(!) Since support from Microsoft will end on January 14th, 2020, Windows 7 will be excluded from the recommended environment from December 15th, 2019 on this site. Vì lý do Microsoft kết thúc hỗ trợ cho Windows 7 vào ngày 14/01/2020, Windows 7 sẽ là hệ điều hành không được khuyến khích sử dụng với trang web này từ ngày 15/12/2019.

Tel. Tel: 0222-361-1555 Email: [email protected] 8:00 - 17:00 (Mon - Sat)
Webcode Seach | Series
#CODE
Keyword suggestionsTừ khóa gợi ý
Part number suggestionsGợi ý mã sản phẩm
Discontinued Products

Search by Category / Brand Tìm theo danh mục, nhãn hiệu

Search by Category Tìm theo danh mục

  • Viewed
    Products     Sản phẩm
    đã xem     최근 본
    상품     查看产品 查看產品
  • My
    Components     Linh kiện
    của tôi     나의 부품 我的部件 我的部件
  • Cart
Recently Viewed Products
X
My Components
X
Cart item(s)
X
Loading...
  • [Thông báo] Cập nhật địa chỉ kho tập kết hàng hóa tại khu vực miền Nam của MISUMI Việt Nam. Xem chi tiết.
    [Announcement] Update on warehouse address in the Southern region of MISUIMI Vietnam. See more. 
  • [Cảnh Báo] Thủ Đoạn Lừa Đảo Từ Nhân Viên Giao Hàng – Yêu Cầu Trả Phí Ship. Xem chi tiết.
    [Warning] Fraud Calling from Shipper - Asking to Pay Shipping Fee. See more.

  • How can we improve?

    How can we improve?

    Comments
    Name (Optional)
    E-mail Address (Optional)
    Tel (Optional)

    While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
    Customer Privacy Policy

    Thank you for your cooperation.

    While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
    Please use the inquiry form.

    Customer Privacy Policy

ConfigureTạo

Clear AllQuet sạch tât cả

Part number has not been determine

(551 Part Numbers Available)
Configure Remaining SpecificationsĐịnh cấu hình các thông số còn lại

Part Number CompleteĐã hoàn thành

C-TBN86L050
loading

Specification/DimensionsĐặc điểm kỹ thuật / Kích thướcĐặc điểm kỹ thuật / Kích thước

  • Belt Width (mm)(mm)

    • 12.7
    • 19.1
    • 25.4
    • 38.1

    ClearTrống

  • Core Wire Material

    • Glass Fiber
      • Glass Core Wire
      • Glass Fiber

    ClearTrống

  • Belt Norminal Width (Inch)(Inch)

    • 0.5
    • 0.75
    • 1
    • 1.5

    ClearTrống

  • Circumference Length(mm)

    • 247.65
    • 276.23
    • 285.75
    • 304.8
    • 314.33
    • 333.38
    • 342.9
    • 361.95
    • 381
    • 390.53
    • 400.05
    • 409.58
    • 419.1
    • 428.63
    • 438.15
    • 447.68
    • 457.2
    • 466.73
    • 476.25
    • 485.78
    • 495.30
    • 504.83
    • 514.35
    • 523.88
    • 533.4
    • 542.93
    • 552.45
    • 561.98
    • 571.5
    • 581.03
    • 590.55
    • 600.08
    • 609.6
    • 619.13
    • 628.65
    • 638.18
    • 647.7
    • 657.23
    • 666.75
    • 676.28
    • 685.8
    • 695.33
    • 704.85
    • 714.38
    • 723.9
    • 733.43
    • 742.95
    • 752.48
    • 762
    • 771.53
    • 781.05
    • 790.58
    • 800.1
    • 819.15
    • 828.68
    • 838.2
    • 847.73
    • 857.25
    • 866.78
    • 876.3
    • 895.35
    • 904.88
    • 914.4
    • 933.45
    • 942.98
    • 952.5
    • 962.03
    • 971.55
    • 990.6
    • 1000.13
    • 1009.65
    • 1019.18
    • 1028.7
    • 1038.23
    • 1047.75
    • 1066.8
    • 1085.85
    • 1095.38
    • 1104.9
    • 1114.43
    • 1123.95
    • 1133.48
    • 1143
    • 1152.53
    • 1162.05
    • 1171.58
    • 1181.1
    • 1200.15
    • 1219.2
    • 1247.78
    • 1257.30
    • 1266.83
    • 1295.4
    • 1314.45
    • 1333.5
    • 1343.03
    • 1371.6
    • 1390.65
    • 1400.18
    • 1409.7
    • 1419.23
    • 1438.28
    • 1447.8
    • 1457.33
    • 1476.38
    • 1485.9
    • 1524
    • 1562.1
    • 1571.63
    • 1600.2
    • 1609.73
    • 1657.35
    • 1676.4
    • 1762.13
    • 1771.65
    • 1781.18
    • 1828.8
    • 1847.85
    • 1857.38
    • 1905
    • 1943.1
    • 1952.63
    • 2047.88
    • 2076.45
    • 2190.75
    • 2286
    • 2324.1
    • 2524.13
    • 2647.95
    • 2914.65
    • 4257.68

