Can the economy series adjuster, flat bottom type with glue, be used on inclined ground?

Please use the economy series adjuster, flat bottom type with glue, on flat ground and try not to use it on inclined ground, which will cause deformation of the adjuster.

Does the economy series adjuster, flat bottom type with glue, have a height adjustment knob?

The economy series adjuster, flat bottom type with glue, does not have a height adjustment knob (handle) and is just a general adjuster.

(!) Since support from Microsoft will end on January 14th, 2020, Windows 7 will be excluded from the recommended environment from December 15th, 2019 on this site. Vì lý do Microsoft kết thúc hỗ trợ cho Windows 7 vào ngày 14/01/2020, Windows 7 sẽ là hệ điều hành không được khuyến khích sử dụng với trang web này từ ngày 15/12/2019.

Tel: 0222-361-1555 Email: [email protected] 8:00 - 17:00 (Mon - Sat)

ものづくりの、明日を支える。MISUMI-VONA 生産材コマースものづくりの、明日を支える。MISUMI-VONA 生産材コマース

Webcode Seach | Series: #CODE

Keyword suggestionsTừ khóa gợi ý

Part number suggestionsGợi ý mã sản phẩm

Discontinued Products

Search by Category / Brand Tìm theo danh mục, nhãn hiệu

Search by Category Tìm theo danh mục

[Thông báo] Cập nhật địa chỉ kho tập kết hàng hóa tại khu vực miền Nam của MISUMI Việt Nam. Xem chi tiết.
[Announcement] Update on warehouse address in the Southern region of MISUIMI Vietnam. See more. 
[Cảnh Báo] Thủ Đoạn Lừa Đảo Từ Nhân Viên Giao Hàng – Yêu Cầu Trả Phí Ship. Xem chi tiết.
[Warning] Fraud Calling from Shipper - Asking to Pay Shipping Fee. See more.

How can we improve?

How can we improve?

Comments

Name (Optional)

E-mail Address (Optional)

Tel (Optional)

While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
Customer Privacy Policy

Thank you for your cooperation.

While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
Please use the inquiry form.

Customer Privacy Policy

ConfigureTạo

Part number has not been determine

(1 Part Numbers Available)

Configure Remaining SpecificationsĐịnh cấu hình các thông số còn lại

Part Number CompleteĐã hoàn thành

C-CFJGN12-80

type Width D Allowable Load (Details) Screw Length A Main Body Height E Nominal of Thread M Thread Length A CAD Days to Ship

Specification/DimensionsĐặc điểm kỹ thuật / Kích thướcĐặc điểm kỹ thuật / Kích thước

type
- C-CFJGN
ClearTrống
Width D(mm)
45

70

80
ClearTrống
Allowable Load (Details)(kN)
2.1

2.3

3.5

3.7

3.9

4.6

4.9

5

6.7

7.7
ClearTrống
Screw Length A(mm)
60

80

100

120

150

200
ClearTrống
Main Body Height E(mm)
81

102.5

111

122.5

131

135

151

155

185

188

238
ClearTrống
Nominal of Thread M(mm)
8

10

12

16

20
ClearTrống
Thread Length A(mm)
60

80

100

120

150

200
ClearTrống
CADCAD
- 2D
- 3D
ClearTrống

Days to ShipSố ngày giao hàng

Alltất cả các

Same day
ClearTrống

Specify AlterationsChỉ định thay đổi

Leveling Mounts Bottom Flat With Rubber (C-CFJGN12-80)

Click this image to zoom it.Nhấp vào hình ảnh này để phóng to.

Move the mouse over or click the image to zoom

Volume Discount

Check FAQ of this product (2 items)

Brand :

MiSUMi Economy

Order Qty :
Total Price :

---
Days to ship :

---

Select part number to Order Now/ Add to Cart

CAD Download

(i)
Caution

thận trọng

**RoHS Compliant is available for some part numbers.
Please contact with MISUMI for detail effective date.
Please note: for MISUMI VIETNAM: Thread material of M8 is changed from steel to stainless steel. Selling price is unchaged.

