(!) Since support from Microsoft will end on January 14th, 2020, Windows 7 will be excluded from the recommended environment from December 15th, 2019 on this site. Vì lý do Microsoft kết thúc hỗ trợ cho Windows 7 vào ngày 14/01/2020, Windows 7 sẽ là hệ điều hành không được khuyến khích sử dụng với trang web này từ ngày 15/12/2019.
Tel: 0222-361-1555
Email: [email protected]
8:00 - 17:00 (Mon - Sat)
Search by Category / Brand Tìm theo danh mục, nhãn hiệu
Search by Category Tìm theo danh mục
- [Thông báo] Cập nhật địa chỉ kho tập kết hàng hóa tại khu vực miền Nam của MISUMI Việt Nam. Xem chi tiết.
[Announcement] Update on warehouse address in the Southern region of MISUIMI Vietnam. See more. - [Cảnh Báo] Thủ Đoạn Lừa Đảo Từ Nhân Viên Giao Hàng – Yêu Cầu Trả Phí Ship. Xem chi tiết.
[Warning] Fraud Calling from Shipper - Asking to Pay Shipping Fee. See more.
Product DetailSpecification/DimensionsĐặc điểm kỹ thuật / Kích thướcĐặc điểm kỹ thuật / Kích thước
-
Applicable Frame Width(mm)
-
type
- HBLFSSW8-45
-
Mounting Hole Alteration for Covers
- C (Tap for Cover Mounting)
- Not Provided
-
Accessory
- Not Provided
- SEC (Screws with Captured Washers and Nuts Set)
- SEP (Screws, Post-Assembly Insertion Spring Nuts Set)
- SET (Screws, Nuts Set)
- SEU (Screws, Pre-Assembly Insertion Spring Nuts Set)
- SSP (Set of Stainless Steel Screw and Post-assy. Insertion Spring Nut)
- SST (Set of Stainless Steel Screws and Nuts)
- SSU (Set of Stainless Steel Screws and Pre-Assembly Insertion Spring Nuts)
-
CADCAD
- 2D
- 3D
Days to ShipSố ngày giao hàng
-
- Alltất cả các
- Same day
- 4 Day(s) or Less
Specify AlterationsChỉ định thay đổi
8-45 Series (Groove Width 10 mm) - For 1-Row Groove - Reversing Bracket With Protrusion, 4-Mounting Hole Type (HBLFSSW8-45-C-SSU)
Click this image to zoom it.Nhấp vào hình ảnh này để phóng to.
Move the mouse over or click the image to zoom
- Volume Discount
Copy Part Number URL to Clipboard
The part number URL has been copied into your clipboard.
-
- From :
- 100,299VND/Unit
-
- Order Qty :
-
-
- Total Price :
- ---
-
- Days to ship :
- ---
Select part number to Order Now/ Add to Cart
Similar Products
Product DetailProduct Description
A bracket with 2 mounting holes on 1 side. You can connect the frame more firmly.
Dimensional Drawing of 90 degree Brackets
HBLFSSW8-45
Specification Table of 90 degree Brackets
| Model |
| HBLFSSW8-45 |
・To check the latest price, please click the "Check Price" button after confirming the model number.
| Model | Mass (g) | Suitable bolts and T-nuts | Allowable load (N) | |||
| bolt | Quantity | T-Nut | Quantity | |||
| HBLFSSW8-45 | 136 | CBM8-20 | 4 | HNTT8-8 | 4 | 3087 |
Additional Processing of 90 degree Brackets
| Model | − | (C・SET・SST・SEU・SSU・SEP・SSP・SEC) |
| HBLFSSW8-45 | − | SET |
| HBLFSSW8-45 | − | C-SET |
| Alterations | Code | Spec. | Applicable bracket |
| Additional cover mounting holes | C | The 90 degree Brackets is tapped for mounting the cover (M5 on both sides) (Mounting screws are HCBM) .  | HBLFSN8-45 |
| HBLFSNB8-45 | |||
| HBLFSNM8-45 | |||
| CHBLFSN8-45 | |||
| HBLFSN8-50 | |||
| HBLFSNK8-45 | |||
| HBLFSNE8−45 | |||
| HBLFSSW8-45 |
| Alterations | Code | Spec. | Applicable bracket | |||||||||||||||||||||||||||||||||
| Applicable bolts and nuts included | SET SST (stainless steel) SEU (pre- assembly spring nut) SSU (pre-assembly spring nut stainless steel) SEP (post- assembly spring nut) SSP (post-assembly spring nut stainless steel) SEC ( bolt and nut with washer ) | The applicable bolts and nuts for attaching the bracket to the frame are included in the set. (Added to the bracket price) (Example) When HBLFSN8-45 is specified
[ ! ] When specifying a part other than HBLFSN8-45, please check the appropriate bolts and nuts. | − | |||||||||||||||||||||||||||||||||
| HBLFSN8-45 | ||||||||||||||||||||||||||||||||||||
| HBLFSNB8-45 | ||||||||||||||||||||||||||||||||||||
| HBLFSNM8-45 | ||||||||||||||||||||||||||||||||||||
| CHBLFSN8-45 | ||||||||||||||||||||||||||||||||||||
| HBLFSN8-50 | ||||||||||||||||||||||||||||||||||||
| HBLFSNK8-45 | ||||||||||||||||||||||||||||||||||||
| HBLFSNE8−45 | ||||||||||||||||||||||||||||||||||||
| HBLFSNT8-45 | ||||||||||||||||||||||||||||||||||||
| HBLFSSW8-45 | ||||||||||||||||||||||||||||||||||||
! ] When specifying -SET, -SEU, or -SEP with a bracket other than the black anodized bracket, the included bolts are not RoHS compliant.
