What kind of thread does model C-AC0806H match?

Buffer model C-AC0806H, product with M8 thread and 6 mm stroke, where the thread type is M8X1.0, please note that the product is fine thread.

Is the model C-AC0806L a product with a lid, is the lid connected with thread?

Buffer model C-AC0806L, the lid is press-fit type, not of thread connection, and cannot be disassembled by yourself.

(!) Since support from Microsoft will end on January 14th, 2020, Windows 7 will be excluded from the recommended environment from December 15th, 2019 on this site. Vì lý do Microsoft kết thúc hỗ trợ cho Windows 7 vào ngày 14/01/2020, Windows 7 sẽ là hệ điều hành không được khuyến khích sử dụng với trang web này từ ngày 15/12/2019.

Tel: 0222-361-1555 Email: [email protected] 8:00 - 17:00 (Mon - Sat)

ものづくりの、明日を支える。MISUMI-VONA 生産材コマースものづくりの、明日を支える。MISUMI-VONA 生産材コマース

Webcode Seach | Series: #CODE

Keyword suggestionsTừ khóa gợi ý

Part number suggestionsGợi ý mã sản phẩm

Discontinued Products

Search by Category / Brand Tìm theo danh mục, nhãn hiệu

Search by Category Tìm theo danh mục

[Thông báo] Cập nhật địa chỉ kho tập kết hàng hóa tại khu vực miền Nam của MISUMI Việt Nam. Xem chi tiết.
[Announcement] Update on warehouse address in the Southern region of MISUIMI Vietnam. See more. 
[Cảnh Báo] Thủ Đoạn Lừa Đảo Từ Nhân Viên Giao Hàng – Yêu Cầu Trả Phí Ship. Xem chi tiết.
[Warning] Fraud Calling from Shipper - Asking to Pay Shipping Fee. See more.

How can we improve?

How can we improve?

Comments

Name (Optional)

E-mail Address (Optional)

Tel (Optional)

While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
Customer Privacy Policy

Thank you for your cooperation.

While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
Please use the inquiry form.

Customer Privacy Policy

ConfigureTạo

Part number has not been determine

(1 Part Numbers Available)

Configure Remaining SpecificationsĐịnh cấu hình các thông số còn lại

Part Number CompleteĐã hoàn thành

C-AD1612-SC

Structure Orifice Type Body Material Max. Collision Velocity Overall Length Equivalent Mass Max. Absorbed Energy (per Minute) type Stroke Nominal Mounting Screw [M] Max. Absorbed Energy Cap Mating Accessories 1 - Stopper Nut CAD Days to Ship

Specification/DimensionsĐặc điểm kỹ thuật / Kích thướcĐặc điểm kỹ thuật / Kích thước

Structure
- Adjustable Type
  - Adjustable
ClearTrống
Orifice Type
Single Orifice

Irregular Multi Orifice
ClearTrống
Body Material
- Steel
  - STKM11A
ClearTrống
Max. Collision Velocity(m/s)
2.5

3

3.2

3.5

3.6

4

4.2
ClearTrống
Overall Length(mm)
81

89.5

95.2

107.2

133

137

142

143.5

148.8

152.8

154

157.8

162

183

221.5

245.5

246

246.5

343
ClearTrống
Equivalent Mass(kgf)
35

90

120

140

150

210

298

312

450

480

720

780

800

1400

1450

4200
ClearTrống
Max. Absorbed Energy (per Minute)(J/min)
360

410

420

440

460

530

580

650

1100

1200

1300

1500

1630

1800

2100
ClearTrống
type
- C-AD□□□□
- C-AD□□□□-N
ClearTrống
Stroke(mm)
10

12

15

16

20

25

40

50

80
ClearTrống
Nominal Mounting Screw [M]
12

14

16

20

25

27

36

42
ClearTrống
Max. Absorbed Energy(J)
12

21

22

25

28

34

39

85

90

98

100

150

300

500
ClearTrống
Cap
- Not Provided
- Provided
ClearTrống
Mating Accessories 1 - Stopper Nut
- Not Provided
- Provided
ClearTrống
CADCAD
- 2D
- 3D
ClearTrống

Days to ShipSố ngày giao hàng

Alltất cả các

Same day

8 Day(s) or Less

11 Day(s) or Less
ClearTrống

Specify AlterationsChỉ định thay đổi

Shock Absorbers, Adjustable Damping (C-AD1612-SC)

Volume Discount

Check FAQ of this product (2 items)

Brand :

Order Qty :
Total Price :

---
Days to ship :

---

Select part number to Order Now/ Add to Cart

CAD Download

(i)
Caution

thận trọng

**RoHS Compliant is available for some part numbers.
Please contact with MISUMI for detail effective date.

Product Description

- Shock Absorbers, Adjustable Damping Type from MISUMI
- Simple structure and easy installation.
- Miniaturized design and strong space adaptability.
- Absorb energy smoothly and softly.
- Extend mechanical life, The service life of Shock Absorbers from MISUMI is up to 800,000 times.
- Max. Collision Velocity(m/s): 4 m/s
- Operating Environment Temperature: -5 to 70℃
- The products of M14 are equipped with two anti-loosening washers, and the mounting hole effectively prevents loosening without tapping.