Product Description

- Economy series Leveling Mounts Bottom Flat with Rubber.
- Type: Adjusting Bolt with Rubber Foot.
- The part number is C-CFJGN.
- Body Material: Q235 Carbon Steel.
- Body Surface Treatment: Zinc Plating solution.
- Bottom Pads Part: Rubber.
- Nominal of Thread size (M): 8, 10, 12, 16 and 20.
- Thread Length size: 60, 80, 100, 120, 150 and 200 mm.
- Screw is smooth and can be manually for assembly.
- This is an economy series; The price is cheaper than the MISUMI standard product.

Economy Flat Rubber Mount

Flat bottomZinc platingLeveling

- High-quality Q235 carbon steel construction

- Durable synthetic rubber bottom pad

- Zinc plating for corrosion resistance

- Screw with various thread size options

- Ideal for leveling and stabilizing heavy equipment

MISUMI Standard

Cheaper Price

Product Variety

3D CAD
3D CAD Support

Adjuster Product Overview

Economy series Adjuster Flat bottom type with glue
An adjuster with high quality, cheap price and excellent cost performance

Economy series Adjuster Flat bottom type with glue

Adjuster Product Feature

【Adjuster Features】
No height adjustment knob.

【Material Table】

Type	A Body		B Glue Part
Type	Material	Surface Treatment	Material
C-CFJGN	Q235	Zinc Plating	Rubber

Note: The below material information is for VIETNAM only:

Adjuster Usage Method

Recommended adjuster mounting method
On the premise of ensuring safety, raise the equipment with a forklift (light equipment can roll the equipment sideways) to a height that is convenient to screw into the inner teeth.
Screw in the adjuster through threads. After assembling the required number of adjusters, lower the forklift and adjust horizontally.

Adjuster Precautions
1. Check whether the screw can be mounted with female thread (it is recommended to re-tap after coating the threads).
2. The selection adjuster should be screwed in more than half of the thread as far as possible (the shorter thread screwed in, the greater the bearing capacity).
3. For heavy equipment, it is recommended to add lubricating grease to threads for easy adjustment.

Example of Use Adjuster

Economy series Adjuster Flat bottom type with glue

Dimensional Adjuster Drawing


Economy series Adjuster Flat bottom type with glue

Adjuster Specification Table

Part Number			L	D	ℓ1	ℓ2	E	B	H	Vertical Load （kN）	Weight (g)
Type	M	A
C-CFJGN	8	60	81	45	5.5	6.5	15.5	13	6	2.07	130
	10	80	102.5		7	8		17		2.25	170
		100	122.5							2.34	181
	12	80	111	70	8	10	23	19	7	3.51	220
		100	131							3.69	234
		120	151							3.87	250
	16	100	135	80	10	13	25	24	8	4.59	374
		120	155							4.86	410
		150	185							5.04	453
	20	150	188		13	16		30		6.66	624
		200	238							7.65	722

Note: Thread size follows standard GB5782-1986 with below tolerance, please refer:

Part Number

Incomplete part number.
Please use left hand selections to complete a part number.Incomplete part number.
Please use left hand selections to complete a part number.

Loading...Tải…

: 30; 45; 60

Part Number
C-CFJGN12-80

Part Number	Price	Minimum Order Qty.	Volume Discount	Days to ShipSố ngày giao hàng	Width D (mm)	Allowable Load (Details) (kN)	Screw Length A (mm)	Main Body Height E (mm)	Nominal of Thread M (mm)	Thread Length A (mm)
	31,177 VND	1 Piece(s)	Available	Same day	70	3.5	80	111	12	80