    ClearTrống

  • Number of Teeth

    • 26
    • 29
    • 30
    • 32
    • 33
    • 35
    • 36
    • 38
    • 40
    • 41
    • 42
    • 43
    • 44
    • 45
    • 46
    • 47
    • 48
    • 49
    • 50
    • 51
    • 52
    • 53
    • 54
    • 55
    • 56
    • 57
    • 58
    • 59
    • 60
    • 61
    • 62
    • 63
    • 64
    • 65
    • 66
    • 67
    • 68
    • 69
    • 70
    • 71
    • 72
    • 73
    • 74
    • 75
    • 76
    • 77
    • 78
    • 79
    • 80
    • 81
    • 82
    • 83
    • 84
    • 86
    • 87
    • 88
    • 89
    • 90
    • 91
    • 92
    • 94
    • 95
    • 96
    • 98
    • 99
    • 100
    • 101
    • 102
    • 104
    • 105
    • 106
    • 107
    • 108
    • 109
    • 110
    • 112
    • 114
    • 115
    • 116
    • 117
    • 118
    • 119
    • 120
    • 121
    • 122
    • 123
    • 124
    • 126
    • 128
    • 131
    • 132
    • 133
    • 136
    • 138
    • 140
    • 141
    • 144
    • 146
    • 147
    • 148
    • 149
    • 151
    • 152
    • 153
    • 155
    • 156
    • 160
    • 164
    • 165
    • 168
    • 169
    • 174
    • 176
    • 185
    • 186
    • 187
    • 192
    • 194
    • 195
    • 200
    • 204
    • 205
    • 215
    • 218
    • 230
    • 240
    • 244
    • 265
    • 278
    • 306
    • 447

    ClearTrống

  • type

    • C-TBN□□□L

    ClearTrống

  • CADCAD

    • 2D
    • 3D

    ClearTrống

Days to ShipSố ngày giao hàng

    • Alltất cả các
    • Same day
    • 8 Day(s) or Less
    • 13 Day(s) or Less

    ClearTrống

Specify AlterationsChỉ định thay đổi

Timing Belts L

Timing Belts L
  • Sale
  • Until 31/12/2024
  • Volume Discount
Check FAQ of this product (7 items)
You can add up to 6 items per a category to the compare list.

Brand :

MISUMI

MiSUMi Economy

MISUMI

Filter By :
  • All
  • Sale Items
Part Number :
551 Part Numbers Available

C-TBN86L050 SALE

C-TBN86L075 SALE

C-TBN86L100 SALE

C-TBN86L150 SALE

C-TBN98L050 SALE

C-TBN98L075 SALE

C-TBN98L100 SALE

C-TBN98L150 SALE

C-TBN1043L050 SALE

C-TBN1043L075 SALE

C-TBN1043L100 SALE

C-TBN1043L150 SALE

C-TBN109L050 SALE

C-TBN109L075 SALE

C-TBN109L100 SALE

C-TBN109L150 SALE

C-TBN113L050 SALE

C-TBN113L075 SALE

C-TBN113L100 SALE

C-TBN113L150 SALE

C-TBN86L050
C-TBN86L050

Copy Part Number URL to Clipboard

The part number URL has been copied into your clipboard.

Close

loading
    • From :
      20,019VND/Unit
  • Order Qty :
  • Total Price :
    ---
  • Days to ship :
    ---

Select part number to Order Now/ Add to Cart

(i)

Caution

thận trọng

  • **RoHS Compliant is available for some part numbers.
    Please contact with MISUMI for detail effective date.