Shock Absorber - Adjustable Damping

Adjustable DampingHigh Max Collision VelocityTemperature Range

- Adjustable damping feature allows fine-tuning of the absorption capacity, ensuring optimal performance for various applications.

- Capable of handling collision velocities up to specified maximum.

- Operates effectively within specified temperature range.

- Designed for a long service life, with up to 800,000 cycles. Reduces the need for frequent replacements, lowering maintenance costs and downtime.

- The miniaturized design allows for easy integration into tight spaces without compromising functionality. Maximizes space utilization, making it suitable for compact machinery and equipment.

Economy Shock Absorber - Adjustable Damping

Shock Absorbers Product Overview

Oil buffer Adjusting type
For the speed change of moving objects, the adjuster can be used to adjust the most appropriate buffering absorption capacity corresponding to it, and the locking device is adopted to ensure the accuracy and effectiveness of the adjuster. With a complete check valve action, the spring can make the piston rod quickly reset.

The advantages of using oil buffers:
1. Improve Shock Absorbers production efficiency: equipment can be operated at high frequency and high speed to improve production efficiency because the oil buffer can stop the impact object smoothly.
2. Extend mechanical life: the buffer can absorb the energy generated by the impact, greatly reduce the impact and vibration caused by the object to the machine, and avoid damage due to impact vibration.
3. Improve product quality: the buffer eliminates the shock caused by impact objects and the damaging impact, allowing the smooth operation of the machine and equipment, and improving the product quality.
4. Significantly reduce noise, and provide a quiet working environment.
5. Improve the Shock Absorbers safety of mechanical running.
Economic type Oil pressure buffer Adjustable type

Economic type Oil pressure buffer Adjustable type

Shock Absorbers Product Feature

1. Simple structure and easy installation.
2. Miniaturized design and strong space adaptability.
3. Shock Absorbers energy smoothly and softly.
4. Abundant stock and fast delivery.
5. Long life with 800,000 times being used for reference.
6. The Shock Absorbers products of M14 are equipped with two anti-loosening washers, and the mounting hole effectively prevents loosening without tapping.

Specifications Shock Absorbers Overview

■ The Shock Absorbers products are divided into
C-AD**** (with cover type)
C-AD****- N (without cover type)

■Shock Absorbers Model description
Economic type Oil Buffer Adjusting Type Specifications Overview

Economic type Oil Buffer Adjusting Type Specifications Overview

Example of Shock Absorbers Use

Economic type Oil pressure buffer Fixed type Example of Use

Drawings of Examples of Shock Absorbers Use are for informational purposes only

Shock Absorbers Precautions

1. Do not exceed the specified locking torque value during installation as shown in the following Shock Absorbers table for details:

Coarse Outer Diameter (mm)	M4x0.5	M6x0.75	M8x1.0	M10x1.0	M12x1.0	M14x1.5	M20x1.5	M25x1.5	M36x1.5	M42x1.5
Tightening torque of nut (N.m)	0.35	0.85	3.9	7.8	7.8	9.8	29.4	49	98	392

2. Pay attention to check whether the head circlip is off.
■ Overloaded buffer will cause abnormal increase in the internal pressure of the buffer tube, making the head circlip off, and internal parts may pop up and cause injury.
■ When the buffer with the head circlip is working, please keep your face and other parts away from it.

3. Please pay attention to the splash of the broken buffer head due to impact.
■ Overload use will cause damage to the head, resulting in injury.
■ It is recommended to install an anti-splashing cover.

4. Please pay attention to lateral misalignment load and lateral misalignment angle.
■ When the lateral misalignment load exceeds ±2.5 degrees, it will cause piston rod bending, bad reset, and internal lateral misalignment friction, resulting in performance degradation and even product breakage.
Please aim at the center line of the buffer piston rod for impact. (If the lateral misalignment angle is greater than ±2.5 degrees, please use the angular misalignment Shock Absorbers (the range of lateral misalignment:± within 10 degrees)

5. Operating Temperature Range
■ Please use the buffer within the specified temperature range.
▪ Use outside the specified range will reduce the life of the seal packing and the pressure accumulating sponge, and cause the buffer to break.