Loading...Tải…

Basic InformationThông tin cơ bản

Type	Adjusting Bolt Type	Adjusting Bolt Shape Type	Rubber Foot Type	Height Adjusting Handle	Not Provided
Thread Material	Steel	Thread Surface Treatment	Galvanizing	Body Material	Steel
Main Body Surface Treatment	Galvanizing	Rubber Material	Synthetic Rubber	Properties	Standard
Swivel Mechanism	Not Provided

Please check the type/dimensions/specifications of the part C-CFJGN12-80 in the Leveling Mounts Bottom Flat With Rubber series.Vui lòng kiểm tra kiểu/kích thước/thông số kỹ thuật của phần C-CFJGN12-80 trong chuỗi Leveling Mounts Bottom Flat With Rubber.

The specifications and dimensions of some parts may not be fully covered. For exact details, refer toCác thông số kỹ thuật và kích thước của mã sản phẩm có thể không được bao phủ đầy đủ. Để biết chi tiết chính xác, hãy tham khảo manufacturer catalogsdanh mục nhà sản xuất ..

Frequently asked question (FAQ)FAQ

Question:Question: Can the economy series adjuster, flat bottom type with glue, be used on inclined ground?: Answer:Answer: Please use the economy series adjuster, flat bottom type with glue, on flat ground and try not to use it on inclined ground, which will cause deformation of the adjuster.
Question:Question: Does the economy series adjuster, flat bottom type with glue, have a height adjustment knob?: Answer:Answer: The economy series adjuster, flat bottom type with glue, does not have a height adjustment knob (handle) and is just a general adjuster.

Products like this...

Part Number
C-CFJGN10-80
C-CFJGN12-100
C-CFJGN12-120
C-CFJGN16-100
C-CFJGN16-120
C-CFJGN16-150

Standard Unit Price	Minimum order quantity	Volume Discount	Days to ShipSố ngày giao hàng	Width D (mm)	Allowable Load (Details) (kN)	Screw Length A (mm)	Main Body Height E (mm)	Nominal of Thread M (mm)	Thread Length A (mm)
20,913 VND	1 Piece(s)	Available	Same day	45	2.3	80	102.5	10	80
32,588 VND	1 Piece(s)	Available	Same day	70	3.7	100	131	12	100
34,087 VND	1 Piece(s)	Available	Same day	70	3.9	120	151	12	120
40,270 VND	1 Piece(s)	Available	Same day	80	4.6	100	135	16	100
42,514 VND	1 Piece(s)	Available	Same day	80	4.9	120	155	16	120
44,102 VND	1 Piece(s)	Available	Same day	80	5	150	185	16	150

Top of the page

About MISUMIVề Misumi

About this WebsiteVề trang Web này

Useful ToolsCác công cụ hữu ích

Customer ServiceDịch vụ chăm sóc khách hàng

MISUMI Contact Monday to Saturday: 8:00 am - 5:00 pm Order cut off time is 5:00 pm Thứ 2 đến Thứ 7: 8 giờ sáng đến 5 giờ chiều Hạn chót đặt hàng là 5 giờ chiều

Tel:Số điện thoại:0222-361-1555
Fax:Số Fax:0222-361-2555
InquiryYêu cầu

MISUMI APP

Install MISUMI APP

MISUMI Vietnam Company Limited, Legal Representative: Tomohiro Watanabe,
phone: 0222-361-1555, e-mail: [email protected], Enterprise Code: 0107514576,
Date of Issuance: 22 July 2016, Place of Issuance: Bac Ninh, Business Certificate No. 6573041568-KD dated 27 September 2016 issued by the People's Committee of Bac Ninh

Công ty TNHH MISUMI Việt Nam, Đại diện theo pháp luật: Tomohiro Watanabe,
Điện thoại: 0222-361-1555, e-mail: [email protected], Mã số doanh nghiệp: 0107514576,
ngày cấp 22/7/2016, nơi cấp: Bắc Ninh, Giấy phép kinh doanh số: 6573041568-KD ngày cấp 27/9/2016 bởi UBND tỉnh Bắc Ninh