Additional Processing Details of 90 degree Brackets
■ Hole processing for cover installation (-C) of 90 degree Brackets
M5 tapped holes can be added on both sides.
Example of additional processing model: HBLFSSW8-45-C
■ Details 90 degree Brackets of applicable bolt and nut sets
| Additional processing model | bolt | nut | ||||
|---|---|---|---|---|---|---|
| Model | Material | type | Model | Material | Stopper | |
| SET | CBM8-20 | iron | First in | HNTT8-8 | iron | none |
| SST | SCB8-20 | stainless | First in | HNTTSN8-8 | stainless | none |
| SEU | CBM8-20 | iron | First in | HNTU8-8 | iron | Yes |
| SSU | SCB8-20 | stainless | First in | SHNTU8-8 | stainless | Yes |
| SEP | CBM8-20 | iron | Later insertion | HNTP8-8 | iron | Yes |
| SSP | SCB8-20 | stainless | Later insertion | SHNTP8-8 | stainless | Yes |
| SEC | HCBST8-24 | Iron (with washer) | First in | HNTT8-8 | iron | none |
How to Use of 90 degree Brackets
Features of 90 degree Brackets: This type has a protrusion that fits into the frame groove.
The protrusion acts as a rotation stopper during fastening work, making it easy to work with.
Technical Information of 90 degree Brackets
■ 90 degree Brackets allowable load concept
here indicates the load at which the 90 degree Brackets can maintain its position (without breaking or slipping) when all mounting holes on the bracket are fixed with bolts and a load is applied.
How to Install the Washer Bolt (-SEC) of 90 degree Brackets
■ How to install bolts with spring washers (-SEC) of 90 degree Brackets
This product requires more care when tightening than other series of spring washer bolt sets, as the bolt head interferes with the bolt.
We will introduce how to install it.
STEP 1 Installation sequence
STEP 2 Tightening the hexagonal bolts
Of the two holes, installation will be done through the hole mentioned above.
STEP 3 Adjust the position of the spring washer on the bolt
, the heads of the previously tightened bolts
will interfere and installation will be impossible.
Finally, tighten the hex bolt by twisting it.
In cases where it is difficult to pre-tighten one side, we recommend using the following product.
<Alternative> HBLFSSW8-45-SET,
which changes the bolts without changing the bracket (changes the bolt and nut set that is suitable for additional processing)
Similar Products of 90 degree Brackets
■ 90 degree Brackets with protrusion
There is a protrusion on the mounting surface to prevent rotation.
| Product name | Bracket with protrusions (2x the number of holes) | Inverted bracket with protrusion | Bracket with protrusion on one side | Bracket with cover | Triangle Bracket |
|---|---|---|---|---|---|
| Product Photos |
|
| No protrusions on one side, can be connected to plate
|
|
|
| Material | ADC12 | ADC12 | ADC12 | ADC12 | A6N01SS?T |
| Features | This large-size type uses twice as many bolts, allowing for a stronger connection to the frame. | The mounting surface has a protrusion, making it easy to position when mounting. This is the most conventional type. | The protrusion is on one side only and is useful when connecting frames/plates. | This type is equipped with a dustproof cover. Dust does not accumulate inside, making it hygienic. | This bracket has two mounting holes on one side, allowing for a more solid connection to the frame. |
| Representative Model | This product | HBLFSN8-45 | HBLFSNK8-45 | HBLFSNT8-45 | HBLDSWT8-45 |
Related Items of 90 degree Brackets
■ 8-45 Series of 90 degree Brackets
| Product name | Aluminum frame | Blind Joint | Frame cap | Groove cover | nut |
|---|---|---|---|---|---|
| photograph |
|
|
|
|
|
| Product page | Here | Here | Here | Here | Here |
Part Number
- Incomplete part number.