6. Operating Environment Requirements
■ Please do not use it under medium or high pressure in a vacuum environment.
■ Keep the guide shaft clean, and avoid cutting powder, cutting fluid, water, etc. from being attached to the guide shaft, otherwise it will cause seal damage, oil leakage, poor buffer action, and buffer damage.
※ If you need to use it in the cutting fluid environment, please choose Misumi’s cutting fluid resistant buffer series products. See Misumi's official website.

7. Shock Absorbers The buffering oil inside the buffer will cause pollution to the environment, and can not be handled at will. Please follow the pollutant treatment method for treatment.

8. To prevent the buffer from increasing lateral load, the distance between the installation position of the buffer and the fulcrum should be equal to or greater than 6 times of the buffer stroke.
And when the side load and the buffer center line form an angle of 5°, the absorbed energy is the maximum.

MISUMI Economic type Oil Buffer Adjusting Type

Dimensional Shock Absorbers Drawing

Shock Absorbers Dimensional Drawing of Oil Buffers		Dimensional Drawing of Anti-loosening Gaskets
		M14 buffers are equipped with 2 anti-loosening gaskets

Specification Shock Absorbers Table

■ Specification Shock Absorbers Table of Oil Buffers

Part Number		Cap	Stopper Nut	Mounting Screw Nominal (M)	Stroke (S)	Max. Energy Absorbed(E')		Max. Equivalent Mass (me’) (kg)	Max. Collision Velocity (M/S)	Length (L)		L₁	L₂	T	t	d	d₁	B (Both Surfaces Width)
Type	No.	Cap	Stopper Nut	Mounting Screw Nominal (M)	Stroke (S)	Per Cycle (J)	Per Minute (J)	Max. Equivalent Mass (me’) (kg)	Max. Collision Velocity (M/S)	Cap provided	Cap not provided	L₁	L₂	T	t	d	d₁	B (Both Surfaces Width)
C-AD	1210	- (Provided) N (Not Provided)	SC (Provided) - (Not Provided)	M12×1.0	10	12	360	35	3	89.5	81	61	10	4	8.5	10.5	3	14
	1412			M14×1.5	12	21	410	90	2.5	107.2	95.2	70.2	13	5	12	12	4	19
	1415				15	22	440	120	3.2	129	117	89
	1425				25	28	460	140		154	142	104
	1612			M16×1.5	12	22	420	150		107.2	95.2	70.2				14
	2016			M20×1.5	16	25	530	210	3	148.8	133	104		8	15.8	18	6	26
	2020				20	34	580	298	3.6	152.8	137	100	17
	2025				25	39	650	312	3.6	157.8	142	100	17
	2525			M25×1.5	25	85	1100	450	3.5	162	143.5	106	12.5	10	18.5	22	8	32
	2540				40	100	1300	780	3.5	221.5	－	132	12.5		37
	2550				50	98	1630	720	4.2	246.5		100	78		18.5
	2580				80	150	2100	800	4.2	343			144.5
	2725			M27×1.5	25	90	1200	480	3.5	162	143.5		18.5
	3625			M36×1.5	25	150	1500	1400	3.2	183	－	101	22	15	25	35	10	46
	3650			M36×1.5	50	300	1800	1450	3.5	246	－	149	22	15	25	35.5	10	46

For larger sizes, see the Economy series Shock Absorbers, Heavy Load Absorption Type catalog page

Shock Absorbers Impact Speed	Maximum Collision Velocity	Operating environment temperature	Reference number of replacements
Adjusting type	～4.2m/s	-5~70℃	800,000 times

■ Specifications Shock Absorbers Table for Anti-loosening Gaskets

Double-sided tooth disc gaskets
Part number	D	d	t	H
M14	21.2	14.6	1.5	2.0

Part Number

Incomplete part number.
Please use left hand selections to complete a part number.Incomplete part number.
Please use left hand selections to complete a part number.

Loading...Tải…

: 30; 45; 60

Part Number
C-AD1612-SC

Part Number	Price	Minimum Order Qty.	Volume Discount	Days to ShipSố ngày giao hàng	Structure	Stroke (mm)	Nominal Mounting Screw [M]	Max. Absorbed Energy (J)	Orifice Type	Body Material	Max. Collision Velocity (m/s)	Overall Length (mm)	Equivalent Mass (kgf)	Max. Absorbed Energy (per Minute) (J/min)	Cap	Mating Accessories 1 - Stopper Nut
	536,379 VND	1 Piece(s)	Available	8 Day(s)	-	12	16	22	-	-	-	-	-	-	Provided	Provided

Loading...Tải…

Basic InformationThông tin cơ bản

Main Body, Related Components	Main Body	Operating Environment	Standard	Operating Temperature Range(°C)	-5::70

Please check the type/dimensions/specifications of the part C-AD1612-SC in the Shock Absorbers, Adjustable Damping series.Vui lòng kiểm tra kiểu/kích thước/thông số kỹ thuật của phần C-AD1612-SC trong chuỗi Shock Absorbers, Adjustable Damping.