CAD Download
My Components
My Components
Similar ProductsSimilar Products
Product DetailProduct Detail

Product Description

Timing Belts L.
It is a trapezoidal tooth profile timing belt. This belt always uses for regular torque transmission in an automation machine
[Features]
• Belt Shape: Closed End
• Belt Tooth Type: L (trapezoidal tooth profile)
• Tooth Pitch: 9.525 mm.
• Belt Width: 12.7, 19.1, 25.4, and 38.1 mm.
• Circumference Length Shortest/Longest: 247.65 mm. and 4257.68 mm.
• Belt Operating Temperature Range: －30 to 90℃.
• Material:
Tooth rubber: Chloroprene
Core wire: Glass Fiber
Tooth surface protection layer: Nylon canvas
[Applications]
Suitable for use with a timing pulley in a transmission system in an automation machine
See more ...



Economy L-Type Timing Belt

Material: ChloropreneGlass fiber (core)Nylon canvas (tooth surface protection layer)

- Chloroprene Material: Offers excellent resistance to abrasion, oil, and grease, ensuring long-lasting performance.

- Length and Width: Select from a wide range of belt lengths and widths.

- Precise Trapezoidal Tooth Profile: Ensures smooth and efficient power transmission with minimal noise and vibration.

- Glass Fiber Reinforced Core: Provides exceptional strength and tensile strength, preventing belt elongation and slippage.

- Wide Operating Temperature Range: Functions reliably in temperatures from -30°C to 90°C, expanding application possibilities.

Economy L-Type Timing Belt
MISUMI Economy Logo

MISUMI Standard
MISUMI Standard

Cheaper Price
Cheaper Price

Product Variety
Product Variety

3D CAD
3D CAD Support


Product Overview

Usually, timing pulleys and timing belt are widely used to design mechanisms for transmitting rotational power generated by motors.
Driving and transmission are realized through the engagement between the teeth of timing pulleys and timing belts.
Local production in China delivers MISUMI quality at low price.

Dimensional Drawing

MISUMI Complete specifications Factory direct sales Original quality

■ Material/Specification Table
timing belt Material
① Tooth surface protection layerNylon canvas
② Tooth rubberChloroprene
③ Core wireGlass Fiber

Specifications Overview

TypesTooth pitch2θLrhHRrRaUnit weight
g/m (Width: 10mm)
L9.52540°4.651.913.610.510.5132.0 (30.0)
timing beltPlease note that the meaning of the belt number of toothed timing belt varies with type.
 The belt circumference length of L (inch size) is the belt number.
timing beltBelt circumference length is core wire length.
timing beltC-TBN belt operating temperature range: -30 to 90 ℃.
timing beltThe model engraved on the back of the product is the manufacturer model.
timing beltMISUMI makes no commitment to this product brand.
timing beltFor the transmission capacity and calculation and design method of economy series timing belt, please refer to the national standard (GB) design manual.
Specification Table
■ Specification Table
Please order after selecting part number and parameters according to the selection steps to .
Ordering Example Part Number (TypeBelt Number Nominal Belt Width)
 C-TBN330L050

■ C-TBN
Tooth profile L (Pitch: 12.7mm) 
Part NumberBelt
Nominal Width		Number of TeethBelt Circumference Length
(mm)
TypeBelt Number
C-TBN86L050
(12.7mm)

075
(19.1mm)

100
(25.4mm)