Please use left hand selections to complete a part number.Incomplete part number.
Please use left hand selections to complete a part number.
| Part Number |
|---|
| HBLFSSW8-45-C-SSU |
| Part Number | Price | Minimum Order Qty. | Volume Discount | Days to ShipSố ngày giao hàng | RoHS | Applicable Frame Width (mm) | Mounting Hole Alteration for Covers | Accessory |
|---|---|---|---|---|---|---|---|---|
248,976 VND | 1 Piece(s) | Available | 4 Day(s) or more | - | - | C (Tap for Cover Mounting) | SSU (Set of Stainless Steel Screws and Pre-Assembly Insertion Spring Nuts) |
Loading...Tải…
Basic InformationThông tin cơ bản
| Bracket Tape | Tabbed Brackets | Additional Functions (Tabbed Bracket) | Standard | Tab Position | Tabbed at Both Sides |
|---|---|---|---|---|---|
| Number of the Applicable Slots | 1 Slot | Perpendicularity | No Standard | Series | MISUMI Brackets for 8-45 Series (Extrusion Slot Width 10mm) |
| Material | ADC12 | Extrusion Series | HFS | Extrusion No. | 8 |
| Extrusion Size | For 45, 90, 100 | Bracket Type | Tabbed Reversal Brackets | Applicable Screws | M8 Screws |
| Number of Extrusion Connection Holes | 4 |
Please check the type/dimensions/specifications of the part HBLFSSW8-45-C-SSU in the 8-45 Series (Groove Width 10 mm) - For 1-Row Groove - Reversing Bracket With Protrusion, 4-Mounting Hole Type series.Vui lòng kiểm tra kiểu/kích thước/thông số kỹ thuật của phần HBLFSSW8-45-C-SSU trong chuỗi 8-45 Series (Groove Width 10 mm) - For 1-Row Groove - Reversing Bracket With Protrusion, 4-Mounting Hole Type.
- The specifications and dimensions of some parts may not be fully covered. For exact details, refer toCác thông số kỹ thuật và kích thước của mã sản phẩm có thể không được bao phủ đầy đủ. Để biết chi tiết chính xác, hãy tham khảo manufacturer catalogsdanh mục nhà sản xuất ..
Products like this...
| Part Number |
|---|
| HBLFSSW8-45-C-SEP |
| HBLFSSW8-45-C-SET |
| HBLFSSW8-45-C-SEU |
| HBLFSSW8-45-SEC |
| HBLFSSW8-45-SEP |
| HBLFSSW8-45-SET |
| Part Number | Standard Unit Price | Minimum order quantity | Volume Discount | Days to ShipSố ngày giao hàng | RoHS | Applicable Frame Width (mm) | Mounting Hole Alteration for Covers | Accessory |
|---|---|---|---|---|---|---|---|---|
208,106 VND | 1 Piece(s) | Available | 4 Day(s) or more | - | - | C (Tap for Cover Mounting) | SEP (Screws, Post-Assembly Insertion Spring Nuts Set) | |
190,798 VND | 1 Piece(s) | Available | 4 Day(s) or more | - | - | C (Tap for Cover Mounting) | SET (Screws, Nuts Set) | |
208,106 VND | 1 Piece(s) | Available | 4 Day(s) or more | - | - | C (Tap for Cover Mounting) | SEU (Screws, Pre-Assembly Insertion Spring Nuts Set) | |
222,911 VND | 1 Piece(s) | Available | 4 Day(s) or more | 10 | - | Not Provided | SEC (Screws with Captured Washers and Nuts Set) | |
194,760 VND | 1 Piece(s) | Available | 4 Day(s) or more | - | - | Not Provided | SEP (Screws, Post-Assembly Insertion Spring Nuts Set) | |
177,244 VND | 1 Piece(s) | Available | 4 Day(s) or more | - | 45 ～ 200 | Not Provided | SET (Screws, Nuts Set) |
How can we improve?
How can we improve?
While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
Customer Privacy Policy
Thank you for your cooperation.
While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
Please use the inquiry form.
Customer Privacy Policy