basic InformationThông tin cơ bản

Belt Type H Belt Shape Closed End Belt Material Rubber Belt
Belt Tooth Surface Standard (Single Sided) Core Wire Material Glass Fiber Belt Shape Type Trapezoidal Tooth Profile Circular Type
Transmission Torque Regular Torque Transmission

Frequently asked question (FAQ)FAQ

Question:Question: Why is the order model of the timing belt inconsistent with the actual belt label and engraving?
Answer:Answer: Order model is MISUMI product model, the label on the belt or printed model on the belt surface is the belt manufacturer model, which varies with manufacturer, but there will be no influence on the product itself.
Question:Question: The timing belt has been broken after use for a very short period of time. Is there a problem with the quality of the belt?
Answer:Answer: The timing belt is a standard product, and the same batch of products have very few individual quality problems, please refer to P.2875【Main causes of premature breakage and corresponding countermeasures】to troubleshoot the equipment in use.
Question:Question: Can alteration be made to the timing belt?
Answer:Answer: Alteration cannot be made to the circumference of the timing belt, and partial alteration can be made to the width.
Question:Question: What kind of belt is better to use under conditions that require high cleanliness?
Answer:Answer: The use of urethane belts is recommended, which has significantly improved dust drop, compared to the rubber belt.
Question:Question: What are the two main types of timing belts according to their functions? What is the role?
Answer:Answer: Timing belts are mainly divided into transmission type and driving type. For transmission type, the load can be placed on the timing belt surface for transmission. For driving type, no load is carried, and only the role of transmitting torque is played, which is similar to the role of chain.
Question:Question: How to judge or measure whether the belt tension meets the installation requirements?
Answer:Answer: It is recommended that the customer purchase the tension meter by himself and make a judgment according to the calculation formula of the initial design.
Question:Question: Which tooth type of the timing belt has the smallest clearance? What will it affect?
Answer:Answer: The arc tooth type has minimum clearance, which can improve such indicators as positioning accuracy and rigidity.

Check other FAQ (4 items) HideĐóng.

About MISUMIVề Misumi

About this WebsiteVề trang Web này

Useful ToolsCác công cụ hữu ích

Customer ServiceDịch vụ chăm sóc khách hàng

MISUMI Contact Monday to Saturday: 8:00 am - 5:00 pm Order cut off time is 5:00 pm Thứ 2 đến Thứ 7: 8 giờ sáng đến 5 giờ chiều Hạn chót đặt hàng là 5 giờ chiều

  • Tel:Số điện thoại:0222-361-1555
  • Fax:Số Fax:0222-361-2555
  • InquiryYêu cầu

MISUMI APP

MISUMI APP QR

Install MISUMI APP

Mobile View Xem trên điện thoại

MISUMI Vietnam Company Limited, Legal Representative: Tomohiro Watanabe,
phone: 0222-361-1555, e-mail: [email protected], Enterprise Code: 0107514576,
Date of Issuance: 22 July 2016, Place of Issuance: Bac Ninh, Business Certificate No. 6573041568-KD dated 27 September 2016 issued by the People's Committee of Bac Ninh

Công ty TNHH MISUMI Việt Nam, Đại diện theo pháp luật: Tomohiro Watanabe,
Điện thoại: 0222-361-1555, e-mail: [email protected], Mã số doanh nghiệp: 0107514576,
ngày cấp 22/7/2016, nơi cấp: Bắc Ninh, Giấy phép kinh doanh số: 6573041568-KD ngày cấp 27/9/2016 bởi UBND tỉnh Bắc Ninh

online.gov.vn

Copyright © MISUMI Corporation All Rights Reserved.