150
(38.1mm)		23219.08
98L26247.65
109L29276.23
113L30285.75
120L32304.80
124L33314.33
131L35333.38
135L36342.90
143L38361.95
150L40381.00
154L41390.53
158L42400.05
161L43409.58
165L44419.10
169L45428.63
173L46438.15
176L47447.68
180L48457.20
185L49466.73
187L50476.25
191L51485.78
195L52495.30
200L53504.83
202L54514.35
206L55523.88
210L56533.40
214L57542.93
217L58552.45
220L59561.98
225L60571.50
230L61581.03
232L62590.55
236L63600.08
240L64609.60
244L65619.13
248L66628.65
251L67638.18
255L68647.70
260L69657.23
263L70666.75
265L71676.28
270L72685.80
275L73695.33
277L74704.85
281L75714.38
285L76723.90
289L77733.43
292L78742.95
297L79752.48
300L80762.00
303L81771.53
307L82781.05
310L83790.58
315L84800.10
322L86819.15
326L87828.68
330L88838.20
334L89847.73
337L90857.25
341L91866.78
345L92876.30
352L94895.35
355L95904.88
360L96914.40
367L98933.45
371L99942.98
375L100952.50
382L102971.55
390L104990.60
394L1051000.13
397L1061009.65
401L1071019.18
405L1081028.70
408L1091038.23
412L1101047.75
420L1121066.80
427L1141085.85
431L1151095.38
435L1161104.90
439L1171114.43
442L1181123.95
446L1191133.48
450L1201143.00
453L1211152.53
457L1221162.05
461L1231171.58
465L1241181.10
472L1261200.15
480L1281219.20
492L1311247.78
495L1321257.30
500L1331266.83
510L1361295.40
514L1371304.93
517L1381314.45
525L1401333.50
540L1441371.60
547L1461390.65
548L1461390.65
550L1471400.18
555L1481409.70
558L1491419.23
566L1511438.28
570L1521447.80
574L1531457.33
581L1551476.38
585L1561485.90
600L1601524.00
619L1651571.63
630L1681600.20
634L1691609.73
653L1741657.35
660L1761676.40
675L1801714.50
694L1851762.13
697L1861771.65
700L1871781.18
720L1921828.80
728L1941847.85
731L1951857.38
739L1971876.43
750L2001905.00
765L2041943.10
769L2051952.63
787L2102000.25
806L2152047.88
817L2182076.45
863L2302190.75
900L2402286.00
915L2442324.10
983L2622495.55
994L2652524.13
1043L2782647.95
1148L3062914.65
1200L3203048.00
1676L4474257.68


Product Features

S type circular tooth profile economy series timing belt is made of rubber, featuring deviation prevention and wear resistance■ S type circular tooth profile rubber timing belt (S2M/S3M/S5M/S8M/S14M)
Feature 1: Reasonable semi-circular arc tooth profile design can provide higher torque to adapt to high load transmission.
Feature 2: Reduce the noise generated by high-speed operation.
Feature 3: Tooth peak changes under force, ensuring a longer life than conventional circular tooth profile teeth.
Feature 4: Have certain conductivity
Feature 5: timing belt Operating Temperature Range: -30 to 90℃.
Features of P type domestic high-accuracy circular tooth profile timing belt■ P type circular tooth profile rubber timing belt (P5M/P8M)
Feature 1: Reasonable semi-circular arc tooth profile design can provide higher torque to adapt to high load transmission.
Feature 2: Special concave tooth peak design, better reducing noise generated by high-speed operation.
Feature 3: timing belt Tooth peak changes under force, ensuring greater accuracy than conventional circular tooth profile teeth.
Feature 4: Have certain conductivity
Feature 5: Operating Temperature Range: -25 to 80℃.
MXL, XL, L, H trapezoidal tooth profile timing belts are suitable for light load transmission and driving■ Trapezoidal tooth profile rubber timing belt (MXL/XL/H/T5/T10)
Feature 1: Suitable for light load transmission, standard torque driving.
Feature 2: Tooth rubber uses chloroprene to protect core wire, providing excellent bending fatigue resistance, heat resistance, oil resistance
Feature 3: Ideal choice of economical and maintenance-free alternative to traditional transmission method.
Feature 4: Have certain conductivity
Feature 5: timing belt Operating Temperature Range: -30 to 90℃ (MXL/XL/L/H), 0 to 80℃ (T5/T10)

Usage Method

■ Installation method for timing belt transmission
①Turn off the power supply, remove the protective cover, loosen the motor assembly timing belt, move the motor so that the belt is loose enough. The belt can be removed without prying. Never try to pry the belt down.
②Remove the old timing belt and check for abnormal wear. Excessive wear may mean that there are problems in the design or maintenance of the transmission device.
③Choose the right timing belt to replace.
④To clean the belt and pulley, wipe with a cloth dipped in a small amount of non-volatile liquid. Soaking in detergent or scrubbing the belt with detergent is not advisable. To remove grease, it is also undesirable to wipe with sandpaper or scratch with a sharp object. The timing belt must be kept dry before installation and use.
⑤Check the pulley for abnormal wear or cracks. If the wear is excessive, the pulley must be replaced.
⑥Check whether the pulley is linearly symmetrical. Linear symmetry of the pulley is essential for the operation of the timing belt, especially the timing belt transmission device.
Asymmetry of the pulley is shown as follows:
 Usage method Installation guide Complete selection Fit installation
⑦Check the remaining transmission device components, such as bearings and bushings, for symmetry, durability, lubrication and other conditions.
⑧Install a new timing belt on the pulley. Never pry or use too much force.
⑨Tighten to narrow the center distance of the transmission device until the tension tester detects that the belt tension is appropriate. Turn the driving wheel several times with your hands. Re-test tension.
⑩Tighten the assembly timing belt of the motor and correct the torque. Since any change in the center distance of the transmission device during operation will result in poor belt performance, it is important to ensure that all transmission components have been tightened.
⑪Start the device and observe the timing belt performance to see if there is abnormal vibration, and listen carefully if there is abnormal noise. It is best to turn off the machine and check the conditions of the bearing and motor.