The specifications and dimensions of some parts may not be fully covered. For exact details, refer toCác thông số kỹ thuật và kích thước của mã sản phẩm có thể không được bao phủ đầy đủ. Để biết chi tiết chính xác, hãy tham khảo manufacturer catalogsdanh mục nhà sản xuất ..

Frequently asked question (FAQ)FAQ

Question:Question: What kind of thread does model C-AC0806H match?: Answer:Answer: Buffer model C-AC0806H, product with M8 thread and 6 mm stroke, where the thread type is M8X1.0, please note that the product is fine thread.
Question:Question: Is the model C-AC0806L a product with a lid, is the lid connected with thread?: Answer:Answer: Buffer model C-AC0806L, the lid is press-fit type, not of thread connection, and cannot be disassembled by yourself.

Products like this...

Part Number
C-AD1210-SC
C-AD1412
C-AD1412-N
C-AD2016
C-AD2016-N
C-AD2016-N-SC

Standard Unit Price	Minimum order quantity	Volume Discount	Days to ShipSố ngày giao hàng	Structure	Stroke (mm)	Nominal Mounting Screw [M]	Max. Absorbed Energy (J)	Orifice Type	Body Material	Max. Collision Velocity (m/s)	Overall Length (mm)	Equivalent Mass (kgf)	Max. Absorbed Energy (per Minute) (J/min)	Cap	Mating Accessories 1 - Stopper Nut
470,157 VND	1 Piece(s)	Available	8 Day(s)	-	10	12	12	-	-	-	-	-	-	Provided	Provided
332,921 VND	1 Piece(s)	Available	Same day	[Adjustable Type] Adjustable	12	14	21	Single Orifice	[Steel] STKM11A	2.5	107.2	90	410	Provided	Not Provided
332,911 VND	1 Piece(s)	Available	Same day	[Adjustable Type] Adjustable	12	14	21	Single Orifice	[Steel] STKM11A	2.5	95.2	90	410	Not Provided	Not Provided
496,670 VND	1 Piece(s)	Available	Same day	[Adjustable Type] Adjustable	16	20	25	Single Orifice	[Steel] STKM11A	3	148.8	210	530	Provided	Not Provided
496,619 VND	1 Piece(s)	Available	Same day	[Adjustable Type] Adjustable	16	20	25	Single Orifice	[Steel] STKM11A	3	133	210	530	Not Provided	Not Provided
584,971 VND	1 Piece(s)	Available	8 Day(s)	-	16	20	25	-	-	-	-	-	-	Not Provided	Provided

Top of the page

About MISUMIVề Misumi

About this WebsiteVề trang Web này

Useful ToolsCác công cụ hữu ích

Customer ServiceDịch vụ chăm sóc khách hàng

MISUMI Contact Monday to Saturday: 8:00 am - 5:00 pm Order cut off time is 5:00 pm Thứ 2 đến Thứ 7: 8 giờ sáng đến 5 giờ chiều Hạn chót đặt hàng là 5 giờ chiều

Tel:Số điện thoại:0222-361-1555
Fax:Số Fax:0222-361-2555
InquiryYêu cầu

MISUMI APP

Install MISUMI APP

MISUMI Vietnam Company Limited, Legal Representative: Tomohiro Watanabe,
phone: 0222-361-1555, e-mail: [email protected], Enterprise Code: 0107514576,
Date of Issuance: 22 July 2016, Place of Issuance: Bac Ninh, Business Certificate No. 6573041568-KD dated 27 September 2016 issued by the People's Committee of Bac Ninh

Công ty TNHH MISUMI Việt Nam, Đại diện theo pháp luật: Tomohiro Watanabe,
Điện thoại: 0222-361-1555, e-mail: [email protected], Mã số doanh nghiệp: 0107514576,
ngày cấp 22/7/2016, nơi cấp: Bắc Ninh, Giấy phép kinh doanh số: 6573041568-KD ngày cấp 27/9/2016 bởi UBND tỉnh Bắc Ninh

Search by Category / Brand Tìm theo danh mục, nhãn hiệu

Search by Category Tìm theo danh mục

How can we improve?

ConfigureTạo

Specification/DimensionsĐặc điểm kỹ thuật / Kích thướcĐặc điểm kỹ thuật / Kích thước

Structure

Orifice Type

Body Material

Max. Collision Velocity(m/s)

Overall Length(mm)

Equivalent Mass(kgf)

Max. Absorbed Energy (per Minute)(J/min)

type

Stroke(mm)

Nominal Mounting Screw [M]

Max. Absorbed Energy(J)

Cap

Mating Accessories 1 - Stopper Nut

CADCAD