Precautions

① Do not bend the timing belt by force.
It is strictly forbidden to bend the belt, which easily causes breakage
② Do not use in direct contact with water, solvent, oil, acid, alkali, UV, ozone, etc.
Do not directly contact water in operating environmentDo not use in acidic environmentsAvoid contact with alkaline solventsTry not to touch oil liquidsAvoid exposure to strong UV rays
③ Please avoid using or keeping at extreme high or low temperatures beyond the operating temperature range, or in humid environments.
④ During installation and maintenance, be sure to cut off the power supply and confirm that the machine is completely stopped before proceeding.
⑤ When there may be impurities, be sure to set the guard.

Example of Use

Usage Method Example DrawingInstructions for use of timing wheel and timing belt
The TIMING BELT is installed on the motor and the rotating shaft to transmit the rotational force① Driving (The driven wheel is driven by the driving wheel for transmission)
Transmission belt, used for repeated motion with the object not rotating and high requirements on positioning accuracy② Transmission (Used for repeated motion with the object not rotating and high requirements on positioning accuracy)
Usage Method Example DrawingInstructions for use of timing wheel and timing belt
Plates are conveyed by two timing toothed belts③Conveyance (Plates are conveyed by two timing toothed belts)
Usage method and example for conveyor belt lifting, repeated positioning motion④Traction transmission (Workpieces are clamped and transmitted by the timing belt)

Application Industries

Food Semiconductor Smart phone
It is widely used in food transport and transfer Industry Application Industry Semiconductor Smartphone 3C IPHONE Huawei
Automotive Electronic & Electrical Appliances Medical
Application in automotive assembly production line Method of usage in electronic & electrical and home appliances industry Widely used in medical equipment, blood machines and other related equipment in the biomedical industry

Related Products

High Torque Timing Pulleys S2M Type Flat Timing Belt For General Use Economy Series Toothed Timing Belt
S2M S3M S5M S8M S14M Type
TIMING PULLY High torque timing pulley MISUMI brand Pulley manufacturer S2M FLATBELT Flat belt Conveyor belt Transportation belt MISUMI brand Economy series Domestic S type tooth profile timing belt Low price Short delivery time
Reference timing belt model: HTPA48S2M040-B-N10 Reference timing belt model: HBLT350-4.23 Reference timing belt model: C-HTBN400S2M-40
Reason for recommendation: high transmission power, short delivery time, multiple types Reason for recommendation: intended use for transmission, rich variety of specifications and types Reason for recommendation: rich variety of specifications, high cost performance

Part Number 

  • Incomplete part number.
    Please use left hand selections to complete a part number.    Incomplete part number.
    Please use left hand selections to complete a part number.
Loading...Tải…
30
45
60
  1. 1
  2. 2
  3. 3
  4. 4
  5. 5
  6. NextKế tiếp >>
Part Number
C-TBN86L050SALE
C-TBN86L075SALE
C-TBN86L100SALE
C-TBN86L150SALE
C-TBN98L050SALE
C-TBN98L075SALE
C-TBN98L100SALE
C-TBN98L150SALE
C-TBN1043L050SALE
C-TBN1043L075SALE
C-TBN1043L100SALE
C-TBN1043L150SALE
C-TBN109L050SALE
C-TBN109L075SALE
C-TBN109L100SALE
C-TBN109L150SALE
C-TBN113L050SALE
C-TBN113L075SALE
C-TBN113L100SALE
C-TBN113L150SALE
C-TBN1148L050SALE
C-TBN1148L075SALE
C-TBN1148L100SALE
C-TBN1148L150SALE
C-TBN1200L050SALE
C-TBN1200L075SALE
C-TBN1200L100SALE
C-TBN1200L150SALE
C-TBN120L050SALE
C-TBN120L075SALE
C-TBN120L100SALE
C-TBN120L150SALE
C-TBN124L050SALE
C-TBN124L075SALE
C-TBN124L100SALE
C-TBN124L150SALE
C-TBN131L050SALE
C-TBN131L075SALE
C-TBN131L100SALE
C-TBN131L150SALE
C-TBN135L050SALE
C-TBN135L075SALE
C-TBN135L100SALE
C-TBN135L150SALE
C-TBN143L050SALE
C-TBN143L075SALE
C-TBN143L100SALE
C-TBN143L150SALE
C-TBN150L050SALE
C-TBN150L075SALE
C-TBN150L100SALE
C-TBN150L150SALE
C-TBN154L050SALE
C-TBN154L075SALE
C-TBN154L100SALE
C-TBN154L150SALE
C-TBN158L050SALE
C-TBN158L075SALE
C-TBN158L100SALE
C-TBN158L150SALE
Part NumberPriceMinimum Order Qty.Volume DiscountDays to ShipSố ngày giao hàngBelt Width (mm)
(mm) 		Core Wire Material Belt Norminal Width (Inch)
(Inch) 		Circumference Length
(mm) 		Number of Teeth

20,019 VND

17,016 VND

1 Piece(s) Available 13 Day(s) 12.7[Glass Fiber] Glass Core Wire0.5--

20,023 VND

17,020 VND

1 Piece(s) Available 13 Day(s) 19.1[Glass Fiber] Glass Core Wire0.75--

38,109 VND

32,393 VND

1 Piece(s) Available 13 Day(s) 25.4[Glass Fiber] Glass Core Wire1--

38,117 VND

32,399 VND

1 Piece(s) Available 13 Day(s) 38.1[Glass Fiber] Glass Core Wire1.5--

28,452 VND

24,184 VND

1 Piece(s) Available Same day 12.7[Glass Fiber] Glass Fiber0.5247.6526

28,633 VND

24,338 VND

4 Piece(s) Available 8 Day(s) 19.1[Glass Fiber] Glass Fiber0.75247.6526

42,929 VND

36,490 VND

4 Piece(s) Available 8 Day(s) 25.4[Glass Fiber] Glass Fiber1247.6526

44,069 VND

37,459 VND

4 Piece(s) Available 8 Day(s) 38.1[Glass Fiber] Glass Fiber1.5247.6526

139,285 VND

118,392 VND

4 Piece(s) Available 8 Day(s) 12.7[Glass Fiber] Glass Fiber0.52647.95278

205,964 VND

175,069 VND

4 Piece(s) Available 8 Day(s) 19.1[Glass Fiber] Glass Fiber0.752647.95278

271,583 VND

230,846 VND

4 Piece(s) Available 8 Day(s) 25.4[Glass Fiber] Glass Fiber12647.95278

403,844 VND

343,267 VND

4 Piece(s) Available 8 Day(s) 38.1[Glass Fiber] Glass Fiber1.52647.95278

28,488 VND

24,215 VND

1 Piece(s) Available Same day 12.7[Glass Fiber] Glass Fiber0.5276.2329

28,705 VND

24,399 VND

4 Piece(s) Available 8 Day(s) 19.1[Glass Fiber] Glass Fiber0.75276.2329

43,037 VND

36,581 VND

4 Piece(s) Available 8 Day(s) 25.4[Glass Fiber] Glass Fiber1276.2329

48,378 VND

41,121 VND

4 Piece(s) Available 8 Day(s) 38.1[Glass Fiber] Glass Fiber1.5276.2329

31,265 VND

26,575 VND

1 Piece(s) Available Same day 12.7[Glass Fiber] Glass Fiber0.5285.7530

43,454 VND

36,936 VND

4 Piece(s) Available 8 Day(s) 19.1[Glass Fiber] Glass Fiber0.75285.7530

55,529 VND

47,200 VND

4 Piece(s) Available 8 Day(s) 25.4[Glass Fiber] Glass Fiber1285.7530

79,818 VND

67,845 VND

4 Piece(s) Available 8 Day(s) 38.1[Glass Fiber] Glass Fiber1.5285.7530

152,562 VND

129,678 VND

4 Piece(s) Available 8 Day(s) 12.7[Glass Fiber] Glass Fiber0.52914.65306

225,951 VND

192,058 VND

4 Piece(s) Available 8 Day(s) 19.1[Glass Fiber] Glass Fiber0.752914.65306

298,178 VND

253,451 VND

4 Piece(s) Available 8 Day(s) 25.4[Glass Fiber] Glass Fiber12914.65306

443,824 VND

377,250 VND

4 Piece(s) Available 8 Day(s) 38.1[Glass Fiber] Glass Fiber1.52914.65306

159,361 VND

135,457 VND

1 Piece(s) Available 13 Day(s) 12.7[Glass Fiber] Glass Core Wire0.5--

237,185 VND

201,607 VND

1 Piece(s) Available 13 Day(s) 19.1[Glass Fiber] Glass Core Wire0.75--

321,331 VND

273,131 VND

1 Piece(s) Available 13 Day(s) 25.4[Glass Fiber] Glass Core Wire1--

475,637 VND

404,291 VND

1 Piece(s) Available 13 Day(s) 38.1[Glass Fiber] Glass Core Wire1.5--

32,052 VND

27,244 VND

4 Piece(s) Available 8 Day(s) 12.7[Glass Fiber] Glass Fiber0.5304.832

42,893 VND

36,459 VND

1 Piece(s) Available Same day 19.1[Glass Fiber] Glass Fiber0.75304.832

51,156 VND

43,483 VND

4 Piece(s) Available 8 Day(s) 25.4[Glass Fiber] Glass Fiber1304.832

73,258 VND

62,269 VND

4 Piece(s) Available 8 Day(s) 38.1[Glass Fiber] Glass Fiber1.5304.832

32,186 VND

27,358 VND

1 Piece(s) Available Same day 12.7[Glass Fiber] Glass Fiber0.5314.3333

46,423 VND

39,460 VND

1 Piece(s) Available Same day 19.1[Glass Fiber] Glass Fiber0.75314.3333

52,461 VND

44,592 VND

4 Piece(s) Available 8 Day(s) 25.4[Glass Fiber] Glass Fiber1314.3333

75,270 VND

63,980 VND

4 Piece(s) Available 8 Day(s) 38.1[Glass Fiber] Glass Fiber1.5314.3333

35,265 VND

29,975 VND

4 Piece(s) Available 8 Day(s) 12.7[Glass Fiber] Glass Fiber0.5333.3835

49,525 VND

42,096 VND

1 Piece(s) Available Same day 19.1[Glass Fiber] Glass Fiber0.75333.3835

63,540 VND

54,009 VND

4 Piece(s) Available 8 Day(s) 25.4[Glass Fiber] Glass Fiber1333.3835

91,853 VND

78,075 VND

4 Piece(s) Available 8 Day(s) 38.1[Glass Fiber] Glass Fiber1.5333.3835

35,777 VND

30,410 VND

1 Piece(s) Available Same day 12.7[Glass Fiber] Glass Fiber0.5342.936

44,471 VND

37,800 VND

4 Piece(s) Available 8 Day(s) 19.1[Glass Fiber] Glass Fiber0.75342.936

56,783 VND

48,266 VND

1 Piece(s) Available Same day 25.4[Glass Fiber] Glass Fiber1342.936

81,485 VND

69,262 VND

4 Piece(s) Available 8 Day(s) 38.1[Glass Fiber] Glass Fiber1.5342.936

28,633 VND

24,338 VND

1 Piece(s) Available Same day 12.7[Glass Fiber] Glass Fiber0.5361.9538

43,001 VND

36,551 VND

4 Piece(s) Available 8 Day(s) 19.1[Glass Fiber] Glass Fiber0.75361.9538

59,665 VND

50,715 VND

4 Piece(s) Available 8 Day(s) 25.4[Glass Fiber] Glass Fiber1361.9538

86,003 VND

73,103 VND

4 Piece(s) Available 8 Day(s) 38.1[Glass Fiber] Glass Fiber1.5361.9538

46,142 VND

39,221 VND

1 Piece(s) Available Same day 12.7[Glass Fiber] Glass Fiber0.538140

48,625 VND

41,331 VND

1 Piece(s) Available Same day 19.1[Glass Fiber] Glass Fiber0.7538140

62,172 VND

52,846 VND

4 Piece(s) Available 8 Day(s) 25.4[Glass Fiber] Glass Fiber138140

89,746 VND

76,284 VND

4 Piece(s) Available 8 Day(s) 38.1[Glass Fiber] Glass Fiber1.538140

28,671 VND

24,370 VND

4 Piece(s) Available 8 Day(s) 12.7[Glass Fiber] Glass Fiber0.5390.5341

43,073 VND

36,612 VND

1 Piece(s) Available Same day 19.1[Glass Fiber] Glass Fiber0.75390.5341

45,977 VND

39,080 VND

4 Piece(s) Available 8 Day(s) 25.4[Glass Fiber] Glass Fiber1390.5341

65,472 VND

55,651 VND

4 Piece(s) Available 8 Day(s) 38.1[Glass Fiber] Glass Fiber1.5390.5341

28,671 VND

24,370 VND

1 Piece(s) Available Same day 12.7[Glass Fiber] Glass Fiber0.5400.0542

43,111 VND

36,644 VND

4 Piece(s) Available 8 Day(s) 19.1[Glass Fiber] Glass Fiber0.75400.0542

46,932 VND

39,892 VND

4 Piece(s) Available 8 Day(s) 25.4[Glass Fiber] Glass Fiber1400.0542

66,917 VND

56,879 VND

4 Piece(s) Available 8 Day(s) 38.1[Glass Fiber] Glass Fiber1.5400.0542

Loading...Tải…

  1. 1
  2. 2
  3. 3
  4. 4
  5. 5
  6. NextKế tiếp >>

Basic InformationThông tin cơ bản

Belt Type L Belt Shape Closed End Belt Material Rubber Belt
Belt Tooth Surface Standard (Single Sided) Belt Shape Type Trapezoidal Tooth Profile Circular Type Transmission Torque Regular Torque Transmission

Frequently asked question (FAQ)FAQ

Question:Question: Why is the order model of the timing belt inconsistent with the actual belt label and engraving?
Answer:Answer: Order model is MISUMI product model, the label on the belt or printed model on the belt surface is the belt manufacturer model, which varies with manufacturer, but there will be no influence on the product itself.
Question:Question: The timing belt has been broken after use for a very short period of time. Is there a problem with the quality of the belt?
Answer:Answer: The timing belt is a standard product, and the same batch of products have very few individual quality problems, please refer to P.2875【Main causes of premature breakage and corresponding countermeasures】to troubleshoot the equipment in use.
Question:Question: Can alteration be made to the timing belt?
Answer:Answer: Alteration cannot be made to the circumference of the timing belt, and partial alteration can be made to the width.
Question:Question: What kind of belt is better to use under conditions that require high cleanliness?
Answer:Answer: The use of urethane belts is recommended, which has significantly improved dust drop, compared to the rubber belt.
Question:Question: What are the two main types of timing belts according to their functions? What is the role?
Answer:Answer: Timing belts are mainly divided into transmission type and driving type. For transmission type, the load can be placed on the timing belt surface for transmission. For driving type, no load is carried, and only the role of transmitting torque is played, which is similar to the role of chain.
Question:Question: How to judge or measure whether the belt tension meets the installation requirements?
Answer:Answer: It is recommended that the customer purchase the tension meter by himself and make a judgment according to the calculation formula of the initial design.
Question:Question: Which tooth type of the timing belt has the smallest clearance? What will it affect?
Answer:Answer: The arc tooth type has minimum clearance, which can improve such indicators as positioning accuracy and rigidity.

Check other FAQ (4 items) HideĐóng.

About MISUMIVề Misumi

About this WebsiteVề trang Web này

Useful ToolsCác công cụ hữu ích

Customer ServiceDịch vụ chăm sóc khách hàng

MISUMI Contact Monday to Saturday: 8:00 am - 5:00 pm Order cut off time is 5:00 pm Thứ 2 đến Thứ 7: 8 giờ sáng đến 5 giờ chiều Hạn chót đặt hàng là 5 giờ chiều

  • Tel:Số điện thoại:0222-361-1555
  • Fax:Số Fax:0222-361-2555
  • InquiryYêu cầu

MISUMI APP

MISUMI APP QR

Install MISUMI APP

Mobile View Xem trên điện thoại

MISUMI Vietnam Company Limited, Legal Representative: Tomohiro Watanabe,
phone: 0222-361-1555, e-mail: [email protected], Enterprise Code: 0107514576,
Date of Issuance: 22 July 2016, Place of Issuance: Bac Ninh, Business Certificate No. 6573041568-KD dated 27 September 2016 issued by the People's Committee of Bac Ninh

Công ty TNHH MISUMI Việt Nam, Đại diện theo pháp luật: Tomohiro Watanabe,
Điện thoại: 0222-361-1555, e-mail: [email protected], Mã số doanh nghiệp: 0107514576,
ngày cấp 22/7/2016, nơi cấp: Bắc Ninh, Giấy phép kinh doanh số: 6573041568-KD ngày cấp 27/9/2016 bởi UBND tỉnh Bắc Ninh

online.gov.vn

Copyright © MISUMI Corporation All Rights Reserved.